Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The neutral atmosphere temperature experiment

The AEROS Neutral Atmosphere Temperature Experiment (NATE) is designed to measure the kinetic temperature of molecular nitrogen in the thermosphere. A quadrupole mass spectrometer tuned to N2 measures the N2 density variation in a small spherical antechamber having a knife-edged orifice which is exposed to the atmosphere at the outer surface of the spacecraft. The changing density of N2 due to the spinning motion of the spacecraft permits determination of the velocity distribution of the N2 from which the temperature is calculated. An alternate mode of operation of the instrument allows measurement of the other gases in the atmosphere as well as N2 permitting determination of the neutral particle composition of the atmosphere.

Spencer, N. W.↗
NASA NTRS1975

Evoked potential correlates of selective attention with multi-channel auditory inputs

Ten subjects were presented with random, rapid sequences of four auditory tones which were separated in pitch and apparent spatial position. The N1 component of the auditory vertex evoked potential (EP) measured relative to a baseline was observed to increase with attention. It was concluded that the N1 enhancement reflects a finely tuned selective attention to one stimulus channel among several concurrent, competing channels. This EP enhancement probably increases with increased information load on the subject.

Schwent, V. L.↗
NASA NTRS1975

Harmonic generation at high field strengths - Frequency shifts and saturation phenomena

Optical harmonic generation and mixing in the gas phase has been proposed as a technique for the generation of coherent radiation in the vacuum ultraviolet and soft X-ray spectral region. At the high field strengths required by these processes the interaction between atoms and the electromagnetic field shows intensity-dependent resonances. In this paper we modify harmonic generation theory to include the effect of these frequency shifts. Closed-form expressions for generated dipole moment, absorption probability, and coherence length are presented. The most important consequences of frequency shifts on resonantly enhanced processes are that the pump laser must be tuned away from the small-field resonance frequency, that the conversion efficiency may saturate, and that the dispersion of the medium may change sign. As an example, the generation of 198-A radiation by a five-photon mixing process in Li(+) is considered.

Stappaerts, E. A.↗
NASA NTRS1975

Stimulated Stokes emission with a dye laser - Intense tuneable radiation in the infrared

Tunable stimulated Stokes emission is generated at approximately 2.9 microns in barium vapor with an oscillator-amplifier dye laser. The conversion efficiency is as high as 40% and the energy output as high as 30 mJ. The emission is tuneable over about 100 wavenumbers. At high vapor pressures the tuning profile is markedly asymmetric.

Carlsten, J. L.↗
NASA NTRS1975

Conclusions from the discussions on observational results of heterodyne spectroscopy in astronomy

Experimental results in astronomy obtained with the aid of infrared heterodyne detection techniques are considered, taking into account the detection of thermal emission with no dispersion at the intermediate frequency and observations involving molecular line detection. The tuning range of a heterodyne spectrometer and of a Fourier transform spectrometer is considered and attention is given to the selection of the appropriate technique for a specific investigative problem.-

Mumma, M.↗
NASA NTRS1975

Excitation of a Helmholtz resonator by a turbulent boundary layer

A turbulent boundary layer on the fuselage of a glider was used to excite a Helmholtz resonator. The resonator orifice was flush with the surface and smaller than the boundary layer thickness. Resonator frequencies were chosen so they would tune with different portions of the boundary layer wall pressure spectrum. The resonators were excited at both the Helmholtz frequency and a standing wave frequency. The results show a shift in the Helmholtz frequency when the boundary layer is present. This shift indicates the degree to which the turbulence interacts with the acoustic motion in the orifice and modifies the end correction. Four of the nine resonators tested were 'strongly' excited and radiated considerable acoustic sound. This phenomenon occurs when turbulent eddies about the size of the orifice are convected past the orifice with the proper velocity to impose a frequency that matches a resonant frequency of the resonator. Turbulent eddies which are either smaller or larger than the orifice will not produce strong excitation.

Panton, R. L.↗
NASA NTRS1975

Possible new Jovian thermospheric models

Possibilities of models for the Jovian thermosphere, based upon mechanical heating, have been explored. Under certain reasonable assumptions about the magnitude of the critical Richardson number, the correction to the conventional expression for the eddy heat flux, and the height dependence of the eddy diffusion coefficient, a very hot thermosphere could result, yielding exospheric temperatures more in tune with the bounds being suggested by the recent optical and radio occultation experiments.

Prasad, S. S.↗
NASA NTRS1977

Band-elimination filter

Helical resonator is employed to produce stable, highly selective filter. Other features of filter include controlled bandwidth by cascading identical stages and stagger tuning, adjustable notch depth, good isolation between stages, gain set by proper choice of resistors, and elimination of spurious responses.

Shelton, G. B.↗
NASA NTRS1977

UHF/microwave oscillator/amplifier

Circuit uses tunnel diode as negative resistance and bipolar transistor as an active device in conjunction with resistors and capacitors. Transistor provides inductance required to produce oscillation and tuning. Output is taken from transistor collector and avoids unwanted characteristics of two-terminal oscillator/amplifier.

Kleinberg, L. L.↗
NASA NTRS1977

Fabrication of ultra-low-noise amplifier

Three construction techniques reduce noise temperature of microwave parametric amplifier. Techniques include electroformed idler cavity, screw-tuned idler, and low-loss matching section.

Kraemer, E.↗
NASA NTRS1975

The mini-O, a digital superhet, or a truly low-cost Omega navigation receiver

A quartz tuning fork filter circuit and some unique CMOS clock logic methods provide a very simple OMEGA-VLF receiver with true hyperbolic station pair phase difference outputs. An experimental system was implemented on a single battery-operated circuit board requiring only an external antenna preamplifier, and LOP output recorder. A bench evaluation and preliminary navigation tests indicate the technique is viable and can provide very low-cost OMEGA measurement systems. The method is promising for marine use with small boats in the present form, but might be implemented in conjunction with digital microprocessors for airborne navigation aids.

