Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Effect of Dy-substitution on the structural, vibrational, and multiferroic properties of BiFeO{sub 3} nanoparticles

Dysprosium (Dy) modified BiFeO{sub 3} [Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05, 0.10, and 0.15)] nanoparticles have been synthesized by a low temperature co-precipitation method. Rietveld analysis of X-ray diffraction data reveals a transformation from rhombohedral structure to orthorhombic structure with increase in the Dy concentration. From the transmission electron microscopy analysis, it is observed that the particle sizes of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05, 0.10, and 0.15) nanoparticles range between 50–70, 40–50, and 30–50 nm, respectively. Raman spectra of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05) belonging to rhombohedral (R3c) structure show 4A{sub 1} and 7E fundamental Raman modes in the range of 100–650 cm{sup −1} and two-phonon scattering modes such as 2A{sub 4} (longitudinal optical), 2E8 (transverse optical (TO)), and 2E{sub 9} (TO) in the range of 950–1270 cm{sup −1}. Suppression, broadening, and shifting of Raman modes have been observed with further increase in Dy concentration. The fundamental Raman modes of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.15) are assigned under orthorhombic (pnma) rather than rhombohedral (R3c) as the Rietveld analysis of X-ray diffraction data predicts a structural transformation for this particular composition. A complete suppression of two phonon modes has been noticed for this composition. An anomaly in the temperature dependent dielectric studies has been observed in all the samples at the vicinity of Neel temperature indicating a magnetic ordering, and an increase in magnetization with increase of Dy concentration in BiFeO{sub 3} is noticed from the room temperature magnetic studies. P–E hysteresis loop studies show a decrease of remnant polarization (P{sub r}) with the increase in Dy concentration and disappearance of hysteresis loop occurs for Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.15) depicting a transformation from non-centrosymmetric (R3c) to centrosymmetric (Pnma) system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of experimentally measured pressure oscillations on the vibration of a solid rocket motor

Results are presented of firing a Nike rocket against a backstop for the purpose of obtaining pressure fluctuations in the rocket case and determining their relationship to structural vibrations of the case. Special care was required to obtain these pressure fluctuations because of the much higher static pressure generated in the rocket. Very small pressure fluctuations within the rocket case can cause significant vibration levels. A previously observed high frequency was shown to decrease with time before completely disappearing at about 1 second of burning time. The vibration of the case itself is probably related to the longitudinal structural modes at frequencies below 500 Hz and is dependent on local structural conditions at frequencies above this value.

Schoenster, J. A.↗

Nonlinear flap-lag-extensional vibrations of rotating, pretwisted, preconed beams including Coriolis effects

The effects of pretwist, precone, setting angle, Coriolis forces and second degree geometric nonlinearities on the natural frequencies, steady state deflections and mode shapes of rotating, torsionally rigid, cantilevered beams were studied. The governing coupled equations of flap lag extensional motion are derived including the effects of large precone and retaining geometric nonlinearities up to second degree. The Galerkin method, with nonrotating normal modes, is used for the solution of both steady state nonlinear equations and linear perturbation equations. Parametric indicating the individual and collective effects of pretwist, precone, Coriolis forces and second degree geometric nonlinearities on the steady state deflection, natural frequencies and mode shapes of rotating blades are presented. It is indicated that the second degree geometric nonlinear terms, which vanish for zero precone, can produce frequency changes of engineering significance. Further confirmation of the validity of including those generated by MSC NASTRAN. It is indicated that the linear and nonlinear Coriolis effects must be included in analyzing thick blades. The Coriolis effects are significant on the first flatwise and the first edgewise modes.

Subrahmanyam, K. B.↗

Solving large-scale dynamic systems using band Lanczos method in Rockwell NASTRAN on CRAY X-MP

The improved cost effectiveness using better models, more accurate and faster algorithms and large scale computing offers more representative dynamic analyses. The band Lanczos eigen-solution method was implemented in Rockwell's version of 1984 COSMIC-released NASTRAN finite element structural analysis computer program to effectively solve for structural vibration modes including those of large complex systems exceeding 10,000 degrees of freedom. The Lanczos vectors were re-orthogonalized locally using the Lanczos Method and globally using the modified Gram-Schmidt method for sweeping rigid-body modes and previously generated modes and Lanczos vectors. The truncated band matrix was solved for vibration frequencies and mode shapes using Givens rotations. Numerical examples are included to demonstrate the cost effectiveness and accuracy of the method as implemented in ROCKWELL NASTRAN. The CRAY version is based on RPK's COSMIC/NASTRAN. The band Lanczos method was more reliable and accurate and converged faster than the single vector Lanczos Method. The band Lanczos method was comparable to the subspace iteration method which was a block version of the inverse power method. However, the subspace matrix tended to be fully populated in the case of subspace iteration and not as sparse as a band matrix.

Gupta, V. K.↗

Experimental Investigation of the Vibration Characteristics of Four Designs of Turbine Blades and of the Effect Produced by Varying the Axial Spacing Between Nozzle Blades and Turbine Blades.

An investigation was made to determine the effects of varying the spacing between the nozzle blades and the turbine blades of a turbo-jet engine on turbine-blade vibration for four turbine-blade designs of different degrees of stiffness. In general, there was a tendency toward increase in occurrence of vibration with decrease in spacing. The effect was most evident in the case of the turbine blades that had greater stiffness.

