Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Novel structured Sm 0.5 Sr 0.5 CoO 3-δ cathode for intermediate and low temperature solid oxide fuel cells

The performance of solid oxide fuel cell (SOFC) can be significantly enhanced using nanostructured cathode obtained by infiltration/impregnation method. However, this method has been limited due to multi-step preparation process and instability of the obtained nanoscale catalyst under long-term operation. We report here a simple, cost-effective and reproducible approach to fabricate nanostructured Sm 0.5 Sr 0.5 CoO 3-δ (SSC) cathode with enhanced performance and stability. The SSC powders were prepared by a freeze-drying method through a combustion route using Pluronic F-127 as the template. The SSC freeze-drying powders have unique morphology and a significant phase change at 750 °C. The oxygen non-stoichiometry (δ) of the SSC powders is 0.18 at room temperature, while the δ values are 0.66, 0.75 and 0.90 at 600 °C, 700 °C and 800 °C, respectively. The novel structured SSC cathode was prepared by screen-printing and one-step sintering process using the freeze-drying SSC powders. Maximum cell power densities of 0.83 and 1.13 W cm -2 are achieved at 550 °C and 600 °C, respectively for single cells with the novel structured SSC cathode. Moreover, single cells show excellent stability at 600 °C under a current density of 600 mA cm -2 over 250 h. This work expands opportunities to exploit nanotechnology in a wide range of intermediate and low temperature energy conversion devices.

25 ENERGY STORAGE↗
DOE OSTI2022

Pre-combustion mercury removal with co-production of hydrogen via coal electrolysis

Here, pre-combustion mercury removal via coal electrolysis was performed and investigated on a bench-scale coal electrolytic cell (CEC) systemically, and factorial design was used to determine the effect of different operating conditions (coal particle size, operating temperature, operating cell voltage, and flow rate of slurry) on the percentage of mercury removal, percentage of ash removal, and dry heating value change. The results showed that the operating cell voltage, as well as the interaction between operating cell voltage and coal particle size, are significant factors in the percentage of mercury removal. There is no significant factor in the percentage of ash removal and the dry heating value change, but the coal could be purified while keeping the dry heating value almost constant after electrolysis. A co-product of hydrogen could be produced during coal electrolysis with 50% lower energy consumption compared with water electrolysis. Meanwhile, a mechanism for mercury removal in coal was proposed. The facts indicate that coal electrolysis is a promising method for pre-combustion mercury removal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Metallographic examinations and hydrogen measurements of high-burnup spent nuclear fuel cladding

In the US, commercial spent nuclear fuel (SNF) is transferred to interim dry storage casks where it will be stored for decades awaiting transport to a consolidated interim storage facility or a geologic repository. Because the fuel rod cladding is the first barrier against any radioactive material release, understanding the behavior of SNF cladding, particularly at high burnup (HBU), in dry storage conditions is crucial to safely store and transport the spent fuel. In this study, a series of metallographic examinations and cladding hydrogen measurements were conducted on HBU SNF cladding at Oak Ridge National Laboratory as a part of the High Burnup Spent Fuel Data Project, which is sponsored by the US Department of Energy (DOE) Office of Nuclear Energy (NE). Here, t o investigate the effect of simulated drying conditions on the cladding, three as-received fuel rods with different cladding materials—M5, ZIRLO, and Zircaloy-4—were heated to 400°C and then slow-cooled to room temperature. The pellet and cladding were then qualitatively and quantitatively analyzed and compared in terms of pellet crack morphology, HBU rim, waterside oxide, cladding H, and cladding hydride morphologies. This paper presents and discusses the results of these analyses in detail.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Air Classification of Forest Residue for Tissue and Ash Separation Efficiency

