Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “differential equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

The Effect of Nonlinear Critical Layers on Boundary Layer Transition

Asymptotic methods are used to describe the nonlinear self-interaction between pairs of oblique instability modes that eventually develops when initially linear and spatially growing instability waves evolve downstream in nominally two-dimensional and spanwise periodic laminar boundary layers. The first nonlinear reaction takes place locally within a so-called 'critical layer' with the flow outside this layer consisting of a locally parallel mean flow plus an appropriate superposition of linear instability waves. The amplitudes of these waves are determined by either a single integro-differential equation or by a pair of integro-differential equations with quadratic to quartic-type nonlinearities.

Goldstein, Marvin E.↗

Nonlinear filtering for spacecraft attitude estimation

Nonlinear filtering techniques are applied to spacecraft attitude estimation using quaternion parameterization for the attitude kinematics. By replacing the angular velocity vector by the gyro output vector, a state dependent noise vector is introduced in the seven-dimensional system equations. The resulting conditional probability density function from the Ito differential rule is governed by the Fokker Planck partial differential equation which is approximated by the second order mean and covariance differential equations. In order to minimize computer loading, the covariance propagation is carried out in six-dimensional state space using a matrix transformation. The star tracker data is used to update the covariance matrix in the seven-dimensional space. The algorithm is simulated for an earth pointing spacecraft mission, using Monte Carlo samples of gyro and star measurements. The performance of the second order filter is compared with the extended Kalman Filter through several simulation runs and drift rates have been identified.

Vathsal, S.↗

Simulation of Stochastic Processes by Coupled ODE-PDE

A document discusses the emergence of randomness in solutions of coupled, fully deterministic ODE-PDE (ordinary differential equations-partial differential equations) due to failure of the Lipschitz condition as a new phenomenon. It is possible to exploit the special properties of ordinary differential equations (represented by an arbitrarily chosen, dynamical system) coupled with the corresponding Liouville equations (used to describe the evolution of initial uncertainties in terms of joint probability distribution) in order to simulate stochastic processes with the proscribed probability distributions. The important advantage of the proposed approach is that the simulation does not require a random-number generator.

Zak, Michail↗

Symmetry Determining Equations of the Euler Equations

This purpose of this document is to provide a clear derivation of the symmetry determining equations (SDEs) of the Euler equations to supplement the lecture document. The Euler equations are a coupled system of three first-order quasilinear hyperbolic partial differential equations (PDEs). The Euler equations are a system of partial differential equations (PDEs) for fluid velocity v(t, r), fluid density ρ(t, r), and fluid pressure P(t, r), where t is time and r is the spatial coordinate.

97 MATHEMATICS AND COMPUTING↗

Coincidence degree and periodic solutions of neutral equations

The problem of existence of periodic solutions for some nonautonomous neutral functional differential equations is examined. It is an application of a basic theorem on the Fredholm alternative for periodic solutions of some linear neutral equations and of a generalized Leray-Schauder theory. Although proofs are simple, the results are nontrivial extensions to the neutral case of existence theorems for periodic solutions of functional differential equations.

Hale, J. K.↗

An improved framework for the dynamic likelihood filtering approach to data assimilation

Here, we propose improvements to the Dynamic Likelihood Filter (DLF), a Bayesian data assimilation filtering approach, specifically tailored to wave problems. The DLF approach was developed to address the common challenge in the application of data assimilation to hyperbolic problems in the geosciences and in engineering, where observation systems are sparse in space and time. When these observations have low uncertainties, as compared to model uncertainties, the DLF exploits the inherent nature of information and uncertainties to propagate along characteristics to produce estimates that are phase aware as well as amplitude aware, as would be the case in the traditional data assimilation approach. Along characteristics, the stochastic partial differential equations underlying the linear or nonlinear stochastic dynamics are differential equations. This study focuses on developing the explicit challenges of relating dynamics and uncertainties in the Eulerian and Lagrangian frames via dynamic Gaussian processes. It also implements the approach using the ensemble Kalman filter (EnKF) and compares the DLF approach to the conventional one with respect to wave amplitude and phase estimates in linear and nonlinear wave problems. Numerical comparisons show that the DLF/EnKF outperforms the EnKF estimates, when applied to linear and nonlinear wave problems. This advantage is particularly noticeable when sparse, low uncertainty observations are used.

