SEARCH · Engineering Papers

Results for “inversion methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Sources of uncertainty in direct seismological measurements of the solar helium abundance

The methods by which Dappen et al. (1988, 1990, 1991) and Dziembowski et al. (1990, 1991, 1992) recently obtained discrepant estimates of the helium abundance in the solar convection zone are compared. The aim of the investigation reported in this paper is to identify the main source of the discrepancy. Using as proxy data eigenfrequencies of a set of modes of a theoretical solar model, computed with the same physics as were the frequencies of a reference model with which these data are compared, the two methods yield similar results. Thus we ascertain that the principal source of the discrepancy is not in the inversions themselves, which yield essentially a measure of the variation of the adiabatic exponent gamma of the material in the He II ionization zone. Instead it is in the approximations adopted in the treatment of heavy elements in the equation of state used to relate the variation of gamma to chemical composition. We obtain acceptably consistent results when inverting solar data by two methods using the same equation of state. We attempt to identify the likely residual sources of uncertainty.

Kosovichev, A. G.↗

NASA NTRS1993

Polarimetric radar data decomposition and interpretation

Significant efforts have been made to decompose polarimetric radar data into several simple scattering components. The components which are selected because of their physical significance can be used to classify SAR (Synthetic Aperture Radar) image data. If particular components can be related to forest parameters, inversion procedures may be developed to estimate these parameters from the scattering components. Several methods have been used to decompose an averaged Stoke's matrix or covariance matrix into three components representing odd (surface), even (double-bounce) and diffuse (volume) scatterings. With these decomposition techniques, phenomena, such as canopy-ground interactions, randomness of orientation, and size of scatters can be examined from SAR data. In this study we applied the method recently reported by van Zyl (1992) to decompose averaged backscattering covariance matrices extracted from JPL SAR images over forest stands in Maine, USA. These stands are mostly mixed stands of coniferous and deciduous trees. Biomass data have been derived from field measurements of DBH and tree density using allometric equations. The interpretation of the decompositions and relationships with measured stand biomass are presented in this paper.

Sun, Guoqing↗

NASA NTRS1991

Preferred sound intensity increase for sensation of half distance

Two experiments are reported that examine the preferred increase in intensity for creating a percept of half auditory distance from a reference. The results of both experiments indicate that the use of an inverse square law (increments of 6 dB) is not the best signal-processing method for this purpose. The application of the results is potentially useful towards the software design of 3-D auditory display systems that manipulate the perceived distance of auditory inputs in relationship to actual distances of physical objects.

Begault, Durand R.↗

NASA NTRS1999

Surface Imaging Skin Friction Instrument and Method

A surface imaging skin friction instrument allowing 2D resolution of spatial image by a 2D Hilbert transform and 2D inverse thin-oil film solver, providing an innovation over prior art single point approaches. Incoherent, monochromatic light source can be used. The invention provides accurate, easy to use, economical measurement of larger regions of surface shear stress in a single test.

Brown, James L.↗

NASA NTRS2002

High Resolution Soil Water from Regional Databases and Satellite Images

This viewgraph presentation provides information on the ways in which plant growth can be inferred from satellite data and can then be used to infer soil water. There are several steps in this process, the first of which is the acquisition of data from satellite observations and relevant information databases such as the State Soil Geographic Database (STATSGO). Then probabilistic analysis and inversion with the Bayes' theorem reveals sources of uncertainty. The Markov chain Monte Carlo method is also used.

Morris, Robin D.↗

NASA NTRS2006

Remote Sensing of Spectral Aerosol Properties: A Classroom Experience

Bridging the gap between current research and the classroom is a major challenge to today s instructor, especially in the sciences where progress happens quickly. NASA Goddard Space Flight Center and the University of Maryland teamed up in designing a graduate class project intended to provide a hands-on introduction to the physical basis for the retrieval of aerosol properties from state-of-the-art MODIS observations. Students learned to recognize spectral signatures of atmospheric aerosols and to perform spectral inversions. They became acquainted with the operational MODIS aerosol retrieval algorithm over oceans, and methods for its evaluation, including comparisons with groundbased AERONET sun-photometer data.

