SEARCH · Engineering Papers

Results for “ensemble modeling system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Downwind control of oceanic air by land: the land wake and its sensitivity to CO 2

Oceans are well-known to be directly altered by global climate forcings such as greenhouse gas changes, but how oceans are indirectly influenced by land and its response to such forcings remains less explored. Here, we assess the present-day and projected future state of a little-explored feature of the climate system—a 'land wake' in relative humidity downwind of the east coast of North America, consisting of low-humidity continental air extending roughly 1000 km over the Atlantic ocean. The wake exists throughout the year, but is supported by high continental temperatures in summer and low continental moisture in winter. The wake is well represented in an ensemble of global climate models (GCMs), qualitatively matching reanalysis data. Under increasing atmospheric CO 2 , the land wake intensifies in GCM simulations through two pathways: the radiative effects of CO 2 on surface temperatures, and the biogeochemical effect of CO 2 on terrestrial vegetation. Vegetation responses to increased CO 2 alter the summer wake from Florida to Newfoundland, and both the radiative and biogeochemical effects of CO 2 drive reductions in coastal cloud cover. These changes illustrate the potential of rapidly changing terrestrial climate to influence coastal regions and the ocean environment downwind of continents through both light conditions and the energy balance of the surface ocean.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2026

South Asian Monsoon Response to Regional Aerosol Emission Reductions: Insights From RAMIP

Anthropogenic aerosol and associated precursor gas emissions are already declining in many regions and are likely to decline significantly by 2050, with major implications for regional climate. Unlike greenhouse gases, aerosol impacts are spatially heterogeneous and can influence climate both near emission sources and through remote teleconnections. This is particularly important for the South Asian monsoon system, where both local and remote aerosol changes can significantly affect precipitation patterns. Using simulations from the Regional Aerosol Model Intercomparison Project, we examine how local and remote aerosol emission reductions influence South Asian climate across both pre-monsoon and monsoon seasons, including weakening of the elevated heat pump (EHP) mechanism during pre-monsoon months. Our analysis employs 10-member ensembles from 10 CMIP6-era models to compare three experiments with global, South Asian, and East Asian aerosol reductions relative to a high-emission baseline (SSP3-7.0). This experimental design allows us to isolate and quantify the distinct impacts of regional emission changes. Results reveal that global aerosol reductions produce a larger all-India precipitation increase (+0.28 mm day −1 ) than South Asian reductions alone (+0.19 mm day −1 ), with the strongest regional responses over the northern Bay of Bengal, the Western Ghats and Indo-Gangetic Plains. East Asian reductions show uncertain but modest precipitation reductions of 0.2-0.6 mm day −1 over parts of west-central and eastern Indian regions. Pre-monsoon carbonaceous aerosol reductions systematically weaken the EHP, cooling the mid-troposphere over the Himalayan foothills by up to 0.4 K and producing localised anomalous descent that opposes the climatological pre-monsoon ascent. Substantial inter-model diversity exists in the spatial patterns and magnitudes of these responses, highlighting key uncertainties in aerosol–monsoon interactions. The South Asian precipitation response is driven by enhanced land–sea thermal contrast, while the pre-monsoon EHP weakening is attributable exclusively to local South Asian carbonaceous aerosol forcing rather than remote teleconnections. These findings have direct implications for air quality and climate adaptation planning across South Asia as regional aerosol emissions diverge under different development pathways.

cmip6↗

NASA NTRS2018

Impact of Satellite Sea Surface Salinity Observations on ENSO Predictions from the GMAO S2S Forecast System

