Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High precision measurements of the proton elastic electromagnetic form factors and their ratio at 𝑄 2 = 0.50, 2.64, 3.20, and 4.10 GeV 2

The advent of high-intensity, high-polarization electron beams led to significantly improved measurements of the ratio of the proton’s charge to electric form factors, 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 . However, high-𝑄 2 measurements of this ratio yielded significant disagreement with extractions based on unpolarized scattering measurements, raising questions about the reliability of the measurements and consistency of the techniques. Jefferson Lab experiment E01-001 was designed to provide a high precision extraction of 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 from unpolarized cross-section measurements using a modified version of the Rosenbluth separation technique to allow for a more precise comparison with polarization data. Rosenbluth separations involve precise measurements of the angular dependence of the elastic 𝑒−𝑝 cross section at fixed momentum transfer, 𝑄 2 . Conventional Rosenbluth separations detect the scattered electron, requiring the comparisons of measurements with very different detected electron energy and rate for electrons at different angles. Our ‘‘super-Rosenbluth’’ measurement detected the struck proton, rather than the scattered electron to extract the elastic 𝑒−𝑝 cross section. This yielded a fixed momentum for the detected particle and dramatically reduced variation of the cross section with angle, significantly reducing rate- and momentum-dependent corrections and uncertainties. We measure the cross section vs angle with high relative precision, allowing for extremely high precision extractions of 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 at 𝑄 2 = 2.64, 3.20, and 4.10 GeV 2 . Our results are consistent with traditional Rosenbluth extractions, but with much smaller corrections and systematic uncertainties, comparable to the uncertainties from polarization measurements. Our data confirm the discrepancy between Rosenbluth and polarization extractions of the proton form factor ratio using an improved Rosenbluth extraction that yields smaller and less-correlated uncertainties than those typical of previous Rosenbluth extractions. Here, we compare our results to calculations of two-photon exchange effects and find that the observed discrepancy can be relatively well explained by such effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

In-medium $\Delta (1232)$ potential, pion production in heavy-ion collisions and the symmetry energy

Using the dcQMD transport model, the isoscalar and isovector in-medium potentials of the Δ (1232) baryon are studied and information regarding their effective strength is obtained from a comparison to experimental pion production data in heavy-ion collisions below 800 MeV/nucleon impact energy. The best description is achieved for an isoscalar potential moderately more attractive than the nucleon optical potential and a rather small isoscalar relative effective mass $m$$^{*}_{Δ}$ ≈ 0.45. For the isovector component only a constraint between the potential’s strength at saturation and the isovector effective mass difference can be extracted, which depends on quantities such as the slope of the symmetry energy and the neutron-proton effective mass difference. These results are incompatible with the usual assumption, in transport models, that the Δ (1232) and nucleon potentials are equal. The density dependence of symmetry energy can be studied using the high transverse momentum tail of pion multiplicity ratio spectra. Results are however correlated with the value of neutron-proton effective mass difference. Furthermore, this region of spectra is shown to be affected by uncertain model ingredients such as the pion potential or in-medium correction to inelastic scattering cross-sections at levels smaller than 10%. Extraction of precise constraints for the density dependence of symmetry energy above saturation will require experimental data for pion production in heavy-ion collisions below 800 MeV/nucleon impact energy and experimental values for the high transverse momentum tail of pion multiplicity ratio spectra accurate to better than 5%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

TRT Compton Scattering Data: Comparisons between LLNL and LANL: Pointwise

This memo is one of a pair of reports comparing Compton scattering data in the context of thermal radiation transport (TRT). This document focuses on Pointwise (PW) data while the other report focuses on Multigroup (MG) data. These complementary analyses, via PW comparisons, show if the same physics are used and if fundamental bugs are present, and, via MG comparisons, quantify macroscopic Compton effects such as mean amplification factors. No averaging of Compton data over photon energy is done for the PW comparisons, while lab-dependent numerical resolution choices become relevant for the MG comparisons. This document plots and quantifies differences in PW Compton scattering data between LANL and LLNL for four disparate temperatures on a logarithmically-spaced energy grid. PW comparisons means we use the received LLNL data as-is, without any averaging or integration over energy. In addition to LANL-to-LLNL comparisons, we investigate the impact of numerical choices on LANL PW data. For the purposes of this comparison, we neglect induced scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

