Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Half-life measurement of the 199-keV isomeric state in Ga 76

Background: Isomeric states in atomic nuclei are a sensitive probe of their underlying microscopic structure and can be used to study the evolution of shell structure far from stability. Recent studies have identified and provided detailed spectroscopy of isomers in neutron-rich nuclei with Z = 28-50. Isomeric states in the odd-odd gallium isotopes have been reported for all gallium isotopes from A = 72 to A = 80 with the exception of 76 Ga. Purpose: The purpose of this experiment was to observe short-lived isomeric states in the vicinity of 78 Ni. Methods: In-beam fragmentation of a 86 Kr primary beam at the National Superconducting Cyclotron Laboratory produced radioactive ions which were delivered to and deposited in a Ce Br 3 scintillator coupled to a position-sensitive photomultiplier tube. Beta-delayed γ rays were measured by ancillary HPGe clover and LaBr 3 detectors which surrounded the implantation detector. Results: The previously observed J π = 1 + , 199-keV level in 76 Ga, populated following the β decay of 76 Zn, was identified as isomeric with a half-life of 34(1) stat. (8) sys. ns. Shell-model calculations suggest this state is formed by the coupling of protons in negative-parity configurations to 1/2 - neutron configurations. Transition strengths assuming a ground-state spin of J = 2 and J = 3 were determined from the experimental data.

59 ≤ A ≤ 89↗
DOE OSTI2016

Singlet-paired coupled cluster theory for open shells

Restricted single-reference coupled cluster theory truncated to single and double excitations accurately describes weakly correlated systems, but often breaks down in the presence of static or strong correlation. Good coupled cluster energies in the presence of degeneracies can be obtained by using a symmetry-broken reference, such as unrestricted Hartree-Fock, but at the cost of good quantum numbers. A large body of work has shown that modifying the coupled cluster ansatz allows for the treatment of strong correlation within a single-reference, symmetry-adapted framework. The recently introduced singlet-paired coupled cluster doubles (CCD0) method is one such model, which recovers correct behavior for strong correlation without requiring symmetry breaking in the reference. In this, we extend singlet-paired coupled cluster for application to open shells via restricted open-shell singlet-paired coupled cluster singles and doubles (ROCCSD0). The ROCCSD0 approach retains the benefits of standard coupled cluster theory and recovers correct behavior for strongly correlated, open-shell systems using a spin-preserving ROHF reference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Theoretical Examination of the Hydroxide Transport in Cobaltocenium-Containing Polyelectrolytes

Polymers incorporating cobaltocenium groups have received attention as promising components of anion-exchange membranes (AEMs), exhibiting a good balance of chemical stability and high ionic conductivity. In this work, we analyze the hydroxide diffusion in the presence of cobaltocenium cations in an aqueous environment based on the molecular dynamics of model systems confined in one dimension to mimic the AEM channels. In order to describe the proton hopping mechanism, the forces are obtained from the electronic structure computed at the density-functional tight-binding level. We find that the hydroxide diffusion depends on the channel size, modulation of the electrostatic interactions by the solvation shell, and its rearrangement ability. Hydroxide diffusion proceeds via both the vehicular and structural diffusion mechanisms with the latter playing a larger role at low diffusion coefficients. The highest diffusion coefficient is observed under moderate water densities (around half the density of liquid water) when there are enough water molecules to form the solvation shell, reducing the electrostatic interaction between ions, yet there is enough space for the water rearrangements during the proton hopping. Furthermore, the effects of cobaltocenium separation, orientation, chemical modifications, and the role of nuclear quantum effects are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cluster structure of light nuclei

We review recent studies of the cluster structure of light nuclei within the framework of the algebraic cluster model (ACM) for nuclei composed of k α-particles and within the framework of the cluster shell model (CSM) for nuclei composed of k α-particles plus x additional nucleons. The calculations, based on symmetry considerations and thus for the most part given in analytic form, are compared with experiments in light cluster nuclei. The comparison shows evidence for Z 2 , D 3h and T d symmetry in the even–even nuclei 8 Be (k = 2), 12 C (k = 3) and 16 O (k = 4), respectively, and for the associated double groups Z' 2 and D' 3h in the odd nuclei 9 Be, 9 B (k = 2, x = 1) and 13 C (k = 3, x = 1), respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Involute Working Group – FSI Analysis of Fuel Plates Using Finite Volume and Finite Element Methods