Morgan, W C↗

Sensing of fluid viscoelasticity from piezoelectric actuation of cantilever flexural vibration

An experimental method is proposed to measure the rheological properties of fluids. The effects of fluids on the vibration actuated by piezoelectric patches were analyzed and used in measuring viscoelastic properties. Fluid-structure interactions induced changes in the beam vibration properties and frequency-dependent variations of the complex wavenumber of the beam structure were used in monitoring these changes. To account for the effects of fluid-structure interaction, fluids were modelled as a simple viscoelastic support at one end of the beam. The measured properties were the fluid’s dynamic shear modulus and loss tangent. Using the proposed method, the rheological properties of various non-Newtonian fluids were measured. The frequency range for which reliable viscoelasticity results could be obtained was 10–400 Hz. Viscosity standard fluids were tested to verify the accuracy of the proposed method, and the results agreed well with the manufacturer’s reported values. The simple proposed laboratory setup for measurements was flexible so that the frequency ranges of data acquisition were adjustable by changing the beam’s mechanical properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA flight electronics environmental stress screening survey

Data compiled by the Institute of Environmental Sciences were used to establish guidelines for identifying defective, abnormal, or marginal parts as well as manufacturing defects. These data are augmented with other available sources of similar information in conjunction with NASA centers' data and presented in a form that may be useful to all NASA centers in planning and developing effective environmental stress screens. Information relative to thermal and vibration screens as the most effective methods for surfacing latent failures in electronic equipment at the component level is considered.

Marian, E. J.↗

Factors Affecting VUV Emission Spectrum near Lyman-{alpha} from a Hydrogen Plasma Source

Vacuum ultra violet (VUV) emission spectra from plasmas near walls of different metallic materials were measured to estimate the effect upon the local production rate of vibrational excited hydrogen molecules due to plasma wall interaction. Among Cu, Mo, Ni, Ta and Ti, the intensity of band spectrum around Lyman-{alpha} had become the largest when Cu wall was used while it was the smallest for Ti. The role of particle reflection from the plasma electrode surface upon the H{sup -} production by a pure electron volume process is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical lattices with micromechanical mirrors

We investigate a setup where a cloud of atoms is trapped in an optical lattice potential of a standing-wave laser field which is created by retroreflection on a micromembrane. The membrane vibrations itself realize a quantum mechanical degree of freedom. We show that the center-of-mass mode of atoms can be coupled to the vibrational mode of the membrane in free space. Via laser cooling of atoms a significant sympathetic cooling effect on the membrane vibrations can be achieved. Switching off laser cooling brings the system close to a regime of strong coherent coupling. This setup provides a controllable segregation between the cooling and coherent dynamics regimes, and allows one to keep the membrane in a cryogenic environment and atoms at a distance in a vacuum chamber.

74 ATOMIC AND MOLECULAR PHYSICS↗

Theoretical Treatment of the Coriolis Effect Using Hyperspherical Coordinates, with Application to the Ro-Vibrational Spectrum of Ozone

Here, several alternative methods for the description of the interaction between rotation and vibration are compared and contrasted using hyperspherical coordinates for a triatomic molecule. These methods differ by the choice of the z -axis and by the assumption of a prolate or oblate rotor shape of the molecule. For each case, a block-structure of the rotational–vibrational Hamiltonian matrix is derived and analyzed, and the advantages and disadvantages of each method are made explicit. This theory is then employed to compute ro-vibrational spectra of singly substituted ozone; roughly, 600 vibrational states of 16 O 18 O 16 O and 16 O 16 O 18 O isomers combined, with rotational excitations up to J = 5 and both inversion parities (21600 coupled ro-vibrational states in total). Splittings between the states of different parities, so-called K -doublings, are calculated and analyzed. The roles of the asymmetric-top rotor term and the Coriolis coupling term are determined individually, and it is found that they both affect these splittings, but in the opposite directions. Thus, the two effects partially cancel out, and the residual splittings are relatively small. Energies of the ro-vibrational states reported in this work for 16 O 18 O 16 O and 16 O 16 O 18 O are in excellent agreement with literature (available for low-vibrational excitation). New data obtained here for the highly excited vibrational states enable the first systematic study of the Coriolis effect in symmetric and asymmetric isotopomers of ozone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling, Modal Properties, and Mesh Stiffness Variation Instabilities of Planetary Gears

Planetary gear noise and vibration are primary concerns in their applications in helicopters, automobiles, aircraft engines, heavy machinery and marine vehicles. Dynamic analysis is essential to the noise and vibration reduction. This work analytically investigates some critical issues and advances the understanding of planetary gear dynamics. A lumped-parameter model is built for the dynamic analysis of general planetary gears. The unique properties of the natural frequency spectra and vibration modes are rigorously characterized. These special structures apply for general planetary gears with cyclic symmetry and, in practically important case, systems with diametrically opposed planets. The special vibration properties are useful for subsequent research. Taking advantage of the derived modal properties, the natural frequency and vibration mode sensitivities to design parameters are investigated. The key parameters include mesh stiffnesses, support/bearing stiffnesses, component masses, moments of inertia, and operating speed. The eigen-sensitivities are expressed in simple, closed-form formulae associated with modal strain and kinetic energies. As disorders (e.g., mesh stiffness variation. manufacturing and assembling errors) disturb the cyclic symmetry of planetary gears, their effects on the free vibration properties are quantitatively examined. Well-defined veering rules are derived to identify dramatic changes of natural frequencies and vibration modes under parameter variations. The knowledge of free vibration properties, eigen-sensitivities, and veering rules provide important information to effectively tune the natural frequencies and optimize structural design to minimize noise and vibration. Parametric instabilities excited by mesh stiffness variations are analytically studied for multi-mesh gear systems. The discrepancies of previous studies on parametric instability of two-stage gear chains are clarified using perturbation and numerical methods. The operating conditions causing parametric instabilities are expressed in closed-form suitable for design guidance. Using the well-defined modal properties of planetary gears, the effects of mesh parameters on parametric instability are analytically identified. Simple formulae are obtained to suppress particular instabilities by adjusting contact ratios and mesh phasing.

Parker, Robert G.↗