Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Propagation and Breaking at High Altitudes of Gravity Waves Excited by Tropospheric Forcing

An anelastic approximation is used with a time-variable coordinate transformation to formulate a two-dimensional numerical model that describes the evolution of gravity waves. The model is solved using a semi-Lagrangian method with monotone (nonoscillatory) interpolation of all advected fields. The time-variable transformation is used to generate disturbances at the lower boundary that approximate the effect of a traveling line of thunderstorms (a squall line) or of flow over a broad topographic obstacle. The vertical propagation and breaking of the gravity wave field (under conditions typical of summer solstice) is illustrated for each of these cases. It is shown that the wave field at high altitudes is dominated by a single horizontal wavelength; which is not always related simply to the horizontal dimension of the source. The morphology of wave breaking depends on the horizontal wavelength; for sufficiently short waves, breaking involves roughly one half of the wavelength. In common with other studies, it is found that the breaking waves undergo "self-acceleration," such that the zonal-mean intrinsic frequency remains approximately constant in spite of large changes in the background wind. It is also shown that many of the features obtained in the calculations can be understood in terms of linear wave theory. In particular, linear theory provides insights into the wavelength of the waves that break at high altitudes, the onset and evolution of breaking. the horizontal extent of the breaking region and its position relative to the forcing, and the minimum and maximum altitudes where breaking occurs. Wave breaking ceases at the altitude where the background dissipation rate (which in our model is a proxy for molecular diffusion) becomes greater than the rate of dissipation due to wave breaking, This altitude, in effect, the model turbopause, is shown to depend on a relatively small number of parameters that characterize the waves and the background state.

Prusa, Joseph M.↗

Antarctic Analog for Dilational Bands on Europa

Europa's surface shows signs of extension, which is revealed as lithospheric dilation expressed along ridges, dilational bands and ridged bands. Ridges, the most common tectonic feature on Europa, comprise a central crack flanked by two raised banks a few hundred meters high on each side. Together these three classes may represent a continuum of formation. In Tufts' Dilational Model ridge formation is dominated by daily tidal cycling of a crack, which can be superimposed with regional secular dilation. The two sources of dilation can combine to form the various band morphologies observed. New GPS data along a rift on the Ross Ice Shelf, Antarctica is a suitable Earth analog to test the framework of Tufts' Dilational Model. As predicted by Tufts' Dilational Model, tensile failures in the Ross Ice Shelf exhibit secular dilation, upon which a tidal signal can be seen. From this analog we conclude that Tufts' Dilational Model for Europan ridges and bands may be credible and that the secular dilation is most likely from a regional source and not tidally driven.

Tectonics↗

Multispectral remote observations of hydrologic features on the North Slope of Alaska

Visible and near-infrared Landsat satellite imagery and active and passive aircraft microwave data are used to analyze some hydrologic features in Arctic Alaska. Lake studies using passive microwave imagery reveal that an increase in the microwave brightness temperature correlates with an increase in ice thickness. Synthetic Aperture Radar (SAR) imagery allows determination of lakes that are frozen to the bottom under certain conditions. Landsat imagery of lakes can be used to study summer ice cover dissipation, an indicator of lake depth. River channel morphometry and morphology studies are accomplished using SAR data with good (25 m) resolution. Landsat imagery is shown to be useful for analyzing interannual variations in the extent of river icings (aufeis). Snow depth variations are shown to be potentially discernable using passive microwave data. Finally, the present and potential applications of these remote sensing studies are discussed; these data are useful for locating potable water sources, planning construction in good locations, and for analyzing interannual climate fluctuations.

Hall, D. K.↗

Optical imaging of QSOs with 0.5 arcsec resolution

Optical imaging data are presented on 28 low redshift QSOs with 0.5 arcsec resolution. The group includes a range of radio and IR luminosities. The high-resolution data reveal significant new morphological information on 16 objects, and yield good luminosity profiles on all of them. Most objects appear to have R exp 1/4 law or peculiar luminosity profiles. The QSOs are almost all found to be in merging or interacting galaxies, most of them with a smaller companion. The observed structural details appear to be similar to lower luminosity AGN at low redshift. There are few unexplained features such as 'jets' near the nucleus. Detailed descriptions are given of all objects, including new high-resolution radio observations of a few of the QSOs.

