Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The optical and X-ray content of the 1992 May 1 gamma-ray burst error box

A gamma-ray burst which occurred on 1992 May 1 was observed by three spacecraft in the third interplanetary network, and rapidly localized to a small error box. The coordinates were promptly circulated to a wide astronomical community, and radio, optical, and X-ray counterpart searches were carried out. A weak X-ray source was found in the error box, and two radio sources are discovered outside the error box, but in alignment with the X-ray source. The X-ray source position contains approximately 25 optical objects down to 23d magnitude. We discuss the prospects for identifying the burster counterpart.

Hurley, K.↗
NASA NTRS1994

Observations of geographically correlated orbit errors for TOPEX/Poseidon using the global positioning system

We have compared Global Positioning System (GPS)-based dynamic and reduced-dynamic TOPEX/Poseidon orbits over three 10-day repeat cycles of the ground-track. The results suggest that the prelaunch joint gravity model (JGM-1) introduces geographically correlated errors (GCEs) which have a strong meridional dependence. The global distribution and magnitude of these GCEs are consistent with a prelaunch covariance analysis, with estimated and predicted global rms error statistics of 2.3 and 2.4 cm rms, respectively. Repeating the analysis with the post-launch joint gravity model (JGM-2) suggests that a portion of the meridional dependence observed in JGM-1 still remains, with global rms error of 1.2 cm.

Christensen, E. J.↗
NASA NTRS1993

Error modeling for GPS geodetic applications

An extensive investigation was conducted to provide realistic error models for Global Positioning System (GPS) related numerical simulation. This study considers most of the important error sources for measurement and dynamic models which are currently being used for GPS geodetic applications. These error models were evaluated by comparing with real GPS data.

Rim, Hyung Jin↗
NASA NTRS1994

A method for correcting aspect solution errors in ROSAT HRI observations of compact sources

X-ray point sources observed with the ROSAT High Resolution Imager (HRI) often appear elongated over scales of approximately 5 sec-10 sec from the image core. This elongation has been attributed to errors in the attitude correction as the satellite is wobbled during the observations, and affects sources with both soft and hard X-ray spectra. In this paper, I report the results of an attempt to rid a high signal-to-noise observation of the soft X-ray point source HZ 43 of its characteristic elongation. I divided the observation into 181 separate images, each containing photons from only a small region on the detector through which the source passed during the satellite's wobble. By measuring the positions of the individual image centroids, I found clear evidence for systematic offsets from a common mean by up to approximately +/- 3 sec in both right ascension and declination as a function of phase in the satellite wobble. Shifting the subimages to a common center and then restacking them into a single image measurably improved the symmetry of the point-spread function. HRI observations are wobbled primarily to smooth out variations in the pixel-to-pixel sensitivity of the detector and also to extend the lifetime of the microchannel plates in the detector since these decay at a given location as a function of the number of photons detected. However, the elongations introduced by the aspect errors inhibit the identification of possible extended X-ray emission associated with sources such as pulsars and active galactic nuclei. In light of these results, I suggest that until the aspect errors are understood, observations of compact sources, where this effect may be important, should not be wobbled.

Morse, Jon A.↗
NASA NTRS1995

Error in predicting hydrosol backscattering from remotely sensed reflectance

Monte Carlo simulations are carried out to determine the error in the inversion of backscattering from remotely sensed reflectance when geometrical shape factors of the light field are assumed to be unity. The results show that error in backscattering inversion can vary from a 40% overestimation to a 20% underestimation and is dependent on the solar angle and the hydrosol consituents contributing to backscattering. The simulations also demostrate that for chlorophyll concentrations ranging from 0.05 to 20 mg/cu m the most dramatic change in the geometrical shape factors occurs near 1.0 to 1.5 mg/cu m chlorophyll. The potential importance of bacteria in influencing the shape factor and the subsequent effect of bacteria on the retrieval of the backscattering from remote sensing reflectance are shown. Quartzlike material's strong impact on geometrical shape factors and errors of retrieval of backscattering at low chlorophyll concentrations are also demonstrated. Remote sensing reflectance inversion schemes must include information about the backscattering function to be successful.

Weidemann, A. D.↗
NASA NTRS1995

Image data compression having minimum perceptual error

A method for performing image compression that eliminates redundant and invisible image components is described. The image compression uses a Discrete Cosine Transform (DCT) and each DCT coefficient yielded by the transform is quantized by an entry in a quantization matrix which determines the perceived image quality and the bit rate of the image being compressed. The present invention adapts or customizes the quantization matrix to the image being compressed. The quantization matrix comprises visual masking by luminance and contrast techniques and by an error pooling technique all resulting in a minimum perceptual error for any given bit rate, or minimum bit rate for a given perceptual error.

