Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grid solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Analysis and calculation of macrosegregation in a casting ingot. MPS solidification model. Volume 1: Formulation and analysis

The physical and numerical formulation of a model for the horizontal solidification of a binary alloy is described. It can be applied in an ingot. The major purpose of the model is to calculate macrosegregation in a casting ingot which results from flow of interdendritic liquid during solidification. The flow, driven by solidification contractions and by gravity acting on density gradients in the interdendritic liquid, was modeled as flow through a porous medium. The symbols used are defined. The physical formulation of the problem leading to a set of equations which can be used to obtain: (1) the pressure field; (2) the velocity field: (3) mass flow and (4) solute flow in the solid plus liquid zone during solidification is presented. With these established, the model calculates macrosegregation after solidification is complete. The numerical techniques used to obtain solution on a computational grid are presented. Results, evaluation of the results, and recommendations for future development of the model are given. The macrosegregation and flow field predictions for tin-lead, aluminum-copper, and tin-bismuth alloys are included as well as comparisons of some of the predictions with published predictions or with empirical data.

Maples, A. L.↗

A variational principle for compressible fluid mechanics: Discussion of the multi-dimensional theory

The variational principle for compressible fluid mechanics previously introduced is extended to two dimensional flow. The analysis is stable, exactly conservative, adaptable to coarse or fine grids, and very fast. Solutions for two dimensional problems are included. The excellent behavior and results lend further credence to the variational concept and its applicability to the numerical analysis of complex flow fields.

Prozan, R. J.↗

A perspective of theoretical and applied computational fluid dynamics

The present effectiveness and future promise of computational fluid dynamics (CFD) are discussed. The CFD ideal of computer-designed flight vehicles and the progress that has been made toward its achievement, expressed in terms of primary and secondary pacing items, are also addressed. The primary pacing items listed by Chapman - grid generation, turbulence modeling, solution methodology development, and mainframe computer methods and architecture - are modified and reviewed. Important secondary pacing items in CFD development are also examined: algorithm development, complex geometry definition, and predata and postata processing. In addition, user requirements placed on CFD computer codes are defined and some problems associated with the dissemination of CFD technology are identified.

Kutler, P.↗

Self-adjusting grid methods for one-dimensional hyperbolic conservation laws

The automatic adjustment of a grid which follows the dynamics of the numerical solution of hyperbolic conservation laws is given. The grid motion is determined by averaging the local characteristic velocities of the equations with respect to the amplitudes of the signals. The resulting algorithm is a simple extension of many currently popular Godunov-type methods. Computer codes using one of these methods can be easily modified to add the moving mesh as an option. Numerical examples are given that illustrate the improved accuracy of Godunov's and Roe's methods on a self-adjusting mesh. Previously announced in STAR as N83-15008

Harten, A.↗

Motion and decay of vortex rings submerged in a rotational flow

The interaction between vortex rings of finite strength and an axisymmetric rotational background flow is studied by a singular perturbation method, because it is difficult to use a finite-difference method to analyze the viscous decay in the small core of a vortex ring. The analysis is carried out by combining a composite solution of a vortex ring and an unsteady Euler solution for the background rotational flow. Using the method of averaging, a numerical scheme is developed to obtain an Euler solution in which the grid and time-step sizes depend solely on the length and velocity scales of the background flow. Numerical results are presented to illustrate the interaction between the trajectories and decay rates of the vortex rings and the background rotational flow.

Ishii, K.↗

Interaction of a decaying vortex ring with a rotational background flow bounded by a solid wall

The interaction between a vortex ring of finite strength and an axisymmetric rotational background flow bounded by a solid wall is studied by a singular perturbation method. The analysis is carried out by combining a composite solution of a vortex ring and an unsteady Navier-Stokes solution for the background rotational flow. Using the method of averaging, numerical scheme is developed to obtain a Navier-Stokes solution in which the grid and time-step sizes depend solely on the length and velocity scales of the background flow. Numerical results are presented to illustrate the separation of the boundary layer on a solid wall and its interaction with the vortex ring.

Ishii, K.↗

A finite difference-time domain technique for modeling narrow apertures in conducting scatterers

The finite difference-time domain (FDTD) technique has proven to be a valuable tool for the calculation of the transient and steady state scattering characteristics of relatively complex scatterer and source configurations. In spite of its usefulness, it exhibits serious deficiencies when used to analyze geometries that contain fine detail. An FDTD technique is described that utilizes Babinet's principle to decouple the regions on both sides of the aperture. The result is an FDTD technique that is capable of modeling apertures that are much smaller than the spatial grid used in the analysis and yet is not perturbed by numerical noise when used in the 'scattered field' mode. Numerical results are presented that show the field penetration through cavity-backed apertures that are much smaller than the spatial grid used during the solution.

Demarest, Kenneth R.↗

Some numerical and physical aspects of unsteady Navier-Stokes computations over airfoils using dynamic meshes

An upwind-biased implicit approximate factorization algorithm is applied to several unsteady flows on dynamic meshes. The thin-layer form of the compressible Navier-Stokes equations is used to solve both laminar and turbulent flows over airfoils pitching about the quarter chord. Numerical aspects of the solutions are investigated, including grid and time step effects. Two methods for determining fluxes - flux-vector splitting and flux-difference splitting - are compared. Flux-difference splitting predicts results more accurately than flux-vector splitting on a coarse mesh, but both methods agree on a fine mesh. Physical aspects of the computations are also examined. An equilibrium turbulent boundary layer model computes generally better unsteady results in comparison with experiment than a nonequilibrium model for the transonic case analyzed. Also, the size and location of the primary shed vortex for an airfoil pitching up at a constant rate is calculated in good agreement with experiment for two pitch rates.

