SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Caloric and exercise requirements of space flight - Biostereometric results from Skylab

The biostereometric study of the Skylab astronauts used stereophotogrammetry to make accurate three-dimensional measurements of body form, from which regional and total body volumes were derived. Volume changes in the thighs and calves, over the course of the flight, showed a high correlation with inflight exercise on the bicycle ergometer, and suggested that an exercise level of 80-100 W-min/d/kg lean body mass would be necessary to prevent inflight muscle atrophy. The bicycle ergometer is thus a relatively inefficient means of preventing leg muscle atrophy. Inflight caloric intake showed a high correlation with the change in volume of the buttocks, the abdomen, and the body as a whole, and suggested that a caloric intake of 47-51 kcal/d/kg lean body mass would be necessary to prevent a change in body fat. Only one of the astronauts exceeded this range and gained body fat; the group as a whole showed a mean fat loss of 1.2 kg.

Whittle, M. W.↗

NASA NTRS1982

Computer program for calculating full potential transonic, quasi-three-dimensional flow through a rotating turbomachinery blade row

A fast, reliable computer code is described for calculating the flow field about a cascade of arbitrary two dimensional airfoils. The method approximates the three dimensional flow in a turbomachinery blade row by correcting for stream tube convergence and radius change in the throughflow direction. A fully conservative solution of the full potential equation is combined with the finite volume technique on a body-fitted periodic mesh, with an artificial density imposed in the transonic region to insure stability and the capture of shock waves. The instructions required to set up and use the code are included. The name of the code is QSONIC. A numerical example is also given to illustrate the output of the program.

Farrell, C. A.↗

NASA NTRS1984

The effect of realistic conductivities on the high-latitude neutral thermospheric circulation

The dynamics of the high latitude thermosphere are dominated by the ion circulation pattern driven by magnetospheric convection. The reaction of the neutral thermosphere is influenced by both the magnitude of the ion convection velocity and by the conductivity of the thermosphere. Using a three-dimensional, time-dependent, thermospheric, neutral model together with different ionospheric models, the effect of changes in conductivity can be assessed. The ion density is described by two models: the first is the empirical model of Chiu (1975) appropriate for very quiet geomagnetic conditions, and the second is a modified version of the theoretical model of Quegan et al. (1982). The differences in the neutral circulation resulting from the use of these two ionospheric models emphasizes the need for realistic high latitude conductivities when attempting to model average or disturbed geomagnetic conditions, and a requirement that models should couple realistically the ionosphere and the neutral thermosphere. An attempt is made to qualitatively interpret some of the features of the neutral circulation produced at high latitudes by magnetospheric processes.

Fuller-Rowell, T. J.↗

NASA NTRS1985

Waveform synthesis of surface waves in a laterally heterogeneous earth by the Gaussian beam method

The present investigation is concerned with an application of the Gaussian beam method to surface waves in the laterally heterogeneous earth. The employed method has been developed for ray tracing and synthesizing seismograms of surface waves in cases involving the laterally heterogeneous earth. The procedure is based on formulations derived by Yomogida (1985). Vertical structure of the wave field is represented by the eigenfunctions of normal mode theory, while lateral variation is expressed by the parabolic equation as in two-dimensional acoustic waves or elastic body waves. It is demonstrated that a large-amplitude change can result from a slight perturbation in the phase velocity model.

Yomogida, K.↗

NASA NTRS1987

A fixed grid numerical methodology for phase change problems involving a moving heat source

A numerical method for solving phase change problems involving a moving heat source is presented and illustrated by a two-dimensional example. The method uses a fixed grid and does not require the implementation of the Stefan condition at the solid-liquid interface; the procedure can thus be easily implemented using existing fixed grid codes. The problem considered as an example involves natural convection flow in the molten metal during tungsten inert gas welding.

