SEARCH · Engineering Papers

Results for “local minimum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Modification of Jupiter's Stratosphere Three Weeks After the 2009 Impact

Infrared spectroscopy sensitive to thermal emission from Jupiter's stratosphere reveals effects persisting 23 days after the impact of a body in late July 2009. Measurements obtained on 2009 August II UT at the impact latitude of 56 S (planetocentric), using the Goddard Heterodyne Instrument for Planetary Wind and Composition mounted on the NASA Infrared Telescope Facility, reveal increased ethane abundance and the effects of aerosol opacity. An interval of reduced thermal continuum emission at 11. 744 ~lm is measured ~60o-80 towards planetary east of the impact site, estimated to be at 3050 longitude (System Ill). Retrieved stratospheric ethane mole fraction in the near vicinity of the impact site is enhanced by up to -60% relative to quiescent regions at this latitude. Thermal continuum emission at the impact site, and somewhat west of it, is significantly enhanced in the same spectra that retrieve enhanced ethane mole fraction. Assuming that the enhanced continuum brightness near the impact site results from thermalized aerosol debris blocking contribution from the continuum formed in the upper troposphere and indicating the local temperature, then continuum emission by a haze layer can be approximated by an opaque surface inserted at the 45-60 mbar pressure level in the stratosphere in an unperturbed thermal profile, setting an upper limit on the pressure and therefore a lower limit on the altitude of the top of the impact debris at this time. The reduced continuum brightness east of the impact site can be modeled by an opaque surface near the cold tropopause, which is consistent with a lower altitude of ejecta/impactor-formed opacity or significantly lesser column density of opaque haze material. The physical extent of the observed region of reduced continuum implies a minimum average velocity of 21 m/s transporting material prograde (planetary east) from the impact.

Fast, Kelly E.↗

DOE OSTI2025

Measurements of the polarization of several instabilities in the DIII-D tokamak

Recently, a method to infer the polarization of modes with frequencies much less than the ion cyclotron frequency was published [X.D. Du et al., Phys. Rev. Lett. 132 (2024) 215101]. The method uses measurements of electron temperature and density fluctuations δTₑ and δnₑ at the same spatial position to infer the local ratio of “acoustic polarization,” |δϕ ∥ |/(|δϕ ∥ |+|δψ|), where δϕ ∥ is the effective parallel potential and δψ is related to the parallel magnetic vector potential A ∥ . This paper summarizes key formulas, with emphasis on their range of validity, and elaborates on the workflow required to infer the acoustic polarization from experimental data. The drift-acoustic polarization of ellipticity-induced, toroidicity-induced, and reversed shear Alfvén eigenmodes is nearly zero, as expected for modes with predominately shear-Alfvénic polarization. The polarization of beta-induced Alfvén eigenmodes contains an acoustic component that increases with poloidal wave number. “Low frequency modes,” (instabilities that appear transiently when the minimum of the safety factor qₘᵢₙ passes through rational values) have large and highly variable acoustic polarization. In both experiment and simulation, fishbones have non-zero acoustic polarization that increases as the mode chirps down in frequency.

Alfven eigenmode↗

DOE OSTI2021

mosartwmpy: A Python implementation of the MOSART-WM coupled hydrologic routing and water management model

mosartwmpy is a Python implementation of the Model for Scale Adaptive River Transport with Water Management (MOSART-WM). This new version retains the functionality of the legacy model (written in FORTRAN) while providing new features to enhance user experience and extensibility. MOSART is a large-scale river-routing model used to study riverine dynamics of water, energy, and biogeochemistry cycles across local, regional, and global scales (Li et al., 2013). The WM component introduced by Voisin et al. (2013) represents river regulation through reservoir storage and release operations, diversions from reservoir releases, and allocation to sectoral water demands. Each reservoir release is independently calibrated using long-term mean monthly inflow into the reservoir, long-term mean monthly demand associated with this reservoir, and reservoir goals (flood control, irrigation, recreation, etc.). Generic monthly pre-release rules and storage targets are set up for individual reservoirs; however, those releases are updated annually for inter-annual variability (dry or wet year) and daily for environmental constraints such as flow minimum release and minimum/maximum storage levels. The WM model allows an evaluation of the impact of water management over multiple river basins at once (global, continental scales) and with consistent representation of human operations over the full domain.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2003