Sea surface salinity (SSS) observations from space allow us to investigate if improved estimates of near-surface density stratification and associated mixing can positively impact seasonal to interannual variability of tropical Pacific Ocean dynamics as well as dynamical ENSO forecasts. For the first part of the presentation, we utilize our intermediate-complexity coupled model. Baseline experiments assimilate satellite sea level (multi-satellite gridded AVISO, 2013), SST (Reynolds et al., 2004), and in situ subsurface temperature and salinity observations (GTSPP NODC, 2006). These baseline experiments are then compared with experiments that additionally assimilate Aquarius (V5.0 Lilly and Lagerloef, 2008) and SMAP (V4.0 Fore et al., 2016) SSS. Twelve-month forecasts are initialized for each month from September 2011 to September 2017. For initialization of the coupled forecast, the positive impact of SSS assimilation is brought about by surface freshening near the eastern edge of the western Pacific warm pool and density changes that lead to shallower mixed layer between 10S-5N. This pattern enhances air/sea interaction and amplifies the equatorial Kelvin wave signal. We find that including satellite SSS significantly improves NINO3.4 sea surface temperature anomaly validation over most forecast lead times. We next assess how different satellite SSS products impact the validation of ENSO forecasts. SMAP V4 reduces the salty bias in the western Pacific and so is an improvement upon SMAP V2 and SMOS V2 (Boutin et al., 2017) has similar validation characteristics as a combination of Aquarius and SMAP V4. Next we shift to present results from the NASA GMAO Sub-seasonal to seasonal (S2S_v2.1) production coupled model (i.e. the same model that contributes ENSO forecasts to the North American Multi-Model Ensemble Experiment). From March to June 2015, the availability of two overlapping satellite SSS instruments, Aquarius and SMAP, allows a unique opportunity to compare and contrast forecasts initialized with the benefit of these two satellite SSS observation types. We assess the impact of satellite sea surface salinity (SSS) observations on dynamical ENSO forecasts for the big 2015 El Nino event. We will present distinct experiments for the overlap period that include 1) freely evolving SSS (i.e. no satellite SSS as the production system), 2) Aquarius, and 3) SMAP initialization. Our results show that using Aquarius slightly improves validation of the reanalysis (including sea level and temperature statistics). Our production system without SSS assimilation generated too warm forecasts for the 2015 El Nino from March initial conditions. Incorporating Aquarius into initialization of the coupled system leads to a deeper, more realistic MLD that acts to damp the downwelling Kelvin signal and slightly cool NINO3.4 SST. With Aquarius the forecasts better match the observed amplitude of the 2015 event. On the other hand, SMAP V2 relaxation generally degrades validation statistics. At forecast initialization, SMAP is much too salty within 10o of the equator, leading to deeper MLD east of 165W. This deeper MLD leads to over-damping of the downwelling signal (i.e. relative upwelling), in turn leading to relatively too cool ENSO forecasts.

Hackert, E.↗

NASA NTRS2022

Uncertainty Models for the Hybrid Parametric Variation Method of Uncertainty Quantification; Analysis

There is some level of uncertainty in every finite element model (FEM), which flows to a level of uncertainty in predicted results. The purpose of uncertainty quantification (UQ) is to provide statistical bounds on prediction accuracy based on model uncertainty. This is distinct from model updating, which attempts to modify models to improve their accuracy. UQ does not improve the accuracy of models, but accepts that the models are inherently inaccurate and attempts to quantify the impact of that inaccuracy on predicted results. Previously, an alternate method for UQ, called the Hybrid Parametric Variation (HPV) method, was applied to Space Launch System (SLS) Hurty/Craig-Bampton (HCB) components to predict system-level statistics for launch vehicle attitude control transfer functions and core stage section loads due to buffet. The HPV method combines a parametric variation of the HCB fixed-interface (FI) modal frequencies with a nonparametric variation (NPV) method that randomly varies the HCB mass and stiffness matrices as Wishart random matrix distributions using random matrix theory (RMT). Alternatively, the most common method for modeling uncertainty in the structural dynamics community is a parametric approach, which varies physical parameters in the model. However, there are several disadvantages associated with the parametric method. Determining a reduced set of parameters that have a significant impact on the system response can be time consuming, and the selected parameter probability distributions are rarely reliably known. Therefore, in practice, the parameters are surrogates for the actual errors, and the link to parameter uncertainty is unknown. Another major drawback is that the uncertainty that can be represented is limited to the form of the nominal FEM. It is the experience of the authors that based on numerous aerospace programs, almost all FEM errors are in form rather than parameter values. This hypothesis is supported by the observation of the authors that it is almost never possible to ‘tune’ a FEM to match modal test results by only modifying model parameters. Model-form uncertainty cannot be directly represented by FEM input parameters nor included in a parametric approach. However, model-form uncertainty can be modeled using RMT, where a probability distribution is developed for the matrix ensemble of interest. The major advantage of the NPV method is that it covers errors in model form. The HPV method anchors uncertainty at the HCB component level to component modal test results by matching the HCB and test modes based on mode descriptions or other methods, and then applying differing levels of frequency variation. The specific variations depend on the confidence to which a component FEM has been validated through modal testing. The NPV method is layered on the frequency variation to match modal test self-orthogonality and cross-orthogonality (XO) results. Once the component uncertainty models are identified, they are assembled, and the uncertainty is propagated to the system level using a Monte Carlo (MC) analysis approach that generates statistics for system-level predictions This provides a UQ method that can be traced to test data, which can be updated as additional data and improved correlated models become available. The purpose of this paper is to collect and present all of the theory for HPV that has been previously published in reports and papers and to present examples of its application. Specifically, component uncertainty models based on the dispersion of corresponding mass and stiffness matrices using proposed test/analysis correlation metrics are investigated. The first example is purely academic so that the true answers are known, and the validity of the HPV method and the corresponding uncertainty models can be determined. The purpose of this paper is to collect and present all of the theory for HPV that has been previously published in reports and papers and to present examples of its application. Specifically, component uncertainty models based on the dispersion of corresponding mass and stiffness matrices using proposed test/analysis correlation metrics are investigated. The first example is purely academic so that the true answers are known, and the validity of the HPV method and the corresponding uncertainty models can be determined. The second example is an application to a component that is design specific to the SLS. Based on this work and other assessments, the HPV method provides another tool to the toolset used for complex system UQ analysis. From experience gathered to date using the HPV method, additional design specific applications must be investigated to provide further confidence in the validity of the HPV method of UQ analysis.