Rumsey, Christopher L.↗

Numerical simulation of vortex unsteadiness on slender bodies of revolution at large incidence

Time-accurate, fine-grid Navier-Stokes solutions were obtained for flow over a slender ogive-cylinder body of revolution at angles of attack ranging from 10 deg to 40 deg. The results indicate the progressive growth of crossflow separation and the development of the leeward side vortex pattern with increasing incidence. The computed flows show good agreement with experimental measurements. As the angle of attack was increased, the flows become less damped, and at 40 deg a nonsteady flow exhibiting self-sustained fluctuations was observed. The nonsteadiness was linked to the presence of small-scale three-dimensional vortices moving along the primary surfaces of crossflow separation. The behavior of the fluctuations with incidence parallels the trend observed in experiments.

Schiff, Lewis B.↗

Numerical simulation of high-incidence flow over the F-18 fuselage forebody

As part of the NASA High Alpha Technology Program, fine-grid Navier-Stokes solutions have been obtained for flow over the fuselage forebody and wing leading-edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex and exhibit cross-flow separation from the sides of the forebody and from the leading-edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high-Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗

Finite element computation of hypersonic flow past a complete body

The finite element method was applied to compressible flows past complete blunt bodies in a first attempt to use the method to model hypersonic flow past re-entry vehicles. A Runge-Kutta time marching scheme was utilized and was found to adequately handle the bow shock and downstream wake. Adaptive refinement was successively applied to the flow field grid, and improvement in solution accuracy was observed. The results reported in this paper include the flow past a circular cylinder at Mach 3, and the flow in the plane of symmetry for the flow past a sphere at Mach 10.

Hommel, Mark↗

Temporally and spatially resolved flow in a two-stage axial compressor. Part 2: Computational assessment

Fluid dynamics of turbomachines are complicated due to aerodynamic interactions between rotors and stators. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. The current study uses an unsteady, thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodynamics of a multi-stage compressor. Relative motion between rotors and stators is made possible by use of systems of patched and overlaid grids. Results have been computed for a 2 1/2-stage compressor configuration. The numerical data compares well with experimental data for surface pressures and wake data. In addition, the effect of grid refinement on the solution is studied.

Gundy-Burlet, Karen L.↗

Physical considerations governing computation of turbulent flows over bodies at large incidence

The physical aspects governing accurate numerical simulation of turbulent flows having large regions of crossflow separation are re-examined. Time-accurate, three-dimensional fine-grid Navier-Stokes solutions were obtained for turbulent subsonic and supersonic flows over a slender ogive-cylinder body of revolution at large angles of attack. These flowfields are complex and contain regions of crossflow separation and an organized leeward-side vortex structure. An algebraic eddy-viscosity turbulence model has been modified to correctly account for the effects of the vortices on the underlying viscous layers. The numerical results show that the vortical flow structure of both subsonic and supersonic high incidence flows are similar, and can be accurately treated by the turbulence model. As the angle of attack is increased, the effectiveness of the model increases since the influence of the vortices on the underlying boundary layer decreases.

Degani, David↗

Effect of artificial viscosity on three-dimensional flow solutions

Artificial viscosity is added either implicitly or explicitly in practically every numerical scheme for suppressing spurious oscillations in the solution of fluid dynamics equations. In the present central-difference scheme, artificial viscosity is added explicitly for suppressing high frequency oscillations and achieving good convergence properties. The amount of artificial viscosity added is controlled through the use of pre-selected coefficients. In the standard scheme, scalar coefficients based on the spectral radii of the Jacobian of convective fluxes are used. However, this can add too much viscosity to the slower waves. Hence, use the matrix-valued coefficients, which give appropriate viscosity for each wave component is suggested. With the matrix-valued coefficients, the central-difference scheme produces more accurate solutions on a given grid, particularly in the vicinity of shocks, while still maintaining good convergence properties.

Turkel, Eli↗

State-of-the-art surveys on computational mechanics

Topics considered include advances in finite difference techniques for computational fluid dynamics, the spectral element methods for the incompressible Navier-Stokes equations, a review of recent developments in time integration, and advances and trends in element-by-element techniques. Also examined are the algebraic multigrid methods applied to problems in computational structural mechanics, grid generation for the solution of partial differential equations, advances in adaptive improvements, and new computing systems and their impact on computational mechanics.

Noor, Ahmed K.↗

Numerical simulation of F-18 fuselage forebody flows at high angles of attack

Fine-grid Navier-Stokes solutions were obtained for flow over the fuselage forebody and wing leading edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex, and exhibit cross flow separation from the sides of the forebody and from the leading edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗

Unstructured-grid methods development: Lessons le arned

The development is summarized of unstructured grid methods for the solution of the equations of fluid flow and some of the lessons learned are shared. The 3-D Euler equations are solved, including spatial discretizations, temporal discretizations, and boundary conditions. An example calculation with an upwind implicit method using a CFL (Courant Friedricks Lewy) number of infinity is presented for the Boeing 747 aircraft. The results obtained in less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the present capability.

Batina, John T.↗

Temporally and spatially resolved flow in a two-stage axial compressor. II - Computational assessment

Fluid dynamics of turbomachines are complicated due to aerodynamic interactions between rotors and stators. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. The current study uses an unsteady, thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodyamics of a multistage compressor. Relative motion between rotors and stators is made possible by use of systems of patched and overlaid grids. Results have been computed for a 2 1/2-stage compressor configuration. The numerical data compares well with experimental data for surface pressures and wake data. In addition, the effect of grid refinement on the solution is studied.

Gundy-Burlet, K. L.↗