The goal of this Case Study was to evaluate the performance of air classification of logging residues toward meeting conversion CMAs for carbon and ash contents, as compared to the static status quo Base Case system in which the residues are first dried and then ground in a hammer mill with a 6 mm screen and fines less than 1.18 mm are removed. Also considered were moisture and ash impacts on throughput and Overall Operating Effectiveness (OOE), as well as delivered feedstock cost and minimum fuel selling price (MFSP). Laboratory data on the impacts of fan speed and moisture content on the separation efficiency of soil ash, needles and bark from white wood were received from FCIC Subtask 5.2: Preprocessing, High Temperature Conversion Preprocessing (Jordan Klinger and Tiasha Bhattacharjee, INL). Average throughput and energy consumption data were obtained from the Bioenergy Feedstock National User Facility (BFNUF) (Neal Yancey, INL) for the same air classifier. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Feedstock-Conversion Interface Consortium. Because the Base Case status quo system utilizes drying prior to grinding, we modeled the Case Study with drying prior to air classification and subsequent grinding of the separated white wood to isolate the individual quality and cost impacts of air classification relative to the Base Case system.

CMA↗
DOE OSTI2020

Testing of Crystalline Silicotitanate to Support Tank-Side Cesium Removal System Operations - 20458

The direct feed of waste from the Hanford tank farms to the Low-Activity Waste Facility at the Hanford Waste Treatment and Immobilization Plant requires an intermediate treatment step that prepares the waste for vitrification. Washington River Protection Solutions (WRPS) selected a near-tank treatment system known as the Tank-Side Cesium Removal (TSCR) system to perform the required intermediate treatment functions. The approach in the TSCR system is to filter waste supernatant with a sintered metal dead-end filter and then use a series of ion exchange columns to remove cesium; this system has several similarities to the Tank Closure Cesium Removal system that has been deployed on the Savannah River Site. The ion exchange media proposed for use is crystalline silicotitanate (CST), which is a non-elutable media with a high affinity for cesium. Because the media is non-elutable, loaded columns will be blown down with compressed air, moved into interim storage, and replaced with new columns when cesium capacity is reached. The assumed extent and rate of drying that could be achieved in the TSCR column geometry lacked confirmation by experimental data. In addition, once the columns are loaded with cesium, they generate flammable gases (primarily hydrogen) via radiolysis acting on any resident liquids, i.e., moisture, remaining in the media bed. An assessment of available information on CST concluded that gas generation data that bounds expected operational conditions were needed to support the TSCR system safety basis and planned operations. Working with WRPS, Pacific Northwest National Laboratory (PNNL) designed and conducted testing with CST media to address the need for (a) representative in-column drying data, and (b) bounding flammable gas generation data. Drying testing was performed using a full-height column with a diameter of approximately 2 inches with injected air at temperatures of 18 deg. C and 30 deg. C. Gas generation testing was conducted in an engineered bunker that allowed simultaneous irradiation of up to eight samples at a time. These two experimental approaches used at PNNL for the CST testing are summarized and the major outcomes are presented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Drop Analysis of a Department of Energy Standard Canister Containing Fort Saint Vrain SNF– 24138