The three involute plate research reactors RHF, HFIR, and FRM II have expressed an interest in using computational software to carry their steady-state safety analysis. Since these tools represent a significant departure from the methods used currently (one-dimensional), the acceptability of the new approach by regulators requires thorough verification and validation of these tools. Therefore, Argonne National Laboratory and the three involute-plate reactors formed an informal group called the Involute Working Group aiming at qualifying computational tools to perform steady-state safety analysis. The present report focuses on a comparison of finite volume and finite element methods to model solids in fluid-structure interaction problems with the goal to estimate the coolant flow-induced fuel plate deflections obtained with the two methods. The finite volume method will be obsoleted in STARCCM+ by the end of 2021, nevertheless, this evaluation is important because the method was used by ANL researchers to model the response of the fuel plates, despite its drawbacks, which are discussed in the report. It was essential to check how those estimates compare to the results obtained with the finite element method that is considered superior for structural analysis. Various geometries, i.e., flat, cylindrical and circle-involute fuel plates, as well as coolant flow speed, were considered. The comparison shows that, independently of the plate geometry, the finite volume method significantly underestimates the deflection as compared to finite element method for coarser meshes. When the discretization is developed as a result of a mesh sensitivity study using finite element method, the result obtained using finite volume method can be a few times smaller than the corresponding finite element method solution. A code-to-code comparison , between STAR-CCM+ and LS-DYNA was included in the analysis. Within the LS-DYNA models, two types of finite element formulations were used: solid and shell finite elements. Mesh sensitivity study showed that both approaches converge to a similar value that was obtained with STAR-CCM+ finite element solver. The evaluation of the computational solvers was extended by adding two benchmark cases from the STAR-CCM+ Verification Suite and presented in the Appendix A. The selected cases are: (1) bending of a cantilever beam under external load, and (2) cylindrical shell deformation analysis, known in the literature as ‘Scordelis-Lo roof’. The problems were solved with finite volume, and finite element methods, and the results confirmed the previously discussed findings. The analysis shows that the finite element solver is superior to the finite volume solver in terms of representation of model geometry and estimating the structural behavior of fuel plates. Depending on the ratio of the load to the flexibility of the plate, the finite volume solver can greatly under- or overestimate the structural response if a very carefully selected mesh is not used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Level scheme study of Mo 91 : Weak-coupling approximation in the N = 50 region

The level scheme of 91 Mo has been studied using the GALILEO γ-ray spectrometer at Laboratori Nazionali di Legnaro, INFN. Five transitions together with four levels are identified for the first time by the γ-γ coincidence measurement, considerably enriching the negative band in 91 Mo. Furthermore, the discrepancy in the previous parity assignments for the states higher than 3807.5 keV has been clarified with the help of new experimental results. A shell-model calculation employing the JUN45 interaction is performed in order to get a further understanding of the level structure of 91 Mo. Being close to N=50 shell closure, the weak-coupling approximation between the valence g 9/2 neutron-hole with the even-even core ( 92 Mo) is discussed in 91Mo.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Impact of pion dynamics on nuclear shell structure

Spin-isospin response in exotic nuclear systems is investigated. It is found that in some nuclei excitations with pionic quantum numbers (0{sup −}, 1{sup +}, 2{sup −}, …) appear at very low energies with large transition probabilities, which is an indication of the vicinity of the onset of pion condensation. As an example, 2{sup −} components of the spin-dipole resonance in {sup 78}Ni and {sup 132}Sn are considered. The existence of such modes points out to the necessity of taking into account their coupling to other elementary modes of excitation, e.g. single-quasiparticle ones. This coupling is introduced in the theory for the first time. Thereby, both rho-meson and pion-exchange contributions to the nucleon-nucleon interaction are included in the relativistic framework beyond the Hartree-Fock approximation. Namely, classes of Feynman diagrams are selected according to their significance for nuclear spectroscopic characteristics, such as single-particle energies and strength functions, and included into the nucleonic self-energy in all orders of meson-exchange. As an illustration, the impact of these new contributions on the single-particle energies of {sup 100}Sn is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Measures of complexity and entanglement in many-fermion systems