Hutchings, J. B.↗

Properties of Subsurface Soil Cores from Four Geologic Provinces Surrounding Mars Desert Research Station, Utah: Characterizing Analog Martian Soil in a Human Exploration Scenario

The DOMEX program is a NASA-MMAMA funded project featuring simulations of human crews on Mars focused on science activities that involve collecting samples from the subsurface using both manual and robotic equipment methods and analyzing them in the field and post mission. A crew simulating a human mission to Mars performed activities focused on subsurface science for 2 weeks in November 2009 at Mars Desert Research Station near Hanksville, Utah --an important chemical and morphological Mars analog site. Activities performed included 1) survey of the area to identify geologic provinces, 2) obtaining soil and rock samples from each province and characterizing their mineralogy, chemistry, and biology; 3) site selection and reconnaissance for a future drilling mission; 4) deployment and testing of Mars Underground Mole, a percussive robotic soil sampling device; and 5) recording and analyzing how crew time was used to accomplish these tasks. This paper summarizes results from analysis of soil cores

Stoker, C. R.↗

Sedimentology of clastic rocks returned from the moon by Apollo 15.

A petrographic study of eleven samples of clastic rock returned from the moon by Apollo 15 suggests that two lithologies are present. The distinction between the two lithologies is based on the glass content of the rock matrices and the morphology of the detrital particles. Group I rocks have abundant, glass-rich, porous matrices and glass particles with morphologies comparable to those of glass particles in the lunar soil. The group I rocks were probably formed by welding or sintering of surficial soil deposits by impact-generated base surges of limited extent. Group II rocks have an essentially mineralic matrix and have an abundance of rounded mineral grains. Sample 15455 is the only Apollo 15 sample assigned to this group. In its general textural features, sample 15455 is comparable with the group II rocks from the Fra Mauro Formation at the Apollo 14 site. Textural features such as shock modification and rounding of mineral grains suggest that this sample is the product of a large-scale impact-generated base surge which possibly resulted from the Imbrian event.

Lindsay, J. F.↗

Mare basin filling on the moon - Laboratory simulations

Laboratory simulations of lavas filling a stylized lunar multi-ringed basin demonstrate several relationships between the morphology of the emplaced lavas and various eruption conditions. The rate of effusion is the primary control on the gross shape of the accumulated lavas, with relatively low rates (e.g., Hawaiian style) leading to shield volcanoes and high rates (e.g., flood eruptions) producing flat, ponded lavas. Pre-flow topography can have a significant effect on the general form of individual flows and the position of flow features such as lava channels. Rootless vents develop in many parts of the flow, including areas apparently related to the position of basin rings, giving the false appearance of aligned true vent systems.

Greeley, R.↗

Subkilometer Martian volcanoes - Properties and possible terrestrial analogs

Kilometer to subkilometer cones with large central craters are the most numerous volcanic structures in the northern plains of Mars. Based on examination of more than 12,000 high resolution Viking Orbiter images, most of these very small cones are located in parts of Eastern Acidalia and Utopia-Isidis-Elysium Planitia. Measurements of base and pit diameter for some 2000 well-resolved features show small variations in the histogram of base diameters between and within regions but remarkable similarity in the distribution of crater/cone diameter ratios. This suggests that the small cones had a similar origin with only minor variations in local conditions. The Acidalia cones are generally larger, more widely distributed, and occur on a greater variety of terrains than those in Utopia-Isidis-Elysium. Based on morphology, distribution, and the crater/cone ratio histograms, the smallest Martian cones may be similar to Icelandic pseudocraters. Somewhat larger, steeper cones with smaller crater/cone ratios which also occur in Eastern Acidalia may be analogs of terrestrial cinder cones.

