Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drag”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

On the theory of compliant wall drag reduction in turbulent boundary layers

A theoretical model has been developed which can explain how the motion of a compliant wall reduces turbulent skin friction drag. Available experimental evidence at low speeds has been used to infer that a compliant surface selectively removes energy from the upper frequency range of the energy containing eddies and through resulting surface motions can produce locally negative Reynolds stresses at the wall. The theory establishes a preliminary amplitude and frequency criterion as the basis for designing effective drag reducing compliant surfaces.

Ash, R. L.↗

Use of a pitot-static probe for determining wing section drag in flight at Mach numbers from 0.5 to approximately 1.0

The use of a pitot-static probe to determine wing section drag at speeds from Mach 0.5 to approximately 1.0 was evaluated in flight. The probe unit is described and operational problems are discussed. Typical wake profiles and wing section drag coefficients are presented. The data indicate that the pitot-static probe gave reliable results up to speeds of approximately 1.0.

Montoya, L. C.↗

Bonded composite to metal scarf joint performance in an aircraft landing gear drag strut

The structural performance of a boron-epoxy reinforced titanium drag strut, which contains a bonded scarf joint and was designed to the criteria of the Boeing 747 transport, was evaluated. An experimental and analytical investigation was conducted. The strut was exposed to two lifetimes of spectrum loading and was statically loaded to the tensile and compressive design ultimate loads. Throughout the test program no evidence of any damage in the drag strut was detected by strain gage measurements, ultrasonic inspection, or visual observation. An analytical study of the bonded joint was made using the NASA structural analysis computer program NASTRAN. A comparison of the strains predicted by the NASTRAN computer program with the experimentally determined values shows excellent agreement. The NASTRAN computer program is a viable tool for studying, in detail, the stresses and strains induced in a bonded joint.

Howell, W. E.↗

Boundary-layer transition and displacement thickness effects on zero-lift drag of a series of power-law bodies at Mach 6

Wave and skin-friction drag have been numerically calculated for a series of power-law bodies at a Mach number of 6 and Reynolds numbers, based on body length, from 1.5 million to 9.5 million. Pressure distributions were computed on the nose by the inverse method and on the body by the method of characteristics. These pressure distributions and the measured locations of boundary-layer transition were used in a nonsimilar-boundary-layer program to determine viscous effects. A coupled iterative approach between the boundary-layer and pressure-distribution programs was used to account for boundary-layer displacement-thickness effects. The calculated-drag coefficients compared well with previously obtained experimental data.

Ashby, G. C., Jr.↗

A study of the diurnal variation in the thermosphere as derived by satellite drag

An analysis was performed on 29,574 densities derived from the drag of 10 satellites to determine simultaneously the parameters of the solar-activity effect in the thermosphere on the one hand, and the amplitude and shape of the diurnal-variation curve on the other. This paper reports on the study of the diurnal variation only. Although a considerable amount of smoothing is inherent in the drag method, it seemed useful to see whether any change could be detected in the shape of the diurnal-variation curve with height, latitude and solar activity. None was detected; the curve remains remarkably stable, symmetric, with a maximum at 14 hr 20 min L.S.T. and a minimum at 2 hr 20 min L.S.T. A systematic variation of the temperature range with height is observed when static models are used to derive it.

Jacchia, L. G.↗

Inviscid drag at transonic speeds

A systematic asymptotic expansion procedure is introduced into the Euler equations to obtain the transonic, small-disturbance potential equation and corresponding relation for the drag. The relation consists of an integral around any contour enclosing the body and an integral along all shocks contained within the contour. Interpretations are given for the origin of the pressure drag due to shock waves, lift, and wind-tunnel boundaries. Numerical procedures are discussed for evaluating these quantities from finite-difference relaxation calculations. Computed results are included for various contours, and results are compared with some experimental data.

Murman, E. M.↗

Sweep effect on the drag of rows of perpendicular circular cylinders in a laminar boundary layer at supersonic free-stream velocities

Drag measurements were obtained for circular cylinders attached perpendicularly to a flat-plate surface. Measurements were obtained for a single cylinder and for rows of cylinders. The cylinders were alined at various sweep angles relative to the free-stream velocity vector and at spacings appropriate for roughness elements used as boundary layer trips. The drag measurements were obtained for Mach numbers of 3.95 and 4.60, ratios of cylinder height to an undisturbed laminar boundary layer displacement thickness of approximately 1.0 to 3.0, a cylinder height-to-diameter ratio of approximately 2, and sweep angles up to 60. A complete presentation of the experimental results is given. A discussion of the more significant findings, including the most appropriate parameters for correlating the experimental results, is presented.

Lamb, M.↗

Aerodynamic drag reduction tests on a full-scale tractor-trailer combination with several add-on devices

Aerodynamic drag tests were performed on a conventional cab-over-engine tractor with a 45-foot trailer and five commercially available or potentially available add-on devices using the coast-down method. The tests ranged in velocity from approximately 30 miles per hour to 65 miles per hour and included some flow visualization. A smooth, level runway at Edwards Air Force Base was used for the tests, and deceleration measurements were taken with both accelerometers and stopwatches. An evaluation of the drag reduction results obtained with each of the five add-on devices is presented.