Differential Velocity Between Solar Wind Protons and Alpha Particles in Pressure Balance Structures

Pressure balance structures (PBSs) are a common high plasma beta feature in high latitude, high speed solar wind. They have been proposed as remnants of coronal plumes. If true, they should reflect the observation that plumes are rooted in unipolar magnetic flux concentrations in the photosphere and are heated as oppositely directed flux is advected into and reconnects with the flux concentration. A minimum variance analysis (MVA) of magnetic discontinuities in PBSs showed there is a larger proportion of tangential discontinuities than in the surrounding high speed wind, supporting the hypothesis that plasmoids or extended current sheets are formed during reconnection at the base of plumes. To further evaluate the character of magnetic field discontinuities in PBSs, differential streaming between alpha particles and protons is analyzed here for the same sample of PBSs used in the MVA. Alpha particles in high speed wind generally have a higher radial flow speed than protons. However, if the magnetic field is folded back on itself, as in a large amplitude Alfven wave, alpha particles will locally have a radial flow speed less than protons. This characteristic is used here to distinguish between folded back magnetic fields (which would contain rotational discontinuities) and tangential discontinuities using Ulysses high latitude, high speed solar wind data. The analysis indicates that almost all reversals in the radial magnetic field in PBSs are folded back field lines. This is found to also be true outside PBSs, supporting existing results for typical high speed, high latitude wind. There remains a small number of cases that appear not to be folds in the magnetic field and which may be flux tubes with both ends rooted in the Sun. The distinct difference in MVA results inside and outside PBSs remains unexplained.

Yamauchi, Y.↗

DOE OSTI2022

Integrating multimodal data through interpretable heterogeneous ensembles

Motivation: Integrating multimodal data represents an effective approach to predicting biomedical characteristics, such as protein functions and disease outcomes. However, existing data integration approaches do not sufficiently address the heterogeneous semantics of multimodal data. In particular, early and intermediate approaches that rely on a uniform integrated representation reinforce the consensus among the modalities but may lose exclusive local information. The alternative late integration approach that can address this challenge has not been systematically studied for biomedical problems. Results: We propose Ensemble Integration (EI) as a novel systematic implementation of the late integration approach. EI infers local predictive models from the individual data modalities using appropriate algorithms and uses heterogeneous ensemble algorithms to integrate these local models into a global predictive model. We also propose a novel interpretation method for EI models. We tested EI on the problems of predicting protein function from multimodal STRING data and mortality due to coronavirus disease 2019 (COVID-19) from multimodal data in electronic health records. We found that EI accomplished its goal of producing significantly more accurate predictions than each individual modality. It also performed better than several established early integration methods for each of these problems. The interpretation of a representative EI model for COVID-19 mortality prediction identified several disease-relevant features, such as laboratory test (blood urea nitrogen and calcium) and vital sign measurements (minimum oxygen saturation) and demographics (age). These results demonstrated the effectiveness of the EI framework for biomedical data integration and predictive modeling.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

A Combined Computational and Mathematical Analysis of Interconnect Fatigue Potential in Photovoltaic Modules

A finite element model of a 60-cell monocrystalline silicon glass-polymer photovoltaic module was simulated with ±1.0 kPa and ±2.4 kPa loads applied to the glass to calculate the deformation under load. Cell-to-cell displacements were used to approximate interconnect strain and stress. A mathematical fatigue cycle life relation was fitted to data for the interconnect material (copper), to generate a life prediction at each interconnect location based on the local stress means, reversal extents, and amplitudes. Interconnect stress was found to be significantly asymmetric about zero despite symmetric positive and negative module loads due to laminate thickness offsets about the neutral plane and the effects of module framing. Cycle life results indicated that interconnect fatigue failure was unlikely to occur over a 30-year lifetime of conservative wind and snow load cycles since the typical cell design feature of leaving some unconstrained length between the cell edge and first solder pad increases the effective gauge length and decreases the stress levels below the material endurance limit. Follow-up analyses found that 3.6 mm and 6.4 mm were the minimum unconstrained lengths required to survive the assumed lifetime of wind and snow cycles, respectively, confirming that typical industrial module constructions with 8–15 mm unconstrained lengths should survive conservatively. Notably, large magnitude, low-cycle snow loading was consistently the limiting factor requiring a longer unconstrained interconnect length. Finally, insights and workflows from this study inform module interconnection design limits for survival against mechanical fatigue in deployment environments.