There is no unique and widely accepted definition of the complexity measure (CM) of a many-fermion wave function in the presence of interactions. The simplest many-fermion wave function is a Slater determinant. In shell-model or configuration interaction (CI) and other related methods, the state is represented as a superposition of a large number of Slater determinants, which in the case of CI calculations reaches about 20 billion terms [Johnson, arXiv:1809.07869]. Although in practice this number has been used as a CM for decades, it is ill defined: it is not unique, and it depends on the particular type and the number of single-particle wave functions used to construct the Slater determinants. Further, the canonical wave functions and/or natural orbitals [Löwdin, Adv. Phys. 5, 1 (1956); Löwdin and Shull, Phys. Rev. 101, 1730 (1956); Bardeen et al., Phys. Rev. 108, 1175 (1957); N. N. Bogoljubov, Il Nuovo Cimento 7, 794 (1958); Valatin, Il Nuovo Cimento 7, 843 (1958); de Gennes, Superconductivity of Metals and Alloys (CRC Press, Boca Raton, FL, 1999); Ring and Schuck, The Nuclear Many-Body Problem, 1st ed. (Springer-Verlag, Berlin, 2004)] and their corresponding occupation probabilities are intrinsic properties of any many-body wave function, irrespective of the representation, and they provide a unique solution to characterize the CM. The non-negative orbital entanglement entropy, which vanishes for a Slater determinant, provides the simplest CM, while a more complete measure of complexity is the entanglement spectrum. We illustrate these aspects in the case of a complex nonequilibrium time-dependent process, induced nuclear fission described within a real-time density functional theory framework extended to superfluid systems, which can describe simultaneously the long-range and the short-range correlations between fermions. The orbital entanglement entropy of the fissioning nucleus illustrates the localization mechanism of the many-body wave function in Fock and/or Hilbert space. The (minimal) number of Slater determinants required to represent such a complex many-body wave function with a well-defined number of particles in the case presented here is about 10 500 . The realistic case of the highly nonequilibrium nuclear fission process illustrated here is equivalent to a system of 23.328×10 9 interacting quantum spin-1/2 particles, a very large system for the study of quantum entanglement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

The Development of the Corrosion Control Limits for Direct Feed Low-Activity Waste Melter-Off Gas Returns to Hanford Tank Farms - 18196

The Savannah River National Laboratory has been developing a corrosion model to facilitate implementation of Hanford's Direct Feed Low Waste (DFLAW) flowsheet. Laboratory testing and statistical analysis have been used to determine the necessary corrosion controls for returning effluent from the Hanford Waste Treatment and Immobilization Plant's Low Activity Waste Vitrification melter off-gas treatment system to the tank farms. The stream compositions are projected to contain components at relative concentrations that are significantly more corrosive toward carbon steel, specifically halide and sulfate anions, than the current waste compositions in the tank farms. Administrative programs are in place to mitigate potential corrosion mechanisms and thereby maintain the structural and leak integrity functions of these waste tanks throughout their intended service life. Waste chemistry and temperature control are the means by which corrosion degradation of the waste tanks is minimized. The current administrative specification for chemical composition and temperature for the underground carbon steel waste tanks is not designed to control the higher halide or sulfate composition. The content of the DFLAW waste streams will be diverse and depend on several factors, such as the melter feed composition and melter idle time. Other factors, such as effluent management of the off gas water collections, will impact the variability of the return streams even more. The work performed by the Savannah River National Laboratory has confirmed that the halide ions are the most aggressive species in the return stream compositions projected using a flowsheet simulation, and nitrite is the most effective inhibitor at pH 10 and 40 deg. C. This test program has employed statistically designed test matrices to determine the dependent variables and the interaction terms between the variables that are significant for the corrosion model and definition of the corrosion control specifications. The first phase of testing focused on identifying aggressive species in off-gas condensate return compositions that present a propensity for localized corrosion attack, namely pitting corrosion. The second phase of testing focused on developing a corrosion model from the interaction terms that will predict the susceptibility of pitting in the double shell tank system based on waste composition and the required amount of corrosion inhibitor. The data collected from this testing program in conjunction with other testing programs, both at the Savannah River Site and the Hanford Site, along with operations knowledge, has determined the chemistry ranges and chemical species requirements for corrosion control in the Hanford double-shell tank system for the effluents generated in the Hanford Waste Treatment and Immobilization Plant's Low Activity Waste facility during the DFLAW phase of operations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Synthesis of N-Guanidinium-Chitosan/Silica Hybrid Composites: Efficient Adsorbents for Anionic Pollutants

