Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “membrane separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A low-cost sulfate-based all iron redox flow battery

Redox flow batteries (RFBs) are promising choices for stationary electric energy storage. Nevertheless, commercialization is impeded by high-cost electrolyte and membrane materials. Here, we report a low-cost all-iron RFB that features inexpensive FeSO 4 electrolytes, microporous membrane along with a glass fiber separator. The addition of 0.1 м 1-ethyl-3-methylimidazolium chloride (EMIC) overcomes the low solubility of FeSO 4 in water which is raised to 2.2 м. DFT calculations demonstrate that EMI + can strengthen the interaction between sulfate anions and water molecules. This electrolyte composition also allows both anode and cathode reactions to operate without actively maintaining a pH gradient between them, thus eliminating the need for expensive ion exchange membranes. The all-iron RFB demonstrates stable operation at a current density of 20 mA cm –2 for more than 800 cycles via a simple, periodic regeneration process. Furthermore, the system cost of FeSO 4 /EMIC RFBs is projected to be $ 50 per kWh due to its low-cost active materials and the inexpensive microporous membrane. Finally, this low-cost, high-concentration all-iron RFB is a promising stationary energy–storage system for storing renewable energy.

25 ENERGY STORAGE↗
DOE OSTI2023

A New Simultaneous Membrane Thickness and Catalyst Loading Measurement for Fuel Cell Proton-Exchange Assemblies by $\mathrm{IR}$ Transmission

Here, we present a study of mid-infrared (mid-IR) transmission through typical proton-exchange fuel cell and water electrolyzer catalyst-coated membrane materials, and the determination of membrane layer thickness, and catalyst layer loading, from the power of the transmitted beam. Measured membrane thicknesses lay in the range of 25-125 um, and catalyst areal loadings range from 0.05 to 0.35 mg/cm 2 . We show that the transmission spectrum correlated to membrane thickness and catalyst loading values separately, and also used a mathematical model to calculate both quantities simultaneously, from a single measurement of transmission. Measurements were carried out using a Fourier-transform infrared (FTIR) spectrometer, in specular transmission mode, in the wavelength range of 3-13 um (3333-770 cm -1 ). We discuss the potential application of this method to the development of roll-to-roll manufacturing full-area-scanning quality inspection of catalyst-coated membrane (CCM) materials.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

RECLAIM: Electrochemical Lithium and Nickel Extraction with Concurrent Carbon Dioxide Mineralization

This project aims to develop technologies toward the production of Li and Ni from CO 2 -reactive minerals and rocks that contain Ca and Mg, while sequestering CO 2 . The technologies include acoustic stimulation and electrolytic proton production, which use electricity to liberate valuable metal ions from the surrounding mineral matrix at sub-boiling temperatures (~20-80°C). Feedstocks include Li/Ni/Ca/Mg-rich igneous and sedimentary rocks and minerals such as holmquistite, hectorite, lateritic Ni ores enriched in Mg-rich serpentine. Other examples of feedstocks that could be used include coarse grained orthocumulate, mine tailings, etc. In the first step, the electrolytic breakdown of water to H + and OH – (as well as O 2 and H 2 ) will be induced by applying an electric potential to simultaneously produce acidity and alkalinity. The solid feedstocks will be dissolved in the acidic anolyte under acoustic stimulation. Solubilized species will then undergo separation using our unique Li + -selective membranes driven by electrodialysis, leading to concentration of Li as soluble lithium silicate, from which Li 2 CO 3 can be derived by reaction with CO 2(g) while supplying cathode alkalinity. Also at the cathode, stepwise electrolytic precipitation of metal hydroxides, including Ni(OH) 2 , Ca(OH) 2 , and Mg(OH) 2 is performed along a cascade reactor in which both the applied potential and pH increase downstream, thereby simultaneously extracting and separating the metals. Finally, exposure of Ca(OH) 2 and Mg(OH) 2 to dilute CO 2 will result in CO 2 uptake in the form of Ca and Mg carbonates. The primary accomplishments include sample procurement and characterization. Progress has been made on precursor identification and mapping, establishing protocols for assessing metal extractability under sonication, and preliminary technoeconomic analysis (TEA) and life cycle analysis (LCA).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhanced, continuous, liquid-liquid extraction and in-situ separation of volatile fatty acids from fermentation broth

