Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “measurement data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Radar prediction of absolute rain fade distributions for earth-satellite paths and general methods for extrapolation of fade statistics to other locations

The first absolute rain fade distribution method described establishes absolute fade statistics at a given site by means of a sampled radar data base. The second method extrapolates absolute fade statistics from one location to another, given simultaneously measured fade and rain rate statistics at the former. Both methods employ similar conditional fade statistic concepts and long term rain rate distributions. Probability deviations in the 2-19% range, with an 11% average, were obtained upon comparison of measured and predicted levels at given attenuations. The extrapolation of fade distributions to other locations at 28 GHz showed very good agreement with measured data at three sites located in the continental temperate region.

Goldhirsh, J.↗
NASA NTRS1984

Space shuttle flying qualities criteria assessment, phase 3

The crucial flight data measurement and reduction techniques required for the experimental approach are explored. An overview of available flight data is presented, identification of the effective augmented vehicle and pilot models determined, a summary of flight data problems compiled, and further recommendations for the Orbiter Flying Qualities (OFQ) experiment provided.

Myers, T. T.↗
NASA NTRS1984

Body-freedom flutter of a 1/2-scale forward-swept-wing model, an experimental and analytical study

The aeroelastic phenomenon known as body-freedom flutter (BFF), a dynamic instability involving aircraft-pitch and wing-bending motions which, though rarely experienced on conventional vehicles, is characteristic of forward swept wing (FSW) aircraft was investigated. Testing was conducted in the Langley transonic dynamics tunnel on a flying, cable-mounted, 1/2-scale model of a FSW configuration with and without relaxed static stability (RSS). The BFF instability boundaries were found to occur at significantly lower airspeeds than those associated with aeroelastic wing divergence on the same model. For those cases with RSS, a canard-based stability augmentation system (SAS) was incorporated in the model. This SAS was designed using aerodynamic data measured during a preliminary tunnel test in which the model was attached to a force balance. Data from the subsequent flutter test indicated that BFF speed was not dependent on open-loop static margin but, rather, on the equivalent closed-loop dynamics provided by the SAS. Servo-aeroelastic stability analyses of the flying model were performed using a computer code known as SEAL and predicted the onset of BFF reasonably well.

Chipman, R.↗
NASA NTRS1986

Determination of cloud microphysical properties by laser backscattering and extinction measurements

The extinction and backscattering of 514 nm laser radiation in polydisperse water droplet clouds was studied in the laboratory. Three cloud size distributions with modal diameters of 0.02, 5.0, and 12.0 microns were investigated. The relationships between the cloud optical parameters (attentuation coefficient, sigma and volume backscattering coefficient, Beta (sub pi)) and the cloud water content, C, were measured for each size distribution. It was found that a linear relationship exists between sigma and C and between beta (sub pi) and C for cloud water content values up to 3gm/cubic m. The linear relationships obtained, however, have slopes which depend on the droplet size distribution. For a given water content both sigma and beta (sub pi) increase as the modal diameter decreases. The measured data are compared with existing theoretical analyses and discussed in terms of thie application to lidar measurements of atmospheric clouds. It is concluded that the empirical information obtained can serve as a basis for quantitative lidar measurements.

Dubinsky, R. N.↗
NASA NTRS1998

Rocketdyne Advanced Reusable Technologies Program Update

NASA Marshall Space Flight Center Advanced Reusable Technologies/Rocket Based Combined Cycle (RBCC) program has enabled: (1) the creation of unique trajectory simulation facility; (2) development of basic operability and performance data; (3) results to date: (a) rocket thrusters performing as designed (P(sub c), MR, q, etc); (b) AAR performance data measured at M = 0 and 3; (c) rocket mode performance at simulated vacuum conditions; and (d) data reduction in progress; (4) completing testing; M = 0, 3 and trajectory M = 3 to 3.7; and (5) next logical steps: build flight type engine and flight demonstrate RBCC.

Ratekin, Gary↗
NASA NTRS1999

Acoustic Treatment Design Scaling Methods: Overview, Results, and Recommendations - Volume 1

Scale model fan rigs that simulate new generation ultra-high-bypass engines at about 1/5-scale are achieving increased importance as development vehicles for the design of low-noise aircraft engines. Testing at small scale allows the tests to be performed in existing anechoic wind tunnels, which provides an accurate simulation of the important effects of aircraft forward motion on the noise generation. The ability to design, build, and test miniaturized acoustic treatment panels on scale model fan rigs representative of the fullscale engine provides not only a cost-savings, but an opportunity to optimize the treatment by allowing tests of different designs. The primary objective of this study was to develop methods that will allow scale model fan rigs to be successfully used as acoustic treatment design tools. The study focuses on finding methods to extend the upper limit of the frequency range of impedance prediction models and acoustic impedance measurement methods for subscale treatment liner designs, and confirm the predictions by correlation with measured data. This phase of the program had as a goal doubling the upper limit of impedance measurement from 6 kHz to 12 kHz. The program utilizes combined analytical and experimental methods to achieve the objectives.

