Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Grail Refinements to Lunar Seismic Structure

To probe a planet's interior, seismology provides the most direct constraints on the variables that govern the dynamic properties of the body. However, the GRAIL (Gravity Recovery and Interior Laboratory) mission's high-resolution measurements of the lunar gravity field provide constraints on crustal thickness, mantle structure, core radius and stratification, and core state (solid vs. molten). These data complement seismic investigations, and joint interpretation permits improved constraints on the Moon's internal structure. Joint interpretation of disparate geophysical datasets helps reduce drawbacks that can result from analyzing them individually. The Apollo seismic network was situated on the lunar nearside surface in a roughly equilateral triangle having sides approximately 1000 km long, with stations 12/14 nearly co-located at one corner. Due to this limited geographical extent, near-surface ray coverage from moonquakes is low, but increase with depth. In comparison, gravity surveys and their resulting gravity anomaly maps have traditionally offered optimal resolution at crustal depths. Gravimetric maps and seismic data sets are therefor well suited to joint inversion, since the complementary information reduces inherent model ambiguity. We will perform a joint inversion of Apollo seismic delay times and gravity data collected by GRAIL lunar gravity mission, in order to recover seismic velocity and density as a function of latitude, longitude and depth within the Moon. We will relate density (rho) to seismic velocity (v) using a linear relationship that is allowed to be depth-dependent. The corresponding coefficient (B) can reflect a variety of material properties that vary with depth, including temperature and composition. The inversion seeks to recover the set of rho, v, and B perturbations that minimize (in a least-squares sense) the difference between the observed and calculated data.

Weber, Renee C.↗
DOE OSTI2026

Improved Regional Moment Tensor Inversion for Moderately Large Earthquakes in the Western United States Using a 3D Earth Model Based on Full Waveform Tomography

The nature of seismic sources for moderately large (moment magnitude, M w 5.0–6.5) events are commonly characterized by their moment tensor (MT) solutions and obtained by inversion of regional distance (200–1600 km) long‐period (20–50 s) waveforms. Regional MT estimates are often calculated from average plane‐layered, one‐dimensional (1D) velocity models. However, 1D model calculations can produce misfits in the arrival times and waveform shapes that introduce errors, particularly at longer distances or for shorter periods, which are necessary for analyzing lower magnitude events. Approximate Earth models (e.g., 1D) representing broad areas may be inadequate, particularly in the crust and uppermost mantle of tectonically complex regions. In this study, we show how a three‐dimensional (3D) Earth model obtained from full waveform inversion tomography can improve waveform fits and decrease phase errors. We developed a platform and workflow to perform routine 3D MT inversions and inverted MTs for 25 earthquakes in the western United States and seven nuclear explosions using an average 1D and a recent 3D Earth model, WUS256 (Rodgers et al., 2022). Using the 3D model improves waveform fits (variance reduction and phase time shifts) compared with the 1D model, and the 3D MT solutions are stable across large distances. This study shows that 3D models obtained from full waveform tomography can improve MTs and source characterization especially at far regional distances (>800 km).

Geosciences↗
NASA NTRS1987

Synergism requirements and concepts for SAR and HIRIS on EOS

A study is conducted to ascertain the synergistic advantages obtainable by combining, in the EOS orbital instrument platform, instruments for the optical and microwave measurements of biophysical properties important in ecosystem modeling. Attention is given to the comparative coverages of the SAR, HIRIS, TIMS and MODIS instruments that will be carried by the platform, and to the ongoing development of joint inversion algorithms for the modeling of the ecosystems-related data thus obtained. A three-dimensional characterization of the physical attributes of the vegetation canopy and its background surface will be attempted.

Cimino, J. B.↗
NASA NTRS1992

Calculation of fully three-dimensional separated flow with an unsteady viscous-inviscid interaction method

Three previous papers have shown that the viscous inviscid numerical methods were capable of calculating separated turbulent flows. The 'Semi-inverse method' and the models of the first author allow the computation of massive separations, stalled flows, and shock wave-boundary layer interactions, in two-dimensional or quasi-three-dimensional conditions, from low speeds to supersonic speeds. The 'Semi-implicit' method for time-consistent coupling allows for the computation of time-accurate transonic separated flow and buffer computations in two-dimensions. The present paper shows that the viscous-inviscid interaction approach is also able to compute the fully three-dimensional flow separation phenomena. The method is based on a thin-layer approximation of the theory of 'Defect-Formulation' that provides the viscous-inviscid splitting of the Navier-Stokes equations. A parametric analytical modelling of the 3D-turbulent velocity profiles is involved. Numerically, the 3D-velocity profiles are discretized in the normal z-direction and driven by parametric integral 3D-equations in direct or inverse modes in the x-direction. The viscous-inviscid coupling is fully 3D and solved the time-consistency problem with an extension of the 'Semi-implicit' method previously suggested in two-dimensions. A 3D inviscid subroutine with TSP approximation is used. Results are obtained for transonic steady flows over wings with shock-induced transonic separation. The method provides results for highly three-dimensional flow separations, such as induced by a three-dimensional through at the wall of a flat plate. The 3D viscous-inviscid coupling and the 3D model of the velocity field provide three-dimensional instantaneous skin-friction lines whose patterns exhibit the same complex topology as Navier-Stokes solvers, with foci, nodes, and saddle-points.

