Enhancing Long;#8208;Term Thermal Stability of Non;#8208;Fullerene Organic Solar Cells Using Self;#8
Explore the source record for details and available documents.
Su, Li‐Yun↗
SEARCH · Engineering Papers
Results for “nanoparticle control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Theoretical Investigation of the Adsorbate and Potential–Induced Stability of Cu Facets During Electrochemical CO 2 and CO Reduction
The activity and product selectivity of electrocatalysts for reactions like the carbon dioxide reduction reaction (CO 2 RR) are intimately dependent on the catalyst's structure and composition. While engineering catalytic surfaces can improve performance, discovering the key sets of rational design principles remains challenging due to limitations in modeling catalyst stability under operating conditions. Herein, we perform first-principles density functional calculations adopting implicit solvation methods with potential control to study the influence of adsorbates and applied potential on the stability of different facets of model Cu electrocatalysts. Using coverage dependencies extracted from microkinetic models, we describe an approach for calculating potential and adsorbate-dependent contributions to surface energies under reaction conditions, where Wulff constructions are used to understand the morphological evolution of Cu electrocatalysts under CO 2 RR conditions. Here we identify that CO*, a key reaction intermediate, exhibits higher kinetically and thermodynamically accessible coverages on (100) relative to (111) facets, which can translate into an increased relative stabilization of the (100) facet during CO 2 RR. Our results support the known tendency for increased (111) faceting of Cu nanoparticles under more reducing conditions and that the relative increase in (100) faceting observed under CO 2 RR conditions is likely attributed to differences in CO* coverage between these facets.
30 DIRECT ENERGY CONVERSION↗
Two-Photon Flow Cytometry
Flow cytometry is a powerful technique for obtaining quantitative information from fluorescence in cells. Quantitation is achieved by assuring a high degree of uniformity in the optical excitation and detection, generally by using a highly controlled flow such as is obtained via hydrodynamic focusing. In this work, we demonstrate a two-beam, two- channel detection and two-photon excitation flow cytometry (T(sup 3)FC) system that enables multi-dye analysis to be performed very simply, with greatly relaxed requirements on the fluid flow. Two-photon excitation using a femtosecond near-infrared (NIR) laser has the advantages that it enables simultaneous excitation of multiple dyes and achieves very high signal-to-noise ratio through simplified filtering and fluorescence background reduction. By matching the excitation volume to the size of a cell, single-cell detection is ensured. Labeling of cells by targeted nanoparticles with multiple fluorophores enables normalization of the fluorescence signal and thus ratiometric measurements under nonuniform excitation. Quantitative size measurements can also be done even under conditions of nonuniform flow via a two-beam layout. This innovative detection scheme not only considerably simplifies the fluid flow system and the excitation and collection optics, it opens the way to quantitative cytometry in simple and compact microfluidics systems, or in vivo. Real-time detection of fluorescent microbeads in the vasculature of mouse ear demonstrates the ability to do flow cytometry in vivo. The conditions required to perform quantitative in vivo cytometry on labeled cells will be presented.
Zhog, Cheng Frank↗
Nonmonotonic Strain Rate Dependence on the Strain Hardening of Polymer Nanocomposites
This Letter investigates the external deformation on modifying the polymer–nanoparticle (NP) and NP–NP interactions as well as their influences on the macroscopic properties of polymer nanocomposites (PNCs). Specifically, the applied uniaxial extension brings together the NPs along the transverse stretching direction and catalyzes the percolation transition from the initially well-dispersed NPs in the PNCs. The percolated NP network thus increases the strength of PNCs and leads to a strong surge in the elongation viscosity at very low strain rates, exhibiting the unexpected nonmonotonic strain rate dependence on the strain hardening. These results reveal explicitly the unconventional roles of the external deformation on modulating the relative strength of the polymer–NP and the NP–NP interactions, enabling advanced structures and properties control of PNCs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Spin Emitters beyond the Point Dipole Approximation in Nanomagnonic Cavities
