Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model data volumes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

A 50-kW Module Power Station of Directly Solar-Pumped Iodine Laser

The conceptual design of a 50 kW Directly Solar-Pumped Iodine Laser (DSPIL) module was developed for a space-based power station which transmits its coherent-beam power to users such as the moon, Martian rovers, or other satellites with large (greater than 25 kW) electric power requirements. Integration of multiple modules would provide an amount of power that exceeds the power of a single module by combining and directing the coherent beams to the user's receiver. The model developed for the DSPIL system conservatively predicts the laser output power (50 kW) that appears much less than the laser output (93 kW) obtained from the gain volume ratio extrapolation of experimental data. The difference in laser outputs may be attributed to reflector configurations adopted in both design and experiment. Even though the photon absorption by multiple reflections in experimental cavity setup was more efficient, the maximum secondary absorption amounts to be only 24.7 percent of the primary. However, the gain volume ratio shows 86 percent more power output than theoretical estimation that is roughly 60 percent more than the contribution by the secondary absorption. Such a difference indicates that the theoretical model adopted in the study underestimates the overall performance of the DSPIL. This fact may tolerate more flexible and radical selection of design parameters than used in this design study. The design achieves an overall specific power of approximately 5 W/kg and total mass of 10 metric tons.

Choi, S. H.↗
NASA NTRS1992

Thermal Expert System (TEXSYS): Systems automony demonstration project, volume 1. Overview

The Systems Autonomy Demonstration Project (SADP) produced a knowledge-based real-time control system for control and fault detection, isolation, and recovery (FDIR) of a prototype two-phase Space Station Freedom external active thermal control system (EATCS). The Thermal Expert System (TEXSYS) was demonstrated in recent tests to be capable of reliable fault anticipation and detection, as well as ordinary control of the thermal bus. Performance requirements were addressed by adopting a hierarchical symbolic control approach-layering model-based expert system software on a conventional, numerical data acquisition and control system. The model-based reasoning capabilities of TEXSYS were shown to be advantageous over typical rule-based expert systems, particularly for detection of unforeseen faults and sensor failures. Volume 1 gives a project overview and testing highlights. Volume 2 provides detail on the EATCS test bed, test operations, and online test results. Appendix A is a test archive, while Appendix B is a compendium of design and user manuals for the TEXSYS software.

Glass, B. J.↗
NASA NTRS1992

Thermal Expert System (TEXSYS): Systems autonomy demonstration project, volume 2. Results

The Systems Autonomy Demonstration Project (SADP) produced a knowledge-based real-time control system for control and fault detection, isolation, and recovery (FDIR) of a prototype two-phase Space Station Freedom external active thermal control system (EATCS). The Thermal Expert System (TEXSYS) was demonstrated in recent tests to be capable of reliable fault anticipation and detection, as well as ordinary control of the thermal bus. Performance requirements were addressed by adopting a hierarchical symbolic control approach-layering model-based expert system software on a conventional, numerical data acquisition and control system. The model-based reasoning capabilities of TEXSYS were shown to be advantageous over typical rule-based expert systems, particularly for detection of unforeseen faults and sensor failures. Volume 1 gives a project overview and testing highlights. Volume 2 provides detail on the EATCS testbed, test operations, and online test results. Appendix A is a test archive, while Appendix B is a compendium of design and user manuals for the TEXSYS software.

Glass, B. J.↗
DOE OSTI2020

Gaining Perspective on Unconventional Well Design Choices through Play-level Application of Machine Learning Modeling

The recent development of unconventional oil and gas (O&G) reservoirs has led to an abundant hydrocarbon supply, both domestically and globally. However, there is a continued push to develop new and innovative approaches to improve exploration and extraction efficiencies and overall well productivity moving forward. Substantial improvements in unconventional O&G development are expected through optimized well completion and stimulation strategies aimed at maximizing well productivity. Optimizing well designs will require tailoring to the distinctive geologic conditions present for any newly placed well. To better evaluate the impact of well design attributes and their associated interactions on productivity in a major unconventional play, multivariate machine learning-based models that use empirical datasets were developed. A gradient boosted regression tree (GBRT) algorithm was applied. GBRT has been narrowly investigated for O&G applications but enables straightforward parametric importance and influence evaluation, as well as assessment of parameter interaction effects. Models were trained on well design and locational parameters that serve as a proxy for variable geologic conditions to estimate two types of productivity indicator response variables strongly correlated to estimated ultimate recovery (EUR). The dataset utilized consists of over 7,000 well observations that cover the majority of the productive region of the Marcellus Shale. Model performance was evaluated and algorithm parameters tuned by analyzing the goodness-of-fit for simulated results against observed data in a cross-validation approach. Models were found capable of 73–79 percent prediction accuracy on held out testing data of gas equivalent production and can be used to inform future well design and placement decisions for increasing EUR per well and improving overall field-level recovery. Study results indicate that Marcellus well performance improves most with upscaling perforated interval lengths and water and proppant volumes per foot; but relative productivity improvements are spatially dependent across the play. Finally, optimal combinations of water and proppant on well performance were found to vary depending on well location, emphasizing the utility of data-driven models capable of broad application across a play of interest for informing tailored well design approaches prior to their field deployment.

