Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Extended wavelength mid-infrared photoluminescence from type-I InAsN and InGaAsN dilute nitride quantum wells grown on InP

Extended wavelength photoluminescence emission within the technologically important 2–5 μm spectral range has been demonstrated from InAs{sub 1−x}N{sub x} and In{sub 1−y}Ga{sub y}As{sub 1−x}N{sub x} type I quantum wells grown onto InP. Samples containing N ∼ 1% and 2% exhibited 4 K photoluminescence emission at 2.0 and 2.7 μm, respectively. The emission wavelength was extended out to 2.9 μm (3.3 μm at 300 K) using a metamorphic buffer layer to accommodate the lattice mismatch. The quantum wells were grown by molecular beam epitaxy and found to be of a high structural perfection as evidenced in the high resolution x-ray diffraction measurements. The photoluminescence was more intense from the quantum wells grown on the metamorphic buffer layer and persisted up to room temperature. The mid-infrared emission spectra were analysed, and the observed transitions were found to be in good agreement with the calculated emission energies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Relationship between transport properties and band diagrams in InAs{sub x}Sb{sub 1−x}/Al{sub 0.1}In{sub 0.9}Sb quantum wells

The resistivity of InAs{sub 0.1}Sb{sub 0.9}/Al{sub 0.1}In{sub 0.9}Sb quantum wells (QWs) is much lower than that of InSb/Al{sub 0.1}In{sub 0.9}Sb QWs, staying low resistivity even at low temperature. Fundamental difference in low temperature transport properties between InSb/Al{sub 0.1}In{sub 0.9}Sb and InAs{sub 0.1}Sb{sub 0.9}/Al{sub 0.1}In{sub 0.9}Sb QWs was revealed, based on the band diagram calculations of these QWs. Band diagrams of InAs{sub x}Sb{sub 1−x}/Al{sub 0.1}In{sub 0.9}Sb QWs showed that the energy band of the InAs{sub x}Sb{sub 1−x} layer moves downward with increasing As content x. The QW is type I at x equal to 0, becomes type II at x equal to 0.1. The Fermi level (E{sub F}) of the InSb QWs lies in the band gap and below apart from the bottom of the conduction band, while E{sub F} of the InAs{sub 0.1}Sb{sub 0.9} QWs is above the bottom of the conduction band of the well. The calculated sheet carrier densities are in good agreement with the experimental results. It well explains that the sheet carrier density difference between InSb and InAs{sub 0.1}Sb{sub 0.9} QWs mainly originates from this band diagram difference and the position of E{sub F}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonlinear terahertz response of HgTe/CdTe quantum wells

Without breaking the topological order, HgTe/CdTe quantum wells can have two types of bulk band structure: direct gap type (type I) and indirect gap type (type II). We report that the strong nonlinear optical responses exist in both types of bulk states under a moderate electric field in the terahertz regime. Interestingly, for the type II band structure, the third order conductivity changes sign when chemical potentials lies below 10 meV due to the significant response of the hole excitation close to the bottom of conduction band. Negative nonlinear conductivities suggest that HgTe/CdTe quantum wells can find application in the gain medium of a laser for terahertz radiation. The thermal influences on nonlinear optical responses of HgTe/CdTe quantum wells are also studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strongly transverse-electric-polarized emission from deep ultraviolet AlGaN quantum well light emitting diodes

The optical polarization of emission from ultraviolet (UV) light emitting diodes (LEDs) based on (0001)-oriented Al{sub x}Ga{sub 1−x}N multiple quantum wells (MQWs) has been studied by simulations and electroluminescence measurements. With increasing aluminum mole fraction in the quantum well x, the in-plane intensity of transverse-electric (TE) polarized light decreases relative to that of the transverse-magnetic polarized light, attributed to a reordering of the valence bands in Al{sub x}Ga{sub 1−x}N. Using k ⋅ p theoretical model calculations, the AlGaN MQW active region design has been optimized, yielding increased TE polarization and thus higher extraction efficiency for bottom-emitting LEDs in the deep UV spectral range. Using (i) narrow quantum wells, (ii) barriers with high aluminum mole fractions, and (iii) compressive growth on patterned aluminum nitride sapphire templates, strongly TE-polarized emission was observed at wavelengths as short as 239 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the built-in electric field on polaron effects in a wurtzite ZnO/Mg{sub x}Zn{sub 1−x}O quantum well