On the prediction of pressure effects for the combination kinetics of two alkyl radicals with the geometric mean rule

Here, alkyl combination reactions, along with their reverse alkane unimolecular decomposition reactions, are widely present in pyrolysis and combustion systems. These reactions occur mainly at temperatures at which their rate coefficients depend on pressure, and only a few studies have explored this dependence for large size alkyls. The accurate calculation of these kinetic data is limited by the size of the alkyl fragments involved, since the theoretical methods used are computationally expensive. Therefore, little reliable data is available for the modeling of real fuels alkane decomposition kinetics. In this paper, we propose an alternative approach that allows an accurate estimation of pressure-dependent kinetic rates for the combination of long-chain alkyl radicals, based on tabulated reaction models. The rates of combination of linear alkyls radicals forming ethane to pentane were calculated using the CASPT2-F12/cc-pVDZ-F12 level within VRC-TST theory combined with master-equation simulations. The computed high-pressure limit rate coefficients showed that n-propyl could be a minimum-size representative structure for larger n-alkyl chain, but this approach fails to capture the pressure dependence of the reaction that remains size-dependent for larger alkyls. The Geometric Mean Rule (GMR), a simple rule that links the self and cross-reactions of three alkyl radicals, is used to address this issue. Our theoretical calculations show for the first time that the GMR applies not only at the high-pressure limit, but also for every pressure explored. The GMR is shown to be accurate, with a maximum 22 % deviation in the falloff region for the estimation of rates for small alkyl combinations. Using this method, we propose a tabulated reaction rate rule for the combination of alkyl radicals up to C5+C5. The use of computed rate coefficients with the GMR approximation opens ways to develop pressure-dependent reaction rate rules for large n-alkyl combinations, based on accurate and computationally expensive theoretical calculations on smaller alkyl fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transverse momentum dependent feed-down fractions for bottomonium production

We extract transverse-momentum-dependent feed-down fractions for bottomonium production using a data-driven approach. We use data published by the ATLAS, CMS, and LHCb Collaborations for √𝑠 =7 TeV proton-proton collisions. Based on this collected data, we produce fits to the differential cross sections for the production of both 𝑆- and 𝑃-wave bottomonium states. Combining these fits with branching ratios for excited state decays from the Particle Data Group, we compute the feed-down fractions for both the ϒ⁡(1⁢𝑆) and ϒ⁡(2⁢𝑆) as a function of transverse momentum. Our results indicate a strong dependence on transverse momentum, which is consistent with prior extractions of the feed-down fractions. When evaluated at the average momentum of the states, we find that approximately 75% of ϒ⁡(1⁢𝑆) and ϒ⁡(2⁢𝑆) states are produced directly. Our results for the transverse-momentum-dependent feed-down fractions are provided in tabulated form so that they can be used by other research groups.

Astronomy & Astrophysics↗
DOE OSTI2026

Data Driven Correlated Noise Simulation for the ICEBERG LArTPC

Accurate electronic-noise simulation is essential for low-energy physics in liquid-argon TPCs. More realistic noise modeling allows us to better tune reconstruction algorithms and more reliably assess and optimize signal-detection thresholds. We present a data-driven noise simulation framework developed for the ICEBERG test stand for DUNE that generates synthetic noise waveforms that reproduce both (i) the measured per-channel magnitude of the Fast Fourier Transform (FFT) and (ii) frequency-dependent channel-to-channel correlations observed in ICEBERG noise data. Using a dedicated noise-only dataset, we build a compact noise model containing per-channel FFT-magnitude targets together with a small set of band-wise cross-wire color matrices. White noise is generated in the frequency domain by drawing circular-symmetric complex Gaussian coefficients with random phases and scaling them to match the measured FFT-magnitude targets, and cross-wire correlations are subsequently imposed using the stored color matrices. The model and algorithm were integrated into the LArSoft + Wire-Cell Toolkit simulation chain and validated by comparing waveform structure, frequency-domain spectra, and band-limited correlation matrices from simulated noise and ICEBERG data. This approach can be extended to other LArTPC operating conditions.

