Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “noaa”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Radiometric Scaling of the MODIS and VIIRS Imagers to a Common Reference and Stability Analysis for the Next Edition of CERES Products

The NASA CERES project has provided the climate quality observed TOA and computed surface fluxes to the scientific community. CERES uses MODIS and VIIRS imagers to retrieve cloud properties needed to convert Terra, Aqua, NPP, and NOAA-20 CERES footprint radiance observations into fluxes. The imagers are also used to radiometrically scale the geostationary sensors (GEO) radiances to the imager calibration reference to ensure that the GEO derived cloud properties and broadband TOA fluxes are consistent in both space and time. Both the imager and GEO retrieved cloud properties are used to compute the surface fluxes. The CERES imager and GEO calibration team uses ray-matched radiance pairs to radiometrically scale the SNPP and NOAA-20 VIIRS sensors to the Aqua-MODIS calibration reference. The radiometric scaling is further validated using geostationary imagers as transfer radiometers. The team will rely primarily on deep convective clouds to monitor the imager channel calibration stability and to correct for short term calibration drifts. The DSCOVR satellite was launched on February 25, 2015 and orbits around the L1 Lagrange point directly between the Earth and the sun. The EPIC sensor contains no onboard calibration systems. However, multiple inter-calibration studies have shown that the EPIC imager is very stable in time. The excellent radiometric stability of EPIC allows the use of EPIC observations as a stable reference to validate both the short term drift corrections of the imagers, as well as to validate the radiometric scaling factors between them. Examples of the imager relative calibration using EPIC before and after radiometric scaling will be shown along with the results from the use of invariant targets to remove imager calibration drifts.

DSCOVR-EPIC↗
NASA NTRS2020

Monitoring VIIRS Thermal Emissive Bands Long-Term Performance Using Lunar Observations

Two Visible Infrared Imaging Radiometer Suite (VIIRS) instruments are currently operating in space, one onboard the Suomi National Polar-orbiting Partnership (S-NPP) satellite launched on October 28, 2011 and the other onboard the NOAA-20 satellite launched on November 18, 2017. The performance of the seven VIIRS thermal emissive bands (TEBs) is monitored via on-orbit calibration data, the analysis of Earth view observations, as well as inter-comparisons with other sensors. The Moon has been used as a unique invariant target for on-orbit sensor calibration because its surface property is considered extremely stable over time in spectra, radiometry, and geometry with a repeatable lunar phase. This paper presents the assessments of the S-NPP and NOAA-20 VIIRS TEB on-orbit calibration stability using near-monthly scheduled lunar observations over their respective missions. The methodology previously developed for MODIS is now applied to VIIRS to monitor the TEB long-term stability by extracting and trending the lunar brightness temperatures from selected unsaturated pixels. It includes a correction applied to reduce any impact from the Sun–Moon geometry (e.g. Sun-Moon distance variation). The results show that the mission-long brightness temperature trends from the lunar surface are stable for all VIIRS TEBs, despite noticeable seasonal variations in the lunar thermal emissive radiance.

VIIRS↗
NASA NTRS2021

Developing a strategy for the national coordinated soil moisture monitoring network

Soil moisture is a critical land surface variable, affecting a wide variety of climatological, agricultural, and hydrological processes. Determining the current soil moisture status is possible via a variety of methods, including in situ monitoring, remote sensing, and numerical modeling. Although all of these approaches are rapidly evolving, there is no cohesive strategy or framework to integrate these diverse information sources to develop and disseminate coordinated national soil moisture products that will improve our ability to understand climate variability. The National Coordinated Soil Moisture Monitoring Network initiative has developed a national strategy for network coordination with NOAA's National Integrated Drought Information System. The strategy is currently in review within NOAA, and work is underway to implement the initial milestones of the strategy. This update reviews the goals and steps being taken to establish this national-scale coordination for soil moisture monitoring in the United States.