Uncertainty quantification↗

DOE OSTI2024

ETHOS: An automated framework to generate multi-fidelity constitutive data tables and propagate uncertainties to hydrodynamic simulations

Accurate constitutive data, such as equations of state and plasma transport coefficients, are necessary for reliable hydrodynamic simulations of plasma systems such as fusion targets, planets, and stars. Here, we develop a framework for automatically generating transport-coefficient tables using a parameterized model that incorporates data from both high-fidelity sources (e.g., density functional theory calculations and reference experiments) and lower-fidelity sources (e.g., average-atom and analytic models). The framework incorporates uncertainties from these multi-fidelity sources, generating ensembles of optimally diverse tables that are suitable for uncertainty quantification of hydrodynamic simulations. We illustrate the utility of the framework with magnetohydrodynamic simulations of magnetically launched flyer plates, which are used to measure material properties in pulsed-power experiments. We explore how changes in the uncertainties assigned to the multi-fidelity data sources propagate to changes in simulation outputs and find that our simulations are most sensitive to uncertainties near the melting transition. The presented framework enables computationally efficient uncertainty quantification that readily incorporates new high-fidelity measurements or calculations and identifies plasma regimes where additional data will have high impact.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Twenty-first century hydroclimate: A continually changing baseline, with more frequent extremes

Variability in hydroclimate impacts natural and human systems worldwide. In particular, both decadal variability and extreme precipitation events have substantial effects and are anticipated to be strongly influenced by climate change. From a practical perspective, these impacts will be felt relative to the continuously evolving background climate. Removing the underlying forced trend is therefore necessary to assess the relative impacts, but to date, the small size of most climate model ensembles has made it difficult to do this. Here we use an archive of large ensembles run under a high-emissions scenario to determine how decadal “megadrought” and “megapluvial” events—and shorter-term precipitation extremes—will vary relative to that changing baseline. When the trend is retained, mean state changes dominate: In fact, soil moisture changes are so large in some regions that conditions that would be considered a megadrought or pluvial event today are projected to become average. Time-of-emergence calculations suggest that in some regions including Europe and western North America, this shift may have already taken place and could be imminent elsewhere: Emergence of drought/pluvial conditions occurs over 61% of the global land surface (excluding Antarctica) by 2080. Relative to the changing baseline, megadrought/megapluvial risk either will not change or is slightly reduced. However, the increased frequency and intensity of both extreme wet and dry precipitation events will likely present adaptation challenges beyond anything currently experienced. In many regions, resilience against future hazards will require adapting to an ever-changing “normal,” characterized by unprecedented aridification/wetting punctuated by more severe extremes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Evaluation of dynamical downscaling in a fully coupled regional earth system model

