Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Amorphous zinc–molybdenum–sulfide chalcogel as a long-cycle, high-capacity electrode for lithium-ion batteries

The inherent limitations of intercalation-based electrodes in lithium-ion batteries have prompted the search for alternative materials with higher specific capacities and robust electrochemical stability. Sulfur-based electrodes, despite their high theoretical capacities (1672 mAh g −1 ), typically suffer from poor cycling performance. In this work, zinc molybdenum polysulfide (Zn x Mo 3 S 13 , 0.5 ≤ x), an amorphous semiconductor chalcogel, exhibits high specific capacity and excellent cycling stability. Synchrotron X-ray pair distribution function and extended X-ray absorption fine structure analyses reveal a short-range atomic structure comprising Mo–Mo, M–S (M = Mo, Zn), and S–S bonding motifs. The coordination environment of Mo and S closely resembles that of Mo 3 S 13 clusters, interconnected via S–S bridges and Zn 2+ cations. The Li/Zn x Mo 3 S 13 cell delivers an initial discharge capacity of 844 mAh g −1 at C/3, and retains 386.2 mAh g −1 after 1000 cycles with an average coulombic efficiency of 99.99%. The distribution of relaxation times analysis confirms the formation of a stable solid electrolyte interphase, which underpins the cell's long-term stability. In conclusion, this outstanding performance is attributed to the synergistic effects of the chalcogel's unique amorphous framework, semiconductive character, Zn-mediated polysulfide anchoring, and structural resilience, positioning Zn x Mo 3 S 13 chalcogel among the most durable pure metal sulfide cathodes reported for next-generation LIBs.

36 MATERIALS SCIENCE↗

Comparison of the Arrhenius parameters between conventional hydrothermal and microwave-assisted synthesis methods for tin oxide nanoparticles

Microwave (MW) irradiation has emerged as a powerful tool for accelerating materials synthesis, yet the origins of its specific influence on reaction kinetics remain elusive. While multiple studies have attributed the observed enhancements in reaction rates under MW heating to reduced activation energies, other accounts have suggested modifications to the Arrhenius pre-exponential factor as the predominant cause. Distinguishing between these parameters in modern applications of MW processing in nanomaterials requires experimental approaches capable of resolving the dynamic and nuanced structural kinetics that govern MW-assisted chemistry. Here, we combine in-situ synchrotron X-ray total scattering with pair distribution function (PDF) analysis to track the structural evolution of SnO 2 nanoparticles synthesized via MW-assisted and conventional hydrothermal conditions. Avrami modeling and Arrhenius analysis suggest that although MW irradiation yields a higher apparent activation energy, the enhanced crystallization is better explained by a pre-exponential factor several orders of magnitude larger than that of conventional heating. These findings suggest that the MW field induces a higher frequency of successful molecular rearrangements rather than lowering the intrinsic activation barrier. The results contribute further insights clarifying the role of the applied MW field for materials design where MW-specific effects can be deliberately harnessed. Furthermore, this work presents a framework promoting the utility of in-situ PDF characterization coupled with kinetic analysis for developing more sophisticated descriptions of nanoscale transformations for MW-driven reaction kinetics.

36 MATERIALS SCIENCE↗

In situ electric field X-ray total scattering reveals composition-dependent electromechanical strain mechanisms in (1 − x )BiFe 2/8 Ti 3/8 Mg 3/8 O 3 – x PbTiO 3 ceramics

Ferroelectric materials find many applications in energy and aerospace industries. A major challenge for ferroelectric materials is maintaining their properties at elevated temperatures. The (1 − x )BiFe 2/8 Ti 3/8 Mg 3/8 O 3 – x PbTiO 3 (BFTM–xPT) ferroelectric solid solution is a promising candidate for high-temperature applications as it has a high piezoelectric response while also maintaining its ferroelectric phase until a high Curie temperature (T C ) of 650 °C. In this work, we investigate the piezoelectric mechanism in BFTM–xPT, a novel high-T C ferroelectric ceramic. To elucidate the origin of its enhanced piezoelectric performance, relative to other piezoceramics of similar T C , in situ electric field X-ray total scattering experiments were performed. Total scattering combines Bragg scattering (diffraction) and diffuse scattering (pair distribution function), providing insight on various length scales. With information spanning different length scales, extrinsic contributions (i.e., domain wall motion and interphase boundary motion) can be separated from intrinsic contributions (i.e., piezoelectric lattice strain). We show that, for compositions within the morphotropic phase boundary (MPB, x = 0.325), the piezoelectric response is dominated by intrinsic piezoelectric lattice strain, whereas outside the MPB (x = 0.375) the major component of the piezoelectric response is from extrinsic mechanisms including an electric-field-induced phase transition and tetragonal domain wall motion. This article reveals that the origin of piezoelectric response in BFTM–xPT is composition-dependent and shows that high-performance materials may also be located outside the MPB. These findings can help guide material design to optimize properties for specific applications.