Control over transition rates between spin states of emitters is crucial in a wide variety of fields ranging from quantum information science to the nanochemistry of free radicals. We present an approach to drive both electric and magnetic dipole-forbidden transitions of a spin emitter by placing it in a nanomagnonic cavity, requiring a description of both the spin emitter beyond the point dipole approximation and the vacuum magnetic fields of the nanomagnonic cavity with a large spatial gradient over the volume of the spin emitter. We specifically study the silicon vacancy (SiV – ) defect in diamond, whose Zeemansplit ground states comprise a logical qubit for solid-state quantum information processing, coupled to a magnetic nanoparticle serving as a model nanomagnonic cavity capable of concentrating microwave magnetic fields into deeply subwavelength volumes. Through first-principles modeling of the SiV – spin orbitals, we calculate the spin transition densities of magnetic dipole-allowed and -forbidden transitions and calculate their coupling rates to various multipolar modes of the nanomagnonic cavity. We envision using such a framework for manipulation of quantum spin states.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Electrochemical Behavior of Copper Ion Complexed with Nanoparticle Organic Hybrid Materials
Nanoscale Organic Hybrid Materials (NOHMs) have unique properties that show potential for their use as novel electrolytes that can interact with redox active species. In this work, we probe the effects of adding poly(ethyleneimine)-based NOHMs (NOHM-I-PEI) on copper ion electrochemical reactions. As NOHM-I-PEI is added to a solution containing Cu(II), the voltammetric peak current decreases. This is likely caused by strong complex formation between the PEI nitrogen and the copper, similar to complexation observed in solutions of the polymer with copper. Upon copper addition to a NOHM-I-PEI solution, the pH decreases from 10.1, plateauing at pH = 5.3 at ~3:1 N:Cu ratio indicating that Cu(II) displaces protons. The UV–visible spectra exhibit a Cu-PEI peak, the intensity of which levels off at ~2.8 N:Cu. Acid titration of the N-moieties of the PEI reveals three inflections corresponding to N-environments in the PEI. Upon controlling the pH of the solution by buffering, the "sequestration" of Cu(II) is found to occur when there are unprotonated nitrogens present in the NOHM-I-PEI system; this phenomenon is also supported by UV-vis results. Furthermore, this work highlights the potential of and the design of NOHMs to carry charged electroactive species in solutions along with key factors to control for optimal function.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Patchy nanoparticles by atomic stencilling
Stencilling, in which patterns are created by painting over masks, has ubiquitous applications in art, architecture and manufacturing. Modern, top-down microfabrication methods have succeeded in reducing mask sizes to under 10 nm, enabling ever smaller microdevices as today’s fastest computer chips. Meanwhile, bottom-up masking using chemical bonds or physical interactions has remained largely unexplored, despite its advantages of low cost, solution-processability, scalability and high compatibility with complex, curved and three-dimensional (3D) surfaces. Here we report atomic stencilling to make patchy nanoparticles (NPs), using surface-adsorbed iodide submonolayers to create the mask and ligand-mediated grafted polymers onto unmasked regions as ‘paint’. We use this approach to synthesize more than 20 different types of NP coated with polymer patches in high yield. Polymer scaling theory and molecular dynamics (MD) simulation show that stencilling, along with the interplay of enthalpic and entropic effects of polymers, generates patchy particle morphologies not reported previously. These polymer-patched NPs self-assemble into extended crystals owing to highly uniform patches, including different non-closely packed superlattices. We propose that atomic stencilling opens new avenues in patterning NPs and other substrates at the nanometre length scale, leading to precise control of their chemistry, reactivity and interactions for a wide range of applications, such as targeted delivery, catalysis, microelectronics, integrated metamaterials and tissue engineering.
36 MATERIALS SCIENCE↗
Size and Structural Control of Mechanoluminescent ZnS:Mn 2+ Nanocrystals for Optogenetic Neuromodulation
Mechanoluminescent materials hold immense potential for various transformative applications, from medical imaging and diagnostics to health monitoring and wearable displays. Conventionally produced as bulk powders or microparticles, they face significant size limitations for advanced applications, particularly in biological systems and microscale devices. Here, this work presents an approach to ZnS:Mn 2+ nanocrystal synthesis that involves self-assembly and subsequent calcination. In addition to effective size control within the nanoscale, this approach promotes the formation of abundant stacking faults, significantly enhancing piezoelectric and mechanoluminescent properties by increasing trap density and reducing trap depth. Unlike mechanoluminescent materials produced using conventional methods, these nanocrystals demonstrate strong mechanoluminescence without requiring UV pre-excitation, and the light emission persists even after mechanical stress is removed. These advantageous properties make them promising candidates for optogenetic neuromodulation, as they can effectively trigger electrical signals in neurons upon ultrasound stimulation both with and without UV pre-excitation. The persistent mechanoluminescence prolongs the duration of neuronal electrical activity, providing an extended temporal window for neuromodulation compared to conventional mechanoluminescent materials. This study provides a scalable method for producing efficient mechanoluminescent nanoparticles and reveals the crucial role of particle size and defect structures in determining their mechanoluminescent behavior.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Coupling-dependent antiferromagnetic-ferromagnetic ordering in a pinwheel artificial spin ice