Prakash, C.↗

NASA NTRS1989

Global environmental effects of impact-generated aerosols: Results from a general circulation model, revision 1

Interception of sunlight by the high altitude worldwide dust cloud generated by impact of a large asteroid or comet would lead to substantial land surface cooling, according to our three-dimensional atmospheric general circulation model (GCM). This result is qualitatively similar to conclusions drawn from an earlier study that employed a one-dimensional atmospheric model, but in the GCM simulation the heat capacity of the oceans substantially mitigates land surface cooling, an effect that one-dimensional models cannot quantify. On the other hand, the low heat capacity of the GCM's land surface allows temperatures to drop more rapidly in the initial stage of cooling than in the one-dimensional model study. These two differences between three-dimensional and one-dimensional model simulations were noted previously in studies of nuclear winter; GCM-simulated climatic changes in the Alvarez-inspired scenario of asteroid/comet winter, however, are more severe than in nuclear winter because the assumed aerosol amount is large enough to intercept all sunlight falling on earth. Impacts of smaller objects could also lead to dramatic, though less severe, climatic changes, according to our GCM. Our conclusion is that it is difficult to imagine an asteroid or comet impact leading to anything approaching complete global freezing, but quite reasonable to assume that impacts at the Alvarez level, or even smaller, dramatically alter the climate in at least a patchy sense.

Covey, Curt↗

NASA NTRS1989

The transient behavior of weldpools with a deformed free surface

Transient heat transfer, fluid flow and phase change in a weldpool with a deformed free surface are modeled using a two-dimensional coordinate transfornmation. The theoretical approach makes it possible to accurately model high Marangoni number flows even when the free surface is not horizontal. The method is used to examine the role of surface deformation and surface tension forces in controlling weld penetration during cathode spot welding of steel and aluminum. The calculated flow fields, temperature distributions and weldpool shapes are consistent with experimental findings, and are in reasonable agreement with previously published modeling efforts.

Thompson, M. E.↗

NASA NTRS1989

Remote sensing of the earth's atmosphere by infrared absorption spectroscopy - An update of the ATMOS program

The NASA's Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment was designed to address the requirements of the remote sensing of atmospheric composition on a four-dimensional basis (latitude, longitude, altitude, and time), necessary for understanding and predicting the effect of changes on the chemical balance of the atmosphere. This paper describes the ATMOS program, overviews the ATMOS instrument and its performance, and presents the results obtained during its first flight as part of the Spacelab 3 Space Shuttle mission (April 29 through May 6, 1985). Also discussed are prospects for further missions.

Zander, R.↗

NASA NTRS1990

Perturbations to tropospheric oxidants, 1985-2035. I - Calculations of ozone and OH in chemically coherent regions

A one-dimensional model based on the sensitivity coefficients of Thompson (1990) is used to calculate regional changes in tropospheric O3 and OH due to specified global or regional changes in CH4 and CO emissions over the period 1985-2035. The methods applied are explained, and the results are presented in extensive tables and graphs and characterized in detail. A 10-15-percent increase in global tropospheric O3 and a 10-15-percent decrease in OH are predicted for both (1) global scenarios with continuing increases in CH4 and CO and (2) regional scenarios where emissions are limited in some regions but not in others; significant regional variation in O3 is predicted for (2). If depletion of O3 in the stratosphere and global warming are introduced into (1) or (2), however, they nearly cancel out the tropospheric O3 increases and OH decreases.

Thompson, Anne M.↗

NASA NTRS1991

Computer-Aided Design Of Sheet-Material Parts

Computer-aided-design system partly automates tedious process of designing and guiding assembly of small pieces of flat sheet material into large surfaces that approximate smoothly curved surfaces having complicated three-dimensional shapes. Capability provides for flexibility enabling designer to assess quickly and easily effects of changes in design in making engineering compromises among various sizes and shapes. Saves time and money in both design and fabrication. Used in rocket-engine application and other applications requiring design of sheet-material parts.