In 2018 alone, the US landfilled 35.3 million tons of food waste, about 24% of the total landfilled mass. In addition to the negative impacts landfills have demonstrated on the environment and human health, some states have begun to outlaw or dissuade the disposal of food waste and sewage sludge into landfills altogether. An urgent need has thus been created for the development of digestion processes like anaerobic digestion (AD) and arrested methanogenesis (AM) to convert food waste into valuable chemical products. Unfortunately, the buildup of volatile fatty acids (VFAs) during these processes eventually halts the reaction, and energy efficient methodologies for VFA removal are critical for the operation of fermenters. Additionally, VFAs themselves can serve as valuable chemical precursors, and recently AD processes have been modified to increase VFA production during fermentation. However, even with significant research over the past three decades, the separation of VFAs from the fermenter broth has remained expensive. Moreover, the separation of these VFAs from the fermenter broth may cost up to 50% of the entire process budget, hindering the widespread commercial adoption of AD and AM. Here we present a novel liquid-liquid extraction process termed CLEANS (Continuous Liquid-liquid Extraction And iN-situ Separation) as a highly efficient method for continuously separating VFAs from a real fermentation broth solely under gravity. Our optimized process (using an aqueous broth feed pH of 2.5, tri-noctylamine as an extractant, and a 10:1 ratio of aqueous broth to organic extractant), achieved a VFA distribution constant K D = 44.5 ± 7.9, a single-pass recovery = 81.3 ± 2.5%, and an extraction factor = 8.1 ± 0.3. These KD values are over an order of magnitude higher than what has been previously reported for comparable processes. A high aqueous-to-organic flowrate ratio, enabled for the first time by CLEANS, was found to be particularly crucial for achieving optimal extraction. Our separation process demonstrates excellent reproducibility and potential for scalability. The economic and environmental implications of this work are briefly discussed.

42 ENGINEERING↗
DOE OSTI2021

Mixed matrix membranes for post-combustion carbon capture: From materials design to membrane engineering

Mixed matrix materials (MMMs) containing nanofillers dispersed in continuous polymer matrices have emerged as an exciting and versatile platform to develop membranes with superior CO 2 /N 2 separation performance for post-combustion carbon capture. Both polymers and nanofillers can be vertically designed and engineered to combine the advantages of excellent processability (derived from polymers) and strong size-sieving ability or/and significant permanent porosity (originated from nanofillers). However, the MMMs face major challenges, such as interfacial incompatibility, particle agglomeration, and poor thin-film formability. This report provides a comprehensive yet critical review of various polymers and nanofillers (such as metal-organic frameworks, covalent organic frameworks, and two-dimensional materials) with promising CO 2 /N 2 separation properties. We exhaustively describe strategies to improve interfacial compatibility, such as in situ syntheses of polymers and nanofillers and functionalization of both components to improve adhesion. Moreover, we highlight various approaches to engineer the MMMs into thin-film composite (TFC) membranes. The review reveals the structure/property relationship in these MMMs and outlines the challenges and opportunities to realize their potential for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen Crossover Flux through Two-Dimensional Nanomaterials

Energy storage and conversion devices require an ion-exchange membrane with high transmission of charge-balancing ions and separation of anode and cathode electrolytes/gases. This ensures optimum device performance. Most conventional membranes suffer huge cross-permeation resulting in low energy efficiency and material degradation. This work investigated hydrogen permeability and proton transmission through membrane electrode assemblies (MEAs) containing a monolayer of hexagonal boron nitride and single-layer and bi-layer graphene in a gas-phase small-scale cell and a liquid cell. Here we found that the hydrogen crossover flux through MEAs with 2D materials was inhibited by at least a factor of 5 compared to the one without. Single-layer graphene and boron nitride enabled high proton transmission, but bi-layer graphene inhibited proton conduction. Defect visualization of 2D materials revealed few atomic-scale defects in graphene. These findings suggest that a monolayer of 2D material may provide good selectivity for energy conversion and storage devices by blocking species crossover while allowing high proton transmission.

