Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of THz-bandwidth incoherent laser radiation on bulk damage in potassium dihydrogen phosphate crystals

Abstract The laser-damage performance characteristics of potassium dihydrogen phosphate (KDP) samples under exposure to a distinctive broadband incoherent laser pulse are investigated. A laser system providing such pulses is intended to explore improved energy-coupling efficiency on the target in direct-drive inertial confinement fusion experiments and provides incoherent bandwidths as large as 10 THz in a nanosecond pulse. A consequence of this bandwidth is very rapid fluctuations in intensity capable of reaching maxima much larger than the average intensity within the pulse. A custom damage-test station has been built to perform measurements with broadband incoherent pulses in order to determine what effect these fast and high-intensity oscillations have on laser damage. A set of experiments under different bandwidth and beam configurations shows the effect to be minimal when probing bulk damage in KDP. Modeling indicates this behavior is supported by long electron-relaxation times compared to the source-field fluctuations, following excitation of individual electrons in the conduction band. The results help better understand the laser-induced–damage mechanisms in KDP, and its ability to operate in broadband temporally incoherent high-energy lasers that may be particularly suitable for future laser-fusion energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultrafast solvent-to-solute proton transfer mediated by intermolecular coherent vibrations

Ultrafast photoinduced excited-state proton transfer (ESPT) plays a crucial role in protecting biomolecules and functional materials from photodamage. However, the influence of solute-solvent interactions on ESPT dynamics remains under active investigation. Here, we present an ultrafast spectroscopic study of ESPT in the photobase 2-(2´-pyridyl)benzimidazole (PBI) in methanol. Ultrafast absorption spectroscopy, supported by quantum chemical calculations, reveals three distinct kinetic steps: (1) a 2.2 ps solvent-to-solute proton transfer, (2) subsequent nonradiative relaxation to the ground state within 31 ps, producing a vibrationally hot ensemble with substantial excess kinetic energy, and (3) equilibration as this energy dissipates into the surrounding solvent bath over 186 ps. Femtosecond-resolved dynamics exhibit oscillatory signals indicative of coherent wavepacket motion on the S 1 potential energy surface. A phase flip in the excited-state absorption maximum confirms this assignment. Fourier analysis resolves two dominant periods (∼117 fs and ∼340 fs), corresponding to in-plane and out-of-plane vibrational modes coupled between PBI and the hydrogen-bonded methanol molecule. The rapid dephasing ( < 300 fs) suggests that the nuclear wavefunction evolves on an anharmonic potential energy surface while traversing the ESPT reaction coordinate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bottom-up fabrication of 2D Rydberg exciton arrays in cuprous oxide

Solid-state platforms provide exceptional opportunities for advancing on-chip quantum technologies by enhancing interaction strengths through coupling, scalability, and robustness. Cuprous oxide (Cu 2 O) has recently emerged as a promising medium for scalable quantum technology due to its high-lying Rydberg excitonic states, akin to those in hydrogen atoms. To harness these nonlinearities for quantum applications, the confinement dimensions must match the Rydberg blockade size, which can reach several microns in Cu 2 O. Using a CMOS-compatible growth technique, this study demonstrates the bottom-up fabrication of site-selective arrays of Cu 2 O microparticles. We observed Rydberg excitons up to the principal quantum number n = 5 within these Cu 2 O arrays on a quartz substrate and analyzed the spatial variation of their spectrum across the array, showing robustness and reproducibility on a large chip. These results lay the groundwork for the deterministic growth of Cu 2 O around photonic structures, enabling substantial light-matter interaction on integrated photonic platforms and paving the way for scalable, on-chip quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

All-vacuum-deposited inorganic cesium lead halide perovskite light-emitting diodes

