Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Multi-Model Mean Nitrogen and Sulfur Deposition from the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP): Evaluation of Historical and Projected Future Changes

We present multi-model global datasets of nitrogen and sulfate deposition covering time periods from 1850 to 2100, calculated within the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP). The computed deposition fluxes are compared to surface wet deposition and ice core measurements.We use a new dataset of wet deposition for 2000-2002 based on critical assessment of the quality of existing regional network data. We show that for present day (year 2000 ACCMIP time slice), the ACCMIP results perform similarly to previously published multi-model assessments. For this time slice, we find a multimodel mean deposition of approximately 50 Tg(N) yr−1 from nitrogen oxide emissions, 60 Tg(N) yr−1 from ammonia emissions, and 83 Tg(S) yr−1 from sulfur emissions. The analysis of changes between 1980 and 2000 indicates significant differences between model and measurements over the United States but less so over Europe. This difference points towards a potential misrepresentation of 1980 NH3 emissions over North America. Based on ice core records, the 1850 deposition fluxes agree well with Greenland ice cores, but the change between 1850 and 2000 seems to be overestimated in the Northern Hemisphere for both nitrogen and sulfur species. Using the Representative Concentration Pathways (RCPs) to define the projected climate and atmospheric chemistry related emissions and concentrations, we find large regional nitrogen deposition increases in 2100 in Latin America, Africa and parts of Asia under some of the scenarios considered. Increases in South Asia are especially large, and are seen in all scenarios, with 2100 values more than double their 2000 counterpart in some scenarios and reaching >1300 mg(N)m−2 yr−1 averaged over regional to continental-scale regions in RCP 2.6 and 8.5, 30-50% larger than the values in any region currently (circa 2000). However, sulfur deposition rates in 2100 are in all regions lower than in 2000 in all the RCPs. The new ACCMIP multimodel deposition dataset provides state-of-the-science, consistent and evaluated time slice (spanning 1850-2100) global gridded deposition fields for use in a wide range of climate and ecological studies.

Lamarque, J.-F.↗
NASA NTRS2019

Extrusion of Complex Surface Meshes Utilizing Face Offsetting and Mean Curvature Smoothing

Grids for three-dimensional Computational Fluid Dynamics problems frequently require a prismatic layer of cells, typically extruded in the off-body direction from a two-dimensional surface mesh to properly resolve boundary layers. When the surface geometry is complex, the extrusion process can fail, resulting in the physical boundary layer being thicker than the prismatic layer, leading to under-resolved boundary layers. To address the shortcomings of existing grid generation tools, a new tool has been developed as part of the Mesh Tools suite, that is capable of extruding complex surface meshes. The new tool uses a face offsetting method to preserve surface curvature and a mean curvature smoothing algorithm to prevent the cells from self-intersecting in concave regions. Testing of the new tool found that not only were complex surface meshes able to be extruded to the desired thickness, but extrusion of simple surface meshes was also improved, due to the face offsetting method.

mesh extrusion↗
NASA NTRS2019

Numerical Study of the Effect of Mean Three-Dimensionality on Turbulence in Adverse-Pressure-Gradient Boundary Layers

Direct numerical simulation (DNS) is used to isolate the influence of sweep on a separating turbulent boundary layer. Attention here is limited to the behavior of the turbulence within the adverse-pressure-gradient (APG) region upstream of separation. Other regions and quantities are considered in Coleman, Rumsey & Spalart. The mean three-dimensionality and outer-layer inviscid skewing have only a slight effect upon the structure of the turbulence (measured by the relationship of the components of the Reynolds-stress tensor and the efficiency of the turbulence energy transfer) compared with that of the adverse pressure gradient, which dominates both the skewed and unskewed layers.