2D materials↗
DOE OSTI2022

Using Al 3+ to Tailor Graphene Oxide Nanochannels: Impact on Membrane Stability and Permeability

Graphene oxide (GO) membranes, which form from the lamination of GO sheets, attract much attention due to their unique nanochannels. There is much interest in controlling the nanochannel structures and improving the aqueous stability of GO membranes so they can be effectively used in separation and filtration applications. This study employed a simple yet effective method of introducing trivalent aluminum cations to a GO sheet solution through the oxidation of aluminum foil, which modifies the nanochannels in the self-assembled GO membrane by increasing the inter-sheet distance while decreasing intra-sheet spacing. The Al 3+ modification resulted in an increase in membrane stability in water, methanol, ethanol, and propanol, yet decreased membrane permeability to water and propanol. These changes were attributed to strong interactions between Al 3+ and the membrane oxygenated functional groups, which resulted in an increase in membrane hydrophobicity and a decrease in the intra-sheet spacing as supported by surface tension, contact angle, atomic force microscopy, and X-ray photoelectron spectroscopy measurements. Our approach for forming Al 3+ modified GO membranes provides a method for improving the aqueous stability and tailoring the permeation selectivity of GO membranes, which have the potential to be implemented in vapor separation and fuel purification applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic Membrane Reactors Based on Carbon Molecular Sieve Hollow Fiber Membranes for Sustainable and Modular H 2 Production

We aimed to develop a catalytic membrane reactor (CMR) that couples water–gas shift (WGS) reaction with in-situ H 2 separation to produce blue H 2 and a CO 2 -rich stream from coal- and biomass-derived syngas. Our core approach employs high-permeance carbon molecular sieve (CMS) hollow-fiber membranes (HFMs) with strong gas separation ability, which we further integrate into catalytic membrane reactors to intensify H 2 production and CO 2 capture in a single unit. Three organizations with complementary skills collaborated to achieve the goal, including the University at Buffalo (UB), Los Alamos National Laboratory (LANL), and Trimeric Corporation (Trimeric).

08 HYDROGEN↗
DOE OSTI2020

NH 4 OH Looping with Membrane CO 2 Absorber and Distributed Stripper for Enhanced Algae Growth