Frey, H.↗

Rock Abrasion on Mars: Clues from the Pathfinder and Viking Landing Sites

A significant discovery of the Mars Pathfinder (MPF) mission was that many rocks exhibit characteristics of ventifacts, rocks that have been sculpted by saltating particles. Diagnostic features identifying the rocks as ventifacts am elongated pits, flutes, and grooves (collectively referred to as "flutes" unless noted otherwise). Faceted rocks or rock portions, circular pits, rills, and possibly polished rock surfaces are also seen and could be due, to aeolian abrasion. Many of these features were initially identified in rover images, where spatial resolution generally exceeded that of the IMP (Imager for Mars Pathfinder) camera. These images had two major limitations: 1) Only a limited number of rocks were viewed by the rover, biasing flute statistics; and 2) The higher resolution obtained by the rover images and the lack of such pictures at the Viking landing sites hampered comparisons of rock morphologies between the Pathfinder and Viking sites. To avoid this problem, rock morphology and ventifact statistics have been examined using new "super-resolution" IMP and Viking Lander images. Analyses of these images show that: 1) Flutes are seen on about 50% or more of the rocks in the near field at the MPF site; 2) The orientation of these flutes is similar to that for flutes identified in rover images; and 3) Ventifacts are significantly more abundant at the Pathfinder landing site than at the two Viking Landing sites, where rocks have undergone only a limited amount of aeolian abrasion. This is most likely due to the ruggedness of the Pathfinder site and a greater supply of abrading particles available shortly after the Arcs and Tiu Valles outflow channel floods.

Bridges, N. T.↗

Extraction of Martian valley networks from digital topography

We have developed a novel method for delineating valley networks on Mars. The valleys are inferred from digital topography by an autonomous computer algorithm as drainage networks, instead of being manually mapped from images. Individual drainage basins are precisely defined and reconstructed to restore flow continuity disrupted by craters. Drainage networks are extracted from their underlying basins using the contributing area threshold method. We demonstrate that such drainage networks coincide with mapped valley networks verifying that valley networks are indeed drainage systems. Our procedure is capable of delineating and analyzing valley networks with unparalleled speed and consistency. We have applied this method to 28 Noachian locations on Mars exhibiting prominent valley networks. All extracted networks have a planar morphology similar to that of terrestrial river networks. They are characterized by a drainage density of approx.0.1/km, low in comparison to the drainage density of terrestrial river networks. Slopes of "streams" in Martian valley networks decrease downstream at a slower rate than slopes of streams in terrestrial river networks. This analysis, based on a sizable data set of valley networks, reveals that although valley networks have some features pointing to their origin by precipitation-fed runoff erosion, their quantitative characteristics suggest that precipitation intensity and/or longevity of past pluvial climate were inadequate to develop mature drainage basins on Mars.

Stepinski, T. F.↗

The Complex Morphology of the Young Disk MWC 758: Spirals and Dust Clumps around a Large Cavity

We present Atacama Large Millimeter Array observations at an angular resolution of 0 1 - 0 2 of the disk surrounding the young Herbig Ae star MWC758. The data consist of images of the dust continuum emission recorded at 0.88 millimeter, as well as images of the 13CO and C18O J = 3-2 emission lines. The dust continuum emission is characterized by a large cavity of roughly 40 au in radius which might contain a mildly inner warped disk. The outer disk features two bright emission clumps at radii of ~47 and 82 au that present azimuthal extensions and form a double-ring structure. The comparison with radiative transfer models indicates that these two maxima of emission correspond to local increases in the dust surface density of about a factor 2.5 and 6.5 for the south and north clumps, respectively. The optically thick 13CO peak emission, which traces the temperature, and the dust continuum emission, which probes the disk mid plane, additionally reveal two spirals previously detected in near-IR at the disk surface. The spirals seen in the dust continuum emission present, however, a slight shift of a few au toward larger radii and one of the spirals crosses the south dust clump. Finally, we present different scenarios to explain the complex structure of the disk.