A set of decadal simulations has been completed and evaluated for gains using the Regional Arctic System Model (RASM) to dynamically downscale data from a global Earth system model and two atmospheric reanalyses. RASM is a fully coupled atmosphere–land–ocean–sea ice regional Earth system model. Nudging to the forcing data is applied to approximately the top half of the atmospheric domain. RASM simulations were also completed with a modification to the atmospheric physics for evaluating changes to the modeling system. The results show that for the top half of the atmosphere, the RASM simulations follow closely to that of the forcing data, regardless of the forcing data. The results for the lower half of the atmosphere, as well as the surface, show a clustering of atmospheric state and surface fluxes based on the modeling system. At all levels of the atmosphere the imprint of the weather from the forcing data is present as indicated in the pattern of the annual means. Biases, in comparison to reanalyses, are evident in the Earth system model forced simulations for the top half of the atmosphere but are not present in the lower atmosphere. This suggests that bias correction is not needed for fully coupled dynamical downscaling simulations. While the RASM simulations tended to go to the same mean state for the lower atmosphere, there are a differences in the variability and changes of weather patterns across the ensemble of simulations. These differences in the weather result in variances in the sea ice and oceanic states.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1986

A two-dimensional numerical study of the flow inside the combustion chambers of a motored rotary engine

A numerical study was performed to investigate the unsteady, multidimensional flow inside the combustion chambers of an idealized, two-dimensional, rotary engine under motored conditions. The numerical study was based on the time-dependent, two-dimensional, density-weighted, ensemble-averaged conservation equations of mass, species, momentum, and total energy valid for two-component ideal gas mixtures. The ensemble-averaged conservation equations were closed by a K-epsilon model of turbulence. This K-epsilon model of turbulence was modified to account for some of the effects of compressibility, streamline curvature, low-Reynolds number, and preferential stress dissipation. Numerical solutions to the conservation equations were obtained by the highly efficient implicit-factored method of Beam and Warming. The grid system needed to obtain solutions were generated by an algebraic grid generation technique based on transfinite interpolation. Results of the numerical study are presented in graphical form illustrating the flow patterns during intake, compression, gaseous fuel injection, expansion, and exhaust.

Shih, T. I. P.↗

NASA NTRS1986

A two-dimensional numerical study of the flow inside the combustion chamber of a motored rotary engine

Shih, T. I-P.↗

DOE OSTI2024

Role of bath-induced many-body interactions in the dissipative phases of the Su-Schrieffer-Heeger model

The Su-Schrieffer-Heeger chain is a prototype example of a symmetry-protected topological insulator. Coupling it nonperturbatively to local thermal environments, either through the intercell or the intracell fermion tunneling elements, modifies the topological window. To understand this effect, we employ the recently developed reaction-coordinate polaron transform (RCPT) method, which allows treating system-bath interactions at arbitrary strengths. The effective system Hamiltonian, which is obtained via the RCPT, exposes the impact of the baths on the SSH chain through renormalization of tunneling elements and the generation of many-body interaction terms. By performing exact diagonalization and computing the ensemble geometric phase, a topological invariant, which is applicable even to systems at finite temperature, we distinguish the trivial band insulator (BI) from the topological insulator (TI) phases. Furthermore, through the RCPT mapping, we are able to pinpoint the main mechanism behind the extension of the parameter space for the TI or the BI phases (depending on the coupling scheme, intracell or intercell), which is the bath-induced, dimerized, many-body interaction. In conclusion, we also study the effect of on-site staggered potentials on the SSH phase diagram and discuss extensions of our method to higher dimensions.

1-dimensional systems↗

NASA NTRS2020

CMIP6 Historical Simulations (1850‐2014) with GISS‐E2.1

Simulations of the CMIP6 historical period 1850‐‐2014, characterized by the emergence of anthropogenic climate drivers like greenhouse gases, are presented for different configurations of the NASA Goddard Institute for Space Studies (GISS) Earth System ModelE2.1. The GISS‐E2.1 ensembles are more sensitive to forcing than their CMIP5 predecessors (GISS‐E2), but warm less during recent decades due to reduced total forcing. This forcing reduction is attributed to an increase in longwave opacity in pre‐industrial simulations, resulting in an atmosphere less sensitive to further increases in opacity that result from rising greenhouse gas concentrations. This demonstrates the importance of the base climatology to forcing and forced climate trends. Most model versions match observed temperature trends since 1979 from the ocean to the stratosphere. The choice of ocean model is important to the transient climate response, as found in CMIP5 GISS‐E2: the model that more efficiently exports heat to the deep ocean shows a smaller rise in tropospheric temperature. Model sea level rise over the historical period is traced to excessive drawdown of aquifers to meet irrigation demand with a smaller contribution from thermal expansion. This shows how fully coupled models can provide indirect observational constraints upon forcing, in this case, constraining irrigation rates with observed sea level changes. The overall agreement of GISS‐E2.1 with observed trends is familiar from evaluation of its predecessors, as is the conclusion that these trends are almost entirely anthropogenic in origin.

