Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “construction type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Fabrication and Evaluation of Graphite Fiber-Reinforced Polyimide Composite Tube Forms Using Modified Resin Transfer Molding

The techniques necessary for the fabrication of a complex three-dimensional tubular form using a PMR-type resin have been developed to allow for the construction of several tubes with good physical and mechanical properties. Employing established resin transfer molding practices, the relatively non-hazardous AMB-21 in acetone formulation was used to successfully impregnate four layers of AS4 braided graphite fiber preform previously loaded around an aluminum cylindrical core in an enclosed mold cavity. Using heat and vacuum, the solvent was evaporated to form a prepreg followed by a partial imidization and removal of condensation products. The aluminum core was replaced by a silicone rubber bladder and the cure cycle continued to the final stage of 550 F with a bladder internal pressure of 200 lbs/sq in while simultaneously applying a strong vacuum to the prepreg for removal of any additional imidization products. A combination of several modifications to the standard resin transfer molding methodology enabled the mold to 'breathe', allowing the imidization products a pathway for escape. AMB-21 resin was chosen because of the carcinogenic nature of the primary commercial polyimide PMR-15. The AMB-21 resin was formulated using commercially available monomers or monomer precursors and dissolved in a mixture of methyl alcohol and acetone. The viscosity of the resulting monomer solution was checked by use of a Brookfield rheometer and adjusted by adding acetone to an easily pumpable viscosity of about 600 cP. In addition, several types of chromatographic and thermal analyses were of the braids, and excess handling of the preforms broke some of the microscopic fibers, needlessly decreasing the strength of the finished part. In addition, three dimensional braided preforms with fibers along the length of the tube will be significantly stronger in tension than the braided preforms used in this study.

Exum, Daniel B.↗

A new classification scheme of plastic wastes based upon recycling labels

Highlights: • PET, HPDE or PP types of plastics are considered. • An automated classification of plastic bottles based on the feature extraction and classification methods is performed. • The decision mechanism consists of PCA, Kernel PCA, FLDA, SVD and Laplacian Eigenmaps methods. • SVM is selected to achieve the classification task and majority voting technique is used. - Abstract: Since recycling of materials is widely assumed to be environmentally and economically beneficial, reliable sorting and processing of waste packaging materials such as plastics is very important for recycling with high efficiency. An automated system that can quickly categorize these materials is certainly needed for obtaining maximum classification while maintaining high throughput. In this paper, first of all, the photographs of the plastic bottles have been taken and several preprocessing steps were carried out. The first preprocessing step is to extract the plastic area of a bottle from the background. Then, the morphological image operations are implemented. These operations are edge detection, noise removal, hole removing, image enhancement, and image segmentation. These morphological operations can be generally defined in terms of the combinations of erosion and dilation. The effect of bottle color as well as label are eliminated using these operations. Secondly, the pixel-wise intensity values of the plastic bottle images have been used together with the most popular subspace and statistical feature extraction methods to construct the feature vectors in this study. Only three types of plastics are considered due to higher existence ratio of them than the other plastic types in the world. The decision mechanism consists of five different feature extraction methods including as Principal Component Analysis (PCA), Kernel PCA (KPCA), Fisher’s Linear Discriminant Analysis (FLDA), Singular Value Decomposition (SVD) and Laplacian Eigenmaps (LEMAP) and uses a simple experimental setup with a camera and homogenous backlighting. Due to the giving global solution for a classification problem, Support Vector Machine (SVM) is selected to achieve the classification task and majority voting technique is used as the decision mechanism. This technique equally weights each classification result and assigns the given plastic object to the class that the most classification results agree on. The proposed classification scheme provides high accuracy rate, and also it is able to run in real-time applications. It can automatically classify the plastic bottle types with approximately 90% recognition accuracy. Besides this, the proposed methodology yields approximately 96% classification rate for the separation of PET or non-PET plastic types. It also gives 92% accuracy for the categorization of non-PET plastic types into HPDE or PP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of accumulated nuclear fuel in South Korea with scenario