14 SOLAR ENERGY↗

DOE OSTI2024

Thermal activation signatures of the Anderson insulator and the Wigner solid forming near ν = 1

When interactions overcome disorder, integer quantum Hall plateaus support topological phases with different bulk insulators. In the center of the ν = 1 plateau the bulk is an Anderson-type insulator, while in the flanks of the plateau the bulk is the integer quantum Hall Wigner solid. We find that the activation energy along the ν = 1 plateau exhibits a very dramatic nonmonotonic dependence on the magnetic field, a dependence that is strongly correlated with the stability regions of the two phases. Furthermore, the activation energy has an unexpected minimum at the boundary between the Anderson insulator and the Wigner solid. Our findings constrain the theory of the integer quantum Hall Wigner solid, determine its thermodynamic properties, and reveal unusual behavior at the boundary between the Anderson insulator and the Wigner solid. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1950

Investigation of Aerodynamic and Icing Characteristics of Water-Inertia-Separation Inlets for Turbojet Engines

The results of an investigation of several internal water-inertia-separation inlets consisting of a main duct and an alternate duct designed to prevent automatically the entrance of large quantities of water into a turbojet engine in icing conditions are presented. Total-pressure losses and icing characteristics for a direct-ram inlet and the inertia-separation inlets are compared at similar aerodynamic and simulated icing conditions. Complete ice protection for inlet guide vanes could not be achieved with the inertia-separation inlets investigated. Approximately 8 percent of the volume of water entering the nacelles remained. In the air passing into the compressor inlet. Heavy alternate-duct-elbow ice formations caused by secondary inertia separation resulted in rapid total-pressure losses and decreases in mass flow. The duration in an icing condition for an inertia-separation- inlet, without local surface heating, was increased approximately four times above that for a direct-ram inlet with a compressor-inlet screen. For normal nonicing operation, the inertia-separation- inlet total-pressure losses were comparable to a direct-ram installation. The pressure losses and the circumferential uniformity of the mass flow in all the inlets were relatively independent of angle of attack. Use of an inertia-separation inlet would in most cases require a larger diameter nacelle than a direct-ram inlet in order to obtain an alternate duct sufficiently large to pass the required engine air flow at duct Mach numbers below 1.0 at the minimum area.

VonGlahn, Uwe↗

DOE OSTI2020

Microstructure and Mechanical Properties of Intercritically Treated Grade 91 Steel

Premature creep failures at the intercritical heat affected zone (ICHAZ) of creep-resistant steel weldments have been frequently reported. However, the creep degradation mechanism of different microstructure constituents in ICHAZ is complicated and needs further clarification. In this work, Grade 91 steel was intercritically heat-treated at a temperature (860 °C) between the critical temperatures AC1 and AC3, and a correlation between microstructure and mechanical properties of the heat-treated specimen was built. The effects of austenitization and tempering resulting from the intercritical treatment (IT) differentiated the local strain energies between the two microstructure constituents: newly transformed martensite (NTM) and over-tempered martensite (OTM). The formation of NTM grains led to a hardness increase from 247 HV0.5 in the base metal to 332 HV0.5 in the IT specimen. The ultimate tensile strength (UTS) increased from 739 MPa in the base metal to 1054 MPa in the IT specimen. Extensive growth of the OTM grains and rapid recovery of NTM grains took place simultaneously in the IT specimen during a typical tempering at 760 °C. These microstructure degradations led to a lowered hardness of 178 HV0.5, a reduced UTS of 596 MPa, and a poor creep resistance with a minimum creep strain rate of 0.49 %/h at 650 °C in an IT + tempering (ITT) specimen.