The University of Kentucky Center for Applied Energy (UK CAER) has devised a unique, integrated CO2 capture and utilization technology. CO2 from coal-fired power generation flue gas is first captured at half the operating cost of a typical aqueous CO2 capture system (CCS), distributed in an aqueous stream and then fixed by algae in bioreactors where the algae production is increased by 50% over that with a typical intermittent nutrient feeding system. Lower CCS operating cost is achieved by eliminating the flue gas pretreatment step for cooling and SO2 removal, eliminating steam extraction from the power generation steam cycle for solvent regeneration, and eliminating CO2 compression. Higher algae production is achieved by continuous, just-in-time nutrient feed to the bioreactors directly from a distributed solvent regenerator, which maintains the bioreactor pH for optimum growth. The process starts with a uniquely configured membrane absorber, where the flue gas is indirectly contacted with an ammonium hydroxide (NH4OH) solvent. Dissolved NH3 is attractive for both CO2 capture and as an algae nutrient. For CO2 capture it is inexpensive, has a low regeneration energy, is thermally- and oxidatively-stable and has a viscosity near that of water, which makes is easy to transport. Numerous studies have shown that the scrubbing capacity of NH3 is approximately 0.9-1.2 kg of CO2/kg of NH3, with a CO2 removal efficiency of ~99% and half the solvent regeneration energy than that of 30 wt% MEA[1, 2, 3]. NH3 is attractive as an algae nutrient due to its low cost. The rich NH4OH solvent is pumped to a set of distributed regenerators which are co-located with the algae bioreactors. Solvent pumping, transport and distribution reduces the balance of plant (BOP) cost compared to a typical aqueous CCS related to the flue gas duct and boost fan required to transport the flue gas. The energy required for the distributed solvent regeneration is supplied by solar-thermal panels eliminating the need for steam extraction from the power generation steam cycle. After solvent regeneration, the product stream contains both the CO2 captured from the flue gas and volatized NH3 from the solvent. This product stream is fed directly to the bioreactors, eliminating the need for compression of the CO2 stream. The relative amounts of CO2 and NH3 in the product stream are adjusted and controlled by a controlling the regeneration conditions (pressure and temperature). The continuous feed of the right ratio of nutrients overcomes the typical inhibition of algae growth resulting from frequent pH swings in the bioreactor due to unbalanced (intermittent) feeding systems for CO2 and N. Also, because the regenerators will operate at pressure and be located in close proximity to the bioreactors, there is no worry about pressure drop when sparging the gas into the algae. Sparging produces small bubbles which is beneficial for mass transfer efficiency. One known challenge when using an NH4OH solvent is high NH3 emission. Hydrophobic membranes are used for CO2 capture using an aqueous NH3 solution[4, 5] without the direct contact between flue gas and aqueous solution. Additionally, UK CAER CO2 capture and utilization process manages NH3 slip in three extra measures. First, NH3 slip is minimized by working with minimal species partial pressure, which is proportional to the concentration in the liquid. Hence, lowering the capture solvent concentration will lower the NH3 partial pressure. Second, UK CAER’s previous work has demonstrated that the addition of Zn2+ into NH3 solutions to chelate the NH3 can reduce NH3 volatility. Third, the configuration of the membrane CO2 absorber utilizes condensed water from the flue gas to continually wash the gas-side of the membrane to reduce fouling and recapture NH3 slip. Additional details about the UK CAER unique, integrated CO2 capture and utilization technology will be presented along with technology development plans. Diao, N., Q. Li, and Z. Fang. 2004. Heat transfer in ground heat exchangers with groundwater advection. International Journal of Thermal Sciences. 43: 1203-1211, He, Q., M. Chen, L. Meng, K. Liu, and W. Pan. 2004. Study on Carbon Dioxide Removal from Flue Gas by Absorption of Aqueous Ammonia. Western Kentucky University. Yeh, A.C., and H. Bai. 1999. Comparison of ammonia and monoethanolamine solvents to reduce CO2 greenhouse gas emissions. The Science of the Total Environment. 228: 121-133, Villeneuve, K., D. Roizard, J.C. Remigy, M. Iacono, and S. Rode. 2018. CO2 capture by aqueous ammonia with hollow fiber membrane contactors: Gas phase reactions and performance stability. Separation and Purification Technology, 199: 189-197, Toro Molina, C., and C. Bouallou. 2016. Carbon dioxide absorption by ammonia intensified with membrane contactors. Clean Techn Environ Policy 18, 2133–2146 (2016)

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

High-performance multiblock PEMs containing a highly acidic fluorinated-hydrophilic domain for water electrolysis

The present paper describes the design and evaluation of novel hydrophilic–hydrophobic poly(arylene ether sulfone) (PAES) multiblock copolymers for their synergistic effects upon transport properties and their potential use in proton exchange membrane water electrolysis. The multiblock copolymers are prepared via a coupling reaction between (i) a hydrophilic segment consisting of a disulfonated quinone fluorinated biphenyl group that contains fluorine moieties next to the sulfonated groups to increase the acidity, and (ii) hydrophobic segments composed of non-sulfonated biphenyl sulfone to provide dimensional stability. Two different lengths (molecular weights; 5k and 10k, where k represents 10 3 g mol -1 ) of hydrophobic segments are used to investigate the effects of the membrane properties compared with those of Nafion® and PAES random copolymer (i.e., BPSH40). Atomic force microscopy images of the BPSH40 and multiblock membranes are shown to agree closely with a mesoscale simulation, thus confirming the importance of the morphological effect upon the transport properties. Furthermore, the multiblock copolymer with a higher proportion of hydrophilic segments (10 k–5k) was shown to provide enhanced performance (3.41 A cm -2 at 1.9 V) compared to the multiblock copolymer with equal proportions of hydrophilic and hydrophobic segments (10 k–10 k) due to the greater continuity of nano-sized ionic channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗
DOE OSTI2022