Watson, Andrew B.↗
NASA NTRS1995

Polarization errors associated with birefringent waveplates

Although zero-order quartz waveplates are widely used in instrumentation that needs good temperature and field-of-view characteristics, the residual errors associated with these devices can be very important in high-resolution polarimetry measurements. How the field-of-view characteristics are affected by retardation errors and the misalignment of optic axes in a double-crystal waveplate is discussed. The retardation measurements made on zero-order quartz and single-order 'achromatic' waveplates and how the misalignment errors affect those measurements are discussed.

West, Edward A.↗
NASA NTRS1996

Reducing On-Board Computer Propagation Errors Due to Omitted Geopotential Terms by Judicious Selection of Uploaded State Vector

Several future, and some current missions, use an on-board computer (OBC) force model that is very limited. The OBC geopotential force model typically includes only the J(2), J(3), J(4), C(2,2) and S(2,2) terms to model non-spherical Earth gravitational effects. The Tropical Rainfall Measuring Mission (TRMM), Wide-field Infrared Explorer (WIRE), Transition Region and Coronal Explorer (TRACE), Submillimeter Wave Astronomy Satellite (SWAS), and X-ray Timing Explorer (XTE) all plan to use this geopotential force model on-board. The Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) is already flying this geopotential force model. Past analysis has shown that one of the leading sources of error in the OBC propagated ephemeris is the omission of the higher order geopotential terms. However, these same analyses have shown a wide range of accuracies for the OBC ephemerides. Analysis was performed using EUVE state vectors that showed the EUVE four day OBC propagated ephemerides varied in accuracy from 200 m. to 45 km. depending on the initial vector used to start the propagation. The vectors used in the study were from a single EUVE orbit at one minute intervals in the ephemeris. Since each vector propagated practically the same path as the others, the differences seen had to be due to differences in the inital state vector only. An algorithm was developed that will optimize the epoch of the uploaded state vector. Proper selection can reduce the previous errors of anywhere from 200 m. to 45 km. to generally less than one km. over four days of propagation. This would enable flight projects to minimize state vector uploads to the spacecraft. Additionally, this method is superior to other methods in that no additional orbit estimates need be done. The definitive ephemeris generated on the ground can be used as long as the proper epoch is chosen. This algorithm can be easily coded in software that would pick the epoch within a specified time range that would minimize the OBC propagation error. This techniques should greatly improve the accuracy of the OBC propagation on-board future spacecraft such as TRMM, WIRE, SWAS, and XTE without increasing complexity in the ground processing.

Greatorex, Scott↗
NASA NTRS1996

Communications and information research: Improved space link performance via concatenated forward error correction coding

With the development of new advanced instruments for remote sensing applications, sensor data will be generated at a rate that not only requires increased onboard processing and storage capability, but imposes demands on the space to ground communication link and ground data management-communication system. Data compression and error control codes provide viable means to alleviate these demands. Two types of data compression have been studied by many researchers in the area of information theory: a lossless technique that guarantees full reconstruction of the data, and a lossy technique which generally gives higher data compaction ratio but incurs some distortion in the reconstructed data. To satisfy the many science disciplines which NASA supports, lossless data compression becomes a primary focus for the technology development. While transmitting the data obtained by any lossless data compression, it is very important to use some error-control code. For a long time, convolutional codes have been widely used in satellite telecommunications. To more efficiently transform the data obtained by the Rice algorithm, it is required to meet the a posteriori probability (APP) for each decoded bit. A relevant algorithm for this purpose has been proposed which minimizes the bit error probability in the decoding linear block and convolutional codes and meets the APP for each decoded bit. However, recent results on iterative decoding of 'Turbo codes', turn conventional wisdom on its head and suggest fundamentally new techniques. During the past several months of this research, the following approaches have been developed: (1) a new lossless data compression algorithm, which is much better than the extended Rice algorithm for various types of sensor data, (2) a new approach to determine the generalized Hamming weights of the algebraic-geometric codes defined by a large class of curves in high-dimensional spaces, (3) some efficient improved geometric Goppa codes for disk memory systems and high-speed mass memory systems, and (4) a tree based approach for data compression using dynamic programming.

Rao, T. R. N.↗
NASA NTRS1996

Studies of Error Sources in Geodetic VLBI

Achieving the goal of millimeter uncertainty in three dimensional geodetic positioning on a global scale requires significant improvement in the precision and accuracy of both random and systematic error sources. For this investigation we proposed to study errors due to instrumentation in Very Long Base Interferometry (VLBI) and due to the atmosphere. After the inception of this work we expanded the scope to include assessment of error sources in GPS measurements, especially as they affect the vertical component of site position and the measurement of water vapor in the atmosphere. The atmosphere correction 'improvements described below are of benefit to both GPS and VLBI.