Atacama Large Millimeter Array↗

Particle/fluid simulations of an eruptive flare: Identifying the field-aligned currents responsible for the hard x-rays

While magnetohydrodynamics (MHD) can provide a reasonable description of the overall magnetic reconnection that is believed to drive flares, additional, and often separate processes have to be envoked to in order to explain the electron acceleration that is responsible for many of the observed flare emissions. A new model that incorporates the dynamic coronal current sheets, the reconnection site, and possible electron acceleration processes is developed through the use of two-dimensional particle and modified two-fluid simulations. The specific example of an eruptive flare driven by the coalescence of flux tubes supported by prescribed photospheric current elements is evaluated. It is shown that the electrons and ions have differential trajectories through the coronal current sheet which leads to the development of additonal plasma currents that flow around the surface of the current sheet. These surface currents are explicitly neglected in MHD but they are vital to the flare dynamics because they divert current from the coronal current sheet into the chromosphere, producing an effective resistivity that aids the development of fast reconnection. Because the surface currents are in the plane of the magnetic field, electrons in them experience strong acceleration and can account for the observed hard X-ray emissions. Model predictions are compared with observed time profiles of hard X-ray emissions and Doppler shifts seen in soft X-ray line emissions and are able to account for such features as (1) the asymmetry in the rise and decay time of the hard X-rays, (2) the apparent delay between the largest Doppler shifts and the hard X-ray peak, and (3) the relatively low intensity of the blue-shifted component. The use of particle and fluid simulations is important because it provides different, but complementary treatments of the electron acceleration, the global magnetic morphology, and the flare current system.

Winglee, R. M.↗

Field Detection of Chemical Assimilation in A Basaltic Lava Flow

Lava channels are features seen throughout the inner Solar System, including on Earth, the Moon, and Mars. Flow emplacement is therefore a crucial process in the shaping of planetary surfaces. Many studies, including some completed by members of this team at the December 1974 lava flow, have investigated the dynamics of lava flow emplacement, both on Earth and on the Moon and how pre-flow terrain can impact final channel morphology, but far fewer have focused on how the compositional characteristics of the substrate over which a flow was em-placed influenced its final flow morphology. Within the length of one flow, it is common for flows to change in morphology, a quality linked to rheology (a function of multiple factors including viscosi-ty, temperature, composition, etc.). The relationship between rheology and temperature has been well-studied but less is known about the relationship between an older flow's chemistry and how the interaction between this flow and the new flow might affect lava rheology and therefore emplacement dynamics. Lava erosion. Through visual observations of active terrestrial flows, mechanical erosion by flowing lava has been well-documented. Lava erosion by which flow composition is altered as the active lava melts and assimilates the pre-flow terrain over which it moves is also hypothesized to affect channel formation. However, there is only one previous field study that geochemically documents the process in recent basaltic flow systems.

Young, K. E.↗

Oblique, parallel, and quasi-parallel morphology of collisionless shocks

The question as to whether nonperpendicular, oblique shocks are disguised in the bow shock system by its infinite radius-of-curvature is addressed in light of the most recent data, which indicate that the quasi-perpendicular/quasi-parallel division is not merely real, but intrinsic. An attempt is presently made to summarize observational results on nonperpendicular shocks with the express intention of understanding the shock as an interactive structure that is dependent on the geometry of shock propagation. A foundation for the reconciliation of some rather complex or apparently contradictory quasi-parallel features is suggested.

Greenstadt, Eugene W.↗

Research on lunar Mare emplacement and impact cratering experiments

A model was derived enabling the interpretation of lunar styles of volcanism through the analysis of various surface features. The model was applied to several areas on the Moon, including the Orientale Basin, the Smythii Basin, the Herigonious region, and several highland areas. Concurrent with the application of the model, several topical studies of various aspects of lunar volcanism were completed. A series of impact crater experiments was conducted at NASA Ames in order to determine the effect that viscous targets would have on cratering mechanics and morphology for application in studies of Martian ejecta flow craters. The results of the experiments led to a model that can account for the formation of multiple flow lobes and the general morphology of some aspects of Martian craters.

