Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “U”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Post-puff SOL broadening on MAST-U under high-recycling conditions: evidence consistent with cross-field transport changes

Transient broadening of the scrape-off layer (SOL) density profile can modify main-chamber first-wall particle fluxes and divertor loading, yet its control parameters remain debated between divertor-regime transitions, neutral dynamics and changes in cross-field transport. We investigate fueling-driven SOL density-profile evolution and post-fueling relaxation on MAST-Upgrade (MAST-U) in ohmic L-mode, using two otherwise similar double-null Conventional Divertor discharges (I p = 450 kA, B T = 0.33 T) with identical 50 ms low-field side gas puffs; the only intentional difference is the puff start time. Upstream Thomson scattering shows that both discharges develop a transient far-SOL density profile modification, expressed as an increased SOL-width metric λ n e and a far-SOL enhancement consistent with a shoulder-like signature. In the earlier-puff case, the SOL-width metric remains elevated after puff termination and the post-puff decay time scales are systematically longer across the analysed radii. Outer-target Langmuir probes indicate high-recycling conditions during the analysed window (few-eV T e with radially peaked j sat,∥ and q ∥ profiles, without signatures of deep detachment). The outer-divertor collisionality proxy Λ div is elevated in both cases and does not discriminate between the different post-puff persistence. The target-integrated ion flux proxy ∫ J sat dA evolves nearly identically in both discharges when aligned to the puff start. Taken together, these observations suggest that the late/post-puff upstream SOL evolution is not set by parallel exhaust to the outer targetalone and is more consistent with upstream cross-field redistribution, with a possible role for plasma–neutral coupling and fueling geometry.

MAST-U↗
DOE OSTI2025

Effects of midplane density gradient in the propagation of high-harmonic fast waves considering high temperature anisotropy in the scrape-off layer of NSTX-U

High-Harmonic Fast Wave (HHFW) heating experiments in NSTX have shown that up to 60% of the injected power can be lost in the Scrape-Off Layer (SOL) when the density is above the fast wave cutoff density in front of the antenna, for which the fast wave is able to propagate into the plasma. This work models HHFW propagation in the SOL plasmas of NSTX-U using a 2D divertor SOL profile derived from the pressure assumption and the finite element temperature solution, which accounts for the high anisotropy of heat conduction in a 2D axisymmetric geometry. In this work, the two-dimensional axisymmetric SOL temperature profile is first evaluated by solving the steady-state non-linear heat conduction equation, in which thermal conductivity depends on temperature, using a finite element approach in the Petra-M workbench. A 2D density profile is then obtained from a prescribed density profile at the outer midplane assuming pressure is uniform along a flux tube in the SOL. This approach results in density and temperature profiles in which the strong asymmetric nature of heat conduction between the parallel and perpendicular background magnetic field is successfully captured. Furthermore, this work focuses on investigating the effect of the SOL plasma density profile on parasitic HHFW propagation in the SOL. The simulation results show that the radial gradient of the density profile affects the wavefield propagation in the SOL. As the density profile broadens, the wavefield intensity and its poloidal extent are reduced in the SOL, and the core coupling increases. Similarly, as shown by collisional power deposition, a proxy for power absorption, the fraction of power deposited in the SOL decreases with a broadening profile.

HHFW↗
DOE OSTI2022

3D full wave fast wave modeling with realistic HHFW antenna geometry and SOL plasma in NSTX-U

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by developing for the full torus 3D scrape-off layer (SOL) plasma simulation together with the antenna and core plasma in the NSTX-U device in HHFW frequency regime for a cold plasma model. The present paper extends the previous modeling (Bertelli et al 2020 AIP Conf. Proc. 2254 030001) to a full 3D device geometry including realistic antenna geometry in order to capture a more realistic experimental situation including the fully 3D wave field effects and the antenna plasma interaction in the SOL plasma, and, at the same time, resulting core wave propagation. Here, the central tool of the present work is the Petra-M code, which is a newly developed state-of-the-art generic electromagnetic simulation tool for modeling RF wave propagation based on MFEM (http://mfem.org), an open source scalable C++ finite element method library.