Rogers, A. E. E.↗
NASA NTRS1960

Investigation of the Errors of an Inertial Guidance System during Satellite Re-Entry

During the re-entry phase of a manned satellite, some equipment for continuous on-board indication of position will be required. Since radio and radar may be useless during part of the re-entry, inertial guidance equipment may be required. Such equipment, however, has an inherent instability in the computation of altitude. The present study of an inertial guidance system shows that for reasonable values of initial-condition errors and equipment biases. the resultant position indication errors will not become excessive unless the re-entry maneuver time is greater than 45 minutes to an hour. Further, the position indication error caused by accelerometer uncertainties can be reduced by switching off the accelerometers until their output becomes significantly greater than their uncertainty.

White, John S.↗
NASA NTRS1998

Galaxy Cluster Shapes and Systematic Errors in H_0 as Determined by the Sunyaev-Zel'dovich Effect

Imaging of the Sunyaev-Zeldovich (SZ) effect in galaxy clusters combined with cluster plasma x-ray diagnostics promises to measure the cosmic distance scale to high accuracy. However, projecting the inverse-Compton scattering and x-ray emission along the cluster line-of-sight will introduce systematic error's in the Hubble constant, H_0, because the true shape of the cluster is not known. In this paper we present a study of the systematic errors in the value of H_0, as determined by the x-ray and SZ properties of theoretical samples of triaxial isothermal "beta-model" clusters, caused by projection effects and observer orientation relative to the model clusters' principal axes. We calculate three estimates for H_0 for each cluster, based on their large and small apparent angular core radii, and their arithmetic mean. We average the estimates for H_0 for a sample of 25 clusters and find that the estimates have limited systematic error: the 99.7% confidence intervals for the mean estimated H_0 analyzing the clusters using either their large or mean angular core r;dius are within 14% of the "true" (assumed) value of H_0 (and enclose it), for a triaxial beta model cluster sample possessing a distribution of apparent x-ray cluster ellipticities consistent with that of observed x-ray clusters.

Sulkanen, Martin E.↗
NASA NTRS1999

Sensitivity of Force Specifications to the Errors in Measuring the Interface Force

Force-Limited Random Vibration Testing has been applied in the last several years at NASA/GSFC for various programs at the instrument and system level. Different techniques have been developed over the last few decades to estimate the dynamic forces that the test article under consideration will encounter in the operational environment. Some of these techniques are described in the handbook, NASA-HDBK-7004, and the monograph, NASA-RP-1403. A key element in the ability to perform force-limited testing is multi-component force gauges. This paper will show how some measurement and calibration errors in force gauges are compensated for w en tie force specification is calculated. The resulting notches in the acceleration spectrum, when a random vibration test is performed, are the same as the notches produced during an uncompensated test that has no measurement errors. The paper will also present the results of tests that were used to validate this compensation. Knowing that the force specification can compensate for some measurement errors allows tests to continue after force gauge failures or allows dummy gauges to be used in places that are inaccessible.

Worth, Daniel↗
NASA NTRS1998

Cascade Error Projection with Low Bit Weight Quantization for High Order Correlation Data

In this paper, we reinvestigate the solution for chaotic time series prediction problem using neural network approach. The nature of this problem is such that the data sequences are never repeated, but they are rather in chaotic region. However, these data sequences are correlated between past, present, and future data in high order. We use Cascade Error Projection (CEP) learning algorithm to capture the high order correlation between past and present data to predict a future data using limited weight quantization constraints. This will help to predict a future information that will provide us better estimation in time for intelligent control system. In our earlier work, it has been shown that CEP can sufficiently learn 5-8 bit parity problem with 4- or more bits, and color segmentation problem with 7- or more bits of weight quantization. In this paper, we demonstrate that chaotic time series can be learned and generalized well with as low as 4-bit weight quantization using round-off and truncation techniques. The results show that generalization feature will suffer less as more bit weight quantization is available and error surfaces with the round-off technique are more symmetric around zero than error surfaces with the truncation technique. This study suggests that CEP is an implementable learning technique for hardware consideration.

Duong, Tuan A.↗
NASA NTRS1999

A Posteriori Error Estimation for Discontinuous Galerkin Approximations of Hyperbolic Systems

This article considers a posteriori error estimation of specified functionals for first-order systems of conservation laws discretized using the discontinuous Galerkin (DG) finite element method. Using duality techniques, we derive exact error representation formulas for both linear and nonlinear functionals given an associated bilinear or nonlinear variational form. Weighted residual approximations of the exact error representation formula are then proposed and numerically evaluated for Ringleb flow, an exact solution of the 2-D Euler equations.