Michael H. Cosh↗
NASA NTRSDate not supplied

Mitigating the Impact of Momentum Unloads on Station Keeping Around Libration Point Orbits

The Space Weather Follow On (SWFO) observatory will observe the Sun from L1, collecting solar wind data and coronal imagery, while providing early warning for space weather events. SWFO is a ride-share mission on SpaceX Falcon9 that is carrying IMAP. The spacecraft will be operated by NOAA and is expected to launch in February 2025. In order to meet NOAA’s operational requirements SWFO must maintain a Sun-Earth-Vehicle (SEV) angle between 4 and 13 degrees for at least 5 years. This constraint drives the size of the Lissajous orbit. SWFO is required keep a Sun pointing attitude in order to perform the Sun observations. Frequent Momentum Unloads are required to desaturate its reaction wheals. Station-keeping maneuvers are required to stay in orbit around L1, they are planned to be performed every 30 days.

Libration Point Orbits↗
NASA NTRSDate not supplied

Toward Consistent Long-term Records of Cloud Fraction from MODIS and VIIRS for CERES

In order to produce a long-term and stable climate record of Earth’s energy budget for NASA’s Clouds and Earth’s Radiant Energy System (CERES) project, a consistent cloud fraction record across different measurement platforms­­ is a crucial first step. As Aqua satellite is approaching the end of its operational lifetime, NOAA-20 VIIRS observations on the JPSS-2 spacecraft will be used for cloud detection to continue the long-term Earth energy budget record. Two steps are designed to achieve this goal. The first step is a quick approach that revises the CERES NOAA-20 VIIRS Edition 1 A (CV Ed1A) cloud mask to incorporate Cross-track Infrared Sounder (CrIS) water vapor and CO_2 channels into the VIIRS cloud mask (CV Ed1B) to produce a consistent cloud fraction with CERES MODIS Edition 4 (CM Ed4) to avoid potential discontinuity when Aqua orbit drifts beyond tolerance before the next Edition is completed. The second step is to develop, as part of CERES next edition (Ed5), a unified MODIS and VIIRS cloud mask using common channels to produce consistent cloud products with improved radiative transfer models, refined clear sky predictions, new GMAO reanalysis products, and the latest radiance collections of MODIS and VIIRS data. This poster will present cloud fraction comparison between CV Ed1B and CM Ed4, as well as the preliminary results of ongoing Ed5 including pixel level cloud mask results, monthly global cloud fraction differences between MODIS and VIIRS (consistency), and initial validation using CALIPSO data (accuracy).

CERES↗
NASA NTRSDate not supplied

Connecting Federal Agencies to Satellite Earth Observations: NASA’s Satellite Needs Working Group Assessment Process

The Satellite Needs Working Group (SNWG), part of the U.S. Group on Earth Observations (USGEO), surveys agencies across the U.S. Government to identify the satellite Earth observations each agency needs to fulfill its high-priority objectives and responsibilities. Around 20 civilian agencies participate in the SNWG survey every two years. After receiving the surveys, the National Aeronautics and Space Administration (NASA) conducts an in-depth evaluation of each agency's needs in collaboration with fellow satellite Earth data providers, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS). This assessment process, which takes place over an eight-month period, is divided into distinct phases. NASA first assembles an assessment team with the necessary subject matter expertise to evaluate each submitted need. An in-depth interview with each submitting agency then follows, featuring discussion of current and upcoming satellite missions as well as potential new activities that NASA, NOAA, and/or USGS could undertake to meet the agency's needs. The assessment teams then further evaluate these potential activities or solutions to identify how many agencies would benefit and estimate how much their level of satisfaction would increase. Solutions expected to have broad-reaching and significant agency benefits are proposed by NASA for funding. SNWG agencies receive an assessment report for each submitted need, in which the tri-agency assessment teams provide a detailed evaluation of the agency need, information on relevant satellite missions, and links to specific datasets or training resources. The SNWG Management Office at NASA’s Interagency Implementation and Advanced Concepts Team (IMPACT) contributes to NASA’s SNWG assessment in a variety of capacities, including statistical analysis of the survey responses to identify trends and similar needs across multiple agencies. The Management Office also provides analytics for the new proposed solutions, demonstrating and quantifying their potential value. For activities that receive funding, the Management Office manages the implementation process and works to maximize the benefit to SNWG agencies via a Stakeholder Engagement Program.

