Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Benchmarks and Tests of a Multidimensional Cluster Dynamics Model of Helium Implantation in Tungsten

Here, we present a hierarchical multiscale modeling study of implanted helium (He) segregation near grain boundaries (GBs) of tungsten. We extend our spatially dependent cluster dynamics model to two spatial dimensions in order to take into account the biased drift of mobile He clusters toward the GBs observed in atomic-scale simulations. We are also able to reproduce the results from large-scale molecular dynamics simulations near and away from the GBs at low fluence with the extended cluster dynamics model. We suggest and verify that the sink (surface and GB) strengths are attenuated by the increasing concentration of He clusters at high fluence. This cluster dynamics model continues to set the stage for development of fully atomistically informed, coarse-grained models for computationally efficient predictions of He retention and surface morphological evolution, advancing progress toward the goal of efficient and optimal design of plasma-facing components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Realization of a gas puff imaging system on the Wendelstein 7-X stellarator

A system for studying the spatiotemporal dynamics of fluctuations in the boundary of the W7-X plasma using the “Gas-Puff Imaging” (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices, such as W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface (LCFS) locations for different magnetic configurations in W7-X, and management of heat loads on the system’s plasma-facing components. The system features a pair of “converging–diverging” nozzles for partially collimating the gas puffed locally ≈135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (which also acts as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 × 16 pixel detector array of the fast camera. The DEGAS 2 neutral code was used to simulate the Hα (656 nm) and HeI (587 nm) line emission expected from well-characterized gas-puffs of H2 and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal-to-noise ratios (>100 at 2 Mframes/s) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the two-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge and scrape-off layer and in and around the magnetic islands outside the LCFS that make up the island divertor configuration employed on W7-X.

Instruments & Instrumentation↗

Simplified model for determining local heat flux boundary conditions for slagging wall

In this work, two models for calculating heat transfer through a cooled vertical wall covered with a running slag layer are investigated. The first one relies on a discretization of the velocity equation, and the second one relies on an analytical solution. The aim is to find a model that can be used for calculating local heat flux boundary conditions in computational fluid dynamics (CFD) analysis of such processes. Two different cases where molten deposits exist are investigated: the black liquor recovery boiler and the coal gasifier. The results show that a model relying on discretization of the velocity equation is more flexible in handling different temperature-viscosity relations. Nevertheless, a model relying on an analytical solution is the one fast enough for a potential use as a CFD submodel. Furthermore, the influence of simplifications to the heat balance in the model is investigated. It is found that simplification of the heat balance can be applied when the radiation heat flux is dominant in the balance. 9 refs., 7 figs., 10 tabs.

01 COAL, LIGNITE, AND PEAT↗

Dynamics of a fractal set of first-order magnetic phase transitions in frustrated Lu 2 CoMnO 6

The axial next-nearest-neighbor Ising model predicts a fractal (infinite) set of phases with incommensurate wave vectors that are separated by first-order phase boundaries. This complexity results from a simple frustration condition between nearest- and next-nearest-neighbor interactions along a chain of Ising spins. Using x-ray photon correlation spectroscopy (XPCS), we investigate the surprising antiferromagnetic dynamics that emerge from such a complex phase diagram over a wide range of temperatures. In this work, we present XPCS measurements of the frustrated magnetic chain compound Lu 2 CoMnO 6 and Monte Carlo simulations. Incommensurate magnetic Bragg peaks slide towards commensurate “up-up-down-down” spin order with decreasing temperature and increasing time. Both simulation and experiment support a counterintuitive “upside-down” temperature dependence of the magnetic dynamics: at higher temperatures in the region of first-order phase boundaries, slower dynamics are observed where the speckle maintains its coherence. At the lowest temperatures, where part of the sample adopts commensurate order, the dynamics speed up and result in fast decoherence.