Nanopatterned magnetic thin films offer a platform for exploration of tailored magnetic properties such as emergent long-range order. A prominent example is artificial spin ice (ASI), where an arrangement of nanoscale magnetic elements, acting as macrospins, interact via their dipolar fields. In this study, we discuss the transition from antiferromagnetic (AFM) to ferromagnetic (FM) long-range order in a square lattice ASI as the magnetic elements are gradually rotated through 45° to a “pinwheel” configuration. The AFM-FM transition is observed experimentally using synchrotron radiation x-ray spectromicroscopy and occurs for a certain rotation angle of the nanomagnets, dependent on the dipolar coupling strength determined by the separation of the magnets in the lattice. Large-scale magnetic dipole simulations show that the point-dipole approximation fails to capture the correct AFM-FM transition angle. However, excellent agreement with experimental data is obtained using a dumbbell-dipole model, which better reflects the actual dipolar fields of the magnets. This model also explains the coupling dependence of the transition angle, another feature not captured by the point-dipole model. Our findings resolve a discrepancy between measurement and theory in previous work on “pinwheel” ASIs and establish the coupling dependence of the AFM-FM transition. The revised dipole model, with a more accurate representation of the stray field, offers more precise control of magnetic order in artificial spin systems.
Artificial spin ice↗
Plasmon excitations in chemically heterogeneous nanoarrays
The capability of collective excitations, such as localized surface plasmon resonances, to produce a versatile spectrum of optical phenomena is governed by the interactions within the collective and single-particle responses in the finite system. In many practical instances, plasmonic metallic nanoparticles and arrays are either topologically or chemically heterogeneous, which affects both the constituent transitions and their interactions. Here, the formation of collective excitations in weakly Cu- and Pd-doped Au nanoarrays is described using time-dependent density functional theory. The additional impurity-induced modes in the optical response can be thought to result from intricate interactions between separated excitations or transitions. In this work, we investigate the heterogeneity at the impurity level, the symmetry aspects related to the impurity position, and the influence of the impurity position on the confinement phenomena. The chemically rich and symmetry-dependent quantum mechanical effects are analyzed with transition contribution maps demonstrating the possibility to develop nanostructures with more controlled collective properties.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Extrapolating Contaminant Effects from Individuals to Populations: A Case Study on Nanoparticle Toxicity to Daphnia Fed Environmentally Relevant Food Levels
Ecological risk assessment (ERA) is charged with assessing the likelihood a chemical will have adverse environmental or ecological effects. When assessing the risk of a potential contaminant to biological organisms, ecologists are most concerned with the sustainability of populations of organisms, rather than protecting every individual. However, ERA most commonly relies on data on the effect of a potential contaminant on individuals because these experiments are more feasible than costly population-level exposures. In this work, we address the challenge of extrapolating these individual-level results to predict population-level effects. Previous per-capita population growth rate estimates calculated from individual-level exposures of Daphnia pulicaria to silver nanoparticles (AgNPs) at different food rations predict a critical daily food requirement for daphnid populations exposed to 200 μg/L AgNPs to avoid extinction. To test this, we exposed daphnid populations to the same AgNP concentration at three different food inputs, with the lowest ration close to the extinction threshold predicted from data on individuals. The two populations with the higher food inputs persisted, and the population with the lowest food input went extinct after 50 days but did persist through two generations. Further, we demonstrate that we can extrapolate between these levels of biological organization by parameterizing an individual-level biomass model with data on individuals’ response to AgNPs and using these parameters to predict the outcome for control and AgNP-exposed populations. Key to successful extrapolation is careful modeling of temporal changes in resource density, driven by both the experimental protocols and feedback from the consumer. The implication for ecotoxicology is that estimates of extinction thresholds based on studies of individuals may be reliable predictors of population outcomes, but only with careful treatment of resource dynamics.