DOE manages over 300 types of SNF, many of which are located at the INL site. Managing this large variety of SNF for storage, transportation, and disposal poses a challenge to DOE. The Idaho Cleanup Project and INL are collaborating on the DOE SNF Road-Ready Demonstration (“Road-Ready Demonstration”), which will develop and demonstrate the designs, technology, processes, and regulatory framework for packaging DOE-managed SNF for “road-ready dry storage.” Road-ready dry storage (RRDS) is an SNF management concept in which SNF is packaged into dry, sealed canisters that are then placed in on-site storage in anticipation of later transport and disposition. The forward-looking goal of the Road-Ready Demonstration is to establish the foundation for a large-scale RRDS program at the INL site. One critical aspect of RRDS is the ability to certify the DOE Standard Canister and its associated transportation package in accordance with 10 CFR 71 for offsite transportation. Depending on the SNF type and transportation strategy, DOE Standard Canisters may be required to maintain structural integrity under hypothetical accident scenarios (e.g., drop events). The DOE Standard Canisters have been tested and analyzed under various SNF loading configurations and accident drop events in support of the Idaho Spent Fuel Facility and other DOE programs; however, no analysis has yet been completed in support of the recently initiated Road-Ready Demonstration. This paper presents preliminary results from a finite element analysis of the Ø45.7 cm × 4.6 m (Ø18 in. × 15 ft) DOE Standard Canister under the 9 m drop at 80 degrees off-vertical drop scenario considered in previous INL tests and analyses. It considers the Fort St. Vrain spent nuclear fuel loading configuration proposed for the Road-Ready Demonstration, uses updated material properties, and applies the strain-based acceptance criteria established in ASME Boiler and Pressure Vessel Code’s Section III, Division 3 rules for storage and transportation spent nuclear fuel containments. This updated analysis is compared to previous DOE Standard Canister drop analyses. Preliminary results from the updated analysis show that certain regions of the containment exceed the allowable limits during the accidental drop event. However, these regions are limited to components performing a non-structural function. While further work on this analysis will be pursued, this analysis serves as the foundation for formal calculations used to support applicable certification efforts of the RRDS system at INL.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Developing a Novel Ultrafine Coal Dewatering Process

Dewatering fine coal is needed in many applications but has remained a great challenge. The hydrophobic-hydrophilic separation (HHS) method is a powerful technology to address this problem. However, organic solvents in solvent-coal slurries produced during HHS must be recovered for the method to be economically viable. Here, the experimental studies of recovering solvents from pentane-coal and hexane-coal slurries by combining liquid-solid filtration and in-situ vaporization and removing the solvent by a carrier gas (i.e., drying) are reported. The filtration behaviors are studied under different solid mass loading and filtration pressure. It is shown that using pressure filtration driven by 20 psig nitrogen, over 95% of solvents by mass in the slurries can be recovered, and filtration cakes can be formed in 60 s. The drying behavior was studied using nitrogen and steam at different temperatures and pressures. It is shown that residual solvents in filtration cakes can be reduced below 1400 ppm within 10 s by 15 psig steam superheated to 150 degree C, while other parameter combinations are far less effective in removing solvents. Physical processes involved in drying and the structure of solvent-laden filtration cakes are analyzed in light of these results.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Drop Analysis of a Department of Energy Standard Canister Containing Fort Saint Vrain SNF

DOE manages over 300 types of SNF, many of which are located at the INL site. Managing this large variety of SNF for storage, transportation, and disposal poses a challenge to DOE. The Idaho Cleanup Project and INL are collaborating on the DOE SNF Road-Ready Demonstration (“Road-Ready Demonstration”), which will develop and demonstrate the designs, technology, processes, and regulatory framework for packaging DOE-managed SNF for “road-ready dry storage.” Road-ready dry storage (RRDS) is an SNF management concept in which SNF is packaged into dry, sealed canisters that are then placed in on-site storage in anticipation of later transport and disposition. The forward-looking goal of the Road-Ready Demonstration is to establish the foundation for a large-scale RRDS program at the INL site. One critical aspect of RRDS is the ability to certify the DOE Standard Canister and its associated transportation package in accordance with 10 CFR 71 for offsite transportation. Depending on the SNF type and transportation strategy, DOE Standard Canisters may be required to maintain structural integrity under hypothetical accident scenarios (e.g., drop events). The DOE Standard Canisters have been tested and analyzed under various SNF loading configurations and accident drop events in support of the Idaho Spent Fuel Facility and other DOE programs; however, no analysis has yet been completed in support of the recently initiated Road-Ready Demonstration. This paper presents preliminary results from a finite element analysis of the Ø45.7 cm × 4.6 m (Ø18 in. × 15 ft) DOE Standard Canister under the 9 m drop at 80 degrees off-vertical drop scenario considered in previous INL tests and analyses. It considers the Fort St. Vrain spent nuclear fuel loading configuration proposed for the Road-Ready Demonstration, uses updated material properties, and applies the strain-based acceptance criteria established in ASME Boiler and Pressure Vessel Code’s Section III, Division 3 rules for storage and transportation spent nuclear fuel containments. This updated analysis is compared to previous DOE Standard Canister drop analyses. Preliminary results from the updated analysis show that certain regions of the containment exceed the allowable limits during the accidental drop event. However, these regions are limited to components performing a non-structural function. While further work on this analysis will be pursued, this analysis serves as the foundation for formal calculations used to support applicable certification efforts of the RRDS system at INL.