In this work, the AMORES Program which automatically prepares ORIGEN-S inputs, executes ORIGEN-S, and edits ORIGEN-S outputs based on the spent nuclear fuel (SNF) data and scenario on the nuclear power plant construction was introduced and applied to analyze the inventories, heat generations, radioactivities, and radio-toxicities of the SNFs generated in South Korea with realistic SNF data up to 2015 and three scenarios on the future NPP construction and operation from 2016 to 2035 or 2053. The scenario study for PWR shows that the scenario considering the most cancellations of the future NPPs shows 12.7%, 24.1%, 25.3%, and 15.7% reductions of the spent nuclear fuel inventories, radioactivities, thermal heat generations, and the radio toxicities, respectively at 2035, in comparison with the most optimistic scenario of NPPs construction. Also, the nuclide-wise decomposition was performed to show the nuclide-wise contributions to the total heat generation and radioactivity of the accumulated SNFs, which showed that the heat generation, radioactivity, and radio-toxicity of CANDU SNFs have significantly lower values due to the lower discharge burnup and no operation of CANDUs after 2027 than the PWR SNFs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

On the reflection type decomposition of the adjoint reduced phase space of a compact semisimple Lie group

We consider a system with symmetries whose configuration space is a compact Lie group, acted upon by inner automorphisms. The classical reduced phase space of this system decomposes into connected components of orbit type subsets. To investigate hypothetical quantum effects of this decomposition one has to construct the associated costratification of the Hilbert space of the quantum system in the sense of Huebschmann. In the present paper, instead of the decomposition by orbit types, we consider the related decomposition by reflection types (conjugacy classes of reflection subgroups). These two decompositions turn out to coincide, e.g., for the classical groups SU(n) and Sp(n). We derive defining relations for reflection type subsets in terms of irreducible characters and discuss how to obtain from that the corresponding costratification of the Hilbert space of the system. To illustrate the method, we give explicit results for some low rank classical groups.

97 MATHEMATICS AND COMPUTING↗

Proton decay and lepton flavor violation in SUSY SO(10) GUT

Diverse mass and mixing patterns between the quarks and leptons makes it challenging to construct a simple grand unified theory of flavor. The SO(10) SUSY GUT with type II seesaw mechanism giving neutrino masses provide a natural framework for addressing this issue. Proton decay suppression is also an important issue to construct SUSY GUT models. We will investigate the flavor structure which are favored to suppress proton decay in SUSY GUT models. The structure in the SO(10) GUT model provides a prediction of the neutrino mixing, and the lepton flavor violating decays will be an important probe of the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light cones in relativity: Real, complex, and virtual, with applications

We study geometric structures associated with shear-free null geodesic congruences in Minkowski space-time and asymptotically shear-free null geodesic congruences in asymptotically flat space-times. We show how in both the flat and asymptotically flat settings, complexified future null infinity I{sub C}{sup +} acts as a ''holographic screen,'' interpolating between two dual descriptions of the null geodesic congruence. One description constructs a complex null geodesic congruence in a complex space-time whose source is a complex worldline, a virtual source as viewed from the holographic screen. This complex null geodesic congruence intersects the real asymptotic boundary when its source lies on a particular open-string type structure in the complex space-time. The other description constructs a real, twisting, shear-free or asymptotically shear-free null geodesic congruence in the real space-time, whose source (at least in Minkowski space) is in general a closed-string structure: the caustic set of the congruence. Finally we show that virtually all of the interior space-time physical quantities that are identified at null infinity I{sup +} (center of mass, spin, angular momentum, linear momentum, and force) are given kinematic meaning and dynamical descriptions in terms of the complex worldline.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MODELING X-RAY BINARY EVOLUTION IN NORMAL GALAXIES: INSIGHTS FROM SINGS

We present the largest-scale comparison to date between observed extragalactic X-ray binary (XRB) populations and theoretical models of their production. We construct observational X-ray luminosity functions (oXLFs) using Chandra observations of 12 late-type galaxies from the Spitzer Infrared Nearby Galaxy Survey. For each galaxy, we obtain theoretical XLFs (tXLFs) by combining XRB synthetic models, constructed with the population synthesis code StarTrack, with observational star formation histories (SFHs). We identify highest-likelihood models both for individual galaxies and globally, averaged over the full galaxy sample. Individual tXLFs successfully reproduce about half of the oXLFs, but for some galaxies we are unable to find underlying source populations, indicating that galaxy SFHs and metallicities are not well matched and/or that XRB modeling requires calibration on larger observational samples. Given these limitations, we find that the best models are consistent with a product of common envelope ejection efficiency and central donor concentration {approx_equal} 0.1, and a 50% uniform-50% ''twins'' initial mass-ratio distribution. We present and discuss constituent subpopulations of tXLFs according to donor, accretor, and stellar population characteristics. The galaxy-wide X-ray luminosity due to low-mass and high-mass XRBs, estimated via our best global model tXLF, follows the general trend expected from the L{sub X} -star formation rate and L{sub X} -stellar mass relations of Lehmer et al. Our best models are also in agreement with modeling of the evolution of both XRBs over cosmic time and of the galaxy X-ray luminosity with redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