Larson, Mats G.↗
NASA NTRS2001

The Vertical Error Characteristics of GOES-derived Winds: Description and Impact on Numerical Weather Prediction

Errors in the height assignment of some satellite-derived winds exist because the satellites sense radiation emitted from a finite layer of the atmosphere rather than a specific level. Potential problems in data assimilation may arise because the motion of a measured layer is often represented by a single-level value. In this research, cloud and water vapor motion winds that are derived from the Geostationary Operational Environmental Satellites (GOES winds) are compared to collocated rawinsonde observations (RAOBs). An important aspect of this work is that in addition to comparisons at each assigned height, the GOES winds are compared to the entire profile of the collocated RAOB data to determine the vertical error characteristics of the GOES winds. The impact of these results on numerical weather prediction is then investigated. The comparisons at individual vector height assignments indicate that the error of the GOES winds range from approx. 3 to 10 m/s and generally increase with height. However, if taken as a percentage of the total wind speed, accuracy is better at upper levels. As expected, comparisons with the entire profile of the collocated RAOBs indicate that clear-air water vapor winds represent deeper layers than do either infrared or water vapor cloud-tracked winds. This is because in cloud-free regions the signal from water vapor features may result from emittance over a thicker layer. To further investigate characteristics of the clear-air water vapor winds, they are stratified into two categories that are dependent on the depth of the layer represented by the vector. It is found that if the vertical gradient of moisture is smooth and uniform from near the height assignment upwards, the clear-air water vapor wind tends to represent a relatively deep layer. The information from the comparisons is then used in numerical model simulations of two separate events to determine the forecast impacts. Four simulations are performed for each case: 1) A control simulation that assimilates no satellite wind data, 2) assimilation of all GOES winds according to their assigned single level height, 3) assimilation of all GOES winds spread over multiple levels, and 4) assimilation of all GOES winds spread over multiple levels, but with variations in the vertical influence of clear-air water vapor winds based on the moisture profile in the model. In the first case, a strong mid-latitude cyclone is present and the use of the satellite data results in improved storm tracks during the initial approx. 36 h forecast period. This is because the satellite data improves the analysis of the environment into which the storm progresses. Statistics for mean wind vector and height differences show that, with the exception of the height field at later times in the first case, the use of GOES winds improves the simulation with time. The simulation results suggest that it is beneficial to spread the GOES wind information over multiple levels, particularly when the moisture profile is used to define the vertical influence.

Rao, P. Anil↗
NASA NTRS2001

Evaluating Manufacturing and Assembly Errors in Rotating Machinery to Enhance Component Performance

Manufacturing and assembly phases play a crucial role in providing products that meet the strict functional specifications associated with rotating machinery components. The errors resulting during the manufacturing and assembly of such components are correlated with the vibration and noise emanating from the final system during its operational lifetime. Vibration and noise are especially unacceptable elements in high-risk systems such as helicopters, resulting in premature component degradation and an unsafe flying environment. In such applications, individual components often are subject to 100% inspection prior to assembly, as well as during operation through rigorous maintenance, resulting in increased product development cycles and high production and operation costs. In this work, we focus on providing designers and manufacturing engineers with a technique to evaluate vibration modes and levels for each component or subsystem prior to putting them into operation. This paper presents a preliminary investigation of the correlation between vibrations and manufacturing and assembly errors using an experimental test rig, which simulates a simple bearing and shaft arrangement. A factorial design is used to study the effects of: 1) different manufacturing instances; 2) different assembly instances; and, 3) varying shaft speeds. The results indicate a correlation between manufacturing or assembly errors and vibrations measured from accelerometers. Challenges in developing a tool for DFM are identified, followed by a discussion of future work, including a real-world application to helicopter transmission vibrations.

Tumer, Irem Y.↗
NASA NTRS2001

The Effect of Errors in Snow Assimilation on Land Surface Modeling

The accurate portrayal of the hydrological cycle is extremely important in land surface modeling. Central to this effort is the treatment of snow, as errors in the representation of this quantity can impact practically all other modeled quantities through alterations in the water and energy balances. Although land surface model (LSM) simulations can benefit from the assimilation of snow cover and snow depth observations, they can be negatively impacted if such observations contain errors or if a model bias exists in the simulation of surface or soil temperatures. Both cases may lead to excessive melting or growth of snow packs, and to large alterations in both the energy and water balances. Such problems in the snow assimilation process, made evident by the repeated melting and replenishing of snow pack over significant areas of the United States, exists in the Eta Data Assimilation System and is a product of the EDAS system's direct insertion assimilation of snow data. Occurring on a 24 hour cycle, the repeated melting infuses the soil column with a large quantity of water that upsets the hydrological cycle. In an effort to quantify the impacts of such errors in snow assimilation on water and energy budgets, a series of Mosaic LSM simulations were performed over the 12 month period covering October 1998 to October 1999.

Cosgrove, Brian A.↗