Levy, Robert C.↗

NASA NTRS2018

Using Machine-Learning Methods and Expert Prediction Probabilities to Forecast Solar Flares

It has long been known that studying connection between solar flares and properties of magnetic field in active regions is very important for understanding the flare physics and developing space weather forecasts. The Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory (SDO/HMI) obtains tremendous amounts of magnetic field data products. However the operational NOAA Space Weather Prediction Center (SWPC) forecasts of solar flares still represent prediction probabilities issued by the experts. In this research we investigate the possibilities to enhance the daily operational flare forecasts performed at the SWPC by developing a synergy of the expert predictions and physics-based criteria, and by employing machine-learning methods. Among the physics-based criteria we consider the descriptors of the Polarity Inversion Line (PIL) and Space weather HMI Active Region Patches (SHARP), and derive from them daily characteristics of the entire Sun. We also consider the daily descriptors of the GOES Soft X-Ray (SXR) 1-8 Angstroms flux such as the flare history of the previous days and averaged X-Ray flux. We estimate the effectiveness in separation of flaring and non-flaring cases for each characteristic, as well as for the expert prediction probabilities, and find that some PIL, SHARP and SXR descriptors are as effective as the expert prediction probabilities and should be considered to issue the flare forecast. Finally, we train and test several Machine-Learning classification algorithms (Support Vector Classifiers with various kernel functions, k-Nearest Neighbor Classifier, Random Forest Classifier, and Neural Networks) using the most effective descriptors and expert prediction probabilities, and compare the obtained predictions with the current SWPC forecasts.

Machine-Learning↗

NASA NTRS2017

Imaging a Free-Geometry Magma Reservoir Using FEM-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluidfilled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

NASA NTRS2017

Imaging the Complex Geometry of a Magma Reservoir Using Fem-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluid-filled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

NASA NTRS1981

A numerical method for solving the equations of compressible viscous flow

Although much progress has already been made in solving problems in aerodynamic design, many new developments are still needed before the equations for unsteady compressible viscous flow can be solved routinely. This paper describes one such development. A method for solving these equations has been devised that: (1) is second-order accurate in space and time; (2) is unconditionally stable; (3) preserves conservation form; (4) requires no block or scalar tridiagonal inversions; (5) is simple and straightforward to program (estimated 10% modification for the update of many existing programs); (6) is more efficient than present methods; and (7) should easily adapt to current and future computer architectures. Computational results for laminar and turbulent flows at Reynolds numbers from 300,000 to 3 x 10 to the 7th and at CFL numbers as high as 1000 are compared with theory and experiment.

Maccormack, R. W.↗

NASA NTRS1982

A Numerical Method for Solving the Equations of Compressible Viscous Flow

Although much progress has already been made In solving problems in aerodynamic design, many new developments are still needed before the equations for unsteady compressible viscous flow can be solved routinely. This paper describes one such development. A new method for solving these equations has been devised that 1) is second-order accurate in space and time, 2) is unconditionally stable, 3) preserves conservation form, 4) requires no block or scalar tridiagonal inversions, 5) is simple and straightforward to program (estimated 10% modification for the update of many existing programs), 6) is more efficient than present methods, and 7) should easily adapt to current and future computer architectures. Computational results for laminar and turbulent flows at Reynolds numbers from 3 x 10(exp 5) to 3 x 10(exp 7) and at CFL numbers as high as 10(exp 3) are compared with theory and experiment.

MacCormack, R. W.↗

NASA NTRS2004

Reduced Order Methods for Prediction of Thermal-Acoustic Fatigue

The goal of this investigation is to assess the quality of high-cycle-fatigue life estimation via a reduced order method, for structures undergoing random nonlinear vibrations in a presence of thermal loading. Modal reduction is performed with several different suites of basis functions. After numerically solving the reduced order system equations of motion, the physical displacement time history is obtained by an inverse transformation and stresses are recovered. Stress ranges obtained through the rainflow counting procedure are used in a linear damage accumulation method to yield fatigue estimates. Fatigue life estimates obtained using various basis functions in the reduced order method are compared with those obtained from numerical simulation in physical degrees-of-freedom.

Przekop, A.↗

NASA NTRS1994

A Fully Implicit Time Accurate Method for Hypersonic Combustion: Application to Shock-induced Combustion Instability

A new fully implicit, time accurate algorithm suitable for chemically reacting, viscous flows in the transonic-to-hypersonic regime is described. The method is based on a class of Total Variation Diminishing (TVD) schemes and uses successive Gauss-Siedel relaxation sweeps. The inversion of large matrices is avoided by partitioning the system into reacting and nonreacting parts, but still maintaining a fully coupled interaction. As a result, the matrices that have to be inverted are of the same size as those obtained with the commonly used point implicit methods. In this paper we illustrate the applicability of the new algorithm to hypervelocity unsteady combustion applications. We present a series of numerical simulations of the periodic combustion instabilities observed in ballistic-range experiments of blunt projectiles flying at subdetonative speeds through hydrogen-air mixtures. The computed frequencies of oscillation are in excellent agreement with experimental data.