Leballeur, J. C.↗
DOE OSTI2022

Computer Model Calibration with Time Series Data Using Deep Learning and Quantile Regression

Computer models play a key role in many scientific and engineering problems. One major source of uncertainty in computer model experiments is input parameter uncertainty. Computer model calibration is a formal statistical procedure to infer input parameters by combining information from model runs and observational data. The existing standard calibration framework suffers from inferential issues when the model output and observational data are high-dimensional dependent data, such as large time series, due to the difficulty in building an emulator and the nonidentifiability between effects from input parameters and data-model discrepancy. To overcome these challenges, we, in this work, propose a new calibration framework based on a deep neural network (DNN) with long short-term memory layers that directly emulates the inverse relationship between the model output and input parameters. Adopting the “learning with noise” idea, we train our DNN model to filter out the effects from data-model discrepancy on input parameter inference. We also formulate a new way to construct interval predictions for DNN using quantile regression to quantify the uncertainty in input parameter estimates. Through a simulation study and real data application with the Weather Research and Forecasting Model Hydrological modeling system (WRF-Hydro), we show our approach can yield accurate point estimates and well-calibrated interval estimates for input parameters.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

An Inverse Chance-constrained Approach to the Calibration of Robust Models

This paper proposes a strategy to calibrate computational models according to uncertain input-output data. To this end, uncertainty in the data is first quantified by creating adversarial data sets. Samples drawn from such sets are then mapped from the input-output space to the parameter space using an inverse mapping. This mapping minimizes the collective output spread of an ensemble of point predictions while satisfying a set of individual data-matching requirements. The distribution of the resulting parameter points, which often exhibits strong parameter dependencies, is then modeled using sliced-normals. The chance-constrained formulation used to learn this distribution enables the analyst to trade-off a greater likelihood for most of the data against a lower likelihood for some of the data thereby relaxing the conservatism of the calibrated model. This formulation not only neglects the worst-performing quantiles of each adversarial distribution but also eliminates the potentially serious effects that outliers might have on the resulting model. This calibration approach not only has a considerably lower computational cost than the standard forward approach but it also allows for the identification of suitable distribution classes, which in turn yield better calibrated models.

Calibration↗
NASA NTRS2008

Improving Coastal Ocean Color Validation Capabilities through Application of Inherent Optical Properties (IOPs)

Understanding how the different components of seawater alter the path of incident sunlight through scattering and absorption is essential to using remotely sensed ocean color observations effectively. This is particularly apropos in coastal waters where the different optically significant components (phytoplankton, detrital material, inorganic minerals, etc.) vary widely in concentration, often independently from one another. Inherent Optical Properties (IOPs) form the link between these biogeochemical constituents and the Apparent Optical Properties (AOPs). understanding this interrelationship is at the heart of successfully carrying out inversions of satellite-measured radiance to biogeochemical properties. While sufficient covariation of seawater constituents in case I waters typically allows empirical algorithms connecting AOPs and biogeochemical parameters to behave well, these empirical algorithms normally do not hold for case I1 regimes (Carder et al. 2003). Validation in the context of ocean color remote sensing refers to in-situ measurements used to verify or characterize algorithm products or any assumption used as input to an algorithm. In this project, validation capabilities are considered those measurement capabilities, techniques, methods, models, etc. that allow effective validation. Enhancing current validation capabilities by incorporating state-of-the-art IOP measurements and optical models is the purpose of this work. Involved in this pursuit is improving core IOP measurement capabilities (spectral, angular, spatio-temporal resolutions), improving our understanding of the behavior of analytical AOP-IOP approximations in complex coastal waters, and improving the spatial and temporal resolution of biogeochemical data for validation by applying biogeochemical-IOP inversion models so that these parameters can be computed from real-time IOP sensors with high sampling rates. Research cruises supported by this project provides for collection and processing of seawater samples for biogeochemical (pigments, DOC and POC) and optical (CDOM and POM absorption coefficients) analyses to enhance our understanding of the linkages between in-water optical measurements (IOPs and AOPs) and biogeochemical constituents and to provide a more comprehensive suite of validation products.