Ghosh, Avik [Iowa State U.]↗
DOE OSTI2021

Analysis of Seismic Signals Generated by Vehicle Traffic with Application to Derivation of Subsurface Q-Values

Correct identification and modeling of anthropogenic sources of ground motion are of considerable importance for many studies, including detection of small earthquakes and imaging seismic properties below the surface. Here, to understand signals generated by common vehicle traffic, we use seismic data recorded by closely spaced geophones normal to roads at two sites on San Jacinto fault zone. To quantify the spatiotemporal and frequency variations of the recorded ground motions, we develop a simple analytical solution accounting for propagation and attenuation of surface waves. The model reproduces well-observed bell-shaped spectrograms of car signals recorded by geophones close to roads, and it can be used to estimate frequency-dependent Q-values of the subsurface materials. The data analysis indicates Q-values of 3–40, for frequencies up to 150 Hz for road-receiver paths at the two examined sites. The derived Q-values are consistent with attenuation factors of surface waves previously obtained with other methods. The analytical results and analysis procedure provide a highly efficient method for deriving Q-values of shallow subsurface materials.

58 GEOSCIENCES↗
DOE OSTI2021

Reynolds stress tensor measurements using magnetic resonance velocimetry: expansion of the dynamic measurement range and analysis of systematic measurement errors

This study presents magnetic resonance velocimetry (MRV) Reynolds Stress measurements in a periodic hill channel with a hill Reynolds number of Re = 29,500. The velocity encoding scheme is based on the ICOSA6 method with six icosahedral encoding directions and multiple encoding values are measured to increase the dynamic range. The full Reynolds stress tensor is obtained from a voxel-wise three-dimensional Gaussian fit using the magnitude data of all acquisitions. The MRV results are compared to a wall-resolved large eddy simulation and laser Doppler velocimetry measurements conducted in the same channel. It is shown that the MRV Reynolds stress data have excellent precision and agree qualitatively with the reference data. However, there are apparent systematic deviations. One of the most prominent error contributions is the signal attenuation caused by higher orders of motion, which leads to an overestimation of the turbulence level. Another fundamental error is identified in the assumption that the turbulence is Gaussian distributed. With the presented reconstruction technique, the MRV data are fitted to a statistical model, and depending on the examined flow setup, the Gaussian model can lead to considerable errors. Possible ways of how to reduce all identified errors are presented. In summary, this technique enables Reynolds stress tensor measurements in complex internal flows with high dynamic range and excellent precision. However, several issues need to be resolved to make the turbulence quantification more accurate.

42 ENGINEERING↗
DOE OSTI2026

Evaluating hydrogen permeation through medium-density and high-density polyethylene pipes to enable a hydrogen-compatible infrastructure

As the United States and the global community pursue energy abundance and resilience, hydrogen is becoming a critical energy carrier. The future of hydrogen transport depends on one thing: verifying that today’s pipelines are hydrogen ready. This study investigates the permeation behavior of medium-density polyethylene (MDPE) and high-density polyethylene (HDPE) pipelines under pure hydrogen gas environment at various pressures and temperatures. Using thermal desorption analysis (TDA) and direct pipe permeability measurements, hydrogen loss rates are quantified, revealing minimal permeation losses (< 10.5 g/km/day) under realistic operating conditions. Effects of temperature and pressure with Standard Dimension Ratios (SDR), were evaluated to determine their influence on permeation rates of MDPE and HDPE pipelines. In addition, ex-situ density and degree of crystallinity (DOC) of MDPE and HDPEs after hydrogen exposure were also investigated to understand pressure-dependency of polymer properties. The findings provide essential data for assessing polymer-based pipeline materials for safe and reliable hydrogen transport.