Richtik, Brooke N. [University of Calgary, AB (Can↗

Structural investigation of amorphous materials at high pressures

A modified diamond anvil cell (DAC) is used for structural studies of amorphous materials at high pressures using a monochromatic synchrotron x-ray beam. The DAC modification includes (1) the use of x-ray transparent seats for a large angular opening for x-ray scattering, and (2) the introduction of a boron gasket insert to increase the sample thickness and to minimize the gasket-hole deformation. A procedure for absorption correction and background subtraction in DAC experiments is described, together with an optimization process for obtaining accurate data of the structure factor and the corresponding pair distribution function. Data for amorphous iron at 67 GPa are presented for demonstration. It is shown that quantitative structural data can be determined for amorphous materials at very high pressures using the DAC. The apparatus should be also useful for structural studies of liquids at high pressures.

43 PARTICLE ACCELERATORS↗

High Resolution PDF Measurements on Ag Nanoparticles

The quantitative analysis of structural defects in Ag nanoparticles was addressed in this work. We performed atomic scale structural characterization by a combination of x-ray diffraction (XRD) using the Pair Distribution Function analysis (PDF) and High Resolution Transmission Electron Microscopy (HRTEM). The XRD measurements were performed using an innovative instrumentation setup to provide high resolution PDF patterns.

36 MATERIALS SCIENCE↗

Towards a better understanding of the structure of nano-minerals at ambient and extreme conditions

The high-pressure (HP) behavior of nano-crystalline mackinawite (n-FeS) with particle sizes of 6, 7, and 8 nm has been investigated by high-energy X-ray total scattering and pair distribution function analysis. An irreversible first-order structural phase transition from tetragonal mackinawite to orthorhombic FeS-II was observed at about 3 GPa. The transition is induced by the closure of the van-der-Waals gap in the layered mackinawite structure. A grain size effect on the transition pressure and the compressibility was observed. The n-FcS study is an example of a broad class of nano-crystalline minerals where the total scattering (TS) approach provides significant new information on local-, intermediate- and long-range structure. Under extreme conditions, of pressure in this case, straightforward modifications allow quantitative descriptions of the transformations mechanisms.

36 MATERIALS SCIENCE↗

Direct observations of Ge{sub 2}Sb{sub 2}Te{sub 5} recording marks in the phase-change disk

Atomistic structures of the Ge{sub 2}Sb{sub 2}Te{sub 5} thin film in the real phase-change disk have been investigated using transmission electron microscopy (TEM). As-deposited amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} films were laser-irradiated for initialization (crystallization) and recording. Cross-sectional TEM observations revealed that the recording mark was fully amorphized by laser irradiation. A slight difference between the as-deposited and the laser irradiation-induced amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} was observed in the intensity profile of nanobeam electron diffraction patterns and atomic pair distribution functions. This difference was attributed to structural relaxation of amorphous Ge{sub 2}Sb{sub 2}Te{sub 5}, which gives rise to the alteration of chemical order.

36 MATERIALS SCIENCE↗

Phase transformation of Mg-Fe alloys

An Mg-Fe alloy system prepared through mechanical alloying (MA) was structurally analyzed. MA can produce single-phase bcc alloys using Mg concentrations up to about 15 mol %. Use of conventional average structure analysis and x-ray pair-distribution function method enabled the long-range and short-range order structures of the Mg-Fe alloys to be bridged. The substituted Mg atoms were randomly arranged in the low-Mg composition but started to have an order structure. The partially ordered Mg-Fe alloy undergoes an austenitic (cubic) to martensitic (orthorhombic) phase change, as increasing Mg composition.