A new chitosan derivative, N-guanidinium chitosan acetate, has been synthesized by direct guanylation of chitosan by cyanamide in presence of scandium(III) triflate under mild acidic condition. Starting from this material, N-guanidinium chitosan/silica microhybrids were prepared via a sol gel method using 3-glycidoxypropyl trimethoxysilane as silica precursor. Both N-guanidinium chitosan and the N-guanidinium chitosan/silica hybrid were characterized by a range of analytical techniques such as {sup 29}Si/{sup 13}C solid state NMR, FT-IR, scanning electron microscopy, thermogravimetry and elemental analysis. The characterization of the chitosan/silica hybrid indicated that this material is a highly hydrophilic nanocomposite material containing an organic core and a highly condensed silica shell. The N-guanidinium chitosan/silica microhybrids display excellent adsorption properties for anionic dyes such as methyl orange (MO) with very high capacities up to 917 mg/g. The fixation of MO as anionic dye was investigated in detail as a function of contact time, pH and the MO concentration. The adsorption kinetics of MO on N-guanidinium chitosan/silica microhybrids was more accurately described by pseudo second-order model. Langmuir isotherm model exhibited a better fit with adsorption data than Freundlich isotherm model. This work opens new possibilities for using N-guanidinium chitosan as a reusable adsorbent for water purification. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ab initio no-core Gamow shell-model calculations of multineutron systems

The existence of multineutron systems has always been a debatable question. Indeed, both internucleon correlations and a large continuum coupling occur in these states. We then employ the ab initio no-core Gamow shell model to calculate the resonant energies and widths of the trineutron and tetraneutron systems with realistic interactions. In this work, our results indicate that trineutron and tetraneutron are both unbound and bear broad widths. The calculated energy and width of tetraneutron are also comparable with recent experimental data. Moreover, our calculations suggest that the energy of trineutron is lower than that of tetraneutron, while its resonance width is also narrower. This strongly suggests that trineutron is more likely to be experimentally observed than tetraneutron. We thus suggest experimentalists to search for trineutron at low energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Direct observation of the exotic β – γ – α decay mode in the T z = – 1 nucleus Na 20

The exotic β – γ – α decay mode of 20 Na has been directly observed for the first time in the Day-one experiment at the Beijing Radioactive Ion-beam Facility. The 20 Na source was produced by using a 100-MeV proton beam bombarding a stack of microporous MgO thick target and delivered as an intense mass separated beam after online ionization. A high-efficiency simultaneous measurement of β, γ, and α transitions enables the β-delayed γ – γ and α – γ coincidence spectroscopy. Here three β – γ – α exotic decay sequences in 20 Na are discovered, which expands the rare decay modes observed in β decay. Moreover, a β – α –decay sequence to the 6130-keV 3 – state of 16 O is observed, which is likely through the 12367-keV 1 + state in 20 Ne. The experimentally deduced B(F) and B(GT) are compared to the shell-model calculation, the allowed β transition strengths can be well accounted for by using sd shell-model space interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

β -decay feeding intensity distribution of Mn 64

Nuclei around the N=40 “Island of Inversion” exhibit interesting structure features that have been the focus of several experimental and theoretical studies. Here, the present work presents the first complete study of the β-decay feeding intensity distribution and Gamow-Teller distribution for the β decay of 64 Mn to 64 Fe up to ~10 MeV. The β-decay intensity function was extracted from Total Absorption Spectroscopy measurements made at the National Superconducting Cyclotron Laboratory with the Summing NaI(Tl) (SuN) detector. The experimental results are compared to shell model calculations with and without the inclusion of the νg 9/2 orbital. From this comparison it is clear that the νg 9/2 orbital is essential for the accurate description of the 64 Fe β-decay strength above ~3 MeV, emphasizing once again the transitional nature of this nucleus into the N=40 Island of Inversion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Energy Flow in Thin Shell Implosions and Explosions