Ultrafast and selective gas transport through highly ordered black phosphorene nanochannels

Two-dimensional (2D) materials bring a great opportunity to fabricate molecular sieving membranes that can potentially break the permeability-selectivity trade-off. Although 2D laminar membranes with interlayer nanochannels as molecular sieving channel were widely studied, for most of reported 2D laminar membranes, it is of a great challenge to fabricate highly ordered interlayer nanochannels for mass transport. Herein, we report a novel kind of black phosphorene membrane which is made from the stacking of highly ordered 2D black phosphorene nanoflakes. The as prepared black phosphorene membrane shows H 2 permeance > 1000 GPU and H 2 /CO 2 selectivity > 100 for H 2 /CO 2 mixed gas, demonstrating an extremely high gas separation performance. The DFT calculation results demonstrate that the interlayer galleries in the black phosphorene membrane allow the H 2 passing through easily while block the other gases with bigger kinetic diameters, matching well with the experimental findings. In conclusion, the present results indicate that the interlayer galleries in the black phosphorene membrane can be applied as molecular sieving channels for gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Carbon‐negative hydrogen from ethanol via catalytic oxidative reforming

Abstract This study evaluated a commercial technology for producing low‐ or negative‐carbon hydrogen through ethanol catalytic oxidative reforming, focusing on the life cycle greenhouse gas emissions, or carbon intensity (CI). Various scenarios were analyzed: (a) comparing corn ethanol (first‐generation or Gen1 ethanol) and cellulosic ethanol (second‐generation or Gen2 ethanol) as feedstocks; (b) assessing carbon capture and sequestration (CCS) for CO 2 from upstream fermentation; and (c) evaluating oxygen sourcing via air separation units vs. on‐site or off‐site water electrolysis using a proton exchange membrane. Findings indicate that the CI for hydrogen production using Gen2 ethanol from corn stover is lower than that of Gen1 corn ethanol. Additionally, using proton exchange membrane‐generated oxygen results in a lower CI than air separation unit‐generated oxygen, regardless of the sourcing method. Implementing CCS for the hydrogen production plant's evolved CO 2 is essential for achieving a net‐negative CI for hydrogen from Gen1 ethanol. All examined scenarios, including both ethanol generations, oxygen sources, and CCS applications, demonstrated a net‐negative carbon intensity, surpassing the life cycle greenhouse gas emissions threshold of 0.45 kg CO 2 e/kg to enable policy credits as outlined in the Inflation Reduction Act §45V. In comparison, the CI for hydrogen from steam methane reforming stands at 3.4 kg CO 2 e/kg with CCS and 9.4 kg CO 2 e/kg without CCS.

08 HYDROGEN↗
DOE OSTI2021

Mechanically robust hydrophobized double network hydrogels and their fundamental salt transport properties

Abstract Water swollen polymer networks are attractive for applications ranging from tissue regeneration to water purification. For water purification, charged polymers provide excellent ion separation properties. However, many ion exchange membranes (IEMs) are brittle, necessitating the use of thick support materials that ultimately decrease throughput. To this end, novel double network hydrogels (DNHs) with variable water content are prepared and characterized in terms of mechanical and ion transport properties to evaluate their potential utility as tough membrane materials. The first network contains fixed anionic charges, while the other is comprised of a copolymer with varied ratios of hydrophobic ethyl acrylate (EA) and hydrophilic dimethyl acrylamide (DMA) repeat units. Characterization of freestanding DNH films reveals a reduction in water content from 88 to 53 wt% and a simultaneous increase in ultimate stress and strain by ~3.5× and ~4.5×, respectively, for 95%/5% EA/DMA, relative to 100% DMA. Fundamental salt transport properties relevant to water purification, including permeability, solubility, and diffusivity, are measured and systematically compared with conventional membrane materials to inform the development of DNHs for membrane applications. The ability to simultaneously reduce water content and increase mechanical integrity highlights the potential of DNHs as a synthetic platform for future membrane applications.