36 MATERIALS SCIENCE↗

Non-invasive determination of the parameters of strongly coupled 2D Yukawa liquids

We derive a method for identifying the Yukawa model parameters of two-dimensional (2D) strongly coupled dusty plasmas. The method is based on non-invasive observation of the dust component of the plasma and comparison with a large body of simulation data in the form of simple analytical formulas. This approach requires only input from a time-series of configuration snapshots and particle velocities with no recourse to additional information about the system. In addition, we derive an effective coupling parameter for 2D Yukawa systems based on the height of the first maximum of the pair distribution function. Two variants--one valid in the high-coupling range, the other for arbitrary couplings of the liquid--are derived. Comparison to previous approaches to Yukawa coupling parameters shows that the present concept is more general and more accurate. Our results should be directly applicable as a simple, yet reliable diagnostic method for a variety of experiments, including dusty plasmas, colloidal suspensions, and ions in traps, and can be employed to facilitate comparisons between experiments, theory, and simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement of nanovoid formation in annealed amorphous Al{sub 2}O{sub 3} including W

The effect of W on the nanovoid formation in annealed amorphous Al{sub 2}O{sub 3} was studied by transmission electron microscopy and molecular dynamics simulations. A comparison of the void formation behavior in electron-beam deposited Al{sub 2}O{sub 3} (without W) and resistance-heating deposited Al{sub 2}O{sub 3} (with 10 at. % W) revealed that W enhances the formation and growth of nanovoids. An analysis of the pair distribution function (PDF) in both types of amorphous Al{sub 2}O{sub 3} showed that the introduction of W into amorphous Al{sub 2}O{sub 3} brings about a significant change in the amorphous structure. Furthermore, it was found by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) that sub-nm sized W clusters exist in as-deposited Al{sub 2}O{sub 3} prepared by resistance-heating and then dissolve in the amorphous matrix with annealing. The combination of PDF analysis and HAADF-STEM observation provides evidence that the enhancement of void formation originates in the heterogeneous short-range atomic configurations induced by the addition of W.

36 MATERIALS SCIENCE↗

Study of liquid gallium at high pressure using synchrotron x-ray

Liquid gallium has been studied at high pressure up to 2 GPa and ambient temperature in a diamond anvil cell using high energy synchrotron x-ray beam. The total x-ray scattering data of liquid gallium were collected up to Q = 12 A{sup -1} and analyzed using pair distribution functions (PDF). The results indicate that the first nearest neighbor peak and second nearest neighbor (shoulder) peak of PDF in liquid gallium does not change with pressure, whereas the higher order (i.e., third and fourth) nearest neighbor peaks shift towards shorter distance with increasing pressure. Reverse Monte Carlo modeling based on the observed data shows that the coordination number in the liquid gallium increases with pressure from 10.5 at 0.3 GPa to 11.6 at 2 GPa. An atomic arrangement similar to the crystalline phase of Ga(II) with coordination number of 12 is proposed for the locally dense-packed rigid unit in liquid gallium. The volume compression data derived from the structure modeling yield a bulk modulus of 12.1(6) GPa for liquid gallium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room-temperature magnetoelectric coupling in single-phase BaTiO{sub 3}-BiFeO{sub 3} system

In this paper, single-phase multiferroic ceramics of (1 - x) BaTiO{sub 3}-x BiFeO{sub 3} (BT - x BFO) were synthesized by solid-solution method in the wide range of material composition (x = 0.025 - 1.0). The changes in crystal structure were confirmed via X-ray diffractions (XRD) and atomic pair distribution functions (PDFs). The room-temperature ME coupling was found to exhibit significant magnitude in the narrow composition window (x = 0.71 - 0.8) where the average crystal structure was found to be rhombohedral. Especially, the BT - 0.725 BFO ceramics containing local monoclinic distortions within rhombohedral phase were found to exhibit high room-temperature ME coefficient ({alpha}{sub ME}) of 0.87 mV/cm{center_dot}Oe with high piezoelectric properties (g{sub 33} = 18.5 Multiplication-Sign 10 mV m N{sup -1} and d{sub 33} = 124 pC N{sup -1}). We believe that the high room-temperature ME coupling in single-phase lead-free BT-BFO ceramics provides a possibility of developing electrically or magnetically tunable thin-film devices.

36 MATERIALS SCIENCE↗

Extending plasma transport theory to strong coupling through the concept of an effective interaction potential

A method for extending traditional plasma transport theories into the strong coupling regime is presented. Like traditional theories, this is based on a binary scattering approximation, but where physics associated with many body correlations is included through the use of an effective interaction potential. The latter is simply related to the pair-distribution function. Modeling many body effects in this manner can extend traditional plasma theory to orders of magnitude stronger coupling. Theoretical predictions are tested against molecular dynamics simulations for electron-ion temperature relaxation as well as diffusion in one component systems. Emphasis is placed on the connection with traditional plasma theory, where it is stressed that the effective potential concept has precedence through the manner in which screening is imposed. The extension to strong coupling requires accounting for correlations in addition to screening. Limitations of this approach in the presence of strong caging are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microstructure of sheared monosized colloidal suspensions resulting from hydrodynamic and electrostatic interactions