36 MATERIALS SCIENCE↗

Computer Modeling of Transport of Oxidizing Species in Grain Boundaries during Zirconium Corrosion

Zirconium (Zr) based alloys are widely used as the cladding materials in light-water reactors. The water-side corrosion of these alloys degrades their structural integrity and poses serious safety concerns. During the Zr corrosion process, a thin Zr oxide (ZrO2) layer forms on the alloy surface and serves as a barrier layer for further corrosion. The majority of the oxide has the monoclinic phase. At the transition region between the oxide and the metal, the oxide contains a thin layer of stabilized tetragonal phase. It is found that the texture of the tetragonal layer determines the protectiveness of the oxide for corrosion. The transport of oxidizing species, such as anion defects, cation defects, and electron through the tetragonal oxide layer could be the rate limiting step of the corrosion. The defect diffusion can be affected by the growing stresses and microstructures such as grain boundaries and dislocations. In this work molecular dynamics simulations are used to investigate the anion and cation diffusion in bulk and at grain boundaries in tetragonal ZrO2. The results show that defect diffusion at grain boundaries is complex and the behavior strongly depends on the grain boundary type. For most of the grain boundaries studied the defect diffusion are much slower than in the bulk, implying that grain boundaries may not be fast defect transport paths during corrosion. The connection between the modeling results and published experimental work will also be discussed. This work is funded by the Laboratory Directed Research and Development (LDRD) program at Idaho National Laboratory.

36 MATERIALS SCIENCE↗

Validation of the RPLUS3D Code for Supersonic Inlet Applications Involving Three-Dimensional Shock Wave-Boundary Layer Interactions

A three-dimensional computational fluid dynamics code, RPLUS3D, which was developed for the reactive propulsive flows of ramjets and scramjets, was validated for glancing shock wave-boundary layer interactions. Both laminar and turbulent flows were studied. A supersonic flow over a wedge mounted on a flat plate was numerically simulated. For the laminar case, the static pressure distribution, velocity vectors, and particle traces on the flat plate were obtained. For turbulent flow, both the Baldwin-Lomax and Chien two-equation turbulent models were used. The static pressure distributions, pitot pressure, and yaw angle profiles were computed. In addition, the velocity vectors and particle traces on the flat plate were also obtained from the computed solution. Overall, the computed results for both laminar and turbulent cases compared very well with the experimentally obtained data.

Kapoor, Kamlesh↗

A vorticity-based criterion to characterise leading edge dynamic stall onset

We propose a more conservative, physically-intuitive criterion, namely, the boundary enstrophy flux ( BEF), to characterise leading-edge-type dynamic stall onset in incompressible flows. Our results are based on wall-resolved large-eddy simulations of pitching aerofoils, with fine spatial and temporal resolution around stall onset. We observe that |BEF| reaches a maximum within the stall onset regime identified. By decomposing the contribution to BEF from the flow field, we find that the dominant contribution arises from the laminar leading edge region, due to the combined effect of large clockwise vorticity and favourable pressure gradient. A relatively small contribution originates from the transitional/turbulent laminar separation bubble (LSB) region, due to LSB-induced counter-clockwise vorticity and adverse pressure gradient. This results in BEF being nearly independent of the integration length as long as the region very close to the leading edge is included. This characteristic of BEF yields a major advantage in that the effect of partial or complete inclusion of the noisy LSB region can be filtered out, without changing the BEF peak location in time significantly. Next, we analytically relate BEF to the net wall shear and show that its critical value (=max(|BEF|) ) corresponds to the instant of maximum net shear prevailing at the wall. Finally, we have also compared BEF with the leading edge suction parameter ( LESP) and find that the former reaches its maximum value between 0.3° and 0.8° of rotation earlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

VARIATIONS OF SOLAR ELECTRON AND PROTON FLUX IN MAGNETIC CLOUD BOUNDARY LAYERS AND COMPARISONS WITH THOSE ACROSS THE SHOCKS AND IN THE RECONNECTION EXHAUSTS