42 ENGINEERING↗
DOE OSTI2025

Impact of Storage Conditions on the Quality and Viability of Switchgrass as a Bioenergy Crop

With growing energy demands and climate concerns, advancements in bioenergy have become imperative. Biofuels promote energy independence, reduce fossil fuel reliance, and cut greenhouse gas emissions. Switchgrass (Panicum virgatumis) is an ideal bioenergy crop due to its ability to thrive on marginal lands unsuitable for food crops and its drought tolerance, rendering it a low-maintenance, high-yield option. In the bioenergy industry, energy crops are typically stored to facilitate supply chain management and ensure a continuous supply despite seasonal availability. However, the effective utilization of bioenergy crops is typically contingent upon addressing the challenges associated with biomass storage. These challenges include high moisture content that promotes biological degradation of the biomass leading to increased risk of pathogenic microbes, and chemical degradation that increases the ratio of inconvertible, inorganic materials. These issues lead to a reduction of feedstock value, diminishing the biomass-to-biofuel conversion efficacy, making switchgrass and other bioenergy crops less effective as fuel sources. This project aims to improve the storage of purpose-grown energy crops. Aerobic storage trials were conducted under varying moisture contents to stimulate real-world environmental exposure. Switchgrass samples were rewetted to 30% or 35% and stored in a bioreactor for approximately one month, or until cellular respiration ceased. Degradation indicators, such as dry matter loss, temperature changes, and cellular respiration, were measured throughout this process. Samples for compositional analysis, 16S, and ITS were taken at three different time points: before, during, and after storage, to monitor changes in biomass, microbial communities, and metabolites over time. Preliminary data indicate that dry matter loss is proportional to cellular respiration, with higher moisture content (35%) leading to higher temperatures and elevated dry matter loss. Compositional analysis and microbial community analysis are in progress. This research will provide a comprehensive understanding of storage, helping to identify stability factors in energy crops and improve best management practices for biomass producers.

09 - BIOMASS FUELS↗
DOE OSTI2025

Mobilizing mine lands for biobased decarbonization strategies

Over 163 000 ha of mine lands in Pennsylvania (PA) have the potential to produce willow as a feedstock for renewable energy generation. Each year these lands could produce between 454 000 and 907 000 dry Mg of willow, which can be a feedstock for bioenergy (i.e., biopower) with carbon capture and sequestration (BECCS) or sustainable aviation fuel (SAF) production. We used a spatially explicit model to explore cost-minimized allocation of willow biomass from abandoned mine lands (AML) to be used for BECCS or SAF production and to abate carbon dioxide. The results suggest that between 454 000 and 907 000 dry Mg of biomass can be produced on AML in PA at costs from $94 to $250 per dry Mg. This AML willow biomass could be combined with other available biomass and aggregated to ten facilities to produce 17.9 TWh of power; alternatively, it could produce 958 million liters of jet fuel, 638 million liters of renewable diesel, and 1.289 billion liters of naphtha, along with 0.735 TWh of electricity. From this analysis, in PA, under the BECCS pathway, up to 36 million Mg per year of CO2 could be abated at costs of up to $134 per Mg; under the SAF pathway, up to 17.5 million Mg per year of CO2 could be abated at costs up to $150 per Mg of CO2. The use of mine land willow as a supplemental feedstock for SAF and BECCS would need strong incentive programs if costs of production are to be comparable with production on agricultural land.