Katrina Virts↗
NASA NTRS2022

SNPP and N20 VIIRS Thermal Emissive Bands Calibration Comparison Using the GEO-LEO Double Difference Method

The VIIRS instruments onboard the SNPP and NOAA-20 satellites have identical spatial resolutions and the same spectral bands. Similar prelaunch tests and identical on-orbit calibration algorithms established the foundation for their consistent Earth measurements. Calibration assessment and consistency comparisons are useful to maintain their performance and measurement accuracy. Simultaneous nadir overpasses (SNO) between two satellites are commonly used for a direct calibration comparison between sensors. However, there are no SNO between SNPP and NOAA20. Hence, a reference sensor or Earth measurements are normally used to bridge the comparison. As a reference, we focus on the Advanced Baseline Imager (ABI) onboard the GOES-R series spacecraft and its application to the SNPP and NOAA-20 VIIRS comparison. GOES16 and GOES17are the first two satellites of the GOES-R series and were launched on November 19, 2016, and March 12, 2018, respectively. Their operational positions are on the equator with longitudes of 75.2° West over land and 137.2° West over ocean, respectively. The ABI is the primary imaging instrument of these spacecrafts for the Earth’s weather, oceans, and environment, with observations (every 10 minutes) that provide vast data for GEO-Low Earth orbit (LEO)and LEO-LEO comparisons utilizing it as an intermediate reference sensor. VIIRS and ABI have spectrally matched bands and can have simultaneous measurements over any selected site every day. The simultaneous measurements over the same site also have various scan angles. These features provide advantages for a VIIRS-to-ABI comparison. The spectral response function difference between instruments, sites selected, and view angles will have effects on the instrument measurements. Their impacts on the calibration comparison, including the use of double differences, will be discussed. By collecting VIIRS measurements over a large range of view angles, the view angle effect will also be investigated. The collection of an ample amount of data provides an advantage for statistical analyses and potential big data applications to sensor calibration assessments. This method can also be applied to other sensor calibration comparison and performance assessments, such as GOES16 and GOES17 ABI, and Terra and Aqua MODIS.

Tiejun Chang↗
NASA NTRS2023

Integrating NASA Aqua AIRS in a Real-Time NUCAPS Science-to-Applications System to Support Severe Weather Forecasting

In recent years, National Oceanic and Atmospheric Administration (NOAA) Unique Combined Atmospheric Processing System (NUCAPS) hyperspectral infrared satellite sounding retrievals derived from Joint Polar Satellite System (JPSS) polar-orbiting satellites have been documented as observations that add value to weather forecasting applications. NUCAPS is currently the operational algorithm delivering JPSS satellite sounding retrievals to the NOAA National Weather Service (NWS) and is based on the heritage Atmospheric Infrared Sounder (AIRS) Science Team algorithm for processing vertical temperature, moisture, and trace gas retrievals. For the Special Collection on “Twenty Years of Observations from AIRS,” we highlight the methodology we implemented to develop a prototype science-to-applications system to enable real-time processing of AIRS satellite sounding retrievals through the NUCAPS algorithm (i.e., NUCAPS-Aqua) to support weather forecasting applications. The addition of NUCAPS-Aqua to experimental real-time pathways alongside operational JPSS NUCAPS soundings, facilitated assessment of NUCAPS-Aqua at the 2022 Hazardous Weather Testbed (HWT) Spring Experiment. Development of NUCAPS-Aqua described in this technical report includes preservation of microwave observations and calculation of a-priori regression coefficients. Additionally, the real-time processing and challenges with implementing a science-to-applications system are discussed. Two illustrative pre-convective forecasting examples analyzed by NWS forecasters during the 2022 HWT Spring Experiment are highlighted to demonstrate the benefit of NUCAPS-Aqua as (a) special afternoon soundings, (b) an additional observation to assess temporal trends using multiple satellites, and (c) a complement to observational and model analysis.

remote sensing↗
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for HighIntensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
NASA NTRS2023

A Nowcasting Approach for Low Earth Orbit Hyperspectral Infrared Soundings Within the Convective Environment