Polycrystalline CsPbBr 3 thin films are deposited by vacuum co-evaporation of cesium halide and lead halide precursors, leading to uniform pinhole-free morphology and precise control over the film thickness and precursor stoichiometry. By utilizing the organic hole and electron transport layers, all-vacuum-deposited perovskite LEDs are fabricated. The resulting devices exhibit a maximum luminance of 1800 cd/m 2 , a 531 nm emission wavelength peak with a spectral linewidth of 21 nm, and an external quantum efficiency of 1.1%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantum efficiency of InGaN–GaN multi-quantum well solar cells: Experimental characterization and modeling

InGaN-based multi-quantum well (MQW) solar cells are promising devices for photovoltaics (e.g., for tandem solar cells and concentrator systems), space applications, and wireless power transfer. In order to improve the efficiency of these devices, the factors limiting their efficiency and stability must be investigated in detail. Due to the complexity of a MQW structure, compared with a simple pn junction, modeling the spectral response of these solar cells is not straightforward, and ad hoc methodologies must be implemented. In this paper, we propose a model, based on material parameters and closed-formula equations, that describes the shape of the quantum efficiency of InGaN/GaN MQW solar cells, by taking into account the layer thickness, the temperature dependence of the absorption coefficient, and quantum confinement effects. We demonstrate (i) that the proposed model can effectively reproduce the spectral response of the cells; in addition, (ii) we prove that the bulk p-GaN layer absorbs radiation, but the carriers photogenerated in this region do not significantly contribute to device current. Finally, we show that (iii) by increasing the temperature, there is a redshift of the absorption edge due to bandgap narrowing, which can be described by Varshni law and is taken into account by the model, and a lowering in the extraction efficiency due to the increase in recombination (mostly Shockley–Read–Hall) inside the quantum wells, which is also visible by decreasing light intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

A scintillator attenuation spectrometer for intense gamma-rays

A new type of compact high-resolution high-sensitivity gamma-ray spectrometer for short-pulse intense gamma-rays (250 keV to 50 MeV) has been developed by combining the principles of scintillators and attenuation spectrometers. The first prototype of this scintillator attenuation spectrometer (SAS) was tested successfully in Trident laser experiments at LANL. Later versions have been used extensively in the Texas Petawatt laser experiments in Austin, TX, and more recently in OMEGA-EP laser experiments at LLE, Rochester, NY. The SAS is particularly useful for high-repetition-rate laser applications. Furthermore, we give a concise description of the design principles, capabilities, and sample preliminary results of the SAS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Voltage-controlled reversible modulation of colloidal quantum dot thin film photoluminescence

Active modulation of quantum dot thin film photoluminescence (PL) has been far-reaching potential applications in biomedical and optoelectronic systems, but challenges remain in achieving large PL modulation depth and fast temporal response. Here, we report an efficient voltage-controlled optical down-converter by optically exciting a colloidal quantum dot thin film within a quantum dot light-emitting diode under reverse bias. Utilizing field-induced luminescence quenching, we show that a large electric field can strongly modify carrier dynamics in this nanostructured device, resulting in stable and reversible photoluminescence quenching. The device exhibits photoluminescence reduction of up to 99.5%, corresponding to a contrast ratio of 200:1 under the applied electric field of 3 MV cm -1 with a 300 ns response time. Using excitation wavelength dependent and transient PL spectroscopy, we further show that the high degree of quenching is achieved by a synergistic interplay of quantum-confined Stark effect and field-induced exciton dissociation.

42 ENGINEERING↗
DOE OSTI2022

Observation of the surface layer of lithium metal using in situ spectroscopy

In this work, we have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carbonates. When lithium metal is exposed to room air (~50% moisture), in situ real-time monitoring of optical spectra indicates that the surface layer grows at a rate of approximately 24 nm/min, presumably driven by an interface-controlled process. Our results hint that surface-layer-free lithium metals are formidable to achieve by a simple cleaning/polishing method, suggesting that the initial interface between lithium metal electrodes and solid-state electrolytes in fabricated lithium metal batteries can differ from an ideal lithium/electrolyte contact.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of a 1D-imaging high-energy x-ray backlighter driven by the National Ignition Facility Advanced Radiographic Capability laser