Wahlstrom, Mallory [Pennsylvania State University]↗
DOE OSTI2020

Warming of alpine tundra enhances belowground production and shifts community towards resource acquisition traits

Abstract Climate warming is expected to stimulate plant growth in high‐elevation and high‐latitude ecosystems, significantly increasing aboveground net primary production (ANPP). However, the effects of simultaneous changes in temperature, snowmelt timing, and summer water availability on total net primary production (NPP)—and elucidation of both above‐ and belowground responses—remain an important area in need of further study. In particular, measures of belowground net primary productivity (BNPP) are required to understand whether ANPP changes reflect changes in allocation or are indicative of a whole plant NPP response. Further, plant functional traits provide a key way to scale from the individual plant to the community level and provide insight into drivers of NPP responses to environmental change. We used infrared heaters to warm an alpine plant community at Niwot Ridge, Colorado, and applied supplemental water to compensate for soil water loss induced by warming. We measured ANPP, BNPP, and leaf and root functional traits across treatments after 5 yr of continuous warming. Community‐level ANPP and total NPP (ANPP + BNPP) did not respond to heating or watering, but BNPP increased in response to heating. Heating decreased community‐level leaf dry matter content and increased total root length, indicating a shift in strategy from resource conservation to acquisition in response to warming. Water use efficiency (WUE) decreased with heating, suggesting alleviation of moisture constraints that may have enabled the plant community to increase productivity. Heating may have decreased WUE by melting snow earlier and creating more days early in the growing season with adequate soil moisture, but stimulated dry mass investment in roots as soils dried down later in the growing season. Overall, this study highlights how ANPP and BNPP responses to climate change can diverge, and encourages a closer examination of belowground processes, especially in alpine systems, where the majority of NPP occurs belowground.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Cascadia Burning: The historic, but not historically unprecedented, 2020 wildfires in the Pacific Northwest, USA

Abstract Wildfires devastated communities in Oregon and Washington in September 2020, burning almost as much forest west of the Cascade Mountain crest (“the westside”) in 2 weeks (~340,000 ha) as in the previous five decades (~406,00 ha). Unlike dry forests of the interior western United States, temperate rain forests of the Pacific Northwest have experienced limited recent fire activity, and debates surrounding what drove the 2020 fires, and management strategies to adapt to similar future events, necessitate a scientific evaluation of the fires. We evaluate five questions regarding the 2020 Labor Day fires: (1) How do the 2020 fires compare with historical fires? (2) How did the roles of weather and antecedent climate differ geographically and from the recent past (1979–2019)? (3) How do fire size and severity compare to other recent fires (1985–2019), and how did forest management and prefire forest structure influence burn severity? (4) What impact will these fires have on westside landscapes? and (5) How can we adapt to similar fires in the future? Although 5 of the 2020 fires were much larger than any others in the recent past and burned ~10 times the area in high‐severity patches >10,000 ha, the 2020 fires were remarkably consistent with historical fires. Reports from the early 1900s, along with paleo‐ and dendro‐ecological records, indicate similar and potentially even larger wildfires over the past millennium, many of which shared similar seasonality (late August/early September), weather conditions, and even geographic locations. Consistent with the largest historical fires, strong east winds and anomalously dry conditions drove the rapid spread of high‐severity wildfire in 2020. We found minimal difference in burn severity among stand structural types related to previous management in the 2020 fires. Adaptation strategies for similar fires in the future could benefit by focusing on ignition prevention, fire suppression, and community preparedness, as opposed to fuel treatments that are unlikely to mitigate fire severity during extreme weather. While scientific uncertainties remain regarding the nature of infrequent, high‐severity fires in westside forests, particularly under climate change, adapting to their future occurrence will require different strategies than those in interior, dry forests.