Montoya, L. C.↗

Drag and stability characteristics of a variety of reefed and unreefed parachute configurations at Mach 1.80 with an empirical correlation for supersonic Mach numbers

An investigation was conducted at Mach 1.80 in the Langley 4-foot supersonic pressure tunnel to determine the effects of variation in reefing ratio and geometric porosity on the drag and stability characteristics of four basic canopy types deployed in the wake of a cone-cylinder forebody. The basic designs included cross, hemisflo, disk-gap-band, and extended-skirt canopies; however, modular cross and standard flat canopies and a ballute were also investigated. An empirical correlation was determined which provides a fair estimation of the drag coefficients in transonic and supersonic flow for parachutes of specified geometric porosity and reefing ratio.

Couch, L. M.↗

The effect of Reynolds number on boattail drag

An investigation has been conducted in the Langley pilot transonic cryogenic tunnel to determine the effects of varying Reynolds number on boattail drag at subsonic speeds. Six boattailed cone-cylinder nacelle models were tested with the jet exhaust simulated by a cylindrical sting. Reynolds number was varied from about 2.6 million to 132 million by changing model length and unit Reynolds number. Boattail pressure coefficient distributions show that increasing Reynolds number tends to make the pressure coefficients in the expansion region more negative and the pressure coefficients in the recompression region more positive. These two effects were compensating and as a result there was little or no effect of Reynolds number on the pressure drag of the isolated boattails.

Reubush, D. E.↗

An analytic method to account for drag in the Vinti satellite theory

A quadrature algorithm is presented which employs analytical expressions for the variations of satellite orbital elements caused by air drag. The Hamiltonian is formally preserved and the Jacobi constants of the motion are advanced with time through the variational equations. The atmospheric density profile is written as a fitted exponential function of the eccentric anomaly, which adheres to tabulated data at all altitudes and simultaneously reduces the variational equations to definite integrals with closed form evaluations, whose limits are in terms of the eccentric anomaly. Results are given for two intense air drag satellites and indicate that the satellite ephemerides produced by this method in conjunction with the Vinti program are of very high accuracy.

Watson, J. S.↗

Rotorcraft low-speed download drag definition and its reduction

Download drag for rotorcraft in hover and low-speed flight is a burden which significantly affects useful load, fuel, and payload. Reduction of the burden will enhance these aspects of rotorcraft and complement the forthcoming improvements in isolated rotor performance. Analyses and experimental data are available, though fragmentary, regarding gross drag, thrust recovery, and other characteristics which can be utilized to define interim rotorcraft design changes to reduce the burden. Eventually the experimental data and a comprehensive combination of rotor, rotor-wake, and potential-flow analyses can evolve to reduce the burden to an absolute minimum.

Wilson, J. C.↗

The effect of Reynolds number on the boattail drag of two wing-body configurations

An investigation has been conducted in the Langley 1/3-meter transonic cryogenic tunnel to determine the effects of varying Reynolds number on the boattail drag of wing-body configurations at subsonic speeds. Two boattailed cone-cylinder nacelle models were tested with a 60 deg delta wing at an angle of attack of 0 deg. Reynolds number, based on model length, was varied from about 2.5 million to 67 million. Even though the presence of the wing had large effects on the boattail pressure coefficients, the results of this investigation were similar to those previously found for a series of isolated boattails. Boattail pressure coefficients in the expansion region became more negative with increasing Reynolds number, while those in the recompression region became more positive. These two effects were compensating, and as a result, there was virtually no effect of Reynolds number on boattail pressure drag.

Reubush, D. E.↗

Trimmed noncoplanar planforms with minimum vortex drag

Vortex-lattice subsonic method determines mean camber surface for trimmed noncoplanar planforms with minimum vortex drag. Multiple surfaces can be designed together to yield trimmed configuration with minimum induced drag at some specified lift coefficient. Program is applicable to isolated wings, wing-canard configuration, tandem wing, and wing-winglet configuration.

Lamar, J. E.↗

Effects of jet exhaust gas properties on exhaust simulation and afterbody drag

The effect of varying the jet exhaust's ratio of specific heats, gas constant, and temperature on airplane afterbody drag was investigated. Jet exhaust simulation parameters were evaluated also. Subsonic and transonic tests were made using a single nacelle model with afterbodies having boattail angles of 10 deg and 20 deg. Besides air, three other jet exhaust gases were investigated. The ratios of specific heats, gas constants, and total temperatures of the four exhaust gases ranged from 1.40 to 1.26, 287 to 376 J/kg-K, and 300 to 1013 K, respectively. For steep boattail angles, and transonic speeds and typical turbojet pressure ratios, the current data indicate that the use of air to simulate a dry turbojet exhaust can result in an overprediction of afterbody drag as high as 17 percent of the dry turbojet value.

Compton, W. B., III↗

Drag Reduction: Back to Basics

Aeronautical design engineering for general aviation aircraft considers the iteration of wind tunnel test data are lift, weight, drag, and thrust as the basic balancing factor in drag reduction efforts.

Nicks, O. W.↗

The economic impact of drag in general aviation

General aviation aircraft fuel consumption and operating costs are closely linked to drag reduction methods. Improvements in airplane drag are envisioned for new models; their effects will be in the 5 to 10% range. Major improvements in fuel consumption over existing turbofan airplanes will be the combined results of improved aerodynamics plus additional effects from advanced turbofan engine designs.

Neal, R. D.↗