36 MATERIALS SCIENCE↗

NASA NTRS1984

The Soft X-ray Diffuse Background: Implications for the Nature of the Local Interstellar Medium

Observations of the diffuse X-ray background in the B and C bands (130-188 eV and 160-284 eV, respectively) provide convincing evidence for the existence of high-temperature interstellar gas. Since the opacity of normal interstellar material is very high, it is assumed that the soft X-ray flux observed in the galactic plane originates within a few hundred parsecs of the Sun. The intensity and B/C ratio of this low-latitude flux can be provided by emission from an equilibrium plasma with normal abundances, T =10 to the 6th power K, and 0.0019 cm(-6) pc emission measure. More sophisticated nonequilibrium models of material heated by a supernova blast wave would reduce the required emission measure somewhat, but not by so much as a factor of two. Arbitrarily limiting the pressure to 10 to the 4th power cm(-3) K gives a maximum density of 0.005 cm(-3) and a minimum radius for the emitting region of 75 pc. This fits in well with ultraviolet interstellar absorption measurements which indicate that the interstellar medium is very deficient in neutral hydrogen out to approx. 100 pc from the Sun.

Mccammon, D.↗

NASA NTRS1997

PSP Testing at NASA Ames Research Center

Pressure sensitive paints (PSPs) are now used routinely for measuring surface pressures on wind tunnel models at transonic and supersonic Mach numbers. The method utilizes a surface coating containing fluorescent or phosphorescent materials, the brightness of which varies with the local air pressure on the surface. The present paper will summarize PSP activities (in progress and planned) at the NASA Ames Research Center. One of the main accomplishments at NASA Ames has been the development of a PSP measurement system that is production testing capable. This system has been integrated successfully into the large-scale wind tunnel facilities at Ames. There are several problems related to PSP testing which are unique to large-scale wind tunnel testing. The hardware is often difficult to set-up and must operate under harsh conditions (e.g. high pressures and low temperatures). The data acquisition and reduction times need to be kept to a minimum so that the overall wind tunnel productivity is not compromised. The pressure sensitive paints needs to be very robust; the paints must readily adhere to different surfaces with varying geometries and remain functional for long running times. The paint must have well understood, and preferably minimal, temperature sensitivity since fine control of the tunnel temperature is not easily achievable in the larger wind tunnels. In an effort to improve the overall accuracy of the PSP technique, we are currently evaluating some referenced pressure sensitive paints which contain a pressure- independent luminophor in addition to the one which is affected by the surface pressure. The two luminophors are chosen so that their emission wavelengths are somewhat different. Then by taking two 'wind-on' images with either two cameras (with different filters) or one camera with a rotating filter system, the need for 'wind-off' images can be eliminated. The ratio of the two wind-on images accounts for nonuniform lighting and model motion problems (physical movement of the model under aerodynamic loading) are not a concern any more. The paints and data acquisition and reduction software for this type of a PSI system are currently under development and evaluation. Additional information is contained within the original extended abstract.

Bell, J. H.↗

NASA NTRS2004

Differential Velocity between Solar Wind Protons and Alpha Particles in Pressure Balance Structures

Pressure balance structures (PBSs) are a common high-plasma beta feature in high-latitude, high-speed solar wind. They have been proposed as remnants of coronal plumes. If true, they should reflect the observation that plumes are rooted in unipolar magnetic flux concentrations in the photosphere and are heated as oppositely directed flux is advected into and reconnects with the flux concentration. A minimum variance analysis (MVA) of magnetic discontinuities in PBSs showed there is a larger proportion of tangential discontinuities than in the surrounding high-speed wind, supporting the hypothesis that plasmoids or extended current sheets are formed during reconnection at the base of plumes. To further evaluate the character of magnetic field discontinuities in PBSs, differential streaming between alpha particles and protons is analyzed here for the same sample of PBSs used in the MVA. Alpha particles in high-speed wind generally have a higher radial flow speed than protons. However, if the magnetic field is folded back on itself, as in a large-amplitude Alfven wave, alpha particles will locally have a radial flow speed less than protons. This characteristic is used here to distinguish between folded back magnetic fields (which would contain rotational discontinuities) and tangential discontinuities using Ulysses high-latitude, high-speed solar wind data. The analysis indicates that almost all reversals in the radial magnetic field in PBSs are folded back field lines. This is found to also be true outside PBSs, supporting existing results for typical high-speed, high-latitude wind. There remains a small number of cases that appear not to be folds in the magnetic field and which may be flux tubes with both ends rooted in the Sun. The distinct difference in MVA results inside and outside PBSs remains unexplained.