Mannino, Antonio↗
DOE OSTI2020

Magneto-electroluminescence response in 2D and 3D hybrid organic–inorganic perovskite light emitting diodes

We have studied the magneto-electroluminescence (MEL) response in light emitting diodes based on 2D-(PEA) 2 PbI 4 and 3D-MAPbI 3 hybrid organic–inorganic perovskites at cryogenic temperatures. We found that the MEL is negative, i.e., the EL decreases with the applied field strength, B. In addition, the MEL(B) response has a Lorentzian line shape whose width depends on the perovskite used. We interpret the MEL(B) response using the “Δg mechanism” in which the spin of the injected electron–hole (e–h) pairs oscillates between singlet and triplet configurations due to different precession frequencies of the electron and hole constituents that originate from the difference, Δg, in the electron and hole gyromagnetic constants, g. In this model, the MEL(B) linewidth is inversely proportional to the spin lifetime and Δg. The model used is validated by directly measuring the spin lifetime of photogenerated e–h pairs using the circularly polarized pump–probe transmission technique with 100 fs resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Permafrost, Peatland, and Cropland Regions Are Key to Reconciling North American Carbon Sink Estimates

Persistent discrepancies between bottom-up, terrestrial biosphere models (TBMs), and top-down, atmospheric inversions, have made it difficult to quantify the magnitude of the North American terrestrial carbon sink. Previous studies have compared aggregated continent-scale estimates of carbon fluxes from TBMs and inversions for all of North America, but this provides limited insights into finer-scale mismatches that contribute to the overall discrepancies. Here we evaluate agreement between TBM and inversion carbon flux estimates at 1° × 1° resolution to provide more direct insights into where models disagree and what underlying factors drive discrepancies. We find that the additional carbon uptake estimated by inversions, in just 16% of the area of North America, is large enough to account for the discrepancy between TBMs and inversions across the whole continent. The majority of these differences occur in permafrost, peatland, and cropland regions. In these regions, we find a higher likelihood of potential biases in the weaker sink estimates from TBMs, suggesting that the stronger sink implied by inversions is more likely to be realistic. However, the current observational coverage is insufficient for fully assessing the causes of discrepancies or the magnitude of biases in either approach. Encouragingly, improved representation of agricultural processes in a TBM led to better agreement with inversions in croplands. Efforts to accurately model cropland dynamics will help improve agreement between TBMs and inversions. Overall, this work presents a clear path for reconciling the discrepancies between inversion and TBM estimates of the North American carbon sink that have persisted for two decades.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

ML-based Dimension Reduction Strategies

Deep learning (DL)--based surrogate models have achieved success in various applications in carbon capture and storage (CCS). However, the model training on high-dimensional spaces is computationally expensive and impractical for large-scale and complex geological models, because the models usually contain hundreds of thousands to millions of grid cells, each with a set of parameters. Furthermore, the high cost of generating training data with sufficient variation is another limitation of model training on high-dimensional spaces, which may result in overfitting and reduce the model efficiency and prediction performance. We proposed the workflow incorporating dimension reduction methods and deep learning models, which aim to extract the latent variables of input parameters and output state variables, and then build the mapping function at the latent spaces. The proposed workflow can significantly reduce the computational complexity in solving both forward and inverse problems compared to models trained on high-dimensional spaces. Dimensionality reduction models showed great potential in workflows for fast reservoir simulation, history matching, prior model generation, visualization, and more, ultimately enhancing DL model performance in related SMART Work Packages.

Hosseini, Seyyed↗
NASA NTRS1985

The magnetic field at the core-mantle boundary

Models of the geomagnetic field are, in general, produced from a least-squares fit of the coefficients in a truncated spherical harmonic expansion to the available data. Downward continuation of such models to the core-mantle boundary (CMB) is an unstable process: the results are found to be critically dependent on the choice of truncation level. Modern techniques allow this fundamental difficulty to be circumvented. The method of stochastic inversion is applied to modeling the geomagnetic field. Prior information is introduced by requiring that the spectrum of spherical harmonic coefficients to fall-off in a particular manner which is consistent with the Ohmic heating in the core having a finite lower bound. This results in models with finite errors in the radial field at the CMB. Curves of zero radial field can then be determined and integrals of the radial field over patches on the CMB bounded by these null-flux curves calculated. With the assumption of negligible magnetic diffusion in the core; frozen-flux hypothesis, these integrals are time-invariant.

Bloxham, J.↗
NASA NTRS1983

Remote sensing of row crop structure and component temperatures using directional radiometric temperatures and inversion techniques

A physically based sensor response model of a row crop was used as the mathematical framework from which several inversion strategies were tested for extracting row structure information and component temperatures using a series of sensor view angles. The technique was evaluated on ground-based radiometric thermal infrared data of a cotton row crop that covered 48 percent of the ground in the vertical projection. The results showed that the accuracies of the predicted row heights and widths, vegetation temperatures, and soil temperatures of the cotton row crop were on the order of 5 cm, 1 deg, and 2 deg C, respectively. The inversion techniques can be applied to directional sensor data from aircraft platforms and even space platforms if the effects of atmospheric absorption and emission can be corrected. In theory, such inversion techniques can be applied to a wide variety of vegetation types and thus can have significant implications for remote sensing research and applications in disciplines that deal with incomplete vegetation canopies.