97 MATHEMATICS AND COMPUTING↗

Exponential Time Differencing Schemes for Fuel Depletion and Transport in Molten Salt Reactors: Theory and Implementation

A numerical framework for modeling depletion and mass transport in liquid-fueled molten salt reactions is presented based on exponential time differencing. The solution method involves using the finite volume method to transform the system of partial differential equations (PDEs) into a much larger system of ordinary differential equations. The key part of this method involves solving for the exponential of a matrix. We explore six different algorithms to compute the exponential in a series of progression problems that explore physical transport phenomena in molten salt reactors. This framework shows good results for solving linear parabolic PDEs with each of the six matrix exponential algorithms. For large problems, the series solvers such as Padé and Taylor have large run times, which can be mitigated by using the Krylov subspace.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Diffusion-Model-Assisted Supervised Learning of Generative Models for Density Estimation

Here, we present a supervised learning framework of training generative models for density estimation. Generative models, including generative adversarial networks (GANs), normalizing flows, and variational auto-encoders (VAEs), are usually considered as unsupervised learning models, because labeled data are usually unavailable for training. Despite the success of the generative models, there are several issues with the unsupervised training, e.g., requirement of reversible architectures, vanishing gradients, and training instability. To enable supervised learning in generative models, we utilize the score-based diffusion model to generate labeled data. Unlike existing diffusion models that train neural networks to learn the score function, we develop a training-free score estimation method. This approach uses mini-batch-based Monte Carlo estimators to directly approximate the score function at any spatial-temporal location in solving an ordinary differential equation (ODE), corresponding to the reverse-time stochastic differential equation (SDE). This approach can offer both high accuracy and substantial time savings in neural network training. Once the labeled data are generated, we can train a simple, fully connected neural network to learn the generative model in the supervised manner. Compared with existing normalizing flow models, our method does not require the use of reversible neural networks and avoids the computation of the Jacobian matrix. Compared with existing diffusion models, our method does not need to solve the reverse-time SDE to generate new samples. As a result, the sampling efficiency is significantly improved. We demonstrate the performance of our method by applying it to a set of 2D datasets as well as real data from the University of California Irvine (UCI) repository.

97 MATHEMATICS AND COMPUTING↗

Analysis and synthesis of distributed-lumped-active networks by digital computer

The use of digital computational techniques in the analysis and synthesis of DLA (distributed lumped active) networks is considered. This class of networks consists of three distinct types of elements, namely, distributed elements (modeled by partial differential equations), lumped elements (modeled by algebraic relations and ordinary differential equations), and active elements (modeled by algebraic relations). Such a characterization is applicable to a broad class of circuits, especially including those usually referred to as linear integrated circuits, since the fabrication techniques for such circuits readily produce elements which may be modeled as distributed, as well as the more conventional lumped and active ones.

Source record↗

Mathematical model of one-man air revitalization system

A mathematical model was developed for simulating the steady state performance in electrochemical CO2 concentrators which utilize (NMe4)2 CO3 (aq.) electrolyte. This electrolyte, which accommodates a wide range of air relative humidity, is most suitable for one-man air revitalization systems. The model is based on the solution of coupled nonlinear ordinary differential equations derived from mass transport and rate equations for the processes which take place in the cell. The boundary conditions are obtained by solving the mass and energy transport equations. A shooting method is used to solve the differential equations.

Source record↗

Parallel architectures for iterative methods on adaptive, block structured grids

A parallel computer architecture well suited to the solution of partial differential equations in complicated geometries is proposed. Algorithms for partial differential equations contain a great deal of parallelism. But this parallelism can be difficult to exploit, particularly on complex problems. One approach to extraction of this parallelism is the use of special purpose architectures tuned to a given problem class. The architecture proposed here is tuned to boundary value problems on complex domains. An adaptive elliptic algorithm which maps effectively onto the proposed architecture is considered in detail. Two levels of parallelism are exploited by the proposed architecture. First, by making use of the freedom one has in grid generation, one can construct grids which are locally regular, permitting a one to one mapping of grids to systolic style processor arrays, at least over small regions. All local parallelism can be extracted by this approach. Second, though there may be a regular global structure to the grids constructed, there will be parallelism at this level. One approach to finding and exploiting this parallelism is to use an architecture having a number of processor clusters connected by a switching network. The use of such a network creates a highly flexible architecture which automatically configures to the problem being solved.

Gannon, D.↗

Non-Gaussian approach for parametric random vibration of non-linear structures

The dynamic response of a nonlinear, single degree of freedom structural system subjected to a physically white noise parametric excitation is investigated. The Ito stochastic calculus is employed to derive a general differential equation for the moments of the response coordinates. The differential equations of moments of any order are found to be coupled with higher order moments. A non-Gaussian closure scheme is developed to truncate the moment equations up to fourth order. The statistical of the stationary response are computed numerically and compared with analytical solutions predicted by a Gaussian closure scheme and the stochastic averaging method. It is found that the computed results exhibit the jump phenomenon which is typical of the characteristics of deterministic nonlinear systems. In addition, the numerical algorithm leads to multiple solutions all of which give positive mean squares. However, two of these solutions are found to violate the properties of high order moments. One solution preserves the moments properties and demonstrates that the system achieves a stationary response.