54 ENVIRONMENTAL SCIENCES↗
Modular Processing of Flare Gas for Carbon Nanoproducts
This project demonstrated the technical viability and economic promise of a modular system for converting flared natural gas into valuable carbon nanoproducts (CNPs) through catalytic chemical vapor deposition (CVD). All major project milestones were successfully completed, including reactor design and commissioning, catalyst development, process optimization, technoeconomic analysis, and application testing in concrete systems. The overarching goal was to create a scalable, field-deployable process that valorizes stranded methane by producing high-value carbon materials for use in cementitious composites. At the lab scale, the team designed and built a fluidized bed reactor optimized for use with silica fume-supported nickel catalysts synthesized via atomic layer deposition (ALD). A statistically designed sintering study enabled precise tuning of nickel nanoparticle size, identifying the influence of oxygen partial pressure, time, and temperature on catalyst morphology and performance. These insights allowed the team to target catalyst conditions that maximize carbon nanofilament growth. Subsequent CVD experiments achieved up to 31.8 wt% carbon deposition under optimized conditions, with TEM confirming the presence of nanofilament structures and sustained hydrogen evolution during reaction. Reactor upgrades and empirical fluidization studies supported the development of reliable, repeatable experimental protocols. The modular pilot-scale skid reactor was fully constructed, instrumented, and commissioned. Capable of operating at 675–800°C and pressures up to 290 psig, the system was designed for continuous operation at a carbon production rate of 1 kg/hr. Initial demonstration runs confirmed solids handling, thermal control, and system leak-tightness, although a critical reactor component (the downfeed tube) was inadvertently omitted during final assembly. This omission limited gas–solid contact and prevented meaningful carbon deposition during pilot-scale CVD runs. Nonetheless, the system operated safely under design conditions, and the root cause of performance limitations was clearly identified. Complementary work on UHPC formulations demonstrated that small additions of carbon nanoproducts, including those derived from flare gas, can significantly enhance mechanical performance while preserving workability. A comprehensive study of CNF dispersion techniques and mix design optimization led to a clear protocol for integrating these nanomaterials into concrete. Incorporation of CNPs improved flexural toughness and reduced porosity, supporting their use in high-performance infrastructure applications. A technoeconomic analysis (TEA) confirmed that this process can produce CNP-loaded catalyst material at a levelized cost below $\$$7/kg across a range of catalyst loadings and reaction yields. With estimated market values for the carbon composite product ranging from $\$$14 to over $\$$60/kg, and the ability to blend CNPs into concrete at sub-percent levels with less than 10% added cost, the system presents a compelling economic case. While additional engineering work is needed to optimize fluidization and heat transfer at scale, this project establishes a strong foundation for commercial development. The process is not only technically sound but also economically promising, representing a viable pathway for flare gas mitigation through modular carbon nanomaterial production.
03 NATURAL GAS↗
Industrial Scalable Additives for Enhanced Decomposition of Plastic Waste Through Photocatalysis
Polymer pollution is a dangerous environmental problem that can lead to the spread of toxic chemicals and microplastics throughout aquatic biomes. Commonly littered plastic from consumer goods and products with a limited or single use can be embedded with photocatalysts to avoid an increase in the amount of plastic present in Earth’s bodies of water. In this work, the photocatalyst nanoparticles, less than 100 nm particle size, were integrated into polyethylene terephthalate, high-density polyethylene, low-density polyethylene, and polystyrene and exposed under ultraviolet light over two independent experimental trials examining both the environmental factors impacting decay and the physical parameters required to implement this solution on a large scale. The plastics were chosen due to their prolific use in items such as grocery bags, bottles, and packaging. The first half of the project examined the effects of water and light frequency on polymer decay, and the second half of the project examined photodecomposition of polymer films. We report that low-density and high-density polyethylene films with titanium dioxide decayed approximately 11.7 and 9.6 faster than control samples, respectively. With an estimated price of less than half the cost of a shopping bag for titanium catalyst integration and a retention of the polymer’s tensile strength with a 2 wt% catalyst concentration, photocatalytic decomposition is a feasible, scalable method for the prevention and future reduction of polymer waste from realistic products littered in the environment.
36 MATERIALS SCIENCE↗
Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology
Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Kinetics of the functionalization of mesoporous silica nanoparticles: Implications on surface group distributions, adsorption and catalysis
The post-synthesis functionalization (grafting) kinetics of mesoporous silica nanoparticles (MSN) with organotrimethoxysilanes (R-TMS) is studied via solution 1 H NMR spectroscopy. The process involves a rapid adsorption/ desorption pre-equilibrium followed by reaction of R-TMS with surface silanols. Grafting rates are affected by the functional group in R-TMS. For example, the grafting rate of aminopropyl-trimethoxysilane (AP-TMS) is one order of magnitude higher than other R-TMS. High concentrations of AP-TMS result in substrate-inhibition kinetics, likely due to steric and mobility constraints for reactant alignment at high coverage. The higher rates of AP-TMS grafting indicate a catalytic effect of amine groups. This effect depends on the amine’s basicity and can be used to control the grafting rates and degree of condensation of other R-TMS. Adjusting the rate of mercaptopropyl-trimethoxysilane (MP-TMS) grafting using amines gives MP-MSN materials of varying adsorptive and catalytic activities, illustrated by Pd scavenging experiments and use of Pd@MP-MSN as catalysts for a Suzuki-Miyaura cross-coupling reaction.