Greeley, R.↗

Ridges on basalt flows

Pressure ridges are surface features on basaltic lava flows and, as with other surface features, they may be related to the emplacement of a flow and the rheological properties of the lava. Since many ridges are of sufficient size to be detected on high resolution orbital images, an understanding of pressure ridges could provide a means for interpreting volcanic flows on other terrestrial planets. Some proposed formation mechanisms are reviewed and three different types of pressure ridges are identified on the basis of morphology. Type 1 ridges are the most common and are associated with multiple flow unit pahoehoe in which the ridges are embayed by secondary toe fed lava. They tend to be restricted to wider sections or margins of the flow and to be oriented longitudinal to flow direction; however, oblique or transverse orientation is not uncommon. Bulbous squeeze ups are common within cracks and may reflect relative timing of crack formation. The interior structure of type 1 ridges consists of an upper slab section which generally contains columnar joints and a lower massive section with an irregular surface. This basic distinction may mark the thickness of the surface crust when ridge formation was initiated. Type 2 ridges occur in association with type 1 and are very similar with the exception of the secondary squeeze out material. Instead of only filling cracks, the secondary material on these ridges originated from underneath a thin crust and flowed as toes or channels from the top and sides of the ridge. Type 3 ridges have much steeper sides (almost vertical at the top) than the other types. Medial cracks are very wide and the crack walls are convex upward. No squeeze ups are present. The main difference between type 3 and the others may be reflection of viscosity.

Theilig, E.↗

The kinematics of the extended gas in the Seyfert galaxy NGC 3516

Long-slit spectroscopy of the extended gas in the Seyfert galaxy NGC 3516 reveals considerable substructure in the narrow emission lines with several kinematically distinct components visible in H-alpha and N II lambda 6583. The velocity measurements cover almost all of the 3 kpc scale, Z-shaped emission-line structure seen in narrow-band images and suggest that a significant rotational component is present. At large radii, strong deviations from this rotation are observed, indicating that a radial component of motion to the gas is also required to adequately describe the velocity field. There is a clear antisymmetry in these deviations with the velocities being blueshifted with respect to 'normal' galactic rotation on the southwest side of the nucleus and redshifted with respect to it on the northeast side. Although several models can be invoked to explain the observed velocities, the symmetries in the kinematics and emission-line morphology are most easily explained by a bent bipolar mass outflow from the nucleus. In this simple model, gas is ejected out of the plane of the stellar disk and is then slowed by gravitational forces. As the gas trajectory begins to bend, significant velocity deviations are produced. These observations provide some of the best kinematic evidence for mass outflow, although indirect arguments suggest they may be a common feature in many Seyfert galaxies.

Mulchaey, John S.↗

Discovery of intermediate redshift galaxy clusters in the ROSAT NEP field

We report preliminary results from a program to identify optical counterparts of ROSAT sources in the North Ecliptic Pole (NEP) region. The most striking X-ray feature reported by Hasinger et al. (1991) is an extended low surface brightness region of X-ray emission. Within the two X-ray contours of highest count rate we find a cluster of galaxies at a redshift of 0.09 and an early-type galaxy at a redshift of 0.03. X-ray emission from these objects may provide an explanation for the observed X-ray morphology. We also find evidence that other X-ray sources in this region are coincident with clusters or groups of galaxies at redshifts between 0.08 and 0.09. The presence of at least five X-ray detected clusters or groups in this narrow redshift band within a 1.5 deg radius field seems to indicate the existence of a moderate redshift supercluster. The existence of these clusters will have major implications for the study of large-scale structure through X-ray surveys such as ROSAT.

Burg, R.↗