Ibrahim, R. A.↗

An aeroelastic analysis of helicopter rotor blades incorporating piezoelectric fiber composite twist actuation

A simple aeroelastic analysis of a helicopter rotor blade incorporating embedded piezoelectric fiber composite, interdigitated electrode blade twist actuators is described. The analysis consist of a linear torsion and flapwise bending model coupled with a nonlinear ONERA based unsteady aerodynamics model. A modified Galerkin procedure is performed upon the rotor blade partial differential equations of motion to develop a system of ordinary differential equations suitable for numerical integration. The twist actuation responses for three conceptual full-scale blade designs with realistic constraints on blade mass are numerically evaluated using the analysis. Numerical results indicate that useful amplitudes of nonresonant elastic twist, on the order of one to two degrees, are achievable under one-g hovering flight conditions for interdigitated electrode poling configurations. Twist actuation for the interdigitated electrode blades is also compared with the twist actuation of a conventionally poled piezoelectric fiber composite blade. Elastic twist produced using the interdigitated electrode actuators was found to be four to five times larger than that obtained with the conventionally poled actuators.

Wilkie, W. Keats↗

Aeroelastic Analysis of Helicopter Rotor Blades Incorporating Anisotropic Piezoelectric Twist Actuation

A simple aeroelastic analysis of a helicopter rotor blade incorporating embedded piezoelectric fiber composite, interdigitated electrode blade twist actuators is described. The analysis consists of a linear torsion and flapwise bending model coupled with a nonlinear ONERA based unsteady aerodynamics model. A modified Galerkin procedure is performed upon the rotor blade partial differential equations of motion to develop a system of ordinary differential equations suitable for dynamics simulation using numerical integration. The twist actuation responses for three conceptual fullscale blade designs with realistic constraints on blade mass are numerically evaluated using the analysis. Numerical results indicate that useful amplitudes of nonresonant elastic twist, on the order of one to two degrees, are achievable under one-g hovering flight conditions for interdigitated electrode poling configurations. Twist actuation for the interdigitated electrode blades is also compared with the twist actuation of a conventionally poled piezoelectric fiber composite blade. Elastic twist produced using the interdigitated electrode actuators was found to be four to five times larger than that obtained with the conventionally poled actuators.

Wilkie, W. Keats↗

Taylor wave solution for a general equation of state

This document describes a solution procedure for calculating the Taylor wave behind an unsupported Chapman–Jouguet (CJ) detonation in planar, cylindrical, and spherical geometries given a general equation of state. The resulting semi-analytic solution can be utilized to examine new equation of state models for detonation products and during the verification of hydrodynamic codes. The governing partial differential equations are reduced to ordinary differential equations in both characteristic and self-similar forms. The first-order systems corresponding to each geometry are amenable to solution numerically using commonly available methods. A difficulty arises at the CJ point in radial coordinates where the similarity equations become singular. Two separate strategies are proposed to integrate the first-order system. The first one uses an asymptotic approximation near the CJ point that can be used to perturb the boundary conditions. The second one applies a change of variables which removes the singularity at the expense of an additional equation to be integrated. A test problem is provided for the Davis products equation of state to illustrate the qualitative features of the Taylor wave in each geometric configuration and compared with a Lagrangian hydrodynamics research code. A Python code listing gives an implementation using the SciPy library to assists users in generating the results.

97 MATHEMATICS AND COMPUTING↗

Smoothing properties of neutral equations

A neutral functional differential equation is defined as d/dt(Dx sub t) = f(x sub t), with D linear, continuous, atomic at zero. The solution generally is no smoother than the initial data after any finite number of steps. A more restrictive class of D-operators for which some smoothing takes place after an infinite number of steps is defined. This result indicates that a solution can be in an omega-limit set only if it corresponds to initial data which are smooth. A space which can be considered as a Banach space with the topology of uniform convergence is also defined.

Hale, J. K.↗

Chandrasekhar equations for infinite dimensional systems

Chandrasekhar equations are derived for linear time invariant systems defined on Hilbert spaces using a functional analytic technique. An important consequence of this is that the solution to the evolutional Riccati equation is strongly differentiable in time and one can define a strong solution of the Riccati differential equation. A detailed discussion on the linear quadratic optimal control problem for hereditary differential systems is also included.

Ito, K.↗