Reilly, Matthew J.↗
DOE OSTI2022

Examining the peatland shrubification-evapotranspiration feedback following multi-decadal water table manipulation

Northern peatlands are globally important long-term sinks of carbon due to their predominantly saturated conditions. However, these ecosystems are expected to become drier with climate change, potentially leading to shrubification. As such, the response of the shrubification–evapotranspiration (ET) feedback may be of critical importance to future peatland energy, water and carbon dynamics. Here we examined the effect of multi-decadal peatland water table (WT) alteration at three adjacent sites with increasing depth to WT (WET, INTermediate, and DRY). In order to better understand the WT–shrubification–ET feedback, we measured peatland vegetation composition, microtopography and ET partitioning, where ET was measured at the ecosystem, microform, and leaf level using eddy covariance (EC), chambers and porometry, respectively. Averaged across microforms and WT treatments, there was a difference in the median measured leaf resistance (r leaf ) between plant functional types ranging from 213 s m -1 for erect dwarf shrubs, 325 s m -1 for graminoids/sedges, and 520 s m -1 for prostrate dwarf shrubs. Scaled based on LAI, the low r leaf of erect dwarf shrubs dominated hummocks, where sites with a higher proportion of hummocks had lower median canopy resistance (r v ) of 141, 133 and 130 s m -1 at the WET, INT and DRY sites respectively. Nevertheless, ET was highest at the WET site and similar between the INT and DRY sites, with greater evaporation from the moss surface at the WET site. Porometry and EC data along with a three-source model were used to independently assess the evaporative contribution from the moss surface, which ranged from 17% to 40%. For moderate and persistent changes in WT from land-use or climate change, our results suggest vegetation succession is minimal, but the microtopographic development and the concomitant differences in LAI for the various plant functional types is key to understanding changes in total ET and partitioning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Implications of Changes in Water Stress and Precipitation Extremes for Cocoa Production in Côte D'ivoire and Ghana

ABSTRACT Climate change induces high variability in drought patterns and extreme precipitation indices in rainfed cocoa farming, impacting cocoa production. This study evaluated water stress, meteorological and agricultural drought conditions, and critical extreme precipitation indices in the world's two largest cocoa‐producing nations from 1981 to 2022. The results revealed a significant reduction in total annual precipitation (PRCPTOT), in the last three decades, with the greatest decline in the 1991–2000 and 2011–2022 periods. Ghana experienced the most significant reduction up to 15% (200 mm/year) in the last decade, attributed to a substantial decrease in wet days number (RR1) up to 25 days per year, a reduction in maximum consecutive wet days (CWD) up to 6 days per year, and an increase in maximum consecutive dry days (CDD) up to 15 days per year. Moreover, there was a notable decline in the Simple Daily Intensity Index (SDII), with reductions of up to 4 mm/day in certain areas, contributing to increased drought frequency, severity, and duration. In the most recent decade (2011–2022), particularly during the extremely dry years of 2013 and 2015, cocoa‐growing regions in Ghana (GHA) and eastern Côte d'Ivoire (CIV) experienced prolonged agricultural drought expressed by soil moisture deficit, typically extending from May to September. Additionally, large portions of central and eastern Ghana, as well as northeastern Côte d'Ivoire experienced sustained water stress, with over three consecutive months of total monthly precipitation falling below 100 mm, negatively impacting cocoa productivity. The decrease in the yield in the range of 2.5% to 37% was noted in the dry years and the following years, varying according to the country depending on the severity of the drought. Sensitivity analysis highlights cocoa yield's responsiveness to drought and water stress, particularly in specific years when water stress occurred, such as 1984,1985, 1989, 1995, 1999, 2000, and 2008. Considering the observed trends in precipitation patterns and their impact on cocoa production, it is crucial to acknowledge the inherent uncertainty of future precipitation patterns due to climate change. To address this challenge effectively, our study underscores the importance of identifying and closely monitoring regions currently facing water stress, as determined by precipitation and drought indicators. Over the analysed period (1981–2022), we have noted shifts in the distribution of water‐stressed areas, highlighting the dynamic nature of this issue. Consequently, we advocate for a targeted approach to implement cocoa supplementary irrigation in consistently water‐stressed regions.