Plastic deformation of samples compressed to Mbar pressures at high strain rates at the National Ignition Facility (NIF) forms the basis of ongoing material strength experiments in conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. Hard x-ray radiography is the primary means of measuring the evolution of these samples, typically employing a slit-collimated high-Z microdot driven by the NIF laser to generate >40 keV x rays [E. Gumbrell et al., Rev. Sci. Instrum. 89, 10G118 (2018) and C. M. Huntington et al., Rev. Sci. Instrum. 89, 10G121 (2018)]. Alternatively, a dysprosium “micro-flag” target driven by the Advanced Radiographic Capability laser (~2 kJ, 10 ps) can deliver significantly higher spatiotemporal resolution [M. P. Hill et al., Rev. Sci. Instrum. 92, 033535 (2021)], especially in high-opacity samples. Here, initial experiments revealed problematic brightness and spectral gradients from this source, but by radiographing a set of diamond-turned, 105 µm-thick Pb test objects and supported by simulations using the 3D Monte Carlo code GEANT4, these geometry-dependent gradients across the field of view are quantified and mitigation strategies are assessed. In addition to significantly enhancing the modulation transfer function compared to the existing system, image stacking from multiple layers of image plate is shown to almost double the signal to noise ratio that will reduce uncertainties in future dynamic strength experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

A beamline for ultrafast extreme ultraviolet magneto-optical spectroscopy in reflection near the shot noise limit

High harmonic generation (HHG) makes it possible to measure spin and charge dynamics in materials on femtosecond to attosecond timescales. However, the extreme nonlinear nature of the high harmonic process means that intensity fluctuations can limit measurement sensitivity. Here we present a noise-canceled, tabletop high harmonic beamline for time-resolved reflection mode spectroscopy of magnetic materials. We use a reference spectrometer to independently normalize the intensity fluctuations of each harmonic order and eliminate long term drift, allowing us to make spectroscopic measurements near the shot noise limit. Here, these improvements allow us to significantly reduce the integration time required for high signal-to-noise (SNR) measurements of element-specific spin dynamics. Looking forward, improvements in the HHG flux, optical coatings, and grating design can further reduce the acquisition time for high SNR measurements by 1–2 orders of magnitude, enabling dramatically improved sensitivity to spin, charge, and phonon dynamics in magnetic materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Photostability of blue phosphorescent films on plasmonic surfaces

Organometallic phosphors are an important class of emissive materials used in high-efficiency organic light-emitting devices. However, problems of low photostability arise for blue-emitting phosphors due to chemical and environmental degradation and triplet quenching processes. Various approaches have been developed to improve the photostability of such phosphors, including the design of new organometallic molecules and control of host-dopant composition in thin films. Here, we demonstrate a different approach for improving the photostability of blue organometallic phosphors that uses localized surface plasmon resonances to increase the triplet recombination rate. The increased recombination rate improves the photostability of the phosphor due to the reduction in triplet quenching pathways. We show that the lifetime of phosphorescence is decreased significantly by nanoparticle-based plasmonic surfaces, which improves the photostability of the blue organometallic phosphor by up to a factor of 3.6. Other plasmonic surfaces are also tested and exhibit less significant photostability improvements due to a reduced spectral overlap of the plasmonic modes with the emitter and lower mode confinement. The use of plasmonic surfaces to improve phosphor photostability at blue wavelengths is distinct from other approaches because it involves modification to the local electromagnetic environment of the phosphor rather than modifications to the phosphor molecular structure or the emitting material composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As determined by variable-angle spectroscopic ellipsometry