04 OIL SHALES AND TAR SANDS↗
NASA NTRSDate not supplied

Earth-Independent Medical Operations (EIMO) Concept of Operations

In contrast to the current crew health paradigm for low-Earth orbit and Lunar missions, which depends on real-time communication with Mission Control, deep-space exploration missions will require a significant shift in medical operations. This shift is driven by the constraints of operating at a considerable distance from Earth, such as resource limitations—lack of resupply, restricted mass, power, volume, and data—as well as communication delays and the inability to evacuate back to Earth during emergencies. To move toward a more self-reliant medical model, a strategy is needed to gradually increase space-based crew autonomy and reduce risks to mission success in the challenging environment of deep space. This transformative change, known as "Earth-Independent Medical Operations" (EIMO), explores the gradual transfer of medical care and decision-making from Earth-based support to space-based systems. The goal of this transition is to enhance astronaut health and performance while minimizing mission risks. EIMO requires the development of a medical system that integrates seamlessly with mission planning, vehicle and spacesuit design, and data architecture. This integration is crucial for building a robust medical infrastructure that not only safeguards astronaut well-being but also ensures overall mission success. The Human Research Program (HRP) Exploration Medical Capability (ExMC) Element has revised the EIMO model-based Concept of Operations (ConOps) which outlines an initial vision for EIMO. The ConOps, which is built on the stakeholders’ need, system goals, and objectives (NGOs), presents an array of in-mission scenarios that span a wide range of medical conditions demonstrating the system’s capabilities from basic to complex events. Developed by a multidisciplinary team of systems engineers, scientists, and clinicians within ExMC, the ConOps revision includes two new scenarios(Barotrauma and Self-Medical Management and Behavioral Health and Chronic Medical Care), and implementation of findings from EIMO technical interchange meetings that focused on data and training. The envisioned EIMO Medical System (MS) operates as a system of systems, gathering data from various sources such as reference databases, real-time wearable sensors, point-of-care diagnostics, and environmental controls. The MS also incorporates advanced training tools to support autonomous medical care, assisting the Crew Medical Officer (CMO) during medical events where Ground Support is either unavailable or communication-delayed beyond practicality. Furthermore, MS functions and capabilities were decomposed from the scenarios to establish foundational requirements for EIMO and traced to the NASA Spaceflight Human-System Standard(NASA-STD-3001, Volumes 1 and 2). These traces were performed to gain insights on the alignment of EIMO requirements with the NASA standard. This work serves as an initial recommendation to increase crew autonomy gradually and safely for Mars missions and future deep-space exploration.

medical system↗
DOE OSTI2025

Data Quality Monitoring for the Hadron Calorimeters Using Transfer Learning for Anomaly Detection

The proliferation of sensors brings an immense volume of spatio-temporal (ST) data in many domains, including monitoring, diagnostics, and prognostics applications. Data curation is a time-consuming process for a large volume of data, making it challenging and expensive to deploy data analytics platforms in new environments. Transfer learning (TL) mechanisms promise to mitigate data sparsity and model complexity by utilizing pre-trained models for a new task. Despite the triumph of TL in fields like computer vision and natural language processing, efforts on complex ST models for anomaly detection (AD) applications are limited. In this study, we present the potential of TL within the context of high-dimensional ST AD with a hybrid autoencoder architecture, incorporating convolutional, graph, and recurrent neural networks. Motivated by the need for improved model accuracy and robustness, particularly in scenarios with limited training data on systems with thousands of sensors, this research investigates the transferability of models trained on different sections of the Hadron Calorimeter of the Compact Muon Solenoid experiment at CERN. The key contributions of the study include exploring TL’s potential and limitations within the context of encoder and decoder networks, revealing insights into model initialization and training configurations that enhance performance while substantially reducing trainable parameters and mitigating data contamination effects.