Gilbert, Jeffrey L.↗

NASA NTRS1993

The middeck 0-gravity dynamics experiment

The Middeck 0-Gravity Dynamics Experiment (MODE), flown onboard the Shuttle STS-48 Mission, consists of three major elements: the Experiment Support Module, a dynamics test bed providing computer experiment control, analog signal conditioning, power conditioning, an operator interface consisting of a keypad and display, experiment electrical and thermal control, and archival data storage: the Fluid Test Article assembly, used to investigate the dynamics of fluid-structure interaction in 0-gravity; and the Structural Test Article for investigating the open-loop dynamics of structures in 0-gravity. Deployable, erectable, and rotary modules were assembled to form three one- and two-dimensional structures, in which variations in bracing wire and rotary joint preload could be introduced. Change in linear modal parameters as well as the change in nonlinear nature of the response is examined. Trends in modal parameters are presented as a function of force amplitude, joint preload, and ambient gravity. An experimental study of the lateral slosh behavior of contained fluids is also presented. A comparison of the measured earth and space results identifies and highlights the effects of gravity on the linear and nonlinear slosh behavior of these fluids.

Crawley, Edward F.↗

NASA NTRS1993

Linear stability of the confined compressible reacting mixing layer

This paper investigates the linear stability of confined mixing layers with special emphasis on the effects of heat release and compressibility. The results show that reflection of supersonic disturbances by the walls makes the confined supersonic mixing layer more unstable than the unconfined free shear layer. Decreasing the distance between the walls makes the flow more unstable. However, subsonic disturbances are relatively unaffected by the walls. Heat release and Mach number hardly change the growth rates of supersonic disturbances. The most unstable supersonic disturbances are two-dimensional in rectangular channel flows, but three-dimensional in partially confined flows. Finally, the reactants are not strongly mixed by supersonic instabilities, which mainly disturb one side of the layer.

Shin, D. S.↗

NASA NTRS1949

Characteristics of Low-Aspect-Ratio Wings at Supercritical Mach Numbers

The separation of the flow over wings precipitated by the compression shock that forms as speeds are increased into the supercritical Mach number range has imposed serious difficulties in the improvement of aircraft performance. Three difficulties rise principally as a consequence of the rapid drag rise and the loss of lift that causes serious stability changes when the wing shock-stalls. Favorable relieving effects due to the three-dimensional flow around the tips were obtained and these effects were of such magnitude that it is indicated that low-aspect-ratio wings offer a possible solution of the problems encountered.

Stack, John↗

NASA NTRS2007

On the Origin of Near-Radial Magnetic Fields in the Heliosphere: Numerical Simulations

Deviations from the direction of the "Parker spiral" can be found in in situ measurements of the interplanetary magnetic field on essentially all scales. One intriguing subset is the intervals of near-radial magnetic field, lasting for many hours. Some such intervals are obviously associated with coronal mass ejections, while others appear to be embedded within the ambient solar wind. Most occur on declining speed profiles, such that, when mapped back to the Sun, an entire radial field interval appears to have been launched at approximately the same time. It has been proposed that these events are the result of abrupt, semipermanent speed decreases on these field lines close to the Sun, and that such speed changes might be due to interchange reconnection. In this study, we use a three-dimensional, time-dependent magnetohydrodynamic model to assess to what extent this can account for near-radial magnetic fields observed relatively far out in the heliosphere. We find that sudden speed drops on the trailing portions of high-speed flows can produce strongly underwound (that is near radial) field lines in the heliosphere, although significantly larger speed gradients are required than are typically observed. Moreover, the simulations also reproduce the decreases in density, temperature, and magnetic field strength that are also commonly observed within these events. The question of what produces the abrupt speed drops remains to be answered.

Mikic, Zoran↗

NASA NTRS2007

Global Observations - The Key to Model Development and Improved Assessments

One application of global models is to predict the response of stratospheric ozone to changes in composition and climate. The recent international ozone assessment included results from three-dimensional models with interactions among the dynamical, photochemical and radiative processes that all influence ozone behavior. The physical basis of such models is far more realistic than that of either the one-dimensional (single profile) models of the 1970's and early 1980's or the two-dimensional (latitude height) models of the late 1980's and 1990's. Observations have played a key role in the model development at all stages. This talk will highlight the role of observations in inspiring broad model improvements that have grown from the effort to reproduce observed relationships or processes, for example the correlations between long-lived constituents seen in aircraft data and the deep unmixed descent of mesospheric air into the winter polar vortices seen from satellite. The talk will also trace the evolution of model evaluation from contour plots showing 'good agreement' to the more rigorous process-oriented evaluation of three-dimensional models that is becoming the norm using the wealth of space-based observations obtained from the late 1970's until present.