New heavenly double copies

The double copy relates scattering amplitudes and classical solutions in Yang-Mills theory, gravity, and related field theories. Previous work has shown that this has an explicit realisation in self-dual YM theory, where the equation of motion can be written in a form that maps directly to Plebański’s heavenly equation for self-dual gravity. The self-dual YM equation involves an area-preserving diffeomorphism algebra, two copies of which appear in the heavenly equation. In this paper, we show that this construction is a special case of a wider family of heavenly-type examples, by (i) performing Moyal deformations, and (ii) replacing the area-preserving diffeomorphisms with a less restricted algebra. As a result, we obtain a double-copy interpretation for hyper-Hermitian manifolds, extending the previously known hyper-Kähler case. We also introduce a double-Moyal deformation of the heavenly equation. The examples where the construction of Lax pairs is possible are manifestly consistent with Ward’s conjecture, and suggest that the classical integrability of the gravity-type theory may be guaranteed in general by the integrability of at least one of two gauge-theory-type single copies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supercharacters of Unipotent and Solvable Groups

The notion of the supercharacter theory was introduced by P. Diaconis and I. M. Isaaks in 2008. In this paper, we present a review of the main notions and facts of the general theory and discuss the construction of the supercharacter theory for algebra groups and the theory of basic characters for unitriangular groups over a finite field. Based on his earlier papers, the author constructs the supercharacter theory for finite groups of triangular type. The structure of the Hopf algebra of supercharacters for triangular groups over finite fields is also characterized.

97 MATHEMATICS AND COMPUTING↗

Influence of post deposition annealing on the microstructural evolution and tensile behavior of austenitic stainless-steel alloy 709 made by laser powder bed fusion

Structural materials used in the next generation nuclear reactors or other advanced energy systems are often required to withstand higher operating temperatures for a longer service life. Alloy 709 (A709), a Nb-containing and N-stabilized Fe-25Ni-20Cr austenitic stainless steel, has been recommended for high-temperature reactor constructions due to the better performance over the baseline Type 316H stainless steel. Here, in the current manuscript, for the first time, the microstructure evolution and tensile behavior of an A709 made by laser powder bed fusion (LPBF) is discussed. The as deposited and heat treated LPBF alloys are compared with a reference wrought alloy. Owing to the chemical segregation and a higher number of dislocations, the LPBF materials show a significantly higher density of precipitates formed during high temperature treatments when compared to the wrought samples. This is reflected when looking at the tensile properties, both at room and elevated temperatures, where LPBF samples show higher strengths compared to wrought materials.

36 MATERIALS SCIENCE↗

Analysis of filamentous process induction and nuclear localization properties of the HSV-2 serine/threonine kinase Us3

The Us3 serine/threonine kinase encoded by all alphaherpesviruses performs several important functions during virus multiplication. For example, expression of pseudorabies virus (PRV) Us3 causes reorganization of the actin cytoskeleton into filamentous processes (FPs) that promote cell-to-cell spread of virus infection. PRV Us3-induced FP formation requires Us3 kinase activity. To determine whether these characteristics were shared by HSV-2 Us3, expression plasmids for wild type (WT) and kinase dead (KD) Us3 variants were constructed. Expression of WT Us3 resulted in robust FP formation whereas expression of the KD Us3 variants did not. In the course of these experiments we noted that KD/K220 mutant Us3s were excluded from the nucleus in comparison to WT or KD/D305A Us3, prompting us to investigate Us3 nuclear shuttling properties. Herein we describe determinants of HSV-2 Us3-induced FP formation and present evidence for the presence of a leucine-rich nuclear export signal within HSV-2 Us3.

60 APPLIED LIFE SCIENCES↗

Biochemical and Structural Characterization of Germicidin Synthase: Analysis of a Type III Polyketide Synthase That Employs Acyl-ACP as a Starter Unit Donor

Germicidin synthase (Gcs) from Streptomyces coelicolor is a type III polyketide synthase (PKS) with broad substrate flexibility for acyl groups linked through a thioester bond to either coenzyme A (CoA) or acyl carrier protein (ACP). Germicidin synthesis was reconstituted in vitro by coupling Gcs with fatty acid biosynthesis. Since Gcs has broad substrate flexibility, we directly compared the kinetic properties of Gcs with both acyl-ACP and acyl-CoA. The catalytic efficiency of Gcs for acyl-ACP was 10-fold higher than for acyl-CoA, suggesting a strong preference toward carrier protein starter unit transfer. The 2.9 {angstrom} germicidin synthase crystal structure revealed canonical type III PKS architecture along with an unusual helical bundle of unknown function that appears to extend the dimerization interface. A pair of arginine residues adjacent to the active site affect catalytic activity but not ACP binding. This investigation provides new and surprising information about the interactions between type III PKSs and ACPs that will facilitate the construction of engineered systems for production of novel polyketides.