Energy flow and balance in convergent systems beyond petapascal energy densities controls the fate of late-stage stars and the potential for controlling thermonuclear inertial fusion ignition. Timeresolved x-ray self-emission imaging combined with a Bayesian inference analysis is used to describe the energy flow and the potential information stored in the rebounding spherical shock at 0.22 petaPascal (2.2 Gbar or billions of atmospheres pressure). This analysis, together with a simple mechanical model, describes the trajectory of the shell and the time history of the pressure at the fuel-shell interface, ablation pressure, and energy partitioning including kinetic energy of the shell and internal energy of the fuel. The techniques used here provide a fully self-consistent uncertainty analysis of integrated implosion data, a thermodynamic-path independent measurement of pressure in the petaPascal range, and can be used to deduce the energy flow in a wide variety of implosion systems to petapascal energy densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Evidence of coherent $K^{+}$ meson production in neutrino-nucleus scattering

Neutrino-induced charged-current coherent kaon production ν μ A→μ - K + A is a rare, inelastic electroweak process that brings a K + on shell and leaves the target nucleus intact in its ground state. This process is significantly lower in rate than the neutrino-induced charged-current coherent pion production because of Cabibbo suppression and a kinematic suppression due to the larger kaon mass. We search for such events in the scintillator tracker of MINERvA by observing the final state K + , μ - , and no other detector activity, and by using the kinematics of the final state particles to reconstruct the small momentum transfer to the nucleus, which is a model-independent characteristic of coherent scattering. Furthermore, we find the first experimental evidence for the process at 3σ significance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Possibility of 14 C cluster as a building block of medium-mass nuclei

The possibility of the 14 C cluster being a basic building block of medium-mass nuclei is discussed. Although α cluster structures have been widely discussed in the light N ≈ Z mass region, the neutron-to-proton ratio deviates from unity in the nuclei near β-stability line and in neutron-rich nuclei. Thus, more neutron-rich objects with N > Z could become the building blocks of cluster structures in such nuclei. The 14 C nucleus is strongly bound and can be regarded as such a candidate. In addition, the path to the lowest shell-model configuration at short relative distances is closed for the 14 C+ 14 C structure, contrary to the case of the 12 C+ 12 C structure; this allows an appreciable separation distance between the 14 C clusters. The recent development of the antisymmetrized quasicluster model (AQCM) allows us to utilize a j j-coupling shell-model wave function for each cluster in a simplified way. The AQCM results for the 14 C+ 14 C structure in 28 Mg are compared with the ones of cranked relativistic mean field (CRMF) calculations. Although theoretical frameworks of these two models are quite different, they give similar results for the nucleonic densities and rotational properties of the structure under investigation. The existence of a linear chain three- 14 C cluster structure in 42 Ar has also been predicted in AQCM. Furthermore, these results confirm the role of the 14 C cluster as a possible building block of cluster structures in medium-mass nuclei.

20 ≤ A ≤ 38↗
DOE OSTI2025

Extreme shape coexistence observed in 70 Co

The shape of the atomic nucleus is a property that underpins our understanding of nuclear systems, impacts the limits of nuclear existence, and enables probes of physics beyond the Standard Model. Nuclei can adopt a variety of shapes, including spheres, axially deformed spheroids, and pear shapes. In some regions of the nuclear chart where a spherical nucleus would naively be expected, deformed nuclear states can result from the collective action of constituent protons and neutrons. In a small subset of nuclei both spherical and deformed nuclear states have been experimentally observed, a phenomenon termed shape coexistence. We present spectroscopic evidence for the coexistence of J π = 1 + spherical and deformed states in 70 Co, separated by less than 275 keV. This close degeneracy of levels with the same J π and different shapes demonstrates an extreme example of shape coexistence resulting from the interplay of independent particle motion and collective behavior in highly unstable nuclear systems and identifies the Co isotopes as a transition point between deformed ground states observed in the Cr isotopes and spherical configurations observed in the closed-shell Ni isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Impact of tensor forces on quasifission product yield distributions

Quantum shell effects are crucial for the stability and structure of atomic nuclei and play a key role in the discovery of superheavy elements. Furthermore, during nuclear collisions, the dynamical evolution of these shell effects disrupts the equilibration process necessary for forming a compound nucleus, leading to the breakup of the initial composite as a result of quasifission. As such, quasifission reactions hinder the formation of a superheavy element.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