Low Earth orbit (LEO) hyper-spectral infrared (IR) sounders have significant yet untapped potential for characterizing thermodynamic environments of convective initiation and ongoing convection. While LEO soundings are of value to weather forecasters, the temporal resolution needed to resolve the rapidly evolving thermodynamics of the convective environment is limited. We have developed a novel nowcasting methodology to extend snapshots of LEO soundings forward in time up to six hours to create a product available within National Weather Service systems for user assessment. Our methodology is based on parcel forward-trajectory calculations from the satellite observing time to generate future soundings of temperature (T) and specific humidity (q) at regularly gridded intervals in space and time. The soundings are based on NOAA-Unique Combined Atmospheric Processing System (NUCAPS) retrievals from the Suomi NPP and NOAA-20 satellite platforms. The tendencies of derived convective available potential energy (CAPE) and convective inhibition (CIN) are evaluated against gridded, hourly accumulated rainfall obtained from the Multi-Radar Multi-Sensor (MRMS) observations for 24 hand-selected cases over the Contiguous United States. Areas with forecast increases in CAPE (reduced CIN) are shown to be associated with areas of precipitation. The increases in CAPE and decreases in CIN are largest for areas that have the heaviest precipitation and are statistically significant compared to areas without precipitation. These results imply that adiabatic parcel advection of LEO satellite sounding snapshots forward in time are capable of identifying convective initiation over an expanded temporal scale compared to soundings used only during the LEO satellite overpass time.

North America↗
NASA NTRS2023

Is the Global MHD Modeling of the Magnetosphere Adequate for GIC Prediction: the May 27–28, 2017 Storm

Practical steps taken by the international community to reduce the damage to technological systems from space weather include the development of numerical models capable of real-time predictions of electromagnetic disturbances at the Earth’s surface. Here we examine the feasibility of a version of the Space Weather Modeling Framework (SWMF) global MHD simulation code similar to that used by the NOAA Space Weather Prediction Center to predict the level of geomagnetic field variability, and consequently geomagnetically induced currents (GICs). We consider the contribution of geomagnetic disturbances to the bursts of GIC in the electric power line of the Kola Peninsula during the May 27–28, 2017 storm and compare the observations with results of the global MHD model. During the maximal disturbance magnetic field variations at East Scandinavian stations become more irregular, as intense Pi3 pulsations are superposed on the magnetic bay. These pulsations are not quasi-sinusoidal waves like typical Pc5 pulsations, but they are rather a quasi-periodic sequence of magnetic impulses with time scales ~5–15 min. During this period with elevated Pi3 activity very high values of GIC were recorded (variations >100 A) in the electric power transmission line. The SWMF modeling reasonably well reproduces the global magnetospheric parameters, such as SYM-H index or cross-polar potential. However, the magnetic field variability dB/dt in the East Scandinavia predicted by the modeling has turned out to be more than order of magnitude less than that observed. Thus, the version of SWMF with the grid used by NOAA SWPC still cannot adequately predict for the May 27–28 event the fine structure of the storm/substorm—Pi3 geomagnetic disturbances, and consequently the magnitude of the GIC that they drive.

geomagnetically induced currents↗
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for High Intensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
NASA NTRSDate not supplied

Simulations of X-59 Sonic Thumps and Traditional Sonic Booms Propagated Around the World for Three Atmospheric Models

Propagation simulations of sonic booms from supersonic aircraft through atmospheric data over time at fixed locations provides the opportunity to assess noise exposure statistics for different climate regions. Knowledge of climate-based differences in sonic boom noise exposure statistics is important to ensure that future civil supersonic aircraft noise certification standards are globally applicable and effective. In this presentation, simulated sonic booms from the NASA X-59 Quesst quiet supersonic aircraft and conventional supersonic aircraft were propagated through atmospheric data at 100 locations across the world using PCBoom. Noise exposure statistics are compared for propagation results from three different atmospheric databases (NOAA Global Forecast System, NOAA Climate Forecast System Version 2, and the ECMWF Reanalysis Version 5). These atmospheric models were chosen due to their global coverage, popularity, and database availability. Preliminary statistical models are fit to assess the impact of several factors including flight direction, season, ground elevation, and climate on noise exposure size and loudness. Areas with prevalence of higher noise due to their climate are identified, which could help inform future supersonic aircraft noise standards.