3D RF modeling↗
DOE OSTI2024

Super-X and conventional divertor configurations in MAST-U ohmic L-mode; a comparison facilitated by interpretative modelling

Measurements are presented, alongside corresponding interpretative SOLPS-ITER simulations, of the first MAST-U experiments comparing ohmically heated L-mode fuelling scans in Conventional divertor (CD) and Super-X divertor (SXD) configurations. In experiment, at comparable outer mid-plane separatrix electron density, $n_{e,\textrm{sep,OMP}}$, the maximum lower outer target heat load was found to be a factor 16 $\,\pm\,7$ lower in SXD compared to CD. In simulation, a factor 26.8 reduction was found (slightly higher than the experimental range), suggesting an additional reduction in SXD compared to the factor 9.3 expected from geometric considerations alone. According to the simulations, this additional reduction in the SXD is due to a net radial transport of the energy remaining downstream of the $T_e = 5$ eV location. This energy is carried out of the critical (highest heat load) flux tube by deuterium atoms, demonstrating the importance of a longer legged divertor which provides space for this to occur. Importantly, in both simulation and experiment, the SXD has minimal impact on the upstream n e and T e profiles. Spectral inferences of detachment front movement in SXD compare well between simulation and experiment. In regions of high magnetic field gradient, the parallel movement of the front towards the X-point becomes less sensitive to increasing $n_{e,\textrm{sep,OMP}}$, in qualitative agreement with simplified models and previous predictive simulations. Additional aspects, regarding the target ion flux rollover, upstream separatrix temperature and drift effects, are also presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Impact of dynamic Jahn-Teller effect on magnetic excitations, lattice vibration, and thermal conductivity in U 𝑥 ⁢T⁢h 1−𝑥 ⁡O 2 system

Vibrational and magnetic properties of single-crystal uranium-thorium dioxide (U 𝑥 ⁢T⁢h 1−𝑥⁡ O 2 ) with a full range of 0 < 𝑥 < 1 are investigated. Thorium dioxide is a diamagnet whose thermal properties are governed by lattice vibration. The addition of paramagnetic uranium ions leads to the emergence of magnetic effects that alter the thermophysical properties noticeably even at room temperature. The interaction of phonons with magnetic moments of uranium 5⁢𝑓 electrons mediated by magnetoelastic coupling results in an anomalous low-temperature thermal conductivity profile. Analysis of the magnetic susceptibility measurements indicates a departure from the Curie-Weiss relationship characteristic of noninteracting paramagnetic ions, previously associated with the dynamic Jahn-Teller (DJT) effect characterized by coupling between spin and the oxygen sublattice. The T 2⁢g Raman peak position follows a nonlinear trend as a function of uranium concentration and hints that these Raman active optical modes play a role in either DJT or in mediating quadrupole-quadrupole interactions. A first-principle-based thermal transport model is implemented to explain the low-temperature transport measurements, where the anomalous reduction is attributed to phonon-spin resonant scattering. The interplay between spins and phonons is also captured using high-resolution inelastic x-ray scattering (IXS) measurements of phonon linewidths. Our results provide insights into the phonon interactions with the magnetic excitations governing DJT effect and impacting the low-temperature thermal transport processes in this material system. Furthermore, these findings have implications for understanding low-temperature thermal transport and magnetic properties in advanced materials for information processing and energy applications.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Slow thermalization and subdiffusion in $U$(1) conserving Floquet random circuits

Random quantum circuits are paradigmatic models of minimally structured and analytically tractable chaotic dynamics. We study a family of Floquet unitary circuits with Haar random U(1) charge conserving dynamics; the minimal such model has nearest-neighbor gates acting on spin-1/2 qubits, and a single layer of even/odd gates repeated periodically in time. We find that this minimal model is not robustly thermalizing at numerically accessible system sizes, and displays slow subdiffusive dynamics for long times. We map out the thermalization dynamics in a broader parameter space of charge conserving circuits, and understand the origin of the slow dynamics in terms of proximate localized and integrable regimes in parameter space. In contrast, we find that small extensions to the minimal model are sufficient to achieve robust thermalization; these include (i) increasing the interaction range to three-site gates, (ii) increasing the local Hilbert space dimension by appending an additional unconstrained qubit to the conserved charge on each site, or (iii) using a larger Floquet period comprised of two independent layers of gates. Furthermore, our results should inform future studies of charge conserving circuits, which are relevant for a wide range of topical theoretical questions.