Yamauchi, Yohei↗

NASA NTRS2012

Evidence for Ultra-Fast Outflows in Radio-Quiet AGNs: III - Location and Energetics

Using the results of a previous X-ray photo-ionization modelling of blue-shifted Fe K absorption lines on a sample of 42 local radio-quiet AGNs observed with XMM-Newton, in this letter we estimate the location and energetics of the associated ultrafast outflows (UFOs). Due to significant uncertainties, we are essentially able to place only lower/upper limits. On average, their location is in the interval approx.0.0003-0.03pc (approx.10(exp 2)-10(exp 4)tau(sub s) from the central black hole, consistent with what is expected for accretion disk winds/outflows. The mass outflow rates are constrained between approx.0.01- 1 Stellar Mass/y, corresponding to approx. or >5-10% of the accretion rates. The average lower-upper limits on the mechanical power are logE(sub K) approx. or = 42.6-44.6 erg/s. However, the minimum possible value of the ratio between the mechanical power and bolometric luminosity is constrained to be comparable or higher than the minimum required by simulations of feedback induced by winds/outflows. Therefore, this work demonstrates that UFOs are indeed capable to provide a significant contribution to the AGN r.osmological feedback, in agreement with theoretical expectations and the recent observation of interactions between AGN outflows and the interstellar medium in several Seyferts galaxies .

Tombesi, F.↗

NASA NTRS2015

Odyssey Mars Orbiter - Thirteen Years of On-Orbit Navigation

The Odyssey spacecraft has been in Mars orbit since October 24, 2001 and has nearly completed 61,490 orbits. Navigation operational objectives include the following: Control the local mean solar time for science observations; for most of the mission, this varied from 3:45 pm to 5:20 pm. Currently, an orbit trim maneuver planned for November 10, 2015 will place Odyssey at 6:45 pm/6:45 am at equator crossings in order to observe early morning ground frost, fog and clouds. Initially, Odyssey was late by 42 minutes for an over-flight of the critical seven minutes of Phoenix's entry, descent and landing (EDL). Odyssey was successfully positioned for this over-flight using the Delta V from angular momentum desaturations (AMD). Similar results for the Mars Science Laboratory's EDL and Comet Siding Spring's minimum risk location will be presented. Odyssey has and continues to relay significant quantities of rover data. Navigation successfully models frequent AMD Delta Vs in order to generate accurate sixty-day trajectory predictions; a typical timing error is 25 seconds after 60 days. However, unexpected events, such as safe-mode entries with their larger and more frequent thrusting, severely impact that trajectory accuracy. Impacted trajectories can have timing errors ranging from a few minutes to ten-to-fifteen minutes after sixty-days. Other analyses (briefly stated) include: a) the offset of the orbital ground track pattern after an initial cycle of 30 days or 362 orbits and b) an operations environment of continuous thrusting if/when one of the three remaining reaction wheels fails.

trajectory accuracy↗

DOE OSTI2023

Domain wall motion across microstructural features in polycrystalline ferroelectric films

This paper describes the effect of microstructural features such as grain boundaries and triple points on the pinning of domain wall motion in perovskite Pb(Zr 0.52 Ti 0.48 )O 3 (PZT) films on polycrystalline SrRuO 3 /SrTiO 3 substrates. Here, spatial variability in the collective domain wall dynamics was assessed using non-linearity mapping via Band Excitation Piezoresponse Force Microscopy (BE-PFM). Collocating the non-linearity maps with triple point locations (as visualized by EBSD) allowed for exploration of the effects that local microstructure (e.g., grain boundary) have on domain wall motion. It was found that the extrinsic behavior varied with both the misorientation angle and the proximity to the grain boundary. The width of influence of individual grain boundaries on the motion of domain walls was a function of the character of the grain boundary; random grain boundaries exhibit deeper minima in α d /d 33,initial and larger widths of influence (up to 905 nm) compared to coincident site lattice (CSL) boundaries (up to 572 nm). Additionally, triple points containing larger numbers of random boundaries exhibited non-Rayleigh behavior to greater distances, suggesting that the triple point provides either a deep potential minimum or a region where domain wall motion is unfavorable.