Kimes, D. S.↗
NASA NTRS2007

Progress in Modeling Global Atmospheric CO2 Fluxes and Transport: Results from Simulations with Diurnal Fluxes

Progress in better determining CO2 sources and sinks will almost certainly rely on utilization of more extensive and intensive CO2 and related observations including those from satellite remote sensing. Use of advanced data requires improved modeling and analysis capability. Under NASA Carbon Cycle Science support we seek to develop and integrate improved formulations for 1) atmospheric transport, 2) terrestrial uptake and release, 3) biomass and 4) fossil fuel burning, and 5) observational data analysis including inverse calculations. The transport modeling is based on meteorological data assimilation analysis from the Goddard Modeling and Assimilation Office. Use of assimilated met data enables model comparison to CO2 and other observations across a wide range of scales of variability. In this presentation we focus on the short end of the temporal variability spectrum: hourly to synoptic to seasonal. Using CO2 fluxes at varying temporal resolution from the SIB 2 and CASA biosphere models, we examine the model's ability to simulate CO2 variability in comparison to observations at different times, locations, and altitudes. We find that the model can resolve much of the variability in the observations, although there are limits imposed by vertical resolution of boundary layer processes. The influence of key process representations is inferred. The high degree of fidelity in these simulations leads us to anticipate incorporation of realtime, highly resolved observations into a multiscale carbon cycle analysis system that will begin to bridge the gap between top-down and bottom-up flux estimation, which is a primary focus of NACP.

Collatz, G. James↗
DOE OSTI2022

A combined experimental and numerical approach that eliminates the non-uniqueness associated with the Johnson-Cook parameters obtained using inverse methods

Abstract Johnson-Cook constitutive model is a commonly used material model for machining simulations. The model includes five parameters that capture the initial yield stress, strain-hardening, strain-rate hardening, and thermal softening behavior of the material. These parameters are difficult to determine using experiments since the conditions observed during machining (such as high strain-rates of the order of $$10^5$$ 10 5 /sec - $$10^6$$ 10 6 /sec) are challenging to recreate in the laboratory. To address this problem, several researchers have recently proposed inverse approaches where a combination of experiments and analytical models are used to predict the Johnson-Cook parameters. The errors between the measured cutting forces, chip thicknesses and temperatures and those predicted by analytical models are minimized and the parameters are determined. In this work, it is shown that only two of the five Johnson-Cook parameters can be determined uniquely using inverse approaches. Two different algorithms, namely, Adaptive Memory Programming for Global Optimization (AMPGO) and Particle Swarm Optimization (PSO), are used for this purpose. The extended Oxley’s model is used as the analytical tool for optimization. For determining a parameter’s value, a large range for each parameter is provided as an input to the algorithms. The algorithms converge to several different sets of values for the five Johnson-Cook parameters when all the five parameters are considered as unknown in the optimization algorithm. All of these sets, however, yield the same chip shape and cutting forces in FEM simulations. Further analyses show that only the strain-rate and thermal softening parameters can be determined uniquely and the three parameters present in the strain-hardening term of the Johnson-Cook model cannot be determined uniquely using the inverse method. A combined experimental and numerical approach is proposed to eliminate this determine all parameters uniquely.

42 ENGINEERING↗
DOE OSTI2025

Quantifying uncertainty in regional-scale seismic moment tensors

We examine the ability of three different inversion methods: 1) first motion (FM) inversions, 2) amplitude inversions, and 3) full waveform (FW) time variable moment tensor (TVMT) inversions, to recover an accurate source mechanism for simulated data for an earthquake as well as an explosion. The ability of inversion methods, such as the ones described above, to recover accurate models representative of the data depends on both a priori information as well as the quality of data being inverted. Therefore, we examine the effect that station geometry, geologic model, and noise level has on the inversion and estimated source mechanism. We find that FM data can provide more robust solutions than amplitude data and are not as sensitive to inaccurate earth models, especially in low-noise cases, and overall FW inversions are the most accurate out of the methods examined, but can still be biased by inaccurate earth models.

58 GEOSCIENCES↗
NASA NTRS1979

Wave tilt sounding of multilayered structures

The relationship between the wave tilt and the electrical parameters of a multilayered structure is investigated. Particular emphasis is placed on the inverse problem associated with the sounding planetary surfaces. An inversion technique, based on multifrequency wave tilt, is proposed and demonstrated with several computer models. It is determined that there is close agreement between the electrical parameters used in the models and those in the inversion values.

Warne, L.↗