1-dimensional spin chains↗
DOE OSTI2024

Datasets and U-Net Model for "A Deep Learning Based Framework to Identify Undocumented Orphaned Oil and Gas Wells from Historical Maps: a Case Study for California and Oklahoma"

This dataset has results and the model associated with the publication Ciulla et al., (2024). It contains a U-Net semantic segmentation model (unet_model.h5) and associated code implemented in tensorflow 2.0 for the model training and identification of oil and gas well symbols in USGS historical topographic maps (HTMC). Given a quadrangle map (7.5 minutes), downloadable at this url: https://ngmdb.usgs.gov/topoview/, and a list of coordinates of the documented wells present in the area, the model returns the coordinates of oil and gas symbols in the HTMC maps. For reproducibility of our workflow, we provide a sample map in California and the documented well locations for the entire State of California (CalGEM_AllWells_20231128.csv) downloaded from https://www.conservation.ca.gov/calgem/maps/Pages/GISMapping2.aspx. Additionally, the locations of 1,301 potential undocumented orphaned wells identified using our deep learning framework or the counties of Los Angeles and Kern in California, and Osage and Oklahoma in Oklahoma are provided in the file found_potential_UOWs.zip. The results of the visual inspection of satellite imagery in Osage County is in the file visible_potential_UOWs.zip. The dataset also includes a custom tool to validate the detected symbols in the HTMC maps (vetting_tool.py). More details about the methodology can be found in the associated paper: Ciulla, F., Santos, A., Jordan, P., Kneafsey, T., Biraud, S.C., and Varadharajan, C. (2024) A Deep Learning Based Framework to Identify Undocumented Orphaned Oil and Gas Wells from Historical Maps: a Case Study for California and Oklahoma. Accepted for publication in Environmental Science and Technology. The geographical coordinates provided correspond to the locations of potential undocumented orphaned oil and gas wells (UOWs) extracted from historical maps. The actual presence of wells need to be confirmed with on-the-ground investigations. For your safety, do not attempt to visit or investigate these sites without appropriate safety training, proper equipment, and authorization from local authorities. Approaching these well sites without proper personal protective equipment (PPE) may pose significant health and safety risks. Oil and gas wells can emit hazardous gasses including methane, which is flammable, odorless and colorless, as well as hydrogen sulfide, which can be fatal even at low concentrations. Additionally, there may be unstable ground near the wellhead that may collapse around the wellbore. This dataset was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor the Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or the Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof or the Regents of the University of California.

Artificial Intelligence↗
DOE OSTI2020

Examination of Legacy Metallic Fuel Pins (U-10Zr) Tested in FFTF

The MFF series of metallic fuel (U-10wt%Zr) tests performed in the Fast Fuel Test Facility (FFTF) were the beginning tests to qualify the fuel as a driver fuel for FFTF. They all performed very well, to relatively high burnup and with no pin breaches. Tests MFF-3 and MFF-5 were chosen to be destructively examined because they were run at high peak cladding temperatures, 643 and 649°C respectively, and to modest to high burnup (138 and 101 MWd/kgM respectively). They were the only sodium fast reactor (SFR) metallic tests, with long (91.4 cm) fuel columns and clad in HT9, to be operated at these high temperatures. Extensive operating condition reconstruction was performed to accompany the examination, providing detailed operating conditions axially along the pins. In addition, detailed ORIGEN calculations provided fuel burnup along the pin length. These calculations and detailed cross-section metallography allowed a PhD dissertation to be performed where the fuel/cladding chemical interaction (FCCI) was modeled using Fickian and Soret Effect driven diffusion of rare earth fission products to the cladding surface and interact with the cladding. The examination of the MFF-3 and MFF-5 pins included neutron radiography, axial profilometry including pin bow and length measurements, precision gamma scanning, plenum gas puncturing to measure fission gas release, detailed chemical/isotopic analyses of fuel samples to confirm burnup calculations, and metallography of pin cross-sections, including micro-hardness measurements of fuel and cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1986

Laser-produced spectra and QED effects for Fe-, Co-, Cu-, and Zn-like ions of Au, Pb, Bi, Th, and U

Spectra of very highly charged ions of Au, Pb, Bi, Th, and U have been observed in laser-produced plasmas generated by the OMEGA laser. Line identifications in the region 9-110 A were made for ions in the Fe, Co, Cu, and Zn isoelectronic sequences. Comparison of the measured wavelengths of the Cu-like ions with values calculated with and without QED corrections shows that the inclusion of QED corrections greatly improves the accuracy of the calculated 4s-4p wavelengths. However, significant differences between the observed and calculated values remain.