Burhans, R. W.↗
NASA NTRS1976

Exploratory laser experiments

Experiments are described which were undertaken to explore the application of various dye laser methods for generating laser pulses which could be tuned over H2O absorption lines in the visible and near infrared. Specific topics discussed include: operation of a long pulse dye laser with a tunable, narrow band output at high energies near the 5915 A water vapor absorption bands; assembly and operation of a short duration dye laser near the 5915 A water vapor absorption bands; construction of a dye laser to be pumped to operate in the red and near infrared; and preliminary studies of the beam divergence of the output of the a laser-pumped system. Results are summarized.

Source record↗
NASA NTRS1975

Design, fabrication, and test of a graphite/epoxy metering truss

A graphite/epoxy metering truss as applied to the large space telescope was investigated. A full-scale truss was designed, fabricated and tested. Tests included static limit loadings, a modal survey and thermal-vacuum distortion evaluation. The most critical requirement was the demonstration of the dimensional stability provided by the graphite/epoxy truss concept. Crucial to the attainment of this objective was the ability to make very sophisticated thermal growth measurements which was provided by a seven beam laser interferometer. The design of the basic truss elements were tuned to provide the high degree of dimensional stability and stiffness required by the truss. The struts and spider assembly were fabricated with Fiberite's AS/934 and HMS/934 broadgoods. The rings utilized T300 graphite fabricate with the same materials. The predicted performance of the truss was developed using the NASTRAN program. These results showed conformance with the critical stiffness and thermal distortion requirements and correlated well with the test results.

Oken, S.↗
NASA NTRS1976

Instrumentation for measuring aircraft noise and sonic boom

Improved instrumentation suitable for measuring aircraft noise and sonic booms is described. An electric current proportional to the sound pressure level at a condenser microphone is produced and transmitted over a cable and amplified by a zero drive amplifier. The converter consists of a local oscillator, a dual-gate field-effect transistor mixer, and a voltage regulator/impedance translator. The improvements include automatic tuning compensation against changes in static microphone capacitance and means for providing a remote electrical calibration capability.

Zuckerwar, A. J.↗
NASA NTRS1976

Aircraft-mounted crash-activated transmitter device

An aircraft crash location transmitter tuned to transmit on standard emergency frequencies is reported that is shock mounted in a sealed circular case atop the tail of an aircraft by means of a shear pin designed to fail under a G loading associated with a crash situation. The antenna for the transmitter is a metallic spring blade coiled like a spiral spring around the outside of the circular case. A battery within the case for powering the transmitter is kept trickle charged from the electrical system of the aircraft through a break away connector on the case. When a crash occurs, the resultant ejection of the case from the tail due to a failure of the shear pin releases the free end of the antenna which automatically uncoils. The accompanying separation of the connector effects closing of the transmitter key and results in commencement of transmission.

Manoli, R.↗
NASA NTRS1976

A status of progress for the Laser Isotope Separation (LIS) process

An overview of the Laser Isotope Separation (LIS) methodology is given together with illustrations showing a simplified version of the LIS technique, an example of the two-photon photoionization category, and a diagram depicting how the energy levels of various isotope influence the LIS process. Applications were proposed for the LIS system which, in addition to enriching uranium, could in themselves develop into programs of tremendous scope and breadth. These include the treatment of radioactive wastes from light-water nuclear reactors, enriching the deuterium isotope to make heavy-water, and enriching the light isotopes of such elements as titanium for aerospace weight-reducing programs. Economic comparisons of the LIS methodology with the current method of gaseous diffusion indicate an overwhelming advantage; the laser process promises to be 1000 times more efficient. The technique could also be utilized in chemical reactions with the tuned laser serving as a universal catalyst to determine the speed and direction of a chemical reaction.

Delionback, L. M.↗
NASA NTRS1975

Excitation of a Helmholtz resonator by a turbulent boundary layer

A turbulent boundary layer on the fuselage of a glider is used to excite a Helmholtz resonator whose openings are comparable in size to the turbulent eddies in the boundary layer. The resonator was excited at both the Helmholtz frequency and a standing wave frequency. The level of the resonator response and the response frequency are the major results. A shift in the response frequency, compared to acoustic excitation, indicates an interaction of turbulent and acoustic motions and a modification of the orifice end correction. A strong excitation phenomenon occurs when the resonator and boundary layer are tuned, in which case turbulent eddies of about the orifice diameter in size flow past the orifice and impose a frequency equal to one of the resonant frequencies of the resonator.

Panton, R. L.↗
NASA NTRS1976

Correlation of internal surface turbulence with far-field noise of the augmentor wing propulsive-lift concept

A wind tunnel investigation was conducted to determine the nature, strength, and variation with airspeed of the acoustic sources of the augmentor wing propulsive-lift concept. The augmentor wing overall noise is dominated by the high frequency jet mixing noise characteristic of the lobed primary nozzle. The augmentor modifies the intensity and propagation characteristics of the jet sources, especially those that exist inside the augmentor. The interaction of the turbulent flow with the augmentor creates low-frequency, low-intensity surface noise and trailing edge noise. These sources dominate any jet mixing noise that is present at the low frequencies and could become significant if the jet noise was suppressed by treating the augmentor with a lining tuned to the jet noise source location. The far-field noise of the untreated augmentor is unaffected by airspeed; however, this may not be the case when the jet noise is suppressed, because the trailing edge surface pressure and correlations with far-field noise do show a reduction with forward speed.

Falarski, M. D.↗