NASA Goddard Institute for Space Studies (GISS) Ea↗

NASA NTRS2023

Importance of Internal Variability for Climate Model Assessment

Benchmarking climate model simulations against observations of the climate is core to the process of building realistic climate models and developing accurate future projections. However, in many cases, models do not match historical observations, particularly on regional scales. If there is a mismatch between modeled and observed climate features, should we necessarily conclude that our models are deficient? Using several illustrative examples, we emphasize that internal variability can easily lead to marked differences between the basic features of the model and observed climate, even when decades of model and observed data are available. This can appear as an apparent failure of models to capture regional trends or changes in global teleconnections, or simulation of extreme events. Despite a large body of literature on the impact of internal variability on climate, this acknowledgment has not yet penetrated many model evaluation activities, particularly for regional climate. We emphasize that using a single or small ensemble of simulations to conclude that a climate model is in error can lead to premature conclusions on model fidelity. A large ensemble of multidecadal simulations is therefore needed to properly sample internal climate variability in order to robustly identify model deficiencies and convincingly demonstrate progress between generations of climate models.

Climate and Earth system modelling↗

DOE OSTI2021

bnl/pub-Maffettone_2020_08

The application of the XCA package as first demonstrated in aXiv:2008.00283. ABSTRACT: The discovery of new structural and functional materials is driven by phase identification, often using X-ray diffraction (XRD). Automation has accelerated the rate of XRD measurements, greatly outpacing XRD analysis techniques that remain manual, time consuming, error prone, and impossible to scale. With the advent of autonomous robotic scientists or self-driving labs, contemporary techniques prohibit the integration of XRD. Here, we describe a computer program for the autonomous characterization of XRD data, driven by artificial intelligence (AI), for the discovery of new materials. Starting from structural databases, we train an ensemble model using a physically accurate synthetic dataset, which output probabilistic classifications --- rather than absolutes --- to overcome the overconfidence in traditional neural networks. This AI agent behaves as a companion to the researcher, improving accuracy and offering unprecedented time savings, and is demonstrated on a diverse set of organic and inorganic materials challenges. This innovation is directly applicable to inverse design approaches, robotic discovery systems, and can be immediately considered for other forms of characterization such as spectroscopy and the pair distribution function.

Maffettone, PhillipM [Brookhaven National Lab. (BN↗

DOE OSTI2022

Dimensionally Reduced Model for Rapid and Accurate Prediction of Gas Saturation, Pressure, and Brine Production in a CO 2 Storage Application: Case Study Using the SACROC Field as Part of SMART Task 5

This technical report presents work conducted by the sub surface analysis team of the Strategic Systems Analysis & Engineering group at NETL for Task 5 of SMART Phase 1. This study involved the development of deep learning models for CO 2 geologic storage that are capable of accurate prediction of spatio-temporal outputs of CO 2 saturation, pressure, and brine production in three dimensional space over a storage operation's injection and post-injection timeframes. The model framework involves ensembling multi-layer encoder networks that provide dimesionality reduction of geologic inputs with fully connected long short-term memory (LSTM) neural networks that generate time-series prediction This approach offers a means to maximize training time efficiency, reduce computational memory burden, and minimize prediction turnaround.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2013

Connecting Satellite Observations with Water Cycle Variables Through Land Data Assimilation: Examples Using the NASA GEOS-5 LDAS

A land data assimilation system (LDAS) can merge satellite observations (or retrievals) of land surface hydrological conditions, including soil moisture, snow, and terrestrial water storage (TWS), into a numerical model of land surface processes. In theory, the output from such a system is superior to estimates based on the observations or the model alone, thereby enhancing our ability to understand, monitor, and predict key elements of the terrestrial water cycle. In practice, however, satellite observations do not correspond directly to the water cycle variables of interest. The present paper addresses various aspects of this seeming mismatch using examples drawn from recent research with the ensemble-based NASA GEOS-5 LDAS. These aspects include (1) the assimilation of coarse-scale observations into higher-resolution land surface models, (2) the partitioning of satellite observations (such as TWS retrievals) into their constituent water cycle components, (3) the forward modeling of microwave brightness temperatures over land for radiance-based soil moisture and snow assimilation, and (4) the selection of the most relevant types of observations for the analysis of a specific water cycle variable that is not observed (such as root zone soil moisture). The solution to these challenges involves the careful construction of an observation operator that maps from the land surface model variables of interest to the space of the assimilated observations.