Seely, J. F.↗
NASA NTRS1999

Spectral Gradients and u-v Sampling

I describe a systematic method for characterizing the effects of differences in u-v coverage in terms of inferred spectral gradients in interferometric images. This method is directly applicable to optical and radio interferometry; it is useful in situations when observations using scale arrays are not feasible.

u-v sampling spectral gradients interferometric im↗
NASA NTRS2016

Cryogenic Low Noise MMIC Amplifiers for U-Band (40-60 GHz)

In this work, we describe monolithic millimeter-wave integrated circuit (MMIC) Low Noise Amplifier (LNA) and mixer designs for U-Band, also known as the WR19 waveguide band (40-60 GHz). The LNAs were fabricated in NGC’s 35 nm InP HEMT MMIC process. The MMICs were packaged in WR19 waveguide housings and tested for noise, both at room temperature and cryogenically. We present the results, including a comparison to the state-of-the-art, and discuss applications for amplifiers in this frequency range. To date, these are the first cryogenic 35 nm InP MMIC results covering the 40-60 GHz range. We achieved a noise temperature less than 30 K over the 40-60 GHz range, when the amplifiers were cryogenically cooled. These results are comparable with other results in the literature, and we believe are the lowest reported for MMICs in the 50-60 GHz range.

MMIC↗
DOE OSTI2021

Assessment of Cladding-Cladding Delamination Failures in U-Mo Fuel Plates

Monolithic fuel is a candidate fuel form for the conversion of high-performance research reactors. This plate-type fuel consists of a high-density, U-Mo alloy-based fuel in a monolithic form that is sandwiched between zirconium diffusion barriers and encapsulated in an aluminum cladding. To qualify this fuel system, the program must demonstrate that the fuel meets the safety standards, has a predictable behavior, and performs well in a reactor. Although many plates have shown satisfactory thermo-mechanical performance in reactor, a small number of experimental plates exhibited failures, rendering performance of these plates unacceptable. Post-irradiation examinations of failed plates have revealed that various failures modes are present, including pillowing, blistering, buckling, warping, delamination, fracture, rupture, oxide spallation, etc. Previous studies have implied that such various operational and loading conditions could generate a complex stress-strain state, facilitating distinct failure modes that could impact the structural integrity. To understand such various failure modes, a comprehensive set of studies focusing on failure modes is being performed. As a part of these studies, this work studies the cladding-cladding separation failures that were observed in some of previous irradiation tests. To understand the root cause of cladding separation failures, selected plates from previous irradiation experiments were simulated under comparable operational conditions. Stress-strain state of the plates at the interface were examined. The results were comparatively evaluated to understand possible effects of stress state of the bond-line on delamination failures. This paper presents these findings, discusses such failure modes, and examines the influence of various factors on previously observed cladding delamination failures.

42 ENGINEERING↗
DOE OSTI2023

Effective Lanthanide Diffusivity through U-Zr Metallic Fuel

Fuel-cladding chemical interaction (FCCI) is one of the main concerns for the performance of U-Zr metallic fuels. Although FCCI results in complex phase transformations and morphological changes in both the fuel and cladding sides of the interface, the formation of a brittle layer in the cladding side of the interface (sometimes referred to as wastage) has one of the most significant impacts on the cladding mechanical integrity. This brittle layer is associated with the formation of intermetallic compounds between the cladding constituents Fe, Cr and the lanthanide fission product species. The formation of this cladding wastage layer has been the focus of recent efforts to develop a mechanistic modeling framework, including production of lanthanides in the fuel, transport through the fuel to the fuel-cladding interface, and phase transformation to form intermetallic phases. To calculate the rate of transport of lanthanides through the fuel, a multi-scale computational approach has been used. Atomistic calculations have been performed to determine the diffusivities of Nd, the most prevalent lanthanide species, through the solid fuel matrix and along pore surfaces. These diffusivities have been used as input parameters for a mesoscale model to determine an effective diffusion coefficient that accounts for the formation of porosity, its interconnection, and infiltration with bond sodium from the fuel-cladding gap. The effective diffusivity has been used in engineering-scale simulations using the BISON fuel performance code, and BISON simulations have been compared to representative validation cases from the EBR-II reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Quantitative Insight to Fission Gas Pores Distribution in Irradiated Annular U-10Zr Metallic Fuel Using Machine Learning