Coleman, G. N.↗
NASA NTRS2019

Application of High-Dimensional Fuzzy K-Means Cluster Analysis to CALIOP/CALIPSO Version 4.1 Cloud-Aerosol Discrimination

This study applies fuzzy k-means (FKM) cluster analyses to a subset of the parameters reported in the CALIPSO lidar level 2 data products in order to classify the layers detected as either clouds or aerosols. The results obtained are used to assess the reliability of the cloud–aerosol discrimination (CAD) scores reported in the version 4.1 release of the CALIPSO data products. FKM is an unsupervised learning algorithm, whereas the CALIPSO operational CAD algorithm (COCA) takes a highly supervised approach. Despite these substantial computational and architectural differences, our statistical analyses show that the FKM classifications agree with the COCA classifications for more than 94 % of the cases in the troposphere. This high degree of similarity is achieved because the lidar-measured signatures of the majority of the clouds and the aerosols are naturally distinct, and hence objective methods can independently and effectively separate the two classes in most cases. Classification differences most often occur in complex scenes (e.g., evaporating water cloud filaments embedded in dense aerosol) or when observing diffuse features that occur only intermittently (e.g., volcanic ash in the tropical tropopause layer). The two methods examined in this study establish overall classification correctness boundaries due to their differing algorithm uncertainties. In addition to comparing the outputs from the two algorithms, analysis of sampling, data training, performance measurements, fuzzy linear discriminants, defuzzification, error propagation, and key parameters in feature type discrimination with the FKM method are further discussed in order to better understand the utility and limits of the application of clustering algorithms to space lidar measurements. In general, we find that both FKM and COCA classification uncertainties are only minimally affected by noise in the CALIPSO measurements, though both algorithms can be challenged by especially complex scenes containing mixtures of discrete layer types. Our analysis results show that attenuated backscatter and color ratio are the driving factors that separate water clouds from aerosols; backscatter intensity, depolarization, and mid-layer altitude are most useful in discriminating between aerosols and ice clouds; and the joint distribution of backscatter intensity and depolarization ratio is critically important for distinguishing ice clouds from water clouds.

Zeng, Shan↗
NASA NTRS2019

The Exo-Brake as an Inexpensive Means of Achieving Sample Return from Low Earth Orbit – Recent Flight

The Exo-Brake is a simple, non-propulsive means of deorbiting small pay-loads from orbital platforms such as the Inter-national Space Station (ISS). Recent flight experiments involving the TechEdSat (TES) 6, 7, 8 are discussed in terms of both ‘targeted’ and ‘disposal’ de-orbit techniques. These build on the previous flight experiments with fixed surface areas – and now involve improved uplink/downlink communication and GPS for improved targeting and control. The recent targeting experiments are dis-cussed involving the TechEdSat-6,7,8 nanosatellites. The extension of the concept to a 1-stage, 3-stage, and lifting entry sample re-turn system are discussed.

Murbach, Marcus S.↗
NASA NTRS2020

Downward Migration of the Zonal‐Mean Circulation in the Tropical Atmosphere

The annular modes of the extratropical atmosphere have received much attention for quantifying variability of the jet streams and storm tracks, despite the fact that the midlatitude circulation itself does not vary uniformly with longitude. While tropical fluctuations in geopotential height have lower amplitude than in the extratropics, they exhibit stronger zonal coherence, or dynamical annularity. A simple index is developed to characterize zonal‐mean anomalies of the tropical circulation. It reveals that anomalies in geopotential height and zonal wind migrate downward from the upper troposphere to the surface on a time scale of about 10 days. These features are distinguishable from known modes of tropical variability, the Madden‐‐Julian Oscillation in particular. Evidence from reanalysis and idealized model experiments confirms that this downward migration is quite generic and driven by mechanically forced variations in the strength of the Hadley circulation on subseasonal time scales.

Atmospheric dynamics↗
NASA NTRS2021

PBL Height from AIRS, GPS RO, and MERRA-2 Products in NASA GES DISC and Their 10 Year Seasonal Mean Intercomparison

Within the planetary boundary layer (PBL), surface forcing response, drag, turbulence, and vertical mixing are important processes and play a more critical role here than in the overlying “free atmosphere”. The PBL Height (PBLH) is an important parameter in climate models, weather forecasts, and air quality prediction. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides data processing, archiving, and distribution services for numerous Earth science products. PBLH is a parameter in three products served by GES DISC, which are from the Atmospheric Infrared Sounder (AIRS), the Global Positioning System (GPS) radio occultation (RO) experiment, and the NASA reanalysis product Modern-Era Retrospective analysis for Research and Applications – 2 (MERRA-2). These products have different spatial and temporal resolutions and coverages, and their PBLH definitions are also different. To better serve the PBL research community, we have summarized the specifications of these products. A ten-year seasonal mean intercomparison is also conducted to provide further guidance to users. The intercomparison results show that MERRA-2 has a much shallower PBL than AIRS and GPS RO. An experimental study indicates the different PBLH definition in MERRA-2 caused smaller values of PBLH. The improvement of the water vapor retrieval in AIRS version 7 over version 6 results in the version 7 PBLH agreeing better with GPS RO and MERRA-2 than version 6, especially near the equator and low latitudes.