X-59↗
NASA NTRSDate not supplied

Seasonal Surface Spectral Emissivity Derived From MODIS Data

Surface emissivity is essential for many remote-sensing applications including the retrieval of surface skin temperature from satellite-based infrared measurements, the determination of cloud detection thresholds, and the estimation of the surface longwave radiation emission, an important component of the energy budget of the surface-atmosphere interface. The CERES (Clouds and the Earth’s Radiant Energy System) Project is measuring broadband shortwave and longwave radiances and deriving cloud properties from the MODIS on Terra and Aqua and from the VIIRS on NOAA-19 and NOAA-20 orbiters to produce combined global radiation and cloud property data sets. Zhou et al. (IEEE Trans. Geosci. Remote Sens., 49, 2011) used Infrared Atmospheric Sounding Interferometer (IASI) data to create a high spectral resolution surface emissivity atlas for remote sensing and modeling applications. The IASI measures spectral radiances between 3.62 and 15.5 μm. The VIIRS I4 channel width is from 3.55 to 3.93 μm, while MODIS Band 20 is from 3.66 to 3.84 m. Comparisons of top-of-atmosphere (TOA) radiance calculations with MODIS and VIIRS observations for these bands relative to bands in the mid-infrared suggest that the IASI emissivity atlas near 3.7 µm may not be suitable for CERES cloud retrievals. In this paper, the IASI emissivities for the VIIRS and MODIS bands centered near 11m are used to derive surface skin temperature from nighttime MODIS/VIIRS data. The Goddard Earth Observing System for Instrument Teams (GEOS-IT) numerical weather analyses provide temperature and water vapor profiles fused to correct the observed radiances for atmospheric absorption and emission. Global seasonal emissivity maps are then derived for the VIIRS and MODIS 3.7-m bands that are consistent with the derived skin temperatures and the observed TOA radiances. These seasonal climatology maps are validated and will be used in CERES Edition 5 and other CERES-related cloud retrieval algorithms to provide improved clear-sky radiances and derived cloud properties.

Surface Emissivity↗
NASA NTRSDate not supplied

A HIRF-Map Certification Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in airspace similar to Transport Category Rotorcraft, requiring them to meet stringent requirements for High-Intensity Radiated Fields (HIRF) certification. The environment is notably severe, particularly compared to fixed-wing aircraft, due to operations at lower altitudes. This potentially exposes the vehicles to high-power transmitters on the ground, leading to significant challenges. High-level HIRF exposure can result in avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF pose significant barriers concerning size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel HIRF protection approach, aiming to reduce costs by certifying vehicles to a "vehicle tolerance level" lower than that required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources. This distance is calculated based on the vehicle's tolerance level and transmitter characteristics, such as transmit power, antenna beamwidth, and direction. Tailored flight maps are developed to identify transmitters and avoidance zones within an operating area or along a flight path, enabling restricted vehicle operations. Vehicles with higher tolerance levels could have smaller HIRF avoidance zones, allowing them to operate closer to transmitters. Transmitter data are sourced from government databases, such as those of the Federal Communications Commission (FCC) and the National Oceanic and Atmospheric Administration (NOAA). A map tool is developed using Matlab to calculate and visualize HIRF avoidance zones based on available databases. The tool determines stand-off distances based on input vehicle tolerance levels, displaying results on various base maps depicting HIRF-restricted areas. Illustrations cover various FCC transmitters, including AM/FM/TV transmitters, satellite earth stations, and NOAA weather radars. The HIRF zones of smaller transmitters, such as land-mobile radios, pagers, microwave links, and cellular towers, are also illustrated. An example of flight planning around transmitters is provided. For now, airports and government-owned lands are excluded due to limited access to sensitive transmitter data. Despite this approach, a minimum HIRF tolerance level for vehicles may still be necessary to cover mobile devices, cellular base stations, transmitters on other AAM vehicles, and other small power devices not included in the FCC databases. The paper discusses findings and areas for improving existing databases and suggests an approach for better access to sanitized data in more restricted government databases. This method significantly deviates from the standard approach and introduces slightly higher flight-planning complexity. However, the potential cost savings are considerable. Future AAM/UAM/UAS aeronautical charts could potentially incorporate these new HIRF avoidance zones. Keywords—HIRF; Map; AAM; UAM; UAS; Advanced Air Mobility; Urban Air Mobility; Unmanned Aerial Systems; Certification.