08 HYDROGEN↗
DOE OSTI2021

Kinetically Controlled Synthesis of Rhodium Nanocrystals with Different Shapes and a Comparison Study of Their Thermal and Catalytic Properties

Here, we report the synthesis of Rh nanocrystals with different shapes by controlling the kinetics involved in the growth of preformed Rh cubic seeds. Specifically, Rh nanocrystals with cubic, cuboctahedral, and octahedral shapes can all be obtained from the same cubic seeds under suitable reduction kinetics for the precursor. The success of such a synthesis also relies on the use of a halide-free precursor to avoid oxidative etching, as well as the involvement of a sufficiently high temperature to remove Br – ions from the seeds while ensuring adequate surface diffusion. The availability of Rh nanocrystals with cubic and octahedral shapes allows for an evaluation of the facet dependences of their thermal and catalytic properties. The data from in situ electron microscopy studies indicate that the cubic and octahedral Rh nanocrystals can keep their original shapes up to 700 and 500 °C, respectively. When tested as catalysts for hydrazine decomposition, the octahedral nanocrystals exhibit almost 4-fold enhancement in terms of H 2 selectivity relative to the cubic counterpart. As for ethanol oxidation, the order is reversed, with the cubic nanocrystals being about three times more active than the octahedral sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

MODIS Aerosol and Low‐Cloud Retrievals: Orographic Effects in the Wake of Macquarie Island

Abstract Visible/infrared imagery from passive satellites is commonly relied upon to study low cloud microphysics over oceanic regions, including for the Southern Ocean (SO), but relatively little validation has been undertaken for the SO. In this article, we compare low‐cloud effective radius ( r e ), cloud droplet number concentration ( N d ) and cloud liquid water path (LWP) retrievals from the NASA Moderate Imaging Spectroradiometer (MODIS) with surface measurements collected during the Macquarie Island Cloud and Radiation Experiment (MICRE). MODIS 3.7‐μm band retrievals show little bias and moderately good correlation relative to MICRE retrievals for liquid‐phase low clouds when restricted to Solar Zenith Angles <65° on spatial scales of 50–100 km. However, the low overall bias in 3.7‐μm band effective radius ( r e 3.7 ) retrievals partly results from cancellation of errors: r e 3.7 is overestimated for non‐to‐lightly precipitating clouds, and underestimated for heavier drizzling clouds by ∼1–1.5 μm. 1.6‐μm and 2.1‐μm band r e retrievals are biased high. N d may likewise be slightly under‐ or overestimated depending on the concentration, but there is insufficient data to provide confidence in this result. Interestingly, a composite of MODIS retrievals from 2002 to 2020 show a distinct region of enhanced cloud cover and N d (and lower r e ) in the wake of Macquarie Island associated with orographic cloud formation. MODIS retrievals of aerosol optical depth (AOD) and Angstrom Exponent (AE) upwind and downwind of the island do not differ significantly. Comparison with MICRE measurements suggests that MODIS Collection 6 AOD retrievals are reasonable, while AE is problematically large.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

3D multi-system Bayesian calibration with energy conservation to study rapidity-dependent dynamics of nuclear collisions

Considerable information about the early-stage dynamics of heavy ion collisions is encoded in the rapidity dependence of measurements. To leverage the large amount of experimental data, we perform a systematic analysis using three-dimensional hydrodynamic simulations of multiple collision systems — large and small, symmetric and asymmetric. Specifically, we perform fully 3D multi-stage hydrodynamic simulations initialized by a parameterized model for rapidity-dependent energy deposition, which we calibrate on the hadron multiplicity and anisotropic flow coefficients. We utilize Bayesian inference to constrain properties of the early- and late-time dynamics of the system, and highlight the impact of enforcing global energy conservation in our 3D model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