Feng Ding↗
NASA NTRSDate not supplied

Reversion to the mean of the Solar Wind Input to the Magnetosphere

Earth’s magnetosphere responds to solar wind input over time scales ranging from minutes to days. On minute times scales, researchers seek to identify discontinuities in the solar wind that may trigger transient magnetospheric phenomena such as flux transfer events or substorm onsets. On hour time scales, researchers seek to determine the solar wind phenomena that drive the growth phase of geomagnetic substorms and the storage of magnetic flux within the magnetotail. On longer time scales, researchers seek to determine the solar wind features than propel geomagnetic storms through their initial, main, and recovery phases. Researchers must, perforce, rely upon spacecraft located near the L1 libration point for observations of the solar wind input into the magnetosphere over periods ranging from hours to days. Some of the hazards of doing this are well known. Features seen far upstream at locations away from the Sun-Earth line may never arrive at Earth due to structure in the solar wind transverse to the Sun-Earth line. Alternatively, they may arrive at unexpected times due to errors in calculating their orientation and velocity. Other hazards when predicting the magnetospheric response to varying solar wind conditions are less well understood. When observations of large solar wind drivers at spacecraft far upstream and off the Sun-Earth line are used to select events for study, the ‘reversion to the mean’ effect associated with spatial structure and errors in arrival timing for solar wind features at Earth demands that the magnetosphere will actually be subjected to and respond to solar wind drivers with much lower strengths. Consequently, the magnetospheric response must saturate for the highest solar wind drivers.

David Sibeck↗
NASA NTRS2023

A Simple Boundary-Layer Transition Detection Method Using Mean Static Pressure Measurements

A simple method for detecting boundary-layer transition using only mean static pressure port data is presented. The method can be applied to most existing models with pressure taps, and only requires that a fine angle-of-attack sweep be performed. A small but abrupt change in the static pressure is visible when the transition front passes over the pressure tap. Results from a recent Juncture Flow test entry are used to illustrate the technique. Infrared thermography measurements of the transition front compare very well to the transition locations obtained from the static pressure ports. Some differences in behavior occur depending on the dominant transition mechanism. While the technique is somewhat qualitative, it can be an excellent tool for estimating the transition location when other tools are not readily available. Given the simplicity of the technique, and the fact that most wind-tunnel models are already designed with numerous static pressure taps, this method can be applied with very little overhead.

boundary-layer transition↗
NASA NTRS2019

Earth in Five Reactions: Grappling With Meaning and Value in Science

The Earth in Five Reactions Workshop posed two significant challenges: (1) the formulation of a conceptual definition of “reaction” and (2) the identification and ranking of the “most important reactions” in the context of planetary evolution. Attempted answers to those challenges, collated in this collection of articles, reflect both the opportunities and hurdles when scientists deal with questions of meaning and value.

Epistemology↗
NASA NTRS2022

Effects of Increasing the Category Resolution of the Sea Ice Thickness Distribution in a Coupled Climate Model on Arctic and Antarctic Sea Ice Mean State

Many modern sea ice models used in global climate models represent the subgrid-scale heterogeneity in sea ice thickness with an ice thickness distribution (ITD), which improves model realism by representing the significant impact of the high spatial heterogeneity of sea ice thickness on thermodynamic and dynamic processes. Most models default to five thickness categories. However, little has been done to explore the effects of the resolution of this distribution (number of categories) on sea-ice feedbacks in a coupled model framework and resulting representation of the sea ice mean state. Here, we explore this using sensitivity experiments in CESM2 with the standard 5 ice thickness categories and 15 ice thickness categories. Increasing the resolution of the ITD in a run with preindustrial climate forcing results in substantially thicker Arctic sea ice year-round. Analyses show that this is a result of the ITD influence on ice strength. With 15 ITD categories, weaker ice occurs for the same average thickness, resulting in a higher fraction of ridged sea ice. In contrast, the higher resolution of thin ice categories results in enhanced heat conduction and bottom growth and leads to only somewhat increased winter Antarctic sea ice volume. The spatial resolution of the ICESat-2 satellite mission provides a new opportunity to compare model outputs with observations of seasonal evolution of the ITD in the Arctic (ICESat-2; 2018–2021). Comparisons highlight significant differences from the ITD modeled with both runs over this period, likely pointing to underlying issues contributing to the representation of average thickness.