The magnetic cloud boundary layer (BL) is a dynamic region formed by the interaction of the magnetic cloud (MC) and the ambient solar wind. In the present study, we comparatively investigate the proton and electron mean flux variations in the BL, in the interplanetary reconnection exhaust (RE), and across the MC-driven shock by using the Wind data from 1995 to 2006. In general, the proton flux has higher increments at lower energy bands compared with the ambient solar wind. Inside the BL, the core electron flux increases quasi-isotropically and the increments decrease monotonously with energy from {approx}30% (at 18 eV) to {approx}10% (at 70 eV); the suprathermal electron flux usually increases in either parallel or antiparallel direction; the correlation coefficient of electron flux variations in parallel and antiparallel directions changes sharply from {approx}0.8 below 70 eV to {approx}0 above 70 eV. Similar results are also found for RE. However, different phenomena are found across the shock where the electron flux variations first increase and then decrease with a peak increment (>200%) near 100 eV. The correlation coefficient of electron flux variations in parallel and antiparallel directions is always around 0.8. The similar behavior of flux variations in BL and RE suggests that reconnection may commonly occur in BL. Our work also implies that the strong energy dependence and direction selectivity of electron flux variations, which were previously thought to have not enough relevance to magnetic reconnection, could be considered as an important signature of solar wind reconnection in the statistical point of view.

79 ASTRONOMY AND ASTROPHYSICS↗

Noise Considerations for Manned Reentry Vehicles

Noise measurements pertaining mainly to the static firing, launch, 0 and exit flight phases are presented for three rocket-powered vehicles 4 in the Project Mercury test program. Both internal and external data 4 from onboard recordings are presented for a range of Mach numbers and dynamic pressures and for different external vehicle shapes. The main sources of noise are noted to be the rocket engines during static firing and launch and the aerodynamic boundary layer during the high-dynamic-pressure portions of the flight. Rocket-engine noise measurements along the surface of the Mercury Big Joe vehicle were noted to correlate well with data from small models and available data for other large rockets. Measurements have indicated that the aerodynamic noise pressures increase approximately as the dynamic pressure increases and may vary according to the external shape of the vehicle, the highest noise levels being associated with conditions of flow separation. There is also a trend for the aerodynamic noise spectra to peak at higher frequencies as the flight Mach number increases.

Hilton, David A.↗

Analysis of Aircraft Clusters to Measure Sector-Independent Airspace Congestion

The Distributed Air/Ground Traffic Management (DAG-TM) concept of operations* permits appropriately equipped aircraft to conduct Free Maneuvering operations. These independent aircraft have the freedom to optimize their trajectories in real time according to user preferences; however, they also take on the responsibility to separate themselves from other aircraft while conforming to any local Traffic Flow Management (TFM) constraints imposed by the air traffic service provider (ATSP). Examples of local-TFM constraints include temporal constraints such as a required time of arrival (RTA), as well as spatial constraints such as regions of convective weather, special use airspace, and congested airspace. Under current operations, congested airspace typically refers to a sector(s) that cannot accept additional aircraft due to controller workload limitations; hence Dynamic Density (a metric that is indicative of controller workload) can be used to quantify airspace congestion. However, for Free Maneuvering operations under DAG-TM, an additional metric is needed to quantify the airspace congestion problem from the perspective of independent aircraft. Such a metric would enable the ATSP to prevent independent aircraft from entering any local areas of congestion in which the flight deck based systems and procedures may not be able to ensure separation. This new metric, called Gaggle Density, offers the ATSP a mode of control to regulate normal operations and to ensure safety and stability during rare-normal or off-normal situations (e.g., system failures). It may be difficult to certify Free Maneuvering systems for unrestricted operations, but it may be easier to certify systems and procedures for specified levels of Gaggle Density that could be monitored by the ATSP, and maintained through relatively minor flow-rate (RTA type) restrictions. Since flight deck based separation assurance is airspace independent, the challenge is to measure congestion independent of sector boundaries. Figure 1 , reproduced from Ref. 1, depicts an example traffic situation. When the situation is analyzed by sector boundaries (left side of figure), a Dynamic Density metric would identify excessive congestion in the central sector. When the same traffic situation is analyzed independent of sector boundaries (right side of figure), a Gaggle Density metric would identify congestion in two dynamically defined areas covering portions of several sectors. The first step towards measuring airspace-independent congestion is to identify aircraft clusters, i.e., groups of closely spaced aircraft. The objective of this work is to develop techniques to detect and classify clusters of aircraft.