Kraft, R. E.↗
NASA NTRS2010

Broadband Fan Noise Prediction System for Turbofan Engines: Setup_BFaNS User's Manual and Developer's Guide - Volume 1

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the first volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User's Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running Setup_BFaNS. It concludes with technical documentation of the Setup_BFaNS computer program.

Morin, Bruce L.↗
NASA NTRS2010

Broadband Fan Noise Prediction System for Turbofan Engines: BFaNS User's Manual and Developer's Guide - Volume 2

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the second volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running BFaNS. It concludes with technical documentation of the BFaNS computer program.

Morin, Bruce L.↗
NASA NTRS2010

Broadband Fan Noise Prediction System for Turbofan Engines: Validation and Test Cases - Volume 3

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the third volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by validation studies that were done on three fan rigs. It concludes with recommended improvements and additional studies for BFaNS.

Morin, Bruce L.↗
DOE OSTI2025

Kinetic Deep Learning v0.1

Here, we present a method that uses protein levels to predict times series of metabolite concentrations. Understanding this type of pathway dynamics is important in order to predict the behavior of the pathway and, more pragmatically, to be able to design biological systems (such as strains bioengineered to produce chemical products) reliably. Typically, for this purpose, kinetic models consisting of differential equations based on the Michaelis-Menten dynamics have been used in the past. However, these methods can rarely produce good fits to measured data time series. Possibly, this happens because the kinetic constants are unknown or are different from the ones measured in vivo, or perhaps because Michaelis-Menten dynamics is not a satisfactory description. In order to improve the predictive nature of these kinetic models we have eliminated the Michaelis-Menten description of pathway dynamics and we have substituted it by algorithms that automatically learn these dynamics from previously obtained metabolomics and proteomics data using machine learning approaches. Specifically, kinetic deep learning uses deep learning to map proteomics time series to metabolite concentration time series, instead of learning the first metabolite derivative and integrating in (as in the first version of kinetic learning). This approach is shown to provide good to excellent results with a data set specifically collected for this purpose.

Garcia Martin, Hector [Joint BioEnergy Institute (↗
DOE OSTI2022

The importance of phonon spectrum measurements for accurate prediction of thermal scattering laws [Slides]

Although approximate phonon spectra (e.g. Debye model) are sufficient to reproduce integral quantities (e.g. total INS cross section) in reasonable agreement with the measured data, more accurate phonon spectra are needed to achieve agreement with the differential data. SANS component is essential for reproducing the total scattering cross section; this is the case for nanodiamonds and other materials where SANS components are present (such as porous materials like nuclear graphite). A format proposal for SANS data in ENDF or GNDS is needed. Therefore, differential (e.g. phonon spectrum) and integral (e.g. total cross section) measurements are necessary in the process of creating an ENDF evaluation. We have successfully developed a method by which ENDF evaluations can be directly compared to the relevant experimentally measured quantities. INS experiments at SNS, ILL, ISIS, and, in the future, ESS, as well as total cross section measurements at the VESUVIO instrument at ISIS, are accessible through user programs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRSDate not supplied

Treating gridded geospatial data as point data to simplify analytics

Gridded geospatial remote sensing (satellite) data has traditionally been stored in file-based multidimensional arrays to preserve the locality of data. Measurements from locations that are physically next to each other on earth remain next to each other in the arrays. Maintaining this locality is useful when running calculations like reprojection, but unnecessary for many other calculations. This talk will go through a real world example of a tool redesign at the Goddard Earth Sciences Data and Information Services Center (GES DISC), showing the advantages of using the data frame model for calculating summary statistics, where measurement proximity is unimportant.