47 OTHER INSTRUMENTATION↗
NASA NTRS1984

Scattering Models in the Microwave Regime

Vegetation growth observations by microwave scattering was investigated. The purpose of the study was: (1) to develop scattering models for an inhomogeneous medium; (2) to develop scattering models for an irregular surface; (3) to combine volume and surface scattering to obtain useful scattering and emission models for terrains; and (4) to apply the developed model to the interpretation of measured data and the design of future experiments.

Fung, A. K.↗
NASA NTRS1984

Comparison of Land Cover Information from LANDSAT Multispectral Scanner (MSS) and Airborne Thematic Mapper Simulator (TMS) Data for Hydrologic Applications

Detailed land cover classifications were performed on the Thematic Mapper Simulator (TMS) and MSS data of the Clinton River Basin (acquired on August 19, 1981, and June 28, 1980, respectively) using supervised classification techniques. Differences in interclass separability were compared to select several promising TMS band combinations, selected from the 27 covering the Clinton River Basin. The TMS data produced a more accurate and spatially contiguous classification than MSS for this study site. While the accuracy of the 4-band TM data set was as good as the 7-band, the 3-band TMS data sets were also better than the MSS. These results indicate that both the increased spectral discrimination and spatial resolution contribute to improved classification accuracy. The possibility of reducing the data analysis burden associated with large TM data volumes through effective band selection therefore appears promising. The implications of the improved classification accuracy of TMS data are important for hydrologic and economic modeling. In particular, the higher accuracies for the developed categories (residential and commercial) should improve the predictions of runoff in flood forecasting models and of flood damage for damage calculation models appreciably.

Gervin, J. C.↗
NASA NTRS1986

Hydrostatic compression of Fe(1-x)O wuestite

Hydrostatic compression measurements on Fe(0.95)O wuestite up to 12 GPa yield a room temperature value for the isothermal bulk modulus of K(ot) = 157 (+ or - 10) GPa at zero pressure. This result is in accord with previous hydrostatic and nonhydrostatic measurements of K(ot) for wuestites of composition: 0.89 = Fe/O 0.95. Dynamic measurements of the bulk modulus by ultrasonic, shock-wave and neutron-scattering experiments tend to yield a larger value: K(ot) approximately 180 GPa. The discrepancy between static and dynamic values cannot be explained by the variation of K(ot) with composition, as has been proposed. This conclusion is based on high-precision compression data and on theoretical models of the effects of defects on elastic constants. Barring serious errors in the published measurements, the available data suggest that wuestite exhibits a volume relaxation under pressure.

Jeanloz, R.↗
NASA NTRS1989

L2F and LDV velocimetry measurement and analysis of the 3-D flow field in a centrifugal compressor

The flow field in the Purdue Research Centrifugal Compressor is studied using a laser two-focus (L2F) velocimeter. L2F data are obtained which quantify: (1) the compressor inlet flow field; (2) the steady-state velocity field in the impeller blade passages; and (3) the flow field in the radial diffuser. The L2F data are compared with both laser Doppler velocimetry (LDV) data and predictions from three-dimensional inviscid and viscous flow models. In addition, a model is developed to calculate the effect on the measurement volume geometry of refraction by curved windows. Finally, the advantages and disadvantages of using the L2F for turbomachinery measurements is discussed in terms of measurement accuracy, ease of use, including sample time per correlated event and the ability to make measurements in regions of high noise due to stray radiation from wall reflections.

Fagan, John R., Jr.↗
NASA NTRS1990

Surface definition and grid generation about an Assured Crew Return Vehicle (ACRV) for Space Station Freedom

The surface definition and grid generation about an Assured Crew Return Vehicle (ACRV) for the Space Station Freedom are described. The purpose of the surface definition and grid generation is to provide the necessary geometry information for CFD calculations about the vehicle. There are two salient features in this description. The first is that the numerical model representing the ACRV configuration is obtained from the measurement of an existing wind tunnel model. The method for smoothing the measured data and obtaining the numerical model is described. The second feature is the description of the algebraic grid generation method and software to compute volume grids about the ACRV. The methods and software allow rapid computation of volume grids for a wide range of flow conditions.