Metallic fuels, particularly U-10Zr and its performance in reactor irradiation conditions, have been thoroughly investigated and are a promising candidate for next-generation sodium-cooled fast spectrum nuclear reactors. Irradiation in reactors can lead to the formation of fission gas and increased pore formation which can significantly impact fuel performance. Due to the large number of pores and various phases formed in metallic fuel during irradiation, a quantitative description of fission gas pores as a function of irradiation conditions is not yet available, undermining the fidelity of fuel performance modeling to support fuel qualification. It has been difficult to clearly detect pore boundaries and distinguish matrix phases from fission gas pores using optical microscopy by using simple threshold methods working with low magnification images. The pre-trained deep learning model for fission gas pore detection was applied to ~10,260 high magnification scanning electron microscopy images. The model increased the accuracy of fission gas pore segmentation to obtain statistical features, which cannot be processed manually. A pre-trained decision tree model was used to classify pores as isolated or connected pores, providing new insight into the correlation between the movement of lanthanides, solid fission products, and the radial temperature gradient developed in fuel irradiation conditions. This paper emphasizes the potential that artificial intelligence-based machine learning models have to accelerate qualification and support nuclear fuel development.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mapping the Microstructure During the Historic U-Mo Monolithic Fuel Foil Fabrication Process

Since 2004, there has been extensive effort towards the development of a uranium molybdenum monolithic fuel system to convert high performance research and test reactors. The RERTR-6 experiment was the first to attempt a monolithic fuel instead of a dispersed fuel form. The fabrication methods evolved overtime and provided the basis for current fabrication methods. The various steps in the process inevitably tailor the fuel alloy microstructure which is known to influence irradiation behavior. This document aims to present and discuss the fabrication evolution that transpired through a recounting of historical data from the various fabrication campaigns. By overlaying this data with basic science studies on the U-Mo that explored transformation kinetics, it is possible to estimate a measure of the impact heat treatments have on the final as-fabricated microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Assessment of effective elastic constants of U-10Mo fuel microstructures

Monolithic U-10Mo fuel undergoes significant microstructural changes during fuel burnup which degrades its mechanical properties. In this talk, we present results form a numerical method to assess the impact of the various microstructural features--grains, intragranular and intergranular Xe gas bubbles--on the elastic stiffness tensor. Using the Multiphysics Object-Oriented Simulation Environment (MOOSE), phase-field-based microstructures are combined with asymptotic expansion homogenization method to obtain effective elastic constants as a function of porosity and fission density. The results are verified and compared against analytical homogenization models. With this approach, elastic degradation in operating nuclear fuels can be quantified when the distributions of microstructural features are known from experimental characterization or rate-theory based models. We further develop an evolution model based on the virial equation of state for Xe gas and investigate the effect of growth and coalescence of the bubbles at the grain boundary faces and triple junctions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Multihead Attention U‐Net for Magnetic Particle Imaging–Computed Tomography Image Segmentation

Magnetic particle imaging (MPI) is an emerging noninvasive molecular imaging modality with high sensitivity and specificity, exceptional linear quantitative ability, and potential for successful applications in clinical settings. Computed tomography (CT) is typically combined with the MPI image to obtain more anatomical information. Herein, a deep learning‐based approach for MPI‐CT image segmentation is presented. The dataset utilized in training the proposed deep learning model is obtained from a transgenic mouse model of breast cancer following administration of indocyanine green (ICG)‐conjugated superparamagnetic iron oxide nanoworms (NWs‐ICG) as the tracer. The NWs‐ICG particles progressively accumulate in tumors due to the enhanced permeability and retention (EPR) effect. The proposed deep learning model exploits the advantages of the multihead attention mechanism and the U‐Net model to perform segmentation on the MPI‐CT images, showing superb results. In addition, the model is characterized with a different number of attention heads to explore the optimal number for our custom MPI‐CT dataset.

Juhong, Aniwat↗