Yungster, Shaye↗

NASA NTRS2009

Automatic Determination of the Conic Coronal Mass Ejection Model Parameters

Characterization of the three-dimensional structure of solar transients using incomplete plane of sky data is a difficult problem whose solutions have potential for societal benefit in terms of space weather applications. In this paper transients are characterized in three dimensions by means of conic coronal mass ejection (CME) approximation. A novel method for the automatic determination of cone model parameters from observed halo CMEs is introduced. The method uses both standard image processing techniques to extract the CME mass from white-light coronagraph images and a novel inversion routine providing the final cone parameters. A bootstrap technique is used to provide model parameter distributions. When combined with heliospheric modeling, the cone model parameter distributions will provide direct means for ensemble predictions of transient propagation in the heliosphere. An initial validation of the automatic method is carried by comparison to manually determined cone model parameters. It is shown using 14 halo CME events that there is reasonable agreement, especially between the heliocentric locations of the cones derived with the two methods. It is argued that both the heliocentric locations and the opening half-angles of the automatically determined cones may be more realistic than those obtained from the manual analysis

Pulkkinen, A.↗

NASA NTRS1988

Inversion of the Solar Rotation Rate Versus Depth and Latitude

Three differential inversion techniques were used to compute the internal solar rotation rate from several sets of n-averaged frequency splittings. An iterative variation of the spectral expansion method; the optimal averaging kernel method; and a piecewise constant constrained least square method were used to invert the data. Each computation was carried out independently. While they present similar trends, each of the solutions differs in detail. A consistent feature in all the inversions is the disappearance of differential rotation below the base of the convection zone. Also, a strong differential signature in the deeper part of the convection zone is present in most of the solutions. A slow decrease of the rotation rate with depth for the equatorial and midlatitude curves is significant in the spectral expansion and the least square results but only marginally apparent in the averaging kernel results.

Korzennik, Sylvain G.↗

NASA NTRS1978

Calculation of far-field jet noise spectra from near-field measurements using true source location

Jet mixing noise data at different measurement distances are compared with values calculated from the Lockheed prediction method. Although the method does not include any acoustic near-field effects, the measured and predicted results agree well where the measured data deviates from the inverse square law. It is therefore suggested that departures from the inverse square law are primarily the result of (1) the non-negligible distance between the nozzle exit plane and the true axial source location and (2) the jet mixing noise directionality, as modeled in the prediction method. Allowing for these effects, jet noise data at 8 and 96 diameters over a wide range of frequencies, angles and jet conditions are shown to collapse with reasonable accuracy.

Ahuja, K. K.↗

NASA NTRS1990

Sedimentary Facies Analysis Using AVIRIS Data: A Geophysical Inverse Problem

AVIRIS data can be used to quantitatively analyze and map sedimentary lithofacies. The observed radiance spectra can be reduced to 'apparent reflectance' spectra by topographic and reflectance characterization of several field sites within the image. These apparent reflectance spectra correspond to the true reflectance at each pixel, multiplied by an unknown illumination factor (ranging in value from zero to one). The spatial abundance patterns of spectrally defined lithofacies and the unknown illumination factors can be simultaneously derived using constrained linear spectral unmixing methods. Estimates of the minimum uncertainty in the final results (due to noise, instrument resolutions, degree of illumination and mixing systematics) can be made by forward and inverse modeling. Specific facies studies in the Rattlesnake Hills region of Wyoming illustrate the successful application of these methods.

Boardmann, Joe W.↗

NASA NTRS2016

Simulation of Thermographic Responses of Delaminations in Composites with Quadrupole Method

The application of the quadrupole method for simulating thermal responses of delaminations in carbon fiber reinforced epoxy composites materials is presented. The method solves for the flux at the interface containing the delamination. From the interface flux, the temperature at the surface is calculated. While the results presented are for single sided measurements, with ash heating, expansion of the technique to arbitrary temporal flux heating or through transmission measurements is simple. The quadrupole method is shown to have two distinct advantages relative to finite element or finite difference techniques. First, it is straight forward to incorporate arbitrary shaped delaminations into the simulation. Second, the quadrupole method enables calculation of the thermal response at only the times of interest. This, combined with a significant reduction in the number of degrees of freedom for the same simulation quality, results in a reduction of the computation time by at least an order of magnitude. Therefore, it is a more viable technique for model based inversion of thermographic data. Results for simulations of delaminations in composites are presented and compared to measurements and finite element method results.

Winfree, William P.↗