Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Statistical Hauser-Feshbach model calculation for (α, n) reaction cross section and discrete level population

We calculate the α-particle induced reactions on 17,18 O, 19 F, and 23 Na, in the energy range 0 ≤ E α ≤ 10 MeV, with a particular attention to the branching ratios of populated discrete levels in the (α,n) channels. Since there are too many open channels to employ the R-matrix theory, we apply the statistical Hauser-Feshbach model to calculate these reaction cross sections and branching ratios. The branching ratio is defined as b n = $\frac{σ_n}{Σ_iσ_i + σ_c}$ , where σ n is the n-th level production cross section after the neutron emission, and σ c is the production of the continuum state. In the cases of our target nuclei and the energy range of interest, the residual nuclei of the neutron emission channel are always in their discrete states, so that σ c can be negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

APS Science 2020 (Vol. 2)

The U.S. Department of Energy's Advanced Photn Source (APS) is one of the world’s most productive x-ray light source facilities. Each year, the APS provides high-brightness x-ray beams to a diverse community of more than 5,000 researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. Researchers using the APS produce over 2,000 publications each year detailing impactful discoveries, and solve more vital biological protein structures than users of any other x-ray light source research facility. APS x-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation’s economic, technological, and physical well-being. The APS occupies an 80-acre site on the Argonne campus, about 25 miles from downtown Chicago, Illinois. It shares a site with the Center for Nanoscale Materials and the Advanced Protein Characterization Facility.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

The Steel Equivalency Workbook: An X-Ray Transmission Calculator

The Steel Equivalency Spreadsheet was created as a robust, user-friendly method for the following: 1. Determining if it is possible to image an object. 2. Reducing time needed when selecting equipment and preparing for field imaging activities. 3. Reducing the amount of equipment taken for field imaging activities. 4. Determining a starting point for exposure settings prior to imaging an object. 5. Reducing the amount of dose deposited to complete an imaging operation (in the spirit of As Low As Reasonably Achievable, ALARA). The spreadsheet was developed using various physical models to account for different phenomena. Future implementations aim to expand beyond the Digital Radiography and Computed Tomography Single Munition Scanner (DRCT SMS) in standard configuration to include high energy XRGs (Betatrons) and sub-MeV pulsed XRGs (XRS4). Alternative computational methods that compensate for incoherent scattering when calculating relative transmission are also being pursued. Ultimately the spreadsheet exceeded the developmental goal of having less than 10% average error when comparing calculations to real-world images.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Literary review and modeling outlook for radiation damage in fused-silica optical fibers

The purpose of this document is to distill, from literature, the effects of radiation damage in fused-silica optical fibers. This information will be used to design a theoretical framework capable of predictive modeling that will be published elsewhere. By inspection of the relevant literature, the devised method is calculation of defect amorphous structures by molecular dynamic techniques, and computation of the macroscopic dielectric function using density functional theory. The dielectric function is then used to directly compute the transmittance of the core material before and after irradiation via solution of Maxwell’s equations in a homogeneous medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Boson Fermion Nucleus Explanation for Fission Fragment Anisotropy: Monograph #13

Since 1952, anisotropy has been observed in the paths of fission fragments following the assimilation of an incident neutron or photon in the nucleus. Fission fragment flux favors certain angles relative to the path of the incident particle, constituting anisotropy. The amount of anisotropy is dependent on the energy of the incident particle. Fission fragment anisotropy can be explained by the disruption of nuclear structure combined with the requirement of a specific rotational orientation in theta and phi of that structure relative to the incident neutron or photon flux. A specific and limited area in the nucleus can assimilate the incident particle and induce upset within the structure, followed by scission and fission of the nucleus. The orientation and nature of the structure upset dictates fission fragment trajectory and is responsible for fission fragment anisotropy. This concept can be explained and supported by the theory of boson fermion nucleus (BFN) structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Unravelling the extreme universe [Slides]

A journey to the early universe includes stops that examine the Quark Gluon plasma of the early universe 10 -6 seconds after the Big Bang and its extraordinary properties, the emergence of hadrons (like the proton and neutron) and light nuclei 1 second after the Big Bang, and the elusive neutrinos, in addition to the primordial ones that are also produced during star formation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Fragmentation and Space-Time Reciprocity [Slides]

Through fragmentation processes and high energy collisions we access the internal structure of nuclear matter in terms of quarks and gluons, create new states of nuclear matter, and understand the transition from quarks and gluons to hadrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Nuclear Data for Spallation Neutron Radioisotope Production (Final Technical Report)