Douglass, Anne R.↗

NASA NTRS2011

Flow Simulation of Supersonic Inlet with Bypass Annular Duct

A relaxed isentropic compression supersonic inlet is a new concept that produces smaller cowl drag than a conventional inlet, but incurs lower total pressure recovery and increased flow distortion in the (radially) outer flowpath. A supersonic inlet comprising a bypass annulus to the relaxed isentropic compression inlet dumps out airflow of low quality through the bypass duct. A reliable computational fluid dynamics solution can provide considerable useful information to ascertain quantitatively relative merits of the concept, and further provide a basis for optimizing the design. For a fast and reliable performance evaluation of the inlet performance, an equivalent axisymmetric model whose area changes accounts for geometric and physical (blockage) effects resulting from the original complex three-dimensional configuration is proposed. In addition, full three-dimensional calculations are conducted for studying flow phenomena and verifying the validity of the equivalent model. The inlet-engine coupling is carried out by embedding numerical propulsion system simulation engine data into the flow solver for interactive boundary conditions at the engine fan face and exhaust plane. It was found that the blockage resulting from complex three-dimensional geometries in the bypass duct causes significant degradation of inlet performance by pushing the terminal normal shock upstream.

Kim, HyoungJin↗

NASA NTRSDate not supplied

Ice Growth Model and Lunar Tanker for Polar Water Extraction

In-Situ Resource Utilization (ISRU) is a major component of sustainable and cost-effective missions to the Moon and beyond. Ever since it has been identified in the Permanently Shadowed Regions (PSRs) of the Moon, water has become a resource of interest for it’s wide range of uses such as life support and hydrogen and oxygen rocket propellant. It is ice-bound in the regolith, so separation typically involves heating to sublimation temperatures and capturing at very low pressure. One option is to then store it in ice form and transport it out of the PSR and into a sunlit ridge. From here, processes such as electrolysis can be performed. An understanding of frost growth dynamics under rarefied conditions is necessary for successful water production, though. An analytical model was developed using a Diffusion-Limited Aggregation (DLA) approach to evaluate bulk thermal conductivity changes of frost under varying conditions. This model will be evaluated using a one-dimensional frost growth experiment on a horizontal, flat plate under vacuum and cryogenic conditions. The tests will measure frost growth rate and bulk density, and the thermal conductivity of the ice layer as a function of thickness for different plate temperatures. The test data will then be used to validate and improve the analytical model.

Lunar water↗

NASA NTRS1990

Cirrus cloud model parameterizations: Incorporating realistic ice particle generation

Recent cirrus cloud modeling studies have involved the application of a time-dependent, two dimensional Eulerian model, with generalized cloud microphysical parameterizations drawn from experimental findings. For computing the ice versus vapor phase changes, the ice mass content is linked to the maintenance of a relative humidity with respect to ice (RHI) of 105 percent; ice growth occurs both with regard to the introduction of new particles and the growth of existing particles. In a simplified cloud model designed to investigate the basic role of various physical processes in the growth and maintenance of cirrus clouds, these parametric relations are justifiable. In comparison, the one dimensional cloud microphysical model recently applied to evaluating the nucleation and growth of ice crystals in cirrus clouds explicitly treated populations of haze and cloud droplets, and ice crystals. Although these two modeling approaches are clearly incompatible, the goal of the present numerical study is to develop a parametric treatment of new ice particle generation, on the basis of detailed microphysical model findings, for incorporation into improved cirrus growth models. For example, the relation between temperature and the relative humidity required to generate ice crystals from ammonium sulfate haze droplets, whose probability of freezing through the homogeneous nucleation mode are a combined function of time and droplet molality, volume, and temperature. As an example of this approach, the results of cloud microphysical simulations are presented showing the rather narrow domain in the temperature/humidity field where new ice crystals can be generated. The microphysical simulations point out the need for detailed CCN studies at cirrus altitudes and haze droplet measurements within cirrus clouds, but also suggest that a relatively simple treatment of ice particle generation, which includes cloud chemistry, can be incorporated into cirrus cloud growth.

Sassen, Kenneth↗