State predictive information bottleneck

We report the ability to make sense of the massive amounts of high-dimensional data generated from molecular dynamics simulations is heavily dependent on the knowledge of a low-dimensional manifold (parameterized by a reaction coordinate or RC) that typically distinguishes between relevant metastable states, and which captures the relevant slow dynamics of interest. Methods based on machine learning and artificial intelligence have been proposed over the years to deal with learning such low-dimensional manifolds, but they are often criticized for a disconnect from more traditional and physically interpretable approaches. To deal with such concerns, in this work we propose a deep learning based state predictive information bottleneck approach to learn the RC from high-dimensional molecular simulation trajectories. We demonstrate analytically and numerically how the RC learnt in this approach is connected to the committor in chemical physics and can be used to accurately identify transition states. A crucial hyperparameter in this approach is the time delay or how far into the future the algorithm should make predictions about. Through careful comparisons for benchmark systems, we demonstrate that this hyperparameter choice gives useful control over how coarse-grained we want the metastable state classification of the system to be. We thus believe that this work represents a step forward in systematic application of deep learning based ideas to molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Waveform retrieval for ultrafast applications based on convolutional neural networks

Electric field waveforms of light carry rich information about dynamical events on a broad range of timescales. The insight that can be reached from their analysis, however, depends on the accuracy of retrieval from noisy data. In this article, we present a novel approach for waveform retrieval based on supervised deep learning. We demonstrate the performance of our model by comparison with conventional denoising approaches, including wavelet transform and Wiener filtering. The model leverages the enhanced precision obtained from the nonlinearity of deep learning. The results open a path toward an improved understanding of physical and chemical phenomena in field-resolved spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Simulations of tokamak edge plasma turbulent fluctuations based on a minimal 3D model

In this study, a new simulation model for tokamak boundary plasma, SOLT3D, is implemented in the BOUT++ framework. The simulation model includes a set of dynamic equations describing collisional boundary plasma and neutral gas in the tokamak scrape-off layer and divertor region. The model is verified against standard linear plasma instabilities and available nonlinear results. For L-mode like conditions, SOLT3D reproduces characteristics of boundary plasma turbulent fluctuations that are similar to published experimental data, in terms of the amplitude and spatial dependence of the fluctuations. It also reproduces realistic plasma fluxes on material surfaces and expected Bohm-like effective radial transport. Plasma fluctuations inferred from the simulations imply inevitably a significant level of intrinsic 'noise' for axisymmetric tokamak plasma transport modeling, introducing errors on the order of unity. In particular, the toroidally averaged atomic rates below 5–10 eV are strongly modified by turbulent plasma fluctuations, which should significantly affect the standard axisymmetric modeling of the tokamak edge plasma and divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Simple and statistically sound recommendations for analysing physical theories

Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by multiple experiments, and random or grid sampling of model parameters. Whilst these methods are easy to apply, they exhibit pathologies even in low-dimensional parameter spaces, and quickly become problematic to use and interpret in higher dimensions. In this article we give clear guidance for going beyond these procedures, suggesting where possible simple methods for performing statistically sound inference, and recommendations of readily-available software tools and standards that can assist in doing so. Our aim is to provide any physicists lacking comprehensive statistical training with recommendations for reaching correct scientific conclusions, with only a modest increase in analysis burden. Furthermore, our examples can be reproduced with the code publicly available at Zenodo.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Bilinear dynamic mode decomposition for quantum control

Abstract Data-driven methods for establishing quantum optimal control (QOC) using time-dependent control pulses tailored to specific quantum dynamical systems and desired control objectives are critical for many emerging quantum technologies. We develop a data-driven regression procedure, bilinear dynamic mode decomposition (biDMD), that leverages time-series measurements to establish quantum system identification for QOC. The biDMD optimization framework is a physics-informed regression that makes use of the known underlying Hamiltonian structure. Further, the biDMD can be modified to model both fast and slow sampling of control signals, the latter by way of stroboscopic sampling strategies. The biDMD method provides a flexible, interpretable, and adaptive regression framework for real-time, online implementation in quantum systems. Further, the method has strong theoretical connections to Koopman theory, which approximates nonlinear dynamics with linear operators. In comparison with many machine learning paradigms minimal data is needed to construct a biDMD model, and the model is easily updated as new data is collected. We demonstrate the efficacy and performance of the approach on a number of representative quantum systems, showing that it also matches experimental results.

97 MATHEMATICS AND COMPUTING↗