Over 50 million nuclear medicine procedures are performed annually, leading to a multi-billion dollar market for radioisotope production. The demand for new medical and research isotopes is growing, and radioisotope supply is insufficient. Most radioisotope production today utilizes charged particle or low-energy neutron irradiation of a target. Isotope production with tens to hundred MeV incident energies is a relatively unexplored option. There is a tremendous opportunity associated with a growing number of suitable domestic and international facilities buttressed by hundred million dollar global investments (e.g., the Los Alamos and Brookhaven Isotope Production Facilities, the European Spallation Source in Lund, and the Korean Multi-purpose Accelerator Complex in Gyeongbuk). In part due to a lack of supporting nuclear data that would make modeling radioisotope yields and purities possible, these facilities do not utilize their high-energy neutron fluxes for isotope production. This project attempted to measure neutron reaction excitation functions relevant to the large-scale production of critical radioisotopes, enabling development of cost-efficient isotope production methods, contributing to the improvement of theoretical models, and enhancing the value of national isotope production facilities. Reactions which form 67 Cu, 32 Si, and alpha-emitting isotopes like 225 Ac were chosen for their consistent prioritization by expert panels, representation of diverse reaction mechanisms, and relative lack of supporting nuclear data. Accurate measurement of these data is presently made only using quasi-monoenergetic neutron beams, which are produced by bombarding thin lithium targets with protons at only a few laboratories in the world. Ultimately, the projects efforts were incompletely accomplished due to a combination of multi-year technical issues at the only laboratory in the world which can make the proposed measurements, iThemba Labs in South Africa, and the onset of a global pandemic, which precluded the significant effort and time required to develop an independent measurement capability in the United States.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Interesting Isomers - From classic nuclear physics to dark matter - [Slides]

The physics of isomers is almost a century old. While a lot of isomers are studied, the most extreme cases remain unexplored. Testing classic nuclear physics in the extrema. A door into dark sector that is allows us to look for DM types that are not accessible in larger efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Two-dimensional quantum gas with real time control of complete Hamiltonian (Final Report)

We developed a novel quantum platform with the complete capability to control individual atoms and their mutual interactions in real time. Ultracold atoms are employed since they have the lowest temperature and decoherence. This system is the ultimate dream of quantum physicists where the Hamiltonian of every single atom, including its kinetic energy, potential energy, and interactions, can be independently programmed in real time. We also initiated a new theoretical collaboration to explore its full potential.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Ice Dusty Plasma (Final Report)

The NSF/DOE funding described in this final report was for constructing a substantial upgrade that would enable operation at variable and much lower cryogenic temperatures than was available in a previous experiment that operated from 2013 to 2019. Components for the upgraded experiment were designed and ordered from August to December 2019 and assembly began in early 2020. However, COVID-19 halted all lab work for much of 2020 and then when lab work resumed, numerous restrictions on lab access and in-lab time further impeded progress. Because of these delays, first plasma was obtained in late 2021 and a normal work pace resumed only in mid-2022. A no-cost extension was requested because the COVID-19 delays prevented work from being done at the anticipated rate. Constructing a water-ice experiment was a significant gamble because the parameter regime differs substantially from conventional laboratory plasmas and injecting water vapor into a plasma goes very much against convention as one normally goes to great lengths to avoid water vapor. This experiment opens a new frontier, namely the study of how charged ice grains form, grow, and interact with a plasma environment. The just-completed upgrade was a further gamble because it combines technology never previously used together (cryocoolers, plasma, and ice).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coherent control of strongly interacting spins in the solid-state

The major goal of this project is to develop coherent interacting spin systems in the solid state, based on rare earth ions. By leveraging the ability to controllably incorporate rare earth ions such as Er into a solid-state host, and maintain individual-ion addressability below the diffraction limit based on inhomogeneous broadening, we aim to create strongly interacting electron spin clusters with individual-site control. Performing spectroscopy of these strongly interacting systems will shed light on their fundamental properties, as well as enable applications to quantum information science, in particular quantum networks that are also enabled by a telecom-band spin-photon interface in Er.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Resolving femtosecond photoinduced energy flow: capture of nonadiabatic reaction pathway topography and wavepacket dynamics from photoexcitation through the conical intersection seam (Final Technical Report)

The dynamics that take place within just tens to hundreds of femtoseconds following the absorption of light by a molecule can play a critical role in how the absorbed energy is directed, allowing it to be used for a specific function or dissipated harmlessly. The form of chemical change that occurs rapidly in these molecules is called a “nonadiabatic electronic transition.” Such transitions are known to mediate energy flow in natural biological systems such as the ultraviolet photoprotection mechanism of DNA and the first step of the human vision response. Understanding how these mechanisms work precisely may help scientists achieve controlled manipulation of solar energy or optical control of a wide range of energy management functions in artificial systems. Experimental methods, however, have not yet allowed a precisely resolved and complete measurement of nonadiabatic electronic transitions. This constitutes a major obstacle to progress in the field. For progress to occur that would inform a wide body of research aiming to efficiently harness the energy of light for practical purposes, it is especially important to benchmark computational models of the molecules undergoing these rapid changes with experimental measurements, in order to learn which models are accurate. With Dept. of Energy funding, we have made strong progress towards establishing a new optical method for experimentally detecting the full nonadiabatic electronic transition. This requires having coordinated pulses of light covering the visible through the mid-infrared range of the electromagnetic spectrum that last only ten femtoseconds. We have developed a new, relatively simple approach for generating such pulses of laser light, and have incorporated them into a time-resolved spectrometer for measuring rapid changes in molecules. These tools can provide the greater precision and new types of data that are needed to benchmark computational models of molecular change and thus to make progress in the field. Our tools were tested on graphene, an excellent solid-state sample for verifying the capabilities and limitations of our instrumentation. The investment made in these tools by the Dept. of Energy Office of Science will allow new fundamental scientific understanding of energy dynamics in molecules in future studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