Land data assimilation↗

NASA NTRS1997

Theories of Simplification and Scaling of Spatially Distributed Processes

The problem of scaling is at the heart of ecological theory, the essence of understanding and of the development of a predictive capability. The description of any system depends on the spatial, temporal, and organizational perspective chosen; hence it is essential to understand not only how patterns and dynamics vary with scale, but also how patterns at one scale are manifestations of processes operating at other scales. Evolution has shaped the characteristics of species in ways that result in scale displacement: Each species experiences the environment at its own unique set of spatial and temporal scales and interfaces the biota through unique assemblages of phenotypes. In this way, coexistence becomes possible, and biodiversity is enhanced. By averaging over space, time, and biological interactions, a genotype filters variation at fine scales and selects the arena in which it will face the vicissitudes of nature. Variation at finer scales is then noise, of minor importance to the survival and dynamics of the species, and consequently of minor importance in any attempt at description. In attempting to model ecological interactions in space, contributors throughout this book have struggled with a trade-off between simplification and "realistic" complexity and detail. Although the challenge of simplification is widely recognized in ecology, less appreciated is the intertwining of scaling questions and scaling laws with the process of simplification. In the context of this chapter simplification will in general mean the use of spatial or ensemble means and low-order moments to capture more detailed interactions by integrating over given areas. In this way, one can derive descriptions of the system at different spatial scales, which provides the essentials for the extraction of scaling laws by examination of how system properties vary with scale.

Levin, Simon A.↗

DOE OSTI2021

Learning electric vehicle driver range anxiety with an initial state of charge-oriented gradient boosting approach

This manuscript focuses on the modeling of electric vehicle (EV) driver’s range anxiety, a fear that a vehicle does not have sufficient range, or state of charge (SOC) of the battery pack, to reach its destination and would strand its occupants. Despite numerous research studies on the modeling of charging behaviors, modeling efforts to understand at what battery percentages do EV drivers charge their vehicles, and what are the associated contributing factors, are rather limited. To this end, an ensemble learning model based on gradient boosting is developed. The model sequentially fits new predictors to new residuals of the previous prediction and, then, minimizes the loss when adding the latest prediction. A total of 18 features are defined and extracted from the multisource data, which cover information on driver, vehicles, stations, traffic conditions, as well as spatial-temporal context information of the charging events. The analyzed dataset includes 4.5-year’s charging event log data from 3,096 users and 468 public charging stations in Kansas City Missouri, and the macroscopic travel demand model maintained by the metropolitan planning organization. Here, the result shows the proposed model achieved a satisfactory result with a R square value of 0.54 and root mean square error of 0.14, both better than multiple linear regression model and random forest model. To reduce range anxiety, it is suggested that the priorities of deploying new charging facilities should be given to the areas with higher daily traffic prediction, with more conservative EV users or that are further from residential areas.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS2020

Global Carbon Cycle and Climate Feedbacks in the NASA GISS ModelE2.1

We present results from the NASA GISS ModelE2.1‐G‐CC Earth System Model with coupled climate‐carbon cycle simulations that were submitted to the sixth phase of the Coupled Model Intercomparison Project (CMIP6) Coupled Climate‐Carbon Cycle MIP (C4MIP). Atmospheric CO2 concentration and carbon budgets for the land and ocean in the historical simulations were generally consistent with observations. Low simulated atmospheric CO2 concentrations during 1850‐1950 were due to excess uptake from prescribed land cover change, which erroneously replaced arid shrublands with higher biomass crops, and assumed high 2004 LAI values in vegetated lands throughout the historical simulation. At the end of the historical period, slightly higher simulated CO2 than observed resulted from the land being an insufficient net carbon sink, despite the net effect of CO2 fertilization and warming‐induced increases to leaf photosynthetic capacity. The global ocean carbon uptake agreed well with the observations with the largest discrepancies in the low latitudes. Future climate projection at 2091‐2100 agreed with CMIP5 models in the northward shift, of temperate deciduous forest climate and expansion across Eurasia along 60 °N latitude, and dramatic regional biome shifts from drying and warming in continental Europe. Carbon feedback parameters were largely similar to the CMIP5 model ensemble. For our model, the variation of land feedback parameters within the uncertainty arises from the fertilization feedback being less sensitive due to lack of increased vegetation growth, and the comparably more negative ocean carbon‐climate feedback is due to the large slowdown of the Atlantic overturning circulation.

Carbon cycle↗