Smith, R. E.↗
NASA NTRS1986

Aerobic Fitness Does Not Contribute to Prediction of Orthostatic Intolerance

Several investigations have suggested that orthostatic tolerance may be inversely related to aerobic fitness (VO (sub 2max)). To test this hypothesis, 18 males (age 29 to 51 yr) underwent both treadmill VO(sub 2max) determination and graded lower body negative pressures (LBNP) exposure to tolerance. VO(2max) was measured during the last minute of a Bruce treadmill protocol. LBNP was terminated based on pre-syncopal symptoms and LBNP tolerance (peak LBNP) was expressed as the cumulative product of LBNP and time (torr-min). Changes in heart rate, stroke volume cardiac output, blood pressure and impedance rheographic indices of mid-thigh-leg initial accumulation were measured at rest and during the final minute of LBNP. For all 18 subjects, mean (plus or minus SE) fluid accumulation index and leg venous compliance index at peak LBNP were 139 plus or minus 3.9 plus or minus 0.4 ml-torr-min(exp -2) x 10(exp 3), respectively. Pearson product-moment correlations and step-wise linear regression were used to investigate relationships with peak LBNP. Variables associated with endurance training, such as VO(sub 2max) and percent body fat were not found to correlate significantly (P is less than 0.05) with peak LBNP and did not add sufficiently to the prediction of peak LBNP to be included in the step-wise regression model. The step-wise regression model included only fluid accumulation index leg venous compliance index, and blood volume and resulted in a squared multiple correlation coefficient of 0.978. These data do not support the hypothesis that orthostatic tolerance as measured by LBNP is lower in individuals with high aerobic fitness.

Convertino, Victor A.↗
NASA NTRS1997

Application of Laser Scanning Confocal Microscopy to Heat and Mass Transport Modeling in Porous Microstructures

Laser Scanning Confocal Microscopy (LSCM) has been used to obtain digital images of the complicated 3-D (three-dimensional) microstructures of rigid, fibrous thermal protection system (TPS) materials. These orthotropic materials are comprised of refractory ceramic fibers with diameters in the range of 1 to 10 microns and have open porosities of 0.8 or more. Algorithms are being constructed to extract quantitative microstructural information from the digital data so that it may be applied to specific heat and mass transport modeling efforts; such information includes, for example, the solid and pore volume fractions, the internal surface area per volume, fiber diameter distributions, and fiber orientation distributions. This type of information is difficult to obtain in general, yet it is directly relevant to many computational efforts which seek to model macroscopic thermophysical phenomena in terms of microscopic mechanisms or interactions. Two such computational efforts for fibrous TPS materials are: i) the calculation of radiative transport properties; ii) the modeling of gas permeabilities.

Marshall, Jochen↗
NASA NTRS2022

A Deep Learning Approach to Fast Radiative Transfer

Due to the sheer volume of data, leveraging satellite instrument observations effectively in a data assimilation context for numerical weather prediction or for remote sensing requires a radiative transfer model as an observation operator that is both fast and accurate at the same time. Physics-based line-by-line radiative transfer (RT) models fulfil the requirement for accuracy, but are too slow and too costly in computational terms for operational applications. Therefore, fast methods were developed to be able to perform fast RT calculations using techniques such as spectral sampling or pre-computed look-up tables. The operational fast models currently calculate the absorption and scattering coefficients from the pre-computed regression coefficients and atmospheric state and cloud profiles. As a novel solution to this problem, this work investigates a deep learning approach to replace the regression coefficients in the fast RT models. A selection of hidden-layer neural network configurations is trained against atmospheric transmittance profile data computed by an accurate line-by-line model and their performance is evaluated and their advantages and disadvantages are discussed.

Machine learning↗
NASA NTRS1975

Hypersonic aeroheating test of space shuttle vehicle configuration 3 (model 22-OTS) in the NASA-Ames 3.5-foot hypersonic wind tunnel (IH20), volume 1

The results of hypersonic wind tunnel testing of an 0.0175 scale version of the vehicle 3 space shuttle configuration are presented. Temperature measurements were made on the launch configuration, orbiter plus tank, orbiter alone, tank alone, and solid rocket booster alone to provide heat transfer data. The test was conducted at free-stream Mach numbers of 5.3 and 7.3 and at free-stream Reynolds numbers of 1.5 million, 3.7 million, 5.0 million, and 7.0 million per foot. The model was tested at angles of attack from -5 deg to 20 deg and side slip angles of -5 deg and 0 deg.