Hydrodynamic and near-particle interactions in sheared suspensions are communicated through suspension microstructure to produce a wide variety of rheological behaviors. To characterize this microstructure, the individual positions of monosized silica particles flowing through a microchannel are obtained with near simulation-level detail. The pair distribution functions of the microstructure at moderate to high Péclet number shear rates are very similar to previous numerical studies. Viscometric functions calculated based on the detailed microstructure obtained through this technique show qualitative agreement with computational results. These results elucidate the origins of shear-thickening of suspensions at high shear rates. While efforts are taken to screen electrostatic interactions to study hydrodynamic and Brownian interactions, the role of electrostatic interaction between particles is also investigated by reducing suspension ionic strength. These non-hydrodynamic electrostatic interactions result in a loss of anisotropy that generally agrees with previous findings of “soft” particle systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion of oxygen in amorphous Al{sub 2}O{sub 3}, Ta{sub 2}O{sub 5}, and Nb{sub 2}O{sub 5}

The self-diffusivity of oxygen in amorphous Al{sub 2}O{sub 3} (a-Al{sub 2}O{sub 3}), a-Ta{sub 2}O{sub 5}, and a-Nb{sub 2}O{sub 5} was investigated along with structural analysis in terms of pair distribution function (PDF). The low activation energy, ∼1.2 eV, for diffusion in the oxides suggests a single atomic jump of oxygen ions mediated via vacancy-like defects. However, the pre-exponential factor for a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5} with lower bond energy was two orders of magnitude larger than that for a-Al{sub 2}O{sub 3} with higher bond energy. PDF analyses revealed that the short-range configuration in a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5} was more broadly distributed than that in a-Al{sub 2}O{sub 3}. Due to the larger variety of atomic configurations of a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5}, these oxides have a higher activation entropy for diffusion than a-Al{sub 2}O{sub 3}. The entropy term for diffusion associated with short-range structures was shown to be a dominant factor for diffusion in amorphous oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling strength in Coulomb and Yukawa one-component plasmas

In a non-ideal classical Coulomb one-component plasma (OCP), all thermodynamic properties are known to depend only on a single parameter—the coupling parameter Γ. In contrast, if the pair interaction is screened by background charges (Yukawa OCP) the thermodynamic state depends, in addition, on the range of the interaction via the screening parameter κ. How to determine in this case an effective coupling parameter has been a matter of intensive debate. Here we propose a consistent approach for defining and measuring the coupling strength in Coulomb and Yukawa OCPs based on a fundamental structural quantity, the radial pair distribution function (RPDF). The RPDF is often accessible in experiments by direct observation or indirectly through the static structure factor. Alternatively, it is directly computed in theoretical models or simulations. Our approach is based on the observation that the build-up of correlation from a weakly coupled system proceeds in two steps: First, a monotonically increasing volume around each particle becomes devoid of other particles (correlation hole), and second (upon further increase of the coupling), a shell structure emerges around each particle giving rise to growing peaks of the RPDF. Using molecular dynamics simulation, we present a systematic study for the dependence of these features of the RPDF on Γ and κ and derive a simple expression for the effective coupling parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local atomic structure of K{sub x}Na{sub (1−x)}NbO{sub 3} by total x-ray diffraction

Local atomic structure of K{sub x}Na{sub (1−x)}NbO{sub 3} with 0.0 ≤ x ≤ 1.0 was studied using atomic Pair Distribution Function analysis based on x-ray diffraction. Powdered crystals were found to exhibit a re-entrant behavior by being orthorhombic (Amm2) for x < 0.42, monoclinic (Pm) for 0.42 ≤ x ≤ 0.63 and again orthorhombic (Amm2) for x > 0.63. Non-centrosymmetric structure of NaNbO{sub 3} (Amm2) was also evident in the piezoresponse force microscopy analysis revealing the presence of the ferroelectric domains and switching behavior. Lowering of the crystallographic symmetry for 0.42 ≤ x ≤ 0.63 is discussed in terms of differences in the sizes of Na{sup +} and K{sup +} ions and Na–O and K–O bond lengths. Besides being a bridging phase, as suggested by the previous studies on lead-based compositions, present study suggests that lower symmetry monoclinic phase of compositionally disordered perovskite solid solutions could also be a manifestation of the difference in the sizes of constituent ions and bond lengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