The effects of the built-in electric field on the polarons in wurtzite ZnO/Mg{sub x}Zn{sub 1−x}O quantum wells are studied numerically via the improved Lee-Low-Pines intermediate coupling variational method. The contributions of the different branches of the optical phonons to the polaron energies of the ZnO/Mg{sub x}Zn{sub 1−x}O quantum wells are calculated as functions of well width d and composition x. The anisotropy effects of the electronic effective masses, the dielectric constants, and the frequencies of the different branches of the phonon modes (including both the longitudinal-like and transverse-like confined optical phonon modes, the interface optical phonon modes and the half-space phonon modes) on the polaron energies are considered in the calculations. Comparisons between the cases with and without the built-in electric field (F ≠ 0 and F = 0) are made for the optical phonon contributions to the polaron energies for the different branches of the phonon modes. The results show that the built-in electric field has marked effects on the contributions of the phonons with the different modes; in detail, it makes positive contributions to the interface and the half-space phonons, but negative contributions to the confined phonons, and thus its effect on the total phonon contribution is not obvious. Detailed comparisons of the contributions of the symmetric and antisymmetric phonon modes to the polaron energies as functions of d and x are also presented and a heuristic argument is provided to explain the numerical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation of the nanostructure with optoelectronic properties during rapid thermal annealing of Ga(NAsP) quantum wells grown on Si(001) substrates

Ga(NAsP) quantum wells grown pseudomorphically on Si substrate are promising candidates for optically active light sources in future optoelectronically integrated circuits on Si substrates. As the material is typically grown at low temperatures, it has to be thermally annealed after growth to remove defects and optimize optoelectronic properties. Here we show by quantitative transmission electron microscopy that two different kinds of structural development are associated with the annealing. First of all, the quantum well homogeneity improves with increasing annealing temperature. For annealing temperatures above 925 °C the composition becomes less homogeneous again. Second, voids form in the quantum well for annealing temperatures above 850 °C. Their density and size increase continuously with increasing annealing temperature. These results are correlated to the optical properties of the samples, where we find from temperature-dependent photoluminescence measurements two scales of disorder, which show the same temperature dependence as the structural properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mid-infrared intersubband absorption from p-Ge quantum wells grown on Si substrates

Mid-infrared intersubband absorption from p-Ge quantum wells with Si{sub 0.5}Ge{sub 0.5} barriers grown on a Si substrate is demonstrated from 6 to 9 μm wavelength at room temperature and can be tuned by adjusting the quantum well thickness. Fourier transform infra-red transmission and photoluminescence measurements demonstrate clear absorption peaks corresponding to intersubband transitions among confined hole states. The work indicates an approach that will allow quantum well intersubband photodetectors to be realized on Si substrates in the important atmospheric transmission window of 8–13 μm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of the photovoltaic performance of pseudomorphic InGaN/GaN multiple-quantum-well solar cells on the active region thickness

We investigate the photovoltaic performance of pseudomorphic In{sub 0.1}Ga{sub 0.9}N/GaN multiple-quantum well (MQW) solar cells as a function of the total active region thickness. An increase in the number of wells from 5 to 40 improves the short-circuit current and the open-circuit voltage, resulting in a 10-fold enhancement of the overall conversion efficiency. Further increasing the number of wells leads to carrier collection losses due to an incomplete depletion of the active region. Capacitance-voltage measurements point to a hole diffusion length of 48 nm in the MQW region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diamagnetic susceptibility of a hydrogenic donor in a group IV-VI quantum dot-quantum well heterostructure

Electronic properties of a hydrogenic donor impurity in a CdSe/Pb{sub 0.8}Cd{sub 0.2}Se/CdSe quantum dot quantum well system are investigated for various radii of core with shell materials. Confined energies are obtained taking into account the geometrical size of the system and thereby the donor binding energies are found. The diamagnetic susceptibility is estimated for a confined shallow donor in the well system. The results show that the diamagnetic susceptibility strongly depends on core and shell radii and it is more sensitive to variations of the geometrical size of the well material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intraband Raman laser gain in a boron nitride coupled quantum well