The optical constants of single-crystal Al x Ga 1-x P and Al x Ga 1-x As have been widely studied at various Al compositions but have not yet been thoroughly investigated as polycrystalline materials. Using variable-angle spectroscopic ellipsometry, we estimate and analyze the optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As that were non-epitaxially deposited at deposition temperatures of either 250 or 420 °C, and with various dopant species, dopant concentrations, and V/III flux ratios. Here, for wavelengths of 350–400 nm, decreasing the V/III ratio increases the refractive index of Be-doped polycrystalline Al 0.25 Ga 0.75 P. For wavelengths >500 nm, as the targeted Be dopant concentration increases for polycrystalline Al 0.25 Ga 0.75 P, the amount the extinction coefficient increases and the indirect bandgap decreases depends on the V/III ratio. Furthermore, Si-doped polycrystalline Al 0.25 Ga 0.75 P has significantly smaller extinction coefficient values than when it is Be-doped, for the same V/III ratio and targeted doping concentration, at wavelengths >500 nm. Based on our findings, we hypothesize that the dopant species, dopant concentration, and the V/III ratio dictate various types of defect concentrations, which then affect the optical constants and indirect bandgap of polycrystalline Al 0.25 Ga 0.75 P. Additionally, for wavelengths >500 nm, we find that polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As have the lowest extinction coefficient values when deposited at 420 °C, as opposed to 250 °C. Thus, we hypothesize that the deposition temperature is the most significant factor in dictating the optical constants of these polycrystalline III-Vs. Ultimately, this work demonstrates alternative methods to tune the optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As, as opposed to tuning the Al composition.

42 ENGINEERING↗
DOE OSTI2023

Mass of a weakly measured photon

Bohmian mechanics has garnered significant attention as an interpretation of quantum theory since the paradigmatic experiments which inferred the average trajectories of photons in the nonrelativistic regime. These experiments were largely motivated by Wiseman's formulation of Bohmian mechanics, which grounded these trajectories in weak measurements. Recently, Wiseman's framework was extended to the relativistic regime by expressing the velocity field of single photons in terms of weak values of the photon energy and momentum. Here, we propose an operational, weak value-based definition for the Bohmian “local mass” of relativistic single particles. For relativistic wave functions satisfying the scalar Klein-Gordon equation, this mass coincides with the effective mass defined by de Broglie in his relativistic pilot-wave theory, a quantity closely connected with the quantum potential that is responsible for Bohmian trajectory self-bending and the anomalous photoelectric effect. Here, we demonstrate the relationship between the photon trajectories and the mass in an interferometric setup.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Sample-Efficient Adaptive Calibration of Quantum Networks Using Bayesian Optimization

All physical systems employed for quantum information tasks must act as unbiased carriers of encoded quantum states. Ensuring such indistinguishability of information carriers is a major challenge in many quantum information applications, including advanced quantum communication protocols. For photons, the workhorses of quantum communication networks, it is difficult to obtain and maintain their indistinguishability because of environment-induced transformations and loss imparted by communication channels, especially in noisy scenarios. Conventional strategies to mitigate these transformations often require hardware or software overhead that is restrictive (e.g., adding noise), infeasible (e.g., on a satellite), or time-consuming for deployed networks. In this work we propose and develop resource-efficient Bayesian optimization techniques to rapidly and adaptively calibrate the indistinguishability of individual photons for quantum networks using only information derived from their measurement. To experimentally validate our approach, we demonstrate the optimization of Hong-Ou-Mandel interference between two photons-a central task in quantum networking- finding rapid, efficient, and reliable convergence towards maximal photon indistinguishability in the presence of high loss and shot noise. We expect our resource-optimized and experimentally friendly methodology will allow fast and reliable calibration of indistinguishable quanta, a necessary task in distributed quantum computing, communications, and sensing, as well as for fundamental investigations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Dynamical model of φ meson photoproduction on the nucleon and 4 He