Allen, Marshall J.↗
DOE OSTI2020

Large-area nanostructured surfaces with tunable zeta potentials

Through a refined fabrication protocol based on block-copolymer self-assembly we synthesize nanostructured surfaces with conical nanopillars of different height (60, 120, and 200 nm) in hexagonal arrays with uniform spacing (~50 nm) over large areas (>cm 2 ). While the nanostructured surfaces fabricated on silicon substrates display superhydrophilic behavior, superhydrophobic properties are attained by coating with octadecyltrichlorosilane (OTS). Negative zeta potentials for all the studied surfaces are reported by electrokinetic flow measurements with aqueous KCl solutions at different concentrations (1 and 10 mM) and pH values between 4 and 8. While the surface nanostructure reduces the zeta potential magnitude, the hydrophobic OTS coating enhances it. Experimental results can be accounted for by a site-dissociation model for the surface charge density. The reported wetting properties and zeta potential tunability makes the studied surfaces particularly relevant for applications such as energy conversion and storage, membrane-based water treatment and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Effects of ion adsorption on graphene oxide films and interfacial water structure: A molecular-scale description

Herein we discuss graphene oxide as a promising, emerging separation material, as it is durable, dispersible in water, and has naturally forming functional groups. Bulk studies using graphene oxide flakes have demonstrated impressive metal adsorption. However, little interfacial information about water and metal organization near graphene oxide is available. A mechanistic understanding of water and ions interactions with graphene oxide films is critical toward advanced separations, including improved sorption efficiency and membrane regeneration. We study metal ion and local water organization near graphene oxide thin films formed at the air/water interface. These films are not typical membranes and allow us to determine nanoscale information about the graphene oxide-water interface. We accomplish this with x-ray reflectivity (XR), x-ray fluorescence near total reflection (XFNTR), and vibrational sum frequency generation spectroscopy (SFG). These interface-specific techniques provide the electron density profile normal to the interface, number of adsorbed ions, and information about the orientational ordering and hydrogen-bonding network of interfacial water, respectively. Via XFNTR and SFG, we find that trivalent yttrium ions preferentially adsorb to graphene oxide and affect its structure, compared to divalent strontium and monovalent cesium ions. Two different interfacial water populations can be described, based on their hydrogen bonding strength, and the adsorbed ions affect these populations differently. These results provide fundamental information about ion and water organization at the interface and help address the large computational-experimental agreement gap for graphene oxide systems. Additionally, they are relevant for improved soft-scaffold graphene oxide membranes and downstream applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Gas transport characteristics of supramolecular networks of metal-coordinated highly branched Poly(ethylene oxide)

Model systems are developed and investigated to better understand the effect of polyether-metal ion interactions on gas separation characteristics. These systems help answer current questions raised by the substantial body of research on metal-organic frameworks (MOFs) dispersed in polyethers to improve gas separation performance, where favorable interactions between the metal centers and polyethers are preferred to improve interfacial compatibility. Specifically, we investigate CO 2 /gas transport properties of supramolecular networks comprising cross-linked poly(ethylene oxide) (XLPEO) and dissociable salts, including LiClO 4 , Ni(BF 4 ) 2 , and Cu(BF 4 ) 2 . Increasing the salt content increases the glass transition temperature (T g ) and generally decreases gas diffusivity and permeability, which can be successfully described using a T g -integrated free volume model with an expression similar to the Vogel-Tammann-Fulcher (VTF) equation. Surprisingly, low loadings of LiClO 4 and Cu(BF 4 ) 2 (2 mass% or less) can increase gas permeability by 30%–70% without affecting the CO 2 /gas selectivity. This increase correlates with polyether-metal ion dynamics as measured by dielectric spectroscopy. Understanding how interaction-mediated dynamics affect gas transport will be instrumental to designing MOF-based mixed matrix materials for gas separations.

36 MATERIALS SCIENCE↗