On-centre impurity related electronic and optical properties are studied in a Boron nitride coupled quantum well. Confined energies for the intraband transition are investigated by studying differential cross section of electron Raman scattering taking into consideration of spatial confinement in a B{sub 0.3}Ga{sub 0.7}N/BN coupled quantum well. Raman gain as a function of incident optical pump intensity is computed for constant well width. The enhancement of Raman gain is observed with the application of pump power. The results can be applied for the potential applications for fabricating some optical devices such as optical switches, infrared photo-detectors and electro-optical modulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal orientation dependent intersubband transition in semipolar AlGaN/GaN single quantum well for optoelectronic applications

The optical properties of intersubband transition in a semipolar AlGaN/GaN single quantum well (SQW) are theoretically studied, and the results are compared with polar c-plane and nonpolar m-plane structures. The intersubband transition frequency, dipole matrix elements, and absorption spectra are calculated for SQW on different semipolar planes. It is found that SQW on a certain group of semipolar planes (55° < θ < 90° tilted from c-plane) exhibits low transition frequency and long wavelength response with high absorption quantum efficiency, which is attributed to the weak polarization-related effects. Furthermore, these semipolar SQWs show tunable transition frequency and absorption wavelength with different quantum well thicknesses, and stable device performance can be achieved with changing barrier thickness and Al compositions. All the results indicate that the semipolar AlGaN/GaN quantum wells are promising candidate for the design and fabrication of high performance low frequency and long wavelength optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of nearly lattice-matched GaN/(Al,In)N quantum wells

We report a systematic study of the photoluminescence (PL) properties of a series of nearly lattice-matched (LM) GaN/(Al,In)N single quantum well (SQW) samples, with well thickness ranging from 1.5 to 5 nm, grown by metalorganic vapor phase epitaxy. Temperature dependent PL and time-resolved PL measurements reveal similar trends among the studied SQW samples, which also indicate strong localization effects. The observed PL energy behavior, akin to the S-shape, accompanied first by a narrowing and then a broadening of the PL line width with increasing temperature, closely resemble previous observations made on the more established (In,Ga)N/GaN QW system. The similar trends observed in the PL features of those two QW systems imply that the PL properties of LM GaN/(Al,In)N SQW samples are also governed by localized states. The effects of carrier transfer among these localization sites are clearly observed for the 3 nm thick QW, evidenced by an increasing PL intensity in the lower energy spectral window and a concomitant increase in the corresponding PL decay time. Time-resolved data corroborate the picture of strongly localized carriers and also indicate that above a well thickness dependent delocalization temperature carrier distribution across the localized sites reaches thermal equilibrium, as the PL decay times over different spectral regions converge to the same value. Based on the difference between the calculated QW ground state transition energy, obtained using the envelope wave function formalism, and the measured PL energy, a localization energy of at least a few hundreds of meV has been extracted for all of the studied SQW samples. This rather large value also implies that In-related localization effects are more pronounced in the GaN/(Al,In)N system with respect to those in the (In,Ga)N/GaN one for a similar In content.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast broad-band photon detector based on quantum well devices and charge-integrating electronics for non-invasive FEL monitoring

The recent evolution of free-electron lasers has not been matched by the development of adequate beam-monitoring instrumentation. However, for both experimental and diagnostics purposes, it is crucial to keep such photon beams under control, avoiding at the same time the absorption of the beam and the possible destruction of the detector. These requirements can be fulfilled by utilizing fast and non-invasive photon detectors operated in situ, upstream from the experimental station. From this perspective, sensors based on Quantum Well (QW) devices can be the key to detecting ultra-short light pulses. In fact, owing to their high electron mobility, InGaAs/InAlAs QW devices operated at room temperature exhibit sub-nanosecond response times. Their direct, low-energy band gap renders them capable of detecting photons ranging from visible to X-ray. Furthermore, the 2D electron gas forming inside the QW is responsible for a charge amplification mechanism, which increases the charge collection efficiency of these devices. In order to acquire the signals produced by these QW sensors, a novel readout electronics has been developed. It is based on a high-speed charge integrator, which allows short, low-intensity current pulses to be read within a 50-ns window. The integrated signal is acquired through an ADC and the entire process can be performed at a 10-MHz repetition rate. This work provides a detailed description of the development of the QW detectors and the acquisition electronics, as well as reporting the main experimental results, which show how these tools are well suited for the realization of fast, broad-band beam monitors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparative studies of efficiency droop in polar and non-polar InGaN quantum wells