Kingsland, R. B.↗
DOE OSTI2023

FUN-BioCROP model with litter decomposition parameters derived from the LIDET dataset

This repository contains the code and data necessary to run the FUN-BioCROP (Fixation and Uptake of Nitrogen-Bioenergy Carbon, Rhizosphere, Organisms, and Protection) model with litter decomposition parameters derived from a modified Monte Carlo simulation that used the Long-term Intersite Decomposition Experiment Team dataset. Related publication:Juice, S.M., Ridgeway, J.R., Hartman, M.D., Parton, W.J., Berardi, D.M., Sulman, B.N., Allen, K.E., & Brzostek, E.R. Reparameterizing litter decomposition using a simplified Monte Carlo method improves litter decay simulated by a microbial model and alters bioenergy soil carbon estimates. Description of Files: FUNBioCROP_LIDET Study.Rmd R code with FUN-BioCROP model that can be run with 10 different sets of parameters for litter decomposition (Baseline, LIDET, or eight other best parameter sets identified in the modified Monte Carlo simulation. CORPSE Functions_Bioenergy_V2.R Code with CORPSE model functions, called by FUNBioCROP_LIDET Study.Rmd Model Input Data: bulk.csv, bulk_till.csv, rhizo.csv, rhizo_till.csv, litter.csv Initial C and N (kg C or N/m2) pool values for each soil compartment, final values from spin up. All five files have the same columns: (Column - Description - Units) uFastC - Unprotected fast decomposing carbon - kg carbon/m2 uSlowC - Unprotected slow decomposing carbon - kg carbon/m2 uNecroC - Unprotected necromass carbon - kg carbon/m2 pFastC - Protected fast decomposing carbon - kg carbon/m2 pSlowC - Protected slow decomposing carbon - kg carbon/m2 pNecroC - Protected necromass carbon - kg carbon/m2 livingMicrobeC - Carbon in living microbial biomass - kg carbon/m2 uFastN - Unprotected fast decomposing nitrogen - kg nitrogen/m2 uSlowN - Unprotected slow decomposing nitrogen - kg nitrogen/m2 uNecroN - Unprotected necromass nitrogen - kg nitrogen/m2 pFastN - Protected fast decomposing nitrogen - kg nitrogen/m2 pSlowN - Protected slow decomposing nitrogen - kg nitrogen/m2 pNecroN - Protected necromass nitrogen - kg nitrogen/m2 inorganicN - Inorganic nitrogen - kg nitrogen/m2 CO2 - Carbon in carbon dioxide - kg carbon/m2 livingMicrobeN - Nitrogen in living microbial biomass - kg nitrogen/m2 Model Input Data: FluxTower_AvgSoilT.csv: Average daily soil temperature (oC) at 10 cm depth at University of Illinois Urbana-Champaign (UIUC) Energy Farm flux tower from 7/2008-3/2016. (One year of averaged data) Model Input Data: FluxTower_AvgSoilVWC.csv: Average daily soil volumetric water content (VWC) at 10 cm depth at UIUC Energy Farm flux tower from 7/2008-3/2016. (One year of averaged data) Model Input Data: input_CCS_LIDET Study.csv: This file has daily data to run FUN-BioCROP (Column - Description - Units): yr - calendar year - year doy - day of year (1 to 365) (no leap year) - day anpp - aboveground NPP (DayCent) - kg C/m2/day bnpp - belowground NPP (DayCent) - kg C/m2/day aglivc - live aboveground biomass carbon (DayCent) - kg C/m2 bglivcj - live juvenile fine root biomass carbon (DayCent) - kg C/m2 bglivcm - live mature fine root biomass carbon (DayCent) - kg C/m2 aglivn - live aboveground biomass nitrogen (DayCent) - kg N/m2 bglivnj - live juvenile fine root biomass nitrogen (DayCent) - kg N/m2 bglivnm - live mature fine root biomass nitrogen (DayCent) - kg N/m2 nyr - simulation year - year cult - indicates a cultivation event (0 or 1) crop - indicates a new crop (0 or 1) fert - indicates a fertilizer event (0 or 1) frst - indicates the first day of the growing season (0 or 1) harv - indicates a harvest event (0 or 1) last - indicates the end of the growing season (0 or 1) croptype - crop type (0=none; 1=alfalfa; 2=corn; 3=grass clover pasture; 4=soybean; 5=wheat) cropsrl - crop specific root length - mm/g root cultrhizmix - fraction of rhizosphere mixed with bulk soil during cultivation (0.0-1.0) - fraction cultlitmix - fraction of litter mixed with bulk soil during cultivation (0.0-1.0) - fraction harvremov - fraction of above ground biomass removed during harvest (0.0-1.0) - fraction fertamt - fertilization amount - g N/m2 lifehist - plant life history (0 = annual, 1 = perennial) froot_turnover_c - amount of C in fine root turnover - kg C/m2 froot_turnover_n - amount of N in fine root turnover - kg N/m2 agrd_turnover_c - amount of C in aboveground biomass turnover - kg C/m2 agrd_turnover_n - amount of N in aboveground biomass turnover - kg N/m2 leaf_litter_fastfrac - Fast