Bilimoria, Karl D.↗

Plasma and magnetospheric research

Progress is reported in the development of programs for statistical analysis of boundary and structure type files based on surveys of Dynamics Explorere data. Programs being used for handling data on plasma boundaries in the inner magnetosphere, the structure of the plasmasphere, and the heavy ion torus may be useful for determining statistics on the warm plasma cloak and the auroral ion fountain. Data analysis and modeling; spacecraft sheath effects; and laboratory plasma flow studies are discussed.

Comfort, R. H.↗

Lower mantle heterogeneity, dynamic topography and the geoid

Density contrasts in the lower mantle, recently imaged using seismic tomography, drive convective flow which results in kilometers of dynamically maintained topography at the core-mantle boundary and at the Earth's surface. The total gravity field due to interior density contrasts and boundary topography predicts the largest wavelength components of the geoid remarkably well. Neglecting dynamic surface deformation leads to geoid anomalies of opposite sign than are observed.

Hager, B. H.↗

Lower mantle heterogeneity, dynamic topography and the geoid

Density contrasts in the lower mantle, recently imaged using seismic tomography, drive convective flow which results in kilometers of dynamically maintained topography at the core-mantle boundary and at the earth's surface. The total gravity field due to interior density constrasts and boundary topography predicts the largest wavelength components of the geoid remarkably well. Neglecting dynamic surface deformation leads to geoid anomalies of opposite sign than are observed.

Hager, B. H.↗

Measurement and memory in the periodically driven complex Ginzburg-Landau equation

In the present work we illustrate that classical but nonlinear systems may possess features reminiscent of quantum ones, such as memory, upon suitable external perturbation. As our prototypical example, we use the two-dimensional complex Ginzburg-Landau equation in its vortex glass regime. Here, we impose an external drive as a perturbation mimicking a quantum measurement protocol, with a given “measurement rate” (the rate of repetition of the drive) and “mixing rate” (characterized by the intensity of the drive). Using a variety of measures, we find that the system may or may not retain its coherence, statistically retrieving its original glass state, depending on the strength and periodicity of the perturbing field. The corresponding parametric regimes and the associated energy cascade mechanisms involving the dynamics of vortex waveforms and domain boundaries are discussed.

97 MATHEMATICS AND COMPUTING↗

A two-dimensional unsteady Euler-equation solver for flow regions with arbitrary boundaries

A new technique is described for solving supersonic fluid dynamic problems containing multiple regions of continuous flow, each bounded by a permeable or impermeable surface. Region boundaries are, in general, arbitrarily shaped and time dependent. Discretization of such a region for solution by conventional finite difference procedures is accomplished using an elliptic solver which alleviates the dependence on a particular base coordinate system. Multiple regions are coupled together through the boundary conditions. The technique has been applied to a variety of problems including the shock diffraction and pointed wedge with detached bow shock.

Hindman, R. G.↗

Increased Mach Number Capability for the NASA Glenn 10x10 Supersonic Wind Tunnel

Computational simulations and wind tunnel testing were conducted to explore the operation of the Abe Silverstein Supersonic Wind Tunnel at the NASA Glenn Research Center at test section Mach numbers above the current limit of Mach 3.5. An increased Mach number would enhance the capability for testing of supersonic and hypersonic propulsion systems. The focus of the explorations was on understanding the flow within the second throat of the tunnel, which is downstream of the test section and is where the supersonic flow decelerates to subsonic flow. Methods of computational fluid dynamics (CFD) were applied to provide details of the shock boundary layer structure and to estimate losses in total pressure. The CFD simulations indicated that the tunnel could be operated up to Mach 4.0 if the minimum width of the second throat was made smaller than that used for previous operation of the tunnel. Wind tunnel testing was able to confirm such operation of the tunnel at Mach 3.6 and 3.7 before a hydraulic failure caused a stop to the testing. CFD simulations performed after the wind tunnel testing showed good agreement with test data consisting of static pressures along the ceiling of the second throat. The CFD analyses showed increased shockwave boundary layer interactions, which was also observed as increased unsteadiness of dynamic pressures collected in the wind tunnel testing.

Wind tunnel↗