59 BASIC BIOLOGICAL SCIENCES↗

N=2 supersymmetric extension of a hydrodynamic system in Riemann invariants

In this paper, we formulate an N=2 supersymmetric extension of a hydrodynamic-type system involving Riemann invariants. The supersymmetric version is constructed by means of a superspace and superfield formalism, using bosonic superfields, and consists of a system of partial differential equations involving both bosonic and fermionic variables. We make use of group-theoretical methods in order to analyze the extended model algebraically. Specifically, we calculate a Lie superalgebra of symmetries of our supersymmetric model and make use of a general classification method to classify the one-dimensional subalgebras into conjugacy classes. As a result we obtain a set of 401 one-dimensional nonequivalent subalgebras. For selected subalgebras, we use the symmetry reduction method applied to Grassmann-valued equations in order to determine analytic exact solutions of our supersymmetric model. These solutions include traveling waves, bumps, kinks, double-periodic solutions, and solutions involving exponentials and radicals.

97 MATHEMATICS AND COMPUTING↗

Electron Cyclotron Resonance Heating for W7-X

The HELIAS-type Stellarator Wendelstein 7-X, which is currently under construction in Greifswald, Germany, will be equipped with a 140 GHz, 10 MW, CW ECRH system. It will be the main plasma heating system for W7-X. The key features and capabilities of the ECRH plant will be discussed together with the envisaged start-up and heating scenarios. We also report on the ECRH stray radiation test facility MISTRAL and on the extension of the gyrotron frequency range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Supersymmetric reciprocal transformation and its applications

The supersymmetric analog of the reciprocal transformation is introduced. This is used to establish a transformation between one of the supersymmetric Harry Dym equations and the supersymmetric modified Korteweg-de Vries equation. The reciprocal transformation, as a Baecklund-type transformation between these two equations, is adopted to construct a recursion operator for the supersymmetric Harry Dym equation. By proper factorization of the recursion operator, a bi-Hamiltonian structure is found for the supersymmetric Harry Dym equation. Furthermore, a supersymmetric Kawamoto equation is proposed and is associated with the supersymmetric Sawada-Kotera equation. The recursion operator and odd bi-Hamiltonian structure of the supersymmetric Kawamoto equation are also constructed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supersymmetric Ito equation: Bosonization and exact solutions

Based on the bosonization approach, the N=1 supersymmetric Ito (sIto) system is changed to a system of coupled bosonic equations. The approach can effectively avoid difficulties caused by intractable fermionic fields which are anticommuting. By solving the coupled bosonic equations, the traveling wave solutions of the sIto system are obtained with the mapping and deformation method. Some novel types of exact solutions for the supersymmetric system are constructed with the solutions and symmetries of the usual Ito equation. In the meanwhile, the similarity reduction solutions of the model are also studied with the Lie point symmetry theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Some engineering properties of heavy concrete added silica fume

Many different types of building materials have been used in building construction for years. Heavy concretes can be used as a building material for critical building as it can contain a mixture of many heavy elements. The barite itself for radiation shielding can be used and also in concrete to produce the workable concrete with a maximum density and adequate structural strength. In this study, some engineering properties like compressive strength, elasticity modules and flexure strength of heavy concretes’ added Silica fume have been investigated.

42 ENGINEERING↗

Effective terahertz-to-near-infrared photon conversion in slant-stripe-type periodically poled LiNbO{sub 3}

We propose a slant-stripe-type periodically poled LiNbO{sub 3} crystal for the construction of a practical quasi-phase-matched (QPM) device for terahertz (THz) detection. A minimum detectable THz-wave energy of 25 fJ/pulse is demonstrated, and a linear input-output property with a dynamic range of 60 dB is achieved. The working frequency range of 0.15 THz for THz detection is obtained, and the central frequency of the sensitivity can be controlled by the design of the periodically poled structure. THz detection using this QPM device is a promising technique that may allow the detection of a coherent THz photon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