We report on a comparative study of efficiency droop in polar and non-polar InGaN quantum well structures at T = 10 K. To ensure that the experiments were carried out with identical carrier densities for any particular excitation power density, we used laser pulses of duration ∼100 fs at a repetition rate of 400 kHz. For both types of structures, efficiency droop was observed to occur for carrier densities of above 7 × 10{sup 11 }cm{sup −2 }pulse{sup −1} per quantum well; also both structures exhibited similar spectral broadening in the droop regime. These results show that efficiency droop is intrinsic in InGaN quantum wells, whether polar or non-polar, and is a function, specifically, of carrier density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interwell carrier transport in InGaN/(In)GaN multiple quantum wells

Uniform carrier distribution between quantum wells (QWs) of multiple QW light emitting diodes (LEDs) and laser diodes is important for the efficiency of device operation. In lasers, the uniform distribution ensures that all the QWs contribute to lasing; in LEDs, it enables high power operation with minimal Auger losses and a maximal efficiency. The carrier distribution between the QWs takes place via interwell (IW) transport. In polar GaN-based structures, the transport might be hindered by the strong carrier confinement and the internal electric fields. In this work, we study the IW transport in InGaN/(In)GaN multiple QW structures typical for ultraviolet-emitting devices with different well and barrier parameters. Experiments have been performed by means of time-resolved photoluminescence. We find that the IW transport rate is limited by the hole thermionic emission, which for InGaN/GaN QWs produces long transport times, ~1 ns per well, and a nonuniform IW carrier distribution. However, adding 5% In to the barriers completely changes the situation with the transport time decreasing by a factor of four and the hole thermionic emission energy from 200 meV to 70 meV. Finally, this study shows that using InGaN barriers is a promising pathway toward efficient high power InGaN LEDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Green-emitting cubic GaN/In 0.16 Ga 0.84 N/GaN quantum well with 32% internal quantum efficiency at room temperature

Structural and optical properties of a green-emitting cubic (i.e., zinc blende) GaN/In 0.16 Ga 0.84 N/GaN single quantum well structure are reported. The active layer is grown on a phase-pure (i.e., 100%) cubic GaN enabled on a 1 × 1 cm 2 U-grooved silicon (100) through aspect ratio phase trapping. Energy dispersive x-ray spectroscopy combined with room temperature cathodoluminescence reveals 522 nm green light emission at room temperature with only 16.0% ± 1.6% of indium content, which is ~30% less than the amount of indium needed in a traditional green-emitting hexagonal (i.e., wurtzite) well. Temperature-dependent behavior of the green emission, such as activation energy, s-shaped peak energy shift, and linewidth, is reported. Cathodoluminescence at 8 and 300 K reveals an internal quantum efficiency of 32.0% ± 0.6%, which is higher than any reported value for cubic wells. Altogether, phase-pure cubic active layers on phase transition cubic GaN are shown to be promising for green and longer wavelength emitters.

42 ENGINEERING↗

Guiding effect of quantum wells in semiconductor lasers

The guiding effect of InGaAs quantum wells in GaAs- and InP-based semiconductor lasers has been studied theoretically and experimentally. The results demonstrate that such waveguides can be effectively used in laser structures with a large refractive index difference between the quantum well material and semiconductor matrix and a large number of quantum wells (e.g. in InP-based structures). (semiconductor lasers. physics and technology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinearity from quantum mechanics: Dynamically unstable Bose-Einstein condensate in a double-well trap

We study theoretically an atomic Bose-Einstein condensate in a double-well trap, both quantum-mechanically and classically, under conditions such that in the classical model an unstable equilibrium dissolves into large-scale oscillations of the atoms between the potential wells. Quantum mechanics alone does not exhibit such nonlinear dynamics, but measurements of the atom numbers in the potential wells may nevertheless cause the condensate to behave essentially classically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