36 MATERIALS SCIENCE↗

NASA NTRS1989

The relative line strength and intensity of the N II 2143 doublet

The doublet emission from N II at 2139.7 A and 2143.6 A was observed by a 1.4-m scanning spectrometer with 3.1 A resolution in the daytime, high-altitude thermosphere during moderate levels of solar activity. The spectrometer viewed the earth's limb 5 deg below the local horizontal to give a nominal tangent height of 152 km. Both sub band heads of the nitric oxide gamma band system were resolved in the data at the resolution used. The emission features from N II are clearly evident on the short wavelength shoulder of the (1, 0) band. Synthetic profiles of the (1, 0) gamma band and the (0, 3) delta band of nitric oxide were fitted to the data using a chi-square analysis. These contributions were removed from the data leaving a residual emission, considered to be the N II doublet. A chi-square minimization of the data relative to a synthetic intensity profile was done. The minimum was for a line strength ratio between the 2139 A and 2143 A lines of 0.58 + or - 0.08. The mean solar EUV flux deduced from the intensity of the N II emission in this experiment is lower than other reported observations, consistent with a lower solar activity level.

Bucsela, Eric J.↗

DOE OSTI2023

Transition metal elements as donor dopants in CdO

CdO has been shown to achieve a high electron concentration N (> 10 21 cm -3 ) and at the same time a high mobility μ (> 100cm 2 /V s) when doped with conventional shallow dopants (In or Ga), and consequently making it a transparent conducting oxide with very low resistivity ρ <10 -4 $\Omega$ cm. In this work, the properties of CdO thin films doped with a series of transition metal elements (CdO:TM) with partially filled 3d and 4d shells, including Sc, Ti, V, Cr, Fe, Y, Mo, and W, were investigated. We find that doping with these TM elements can effectively increase the N in CdO to a maximum N (N max ) of ~(7-12)×10 20 cm -3 with a dopant concentration x max of 4-7 %. However, unlike CdO:In, the μ of CdO:TM films drops rapidly from > 100 to < 10cm 2 /Vs as the dopant concentration x increases, so that they can only achieve a minimum ρ of ~ (1-2) × 10 -4 $\Omega$ cm, ~ a factor of 2-3 higher than that in CdO:In. As a result, free-carrier absorption and plasma reflection effects limit their optical transparency to <1200 nm. For most 3d TM dopants, a qualitatively higher d-donor level E d,donor gives rise to higher E F,max or a higher N max . Although at low x, the optical band gap E opt of CdO:TM follows the calculated values due to free-carrier effects, as x increases, E opt values are significantly higher than the calculated values. This is believed to be an effect of the anticrossing interaction of the localized d-levels and the extended CdO conduction-band (CB) states, giving rise to a lower occupied E - and an upper unoccupied E + subband. In conclusion, the restructured CBs have much flatter dispersion, which also results in a much higher effective mass $m^{\star}_{e}$, hence it can also explain the much lower μ of CdO:TM films with high N.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Point Source Likelihood Framework (psl) v1.0

PSL is a software framework for localizing radiation point sources in a 3D environment using a freely moving radiation detector system. The framework assumes a single point source of radiation is in the environment and uses known detector positions and orientations along with their radiation measurements to find the most likely location of the point source. This approach to the problem enables analyses that improve upon the capability of a standard Maximum Likelihood Expectation Maximization (MLEM) approach, such as setting a source detection threshold, finding a likelihood interval for the position of the source, finding a likelihood interval for the activity (intensity) of the source, determining whether more than one point source may be present, and generating a map of Minimum Detectable Activity (MDA) for a given source type. Applications include radiological and nuclear security, consequence management, decontamination and decommissioning of nuclear facilities, and radiological emergency response.

Joshi, Tenzing↗