HIRF↗
NASA NTRSDate not supplied

Analyzing Federal Agency Earth Observation Needs: NASA’s 2022 Satellite Needs Working Group Assessment

Every two years, the National Aeronautics and Space Administration (NASA) leads an assessment of Federal civilian agency Earth observation needs submitted through the Satellite Needs Working Group (SNWG) survey. Nearly 30 agencies participated in the 2022 SNWG survey, submitting 115 high-priority satellite data needs that span Earth Science and represent a wide variety of potential applications for Earth observation data. Analysis of multiple SNWG survey cycles reveals trends in agency needs toward more frequent, higher resolution data that can inform agency decision-making. NASA and partners at the National Oceanic and Atmospheric Administration (NOAA) and U.S. Geological Survey (USGS) evaluated the agency surveys during an eight-month assessment period. Assessment teams comprised of subject matter experts, technology specialists, and agency managers conducted an in-depth interview with each submitting agency to fully understand the need and discuss relevant current and upcoming satellite missions. The teams then proposed over 100 potential solutions, or new activities that NASA, NOAA, and/or USGS could undertake to help meet agency needs. A few cross-cutting potential solutions that are projected to be most valuable to SNWG agencies are under consideration for implementation by NASA in the coming years.

Katrina Virts↗
NASA NTRS2023

Using Dome Concordia to Characterize the Long-Term Stability of VIIRS Thermal Emissive Bands

The Visible Infrared Imaging Radiometer Suite (VIIRS) instruments aboard the Suomi NPP and NOAA-20 spacecraft have successfully provided Earth image products since 2011 and 2017, respectively. Maintaining accurate radiometric calibration and calibration consistency between the two sensors is a necessity for the continued quality of long-term data records. In this work, the use of frequent VIIRS measurements of brightness temperature over the area surrounding Dome Concordia (Dome C), Antarctica (75.1 °S, 123.4°E) to track the long-term stability of its thermal emissive bands (TEB) is presented. The extremely dry, cold, and rarefied atmosphere of the site makes it ideal to track and detect long-term changes in the TEB responses via analysis of near-nadir and off-nadir VIIRS overpasses in reference to the surface temperature measurements provided by an automated weather station (AWS). Multi-year Dome C measurements have been used to assess the stability of the VIIRS response-versus-scan-angle (RVS) of the half-angle-mirror (HAM), derived from prelaunch characterization, and detector differences at multiple scan angles. Also, included in this work is the RVS stability assessments using the Dome C overpasses. The methodology developed via this work will also be applied to the recently launched VIIRS instrument onboard the NOAA-21 satellite (previously JPSS-2) in the future.

Amit Angal↗
NASA NTRS2024

Increased Atmospheric PM 2.5 Events Due to Open Waste Burning in Qaanaaq, Greenland, Summer of 2022

High levels of particulate matter (PM) are relevant to severe air pollution and can adversely impact human health. Maintaining healthy air quality for the residents of the Arctic region is essential to satisfy the no-one-left-behind policy of the Sustainable Development Goals (SDGs) by the United Nations. In this study, we installed a PM 2.5 measurement system in Qaanaaq, Greenland, and obtained the first continuous PM 2.5 measurements from 20 July to 13 August, 2022. We observed several increased PM2.5 events; relatively high PM 2.5 levels persisted from 8 August 2022. On the same day, visible black smoke emitted from the Qaanaaq dump site originated from open waste burning. By confirming less transboundary air pollution contributions from remote aerosol source regions to Qaanaaq during the measurement period using NOAA’s HYSPLIT backward trajectory analysis and NASA’s MERRA-2 aerosol re-analysis, we confirmed that the increased PM 2.5 was primarily due to local open waste burning with less contributions from transboundary air pollution. However, small contributions from biomass burning outside Greenland were plausible during the early measurement period. Additionally, NOAA’s HYSPLIT dispersion calculations suggested possible aerosol depositions from local open waste burning to nearby sea areas, such as Baffin Bay. Although the hourly mean PM 2.5 mass concentration was not alarmingly high during the measurement period, future studies should incorporate longer-term continuous PM 2.5 measurements along with other atmospheric chemical analyses to identify possible local air pollution sources in detail to ensure clean ambient air for the future in the Arctic. Our study provides quantitative evidence of the impact of open waste burning on air quality at a study site in Greenland, which could be crucial in developing air quality policies for this region in the Arctic.

aerosols↗