decomposing fraction of leaf litter (0.0-1.0) - fraction root_litter_fastfrac - Fast decomposing fraction of root litter (0.0-1.0) - fraction root_diameter - root diameter - mm root_length - root length - mm root/m2 rhizo_frac - fraction of total soil volume that is rhizosphere (0.0 - 1.0) - fraction date - date in format YYYY-MM-DD Instructions: Save the model code ("FUN-BioCROP_LIDET Study.Rmd") and accompanything files (data streams and CORPSE function code) in the same folder. In model code "Chunk 3: Load CORPSE Data Streams" set the working directory (setwd) to the folder with the files saved in step #1. In "Chunk 5: Define LIDET parameter sets" select the litter decomposition parameter set to be used in the run, and comment out all other sets. If changing any parameter values, edit them in "Chunk 6: Load parameters." Run all chunks up to and including "Chunk 10: Prepare Data for Export." In "Chunk 11: Export Output Data" edit data frames for export and filenames, as necessary. "Chunk 12: Graph Total Soil C" makes a figure of C remaining over the model run period. Description of each model chunk (in file FUN-BioCROP_LIDET Study.Rmd): Chunk 1: Remove all functions, clear memory. Removes all functions from R environment, clears the memory. Chunk 2: Load Packages. Loads packages necessary to run the code. Chunk 3: Load CORPSE Data Streams. Sets the working directory and loads the data files necessary to run CORPSE. Chunk 4: Load CORPSE Functions. Loads the R script with CORPSE functions from the working directory, "CORPSE Functions_Bioenergy_V2.R". Chunk 5: Define LIDET parameter sets. Has ten different parameter sets for litter decomposition tested in this study: Baseline parameters, LIDET parameters, and the other 8 best performing parameter sets identified in the modified Monte Carlo. To run the model, all but one parameter set must be commented out. Chunk 6: Load Parameters. Loads all fixed parameters to run the model. Data frame with definitions of parameters is in the CORPSE function script "CORPSE Functions_Bioenergy_V2.R" Chunk 7: Prepare Data Streams. Takes data streams loaded in Chunk 3 and puts them in the format necessary to run the model. The model is coded to run at least two sites at a time, so if only one site is being run it must be run in duplicate. Individual data tables of daily values are created in this chunk from the input data file. Chunk 8: Set Initial Conditions. Creates data tables of soil C and N pools for each soil compartment (rhizo_till, rhizo, bulk_till, bulk, litter) and loads initial values into the data tables. Creates lists for each soil compartment to hold model output. Chunk 9: Load FUN Data and Set Up Matrices. Uses DayCent data to calculate FUN input data: root and leaf N demand, total N demand, plant CN, leaf N available for retranslocation, and litter production. Creates matrices for FUN model outputs. Chunk 10: Run Model. Runs the model. Chunk 11: Prepare Data for Export. Combines data from each day saved as lists into data frames for each soil compartment. Adds values from all soil compartments together to calculate total soil values, creates separate data frames for each soil C and N pool (e.g., protected slow C) for the total soil value. Adds different C and N pools together to calculate total soil C and N for all layers. Creates data frame of ratio of protected to unprotected SOC. Organizes FUN data for export. Chunk 12: Export Results. Exports CSV files of model results to the working directory. Chunk 13: Graph Total Soil C. Makes figure of C remaining over time. Related Links: Original FUN-BioCROP model: https://github.com/BrzostekEcologyLab/FUN-BioCROP LIDET dataset: https://andlter.forestry.oregonstate.edu/data/abstract.aspx?dbcode=TD023

Juice, Stephanie↗
NASA NTRS1979

The 25 kW power module evolution study. Part 3: Conceptual designs for power module evolutions. Volume 3: Cost estimates

Cost data generated for the evolutionary power module concepts selected are reported. The initial acquisition costs (design, development, and protoflight unit test costs) were defined and modeled for the baseline 25 kW power module configurations. By building a parametric model of this initial building block, the cost of the 50 kW and the 100 kW power modules were derived by defining only their configuration and programmatic differences from the 25 kW baseline module. Variations in cost for the quantities needed to fulfill the mission scenarios were derived by applying appropriate learning curves.

Source record↗