Obahoundje, Salomon [International Water Managemen↗
DOE OSTI2024

Labile assembly of a tardigrade protein induces biostasis

Abstract Tardigrades are microscopic animals that survive desiccation by inducing biostasis. To survive drying tardigrades rely on intrinsically disordered CAHS proteins, which also function to prevent perturbations induced by drying in vitro and in heterologous systems. CAHS proteins have been shown to form gels both in vitro and in vivo, which has been speculated to be linked to their protective capacity. However, the sequence features and mechanisms underlying gel formation and the necessity of gelation for protection have not been demonstrated. Here we report a mechanism of fibrillization and gelation for CAHS D similar to that of intermediate filament assembly. We show that in vitro, gelation restricts molecular motion, immobilizing and protecting labile material from the harmful effects of drying. In vivo, we observe that CAHS D forms fibrillar networks during osmotic stress. Fibrillar networking of CAHS D improves survival of osmotically shocked cells. We observe two emergent properties associated with fibrillization; (i) prevention of cell volume change and (ii) reduction of metabolic activity during osmotic shock. We find that there is no significant correlation between maintenance of cell volume and survival, while there is a significant correlation between reduced metabolism and survival. Importantly, CAHS D's fibrillar network formation is reversible and metabolic rates return to control levels after CAHS fibers are resolved. This work provides insights into how tardigrades induce reversible biostasis through the self‐assembly of labile CAHS gels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Understanding the diversity of the West African monsoon system change projected by CORDEX-CORE regional climate models

Understanding real uncertainties in projections is needed to support actions of decision and policy makers. In this study, two state-of-the-art regional climate models with ~ 25 km horizontal resolution forced with three different global climate models are employed to investigate the response of the West African Monsoon (WAM) system under the low (RCP2.6) and high (RCP8.5) emission scenarios. We make a step towards assessing the plausibility of rainfall change (ΔPr) patterns based on the models’ ability to realistically represent the WAM system under the historical period, and by analyzing changes in mechanisms associated with ΔPr patterns. Under global warming, experiments exhibit diverse ΔPr patterns underpinned by different combinations of mechanisms operating simultaneously. A dipole-like surface pressure change between the Sahara Desert and the Guinea Coast appears to be a differentiating factor between experiments featuring homogeneous or increased rainfall over all or a part of the Sahel from those simulating heterogeneous or reduced rainfall over the same domain. This dipole acts by modulating the amount and the extent of deepening of the monsoon flux inland, and hence the latitudinal positioning of the monsoon convective system. This process contributes to moistening the whole or central and eastern Sahel in some experiments while drying the Guinea Coast. The West African Westerly Jet (WAWJ) is responsible for strengthening and moistening the western Sahel under RCP2.6. However, the WAMJ becomes much stronger under RCP8.5 and may have contributed to the drying of the western Sahel by shifting moisture eastwards in addition to the mid-tropospheric moisture divergence through enhanced African Easterly Jet. Furthermore, for experiments expecting wetting (drying) of the Sahel, the strengthening (weakening) of the tropical easterly jet may have contributed to the projected intensification (reduction) of WAM rainfall by favoring uplift (downlift) above 600 hPa. It also emerges that the ΔPr patterns from REMO2015 experiments are likely more plausible than those from RegCM4-v7. The impacts of strong warming on the regional hydrological cycle are further investigated and we found that changes gradually intensify with the level of radiative forcing, highlighting the importance of mitigating warming as recommended by the Paris agreement.

CORDEX-CORE↗
DOE OSTI2026

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $\$3.2$ per tonne of coal and $\$186$ billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$\$4.4$ per tonne of ash and $\$1.2$ billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

01 COAL, LIGNITE, AND PEAT↗