Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Broadband RF-distribution amplifier

Radio frequency amplifier to distribute reference frequencies within communications systems and provide automatic gain control with low phase distortion is described. Use of photocell in electronic circuit to produce desired conditions is explained. Operation of entire amplifier circuit is analyzed.

Lutes, G. F., Jr.↗
NASA NTRS1972

Preparation of pigments for space-stable thermal control coatings

The identification and control of vapor phase reaction kinetics to produce pigments by homogeneous nucleation were achieved. A vapor phase apparatus was designed, fabricated, and calibrated through 1800 C. Vapor phase reactions were analyzed, calculations made, and powders of alumina, rutile, zinc orthotitanate (in a mixed phase), calcium tungstate, and lanthana were produced by homogeneous nucleation. Electron microscopy shows uniform particle morphology and size, and supports anticipated advantages of vapor-phase homogeneous nucleation; namely, purity, freedom from defects, and uniform particle sizing without grinding.

Campbell, W. B.↗
NASA NTRS1974

Optimal space communications techniques

Digital multiplication of two waveforms using delta modulation (DM) is discussed. It is shown that while conventional multiplication of two N bit words requires N2 complexity, multiplication using DM requires complexity which increases linearly with N. Bounds on the signal-to-quantization noise ratio (SNR) resulting from this multiplication are determined and compared with the SNR obtained using standard multiplication techniques. The phase locked loop (PLL) system, consisting of a phase detector, voltage controlled oscillator, and a linear loop filter, is discussed in terms of its design and system advantages. Areas requiring further research are identified.

Schilling, D. L.↗
NASA NTRS1975

The propagation of plane waves and higher order acoustic modes in multisectioned ducts

A theoretical and experimental study of acoustic propagation in an anechoically terminated multisectioned duct was performed. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial as well as circumferential direction, was developed to generate plane waves and both spinning and non-spinning higher order modes. Measurement of attenuation and radial mode shapes were taken with various finite length liners inserted between the hard wall sections of a duct with an anechoic termination. A search technique was developed to find the complex eigenvalues for a liner under the assumption of a locally reacting boundary condition. The experimental results were compared with a theoretical analysis which includes the modal transmission and reflection at the interface of each duct section, and this indicated that the local reaction boundary condition is valid for three liner configurations.

Wyerman, B. R.↗
NASA NTRS1976

A Theoretical and Experimental Study of Acoustic Propagation in Multisectioned Circular Ducts

The propagation of plane waves and higher order acoustic modes in a circular multisectioned duct was studied. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial, as well as circumferential direction, was developed to generate plane waves and both spinning and nonspinning higher order modes. Measurements of attenuation and radial mode shapes were taken with finite length liners inserted between the hard wall sections of an anechoically terminated duct. Materials tested as liners included a glass fiber material and both sintered fiber metals and perforated sheet metals with a honeycomb backing. The fundamental acoustic properties of these materials were studied with emphasis on the attenuation of sound by the liners and the determination of local versus extended reaction behavior for the boundary condition. A search technique was developed to find the complex eigenvalues for a liner under the assumption of a locally reacting boundary condition.

Wyerman, B. R.↗
NASA NTRS1976

Position error propagation in the simplex strapdown navigation system

The results of an analysis of the effects of deterministic error sources on position error in the simplex strapdown navigation system were documented. Improving the long term accuracy of the system was addressed in two phases: understanding and controlling the error within the system, and defining methods of damping the net system error through the use of an external reference velocity or position. Review of the flight and ground data revealed error containing the Schuler frequency as well as non-repeatable trends. The only unbounded terms are those involving gyro bias and azimuth error coupled with velocity. All forms of Schuler-periodic position error were found to be sufficiently large to require update or damping capability unless the source coefficients can be limited to values less than those used in this analysis for misalignment and gyro and accelerometer bias. The first-order effects of the deterministic error sources were determined with a simple error propagator which provided plots of error time functions in response to various source error values.

Source record↗
NASA NTRS1976

The propagation and attenuation of complex acoustic waves in treated circular and annular ducts

The propagation of plane waves and higher order acoustic modes in a circular multisectioned duct was studied. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial, as well as circumferential direction, was developed to generate plane waves and both spinning and nonspinning higher order modes. Measurements of attenuation and radial mode shapes were taken with finite length liners between the hard wall sections of an anechoically terminated duct. Materials tested as liners included a glass fiber material and both sintered fiber metals and perforated sheet metals with a honeycomb backing. The fundamental acoustic properties of these materials were studied with emphasis on the attenuation of sound by the liners and the determination of local versus extended reaction behavior for the boundary condition. The experimental results were compared with a mathematical model for the multisectioned duct.

Reethof, G.↗
NASA NTRS1976

Polarization compensator for optical communications

An optical data communication system is provided whereby two orthogonal polarization states of a light beam carrier correspond to digital states. In such a system, automatic polarization compensation is provided by applying a dither modulating voltage to a cell exhibiting the electro-optic effect. The cell controls the relative phase of electric field components of an input light beam enabling the dither frequency component of the difference of the instantaneous powers in the two polarization states to be coherently detected. A signal derived from the coherent detection process is fed back to the cell via an integrator to form polarization bias compensating servo loop ot Type 1.

Fitzmaurice, M. W.↗
NASA NTRS1975

Atmosphere explorer /AE-C/ adaptive mission design and trajectory performance

The preflight mission design and in-flight execution are presented to illustrate the actual utilization of the adaptive nature of this mission. Spacecraft systems (propulsion, attitude, accelerometer) and software (maneuver program) features which contribute to the adaptive trajectory flexibility are discussed. Descriptions of procedures used to handle low perigee maneuver operations (to 130 km), for achieving ground track control and orbit phasing, for making a transition from elliptical to circular orbits, and for circular orbit restoration and maintenance are presented in detail. The 85 maneuvers made during the first 17 months of the mission are summarized.

Barbieri, R. W.↗
NASA NTRS1978

Angle detector

An angle detector for determining a transducer's angular disposition to a capacitive pickup element is described. The transducer comprises a pendulum mounted inductive element moving past the capacitive pickup element. The capacitive pickup element divides the inductive element into two parts L sub 1 and L sub 2 which form the arms of one side of an a-c bridge. Two networks R sub 1 and R sub 2 having a plurality of binary weighted resistors and an equal number of digitally controlled switches for removing resistors from the networks form the arms of the other side of the a-c bridge. A binary counter, controlled by a phase detector, balances the bridge by adjusting the resistance of R sub 1 and R sub 2. The binary output of the counter is representative of the angle.

Parra, G. T.↗