Madison M. Smith↗
NASA NTRS2023

Asymmetry in the Seasonal Cycle of Zonal-Mean Surface Air Temperature

At most latitudes, the seasonal cycle of zonal-mean surface air temperature is notably asymmetric: the length of the warming season is not equal to the length of the cooling season. The asymmetry varies spatially, with the cooling season being ∼40 days shorter than the warming season in the subtropics and the warming season being ∼100 days shorter than the cooling season at the poles. Furthermore, the asymmetry differs between the Northern Hemisphere and the Southern Hemisphere. Here, we show that these observed features are broadly captured in a simple model for the evolution of temperature forced by realistic insolation. The model suggests that Earth's orbital eccentricity largely determines the hemispheric contrast, and obliquity broadly dictates the meridional structure. Clouds, atmospheric heat flux convergence, and time-invariant effective surface heat capacity have minimal impacts on seasonal asymmetry. This simple, first-order picture has been absent from previous discussions of the surface temperature seasonal cycle.

seasonal cycle↗
NASA NTRSDate not supplied

Synergy of Satellite Radiation, Precipitation, and Other Meteorological Variable Observations for Global Mean Sea Surface Turbulent Heat Flux Estimation

Sea surface turbulent heat flux is one of the key components in global freshwater and energy balances and plays an important role in atmospheric dynamics, thermodynamics and general circulation. This turbulent heat flux is dominantly decided by sea surface latent heat release with some contribution from sensible heat exchange. The flux and its anomaly could significantly affect ocean heat storage and ocean circulation. They are part of and have great impacts on climate variability. Though the turbulent heat flux is extremely important for the climate and weather systems, only very limited ship and buoy observations of the flux are available over open oceans. There are no global, operational, direct measurements of this crucial meteorological variable. Global estimates are, basically, indirectly calculated from bulk turbulent flux parameterization with a combination of satellite column water vapor, sea surface water temperature, and wind speed observations. Critical parameters such as sea surface air temperature and humidity are estimated from empirical relations of theses variables with the water vapor and sea surface water temperature, respectively. Lacking accurate knowledge on surface air temperature and humidity, uncertainties in the parameterization and potential changes in the non-linear turbulent processes with long-term climate variations could cause large errors in estimated long-term turbulent fluxes from the indirect method as shown in current global sea surface turbulent flux datasets. This study uses synergized data of satellite global radiation, precipitation, and other meteorological variable observations to estimate sea surface turbulent heat fluxes. The radiation observations are made by the satellite Clouds and the Earth’s Radiant Energy System (CERES) sensors, while the global precipitation data is from NASA’s satellite Global Precipitation Climatology Project (GPCP). Other data includes satellite sea surface water temperature and wind speed observations. These datasets are obtained from a wide range of space sensors from passive to active instruments and from visible and near infrared to thermal infrared and microwave spectral sounders. One significant feature of these datasets is that they have multi-decades long climate records. Top-of-atmosphere (TOA) radiation and its anomaly represents the net heat energy input to the climate system, and the oceanic precipitation and ocean-land moisture transport can be used to quantify sea surface latent heat release. Based on the synergized datasets and the principle of global water and energy balances, global mean turbulent heat fluxes are estimated. The turbulent heat anomalies for the first two decades of the 21st century are, then, obtained mainly from global CERES radiation and GPCP precipitation anomalies, along with CERES derived ocean-land heat transports. Analysis indicates that the uncertainties in the estimated turbulent flux anomalies may be reduced considerably. The results suggest a strong needs in synchronized and synergized observations of atmospheric radiation, precipitation, and oceanic meteorological variables for long-term climate studies.

Bing Lin↗
NASA NTRS1924

Effect of changing the mean camber of an airfoil section

Methodical experiments with the series of airfoil sections of the same relative thickness and of variable relative cambers can be utilized for determining the effect of the camber on the aerodynamic properties of airfoil sections.

AIRFOILS - S T AE 13A (S C 96-104) (ROYER) - CHARA↗