We investigate φ meson photoproduction on the nucleon and the 4 He targets within a dynamical model approach based on a Hamiltonian which describes the production mechanisms by the Pomeron-exchange, meson-exchanges, φ radiations, and nucleon resonance excitations mechanisms. The final φN interactions are included being described by the gluon-exchange, direct φN couplings, and the box-diagrams arising from the couplings with πN, ρN, KΛ, and KΣ channels. The parameters of the Hamiltonian are determined by the experimental data of γp → φp from the CLAS Collaboration. The resulting Hamiltonian is then used to predict the coherent φ-meson production on the 4 He targets by using the distorted-wave impulse approximation. For the proton target, the final φN rescattering effects, as required by the unitarity condition, are found to be very weak, which supports the earlier calculations in the literature. For the 4 He targets, the predicted differential cross sections are in good agreement with the data obtained by the LEPS Collaboration. Furthermore, the role of each mechanism in this reaction is discussed and predictions for a wide range of scattering angles are presented, which can be tested in future experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Ab initio nucleon-nucleus elastic scattering with chiral effective field theory uncertainties

Effective interactions for nucleon-nucleus elastic scattering from first principles require the use of the same nucleon-nucleon interaction in the structure and reaction calculations and a consistent treatment of the relevant operators at each order. Systematic investigations of the effect of truncation uncertainties of chiral nucleon-nucleon ( N N ) forces have been carried out for scattering observables in the two- and three-nucleons system as well as for bound-state properties of light nuclei. Here we extend this type of study to proton and neutron elastic scattering for 16 O and 12 C. Using the frameworks of the spectator expansion of multiple scattering theory as well as the no-core shell model, we employ one specific chiral interaction from the LENPIC collaboration and consistently calculate the leading-order effective nucleon-nucleus interaction up to the third chiral order, from which we extract elastic scattering observables. Then we apply pointwise as well as correlated uncertainty quantification for the estimation of the chiral truncation error. We calculate and analyze proton elastic scattering observables for 16 O and 12 C as well as neutron elastic scattering observables for 12 C between 65 and 185 MeV projectile kinetic energy. We find in all cases qualitatively similar results for the chiral truncation uncertainties as in few-body systems and assess them using similar diagnostic tools. The order-by-order convergence of the scattering observables for 16 O and 12 C is very reasonable around 100 MeV, while for higher energies the chiral expansion parameter becomes too large for convergence. Comparing proton and neutron differential cross sections reveals that their description is comparable up to around 100 MeV. Here, we also find a nearly perfect correlation between the differential cross section for neutron scattering and the N N Wolfenstein amplitudes for small momentum transfers. The diagnostic tools for studying order-by-order convergence in observables in few-body systems can be employed for observables in nucleon-nucleus scattering with only minor modifications provided the momentum scale in the problems is not too large. We also find that the chiral N N interaction on which our study is based gives a very good description of differential cross sections for 16 O and 12 C as low as 65-MeV projectile energy, particularly in the forward direction. In addition, the very forward direction of the neutron differential cross section mirrors the behavior of the N N interaction amazingly well.

6 ≤ A ≤ 19↗
DOE OSTI2020

Symmetry Breaking and Error Correction in Open Quantum Systems

Symmetry-breaking transitions are a well-understood phenomenon of closed quantum systems in quantum optics, condensed matter, and high energy physics. However, symmetry breaking in open systems is less thoroughly understood, in part due to the richer steady-state and symmetry structure that such systems possess. For the prototypical open system—a Lindbladian—a unitary symmetry can be imposed in a “weak” or a “strong” way. We characterize the possible $\mathbb{Z}_n$ symmetry-breaking transitions for both cases. In the case of $\mathbb{Z}_2$, a weak-symmetry-broken phase guarantees at most a classical bit steady-state structure, while a strong-symmetry-broken phase admits a partially protected steady-state qubit. Viewing photonic cat qubits through the lens of strong-symmetry breaking, we show how to dynamically recover the logical information after any gap-preserving strong-symmetric error; such recovery becomes perfect exponentially quickly in the number of photons. Further, our study forges a connection between driven-dissipative phase transitions and error correction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