Analysis-ready data↗
NASA NTRS2017

Characterization of a Method for Inverse Heat Conduction Using Real and Simulated Thermocouple Data

It is often impractical to instrument the external surface of high-speed vehicles due to the aerothermodynamic heating. Temperatures can instead be measured internal to the structure using embedded thermocouples, and direct and inverse methods can then be used to estimate temperature and heat flux on the external surface. Two thermocouples embedded at different depths are required to solve direct and inverse problems, and filtering schemes are used to reduce noise in the measured data. Accuracy in the estimated surface temperature and heat flux is dependent on several factors. Factors include the thermocouple location through the thickness of a material, the sensitivity of the surface solution to the error in the specified location of the embedded thermocouples, and the sensitivity to the error in thermocouple data. The effect of these factors on solution accuracy is studied using the methodology discussed in the work of Pizzo, et. al.1 A numerical study is performed to determine if there is an optimal depth at which to embed one thermocouple through the thickness of a material assuming that a second thermocouple is installed on the back face. Solution accuracy will be discussed for a range of embedded thermocouple depths. Moreover, the sensitivity of the surface solution to (a) the error in the specified location of the embedded thermocouple and to (b) the error in the thermocouple data are quantified using numerical simulation, and the results are discussed.

Pizzo, Michelle E.↗
DOE OSTI2026

Inverse Mapping of the Collision Kernel and Wall Flux Scaling in a Tall Convection‐Cloud Chamber Using Local Sensors and Knowledge‐Informed Deep Learning

Droplet collision–coalescence is a crucial process in cloud physics, but accurately representing this process under different dynamical conditions remains challenging. A proposed future convective‐cloud chamber aims to investigate this key process, but the method for observing it remains unclear, even though it is theoretically established that collision‐coalescence will occur. This study serves as a proof‐of‐concept demonstration of how knowledge‐informed deep learning, combined with measurement data from local sensors in the chamber, can be used to estimate the collision kernels, which determine how the droplet size distribution evolves during collision‐coalescence. In addition to estimating the collision kernel, we also address wall fluxes, another uncertain but important process that acts as a source of heat and moisture in the chamber. Ensemble runs of large‐eddy simulations are conducted by scaling the wall fluxes and the collision kernel, while the measured flow and cloud properties are used as inputs for a neural network. Results indicate that this approach successfully maps the scaling of wall fluxes and the collision kernel with biases of approximately 1% or less relative to the range of the target data. This proof‐of‐concept lays the groundwork for future applications; when the real measurements are available, real sensor data combined with the trained model presented in this work will enable estimation of the actual wall fluxes and collision kernel.

cloud chamber↗
NASA NTRS1978

Variation of solar cell sensitivity and solar radiation on tilted surfaces

An empirical study was performed (1) to evaluate the validity of various insolation models used to compute solar radiation incident on tilted surfaces from global data measured on horizontal surfaces and (2) to determine the variation of solar cell sensitivity to solar radiation over a wide range of atmospheric condition. Evaluation of the insolation data indicates that the isotropic sky model of Liu and Jordan underestimates the amount of solar radiation falling on tilted surfaces by as much as 10%. An anisotropic-clear-sky model proposed by Temps and Coulson was also evaluated and found to be deficient under cloudy conditions. A new model, formulated herein, reduced the deviations between measured and predicted insolation to less than 3%. Evaluation of solar cell sensitivity data indicates small change (2-3%) in sensitivity from winter to summer for tilted cells. The feasibility of using such global data as a means for calibrating terrestrial solar cells as done by Treble is discussed.

Klucher, T. M.↗
DOE OSTI2021

Classification of orthostatic intolerance through data analytics

Imbalance in the autonomic nervous system can lead to orthostatic intolerance manifested by dizziness, lightheadedness, and a sudden loss of consciousness (syncope); these are common conditions, but they are challenging to diagnose correctly. Uncertainties about the triggering mechanisms and the underlying pathophysiology have led to variations in their classification. This study uses machine learning to categorize patients with orthostatic intolerance. Here we use random forest classification trees to identify a small number of markers in blood pressure, and heart rate time-series data measured during head-up tilt to (a) distinguish patients with a single pathology and (b) examine data from patients with a mixed pathophysiology. Next, we use Kmeans to cluster the markers representing the time-series data. We apply the proposed method analyzing clinical data from 186 subjects identified as control or suffering from one of four conditions: postural orthostatic tachycardia (POTS), cardioinhibition, vasodepression, and mixed cardioinhibition and vasodepression. Classification results confirm the use of supervised machine learning. We were able to categorize more than 95% of patients with a single condition and were able to subgroup all patients with mixed cardioinhibitory and vasodepressor syncope. Clustering results confirm the disease groups and identify two distinct subgroups within the control and mixed groups. The proposed study demonstrates how to use machine learning to discover structure in blood pressure and heart rate time-series data. The methodology is used in classification of patients with orthostatic intolerance. Diagnosing orthostatic intolerance is challenging, and full characterization of the pathophysiological mechanisms remains a topic of ongoing research. This study provides a step toward leveraging machine learning to assist clinicians and researchers in addressing these challenges.

60 APPLIED LIFE SCIENCES↗