36 MATERIALS SCIENCE↗
Optical Processes behind Plasmonic Applications
Plasmonics is a revolutionary concept in nanophotonics that combines the properties of both photonics and electronics by confining light energy to a nanometer-scale oscillating field of free electrons, known as a surface plasmon. Generation, processing, routing, and amplification of optical signals at the nanoscale hold promise for optical communications, biophotonics, sensing, chemistry, and medical applications. Surface plasmons manifest themselves as confined oscillations, allowing for optical nanoantennas, ultra-compact optical detectors, state-of-the-art sensors, data storage, and energy harvesting designs. Surface plasmons facilitate both resonant characteristics of nanostructures and guiding and controlling light at the nanoscale. Plasmonics and metamaterials enable the advancement of many photonic designs with unparalleled capabilities, including subwavelength waveguides, optical nanoresonators, super- and hyper-lenses, and light concentrators. Alternative plasmonic materials have been developed to be incorporated in the nanostructures for low losses and controlled optical characteristics along with semiconductor-process compatibility. This review describes optical processes behind a range of plasmonic applications. It pays special attention to the topics of field enhancement and collective effects in nanostructures. The advances in these research topics are expected to transform the domain of nanoscale photonics, optical metamaterials, and their various applications.
2D materials↗
MgO Nanostructures on Cu(111): Understanding Size- and Morphology-Dependent CO 2 Binding and Hydrogenation
To design and optimize cost-effective technologies for the capture, utilization, and storage of carbon dioxide (CO 2 ), we need a fundamental knowledge and control of chemical interactions associated with the capture and conversion of the molecule into high-value chemicals, minerals, and all kinds of materials. Bulk magnesium oxide (MgO) is frequently used for the trapping and storage of CO 2 by generation of magnesium carbonates. In this study, the growth and reactivity of MgO nanostructures on a Cu 2 O/Cu(111) substrate were investigated using scanning tunneling microscopy (STM) and synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). For extremely small concentrations of Mg (~ 0.01 monolayer (ML)), a well-ordered film of copper oxide with small clusters (0.2-0.5 nm in width, 0.4-0.6 Å in height) of embedded MgO was seen. At a coverage of 0.1 ML, MgO nanoparticles with a width of 0.4 to 1 nm and a height of ~ 1.5 Å were randomly distributed on the copper oxide. Further, random distribution was also observed when the MgO coverage was raised to 0.25 ML, with the width of the MgO particles increasing to 2-2.5 nm and the height reaching 2 Å. These oxide nanostructures displayed a high reactivity towards CO 2 and H 2 that is not seen for bulk MgO. Dissociation of H 2 was observed at room temperature with reaction of the H adatoms with CuO x and C-containing groups. On the small MgO nanostructures (< 1 nm in width), instead of plain carbonate formation, there was dissociation of CO 2 into CO and C species, opening reaction channels for the conversion of this harmful molecule into oxygenates and light alkanes.
03 NATURAL GAS↗
Anomalous size effect on yield strength enabled by compositional heterogeneity in high-entropy alloy nanoparticles
High-entropy alloys (HEAs), although often presumed to be random solid solutions, have recently been shown to display nanometer-scale variations in the arrangements of their multiple chemical elements. Here, we study the effects of this compositional heterogeneity in HEAs on their mechanical properties using in situ compression testing in the transmission electron microscope (TEM), combined with molecular dynamics simulations. We report an anomalous size effect on the yield strength in HEAs, arising from such compositional heterogeneity. By progressively reducing the sample size, HEAs initially display the classical “smaller-is-stronger” phenomenon, similar to pure metals and conventional alloys. However, as the sample size is decreased below a critical characteristic length (~180 nm), influenced by the size-scale of compositional heterogeneity, a transition from homogeneous deformation to a heterogeneous distribution of planar slip is observed, coupled with an anomalous “smaller-is-weaker” size effect. Atomic-scale computational modeling shows these observations arise due to compositional fluctuations over a few nanometers. These results demonstrate the efficacy of influencing mechanical properties in HEAs through control of local compositional variations at the nanoscale.
36 MATERIALS SCIENCE↗