SEARCH · Engineering Papers

Results for “Tm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Land use mapping using edge density texture measures on Thematic Mapper simulator data

Texture analysis was performed as part of an investigation of the information content of Thematic Mapper (TM) imagery. High altitude aircraft scanner imagery from the Airborne Thematic Mapper (ATM) instrument was acquired over central California and used to simulate TM data. Edge density texture images were constructed by computation of proportions of edge pixels in a 31 x 31 moving window on a near infrared ATM band. A training technique was employed to select computational parameters to maximize the difference between edge density measurements in urban and in rural areas. The results of classification of the texture images showed that urban and rural areas could be distinguished with texture alone, indicating that inclusion of texture in automated classification procedures could significantly improve their accuracy.

Hlavka, C. A.↗

NASA NTRS1985

Modified cubic convolution resampling for Landsat

An overview is given of Landsat Thematic Mapper resampling technique, including a modification of the well-known cubic convolution interpolator (nearest neighbor interpolation) used to provide geometric correction for TM data. Post launch study has shown that the modified cubic convolution interpolator can selectively enhance or suppress frequency bands in the output image. This selectivity is demonstrated on TM Band 3 imagery.

Prakash, A.↗

NASA NTRS1985

Analysis of data acquired by Shuttle Imaging Radar SIR-A and Landsat Thematic Mapper over Baldwin County, Alabama

Seasonally compatible data collected by SIR-A and by Landsat 4 TM over the lower coastal plain in Alabama were coregistered, forming a SIR-A/TM multichannel data set with 30 m x 30 m pixel size. Spectral signature plots and histogram analysis of the data were used to observe data characteristics. Radar returns from pine forest classes correlated highly with the tree ages, suggesting the potential utility of microwave remote sensing for forest biomass estimation. As compared with the TM-only data set, the use of SIR-A/TM data set improved classification accuracy of the seven land cover types studied. In addition, the SIR-A/TM classified data support previous finding by Engheta and Elachi (1982) that microwave data appear to be correlated with differing bottomland hardwood forest vegetation as associated with varying water regimens (i.e., wet versus dry).

Wu, S.-T.↗

NASA NTRS1986

LANDSAT imagery of the Central Andes

The central Andes of South America extend from approximately 14 deg. S to 28 deg. S as an unbroken chain of mountains and volcanoes over 2000 km long. It is here that the Nazca plate dives under the South American plate at angles varying from 10 deg to 30 deg. Very little is known about the volcanoes comprising this classic, subduction-type plate margin. A catalogue of the volcanoes in the central Andes is being prepared by Dr. P.W. Francis and Dr. C.A. Wood at the NASA Lunar and Planetary Institute. At present, more than 800 volcanoes of Cenozoic age have been recognized in the chain, with an estimated 75-80 major, active Quarternary volcanoes. Approximately one hundred 1536 x 1536 pixel color composite Optronics positives were produced from six full LANDSAT Thermatic Mapper scenes and three partial TM scenes. These positives cover a large portion of the central Andes. The positives were produced from LANDSAT data using the VAX imaging package, LIPS. The scenes were first transferred from magnetic tape to disk. The LIPS package was then used to select volcanically interesting areas which were then electronically enhanced. Finally, the selected areas were transferred back to tape and printed on the Optronics equipment. The pictures are color composites using LANDSAT TM bands 7,4, and 2 in the red, green, and blue filters, respectively.

Komer, C. A.↗

NASA NTRS1986

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain and Kane Springs Wash volcanic centers, southern Nevada

Surface coatings on volcanic rock assemblages that occur at select tertiary volcanic centers in southern Nevada were investigated using LANDSAT 5 Thematic Mapper imagery. Three project sites comprise the subject of this study: the Kane Springs Wash, Black Mountain, and Stonewall Mountain volcanic centers. LANDSAT 5 TM work scenes selected for each area are outlined along with local area geology. The nature and composition of surface coatings on the rock types within the subproject areas are determined, along with the origin of the coatings and their genetic link to host rocks, geologic interpretations are related to remote sensing units discriminated on TM imagery. Image processing was done using an ESL VAX/IDIMS image processing system, field sampling, and observation. Aerial photographs were acquired to facilitate location on the ground and to aid stratigraphic differentiation.

Taranik, J. V.↗

NASA NTRS1986

Tectonic evaluation of the Nubian shield of Northeastern Sudan using thematic mapper imagery

Bechtel is nearing completion of a one-year program that uses digitally enhanced LANDSAT Thematic Mapper (TM) data to compile the first comprehensive regional tectonic map of the Proterozoic Nubian Shield exposed in the northern Red Sea Hills of northeastern Sudan. The status of significant objectives of this study are given. Pertinent published and unpublished geologic literature and maps of the northern Red Sea Hills to establish the geologic framework of the region were reviewed. Thematic mapper imagery for optimal base-map enhancements was processed. Photo mosaics of enhanced images to serve as base maps for compilation of geologic information were completed. Interpretation of TM imagery to define and delineate structural and lithogologic provinces was completed. Geologic information (petrologic, and radiometric data) was compiled from the literature review onto base-map overlays. Evaluation of the tectonic evolution of the Nubian Shield based on the image interpretation and the compiled tectonic maps is continuing.

Source record↗

NASA NTRS1987

Modeling energy flow and nutrient cycling in natural semiarid grassland ecosystems with the aid of thematic mapper data

Energy flow and nutrient cycling were modeled as affected by herbivory on selected intensive sites along gradients of precipitation and soils, validating the model output by monitoring selected parameters with data derived from the Thematic Mapper (TM). Herbivore production was modeled along the gradient of soils and herbivory, and validated with data derived from TM in a spatial data base.

Lewis, James K.↗

NASA NTRS1986

The effect of spatial resolution on satellite derived cloud cover

The effects of a varying sensor spatial resolution on the cloud fraction derived by reflectance threshold (RT), IR temperature threshold (IRT), hybrid bispectral threshold (HBT) and spatial coherence (SC) methods for cloud retrieval from remotely sensed data were examined experimentally. Eight subscenes from four scenes acquired with the Landsat Thematic Mapper (TM) in 1982, 1983 and 1985 were used in the trials. All cloud retrieval methods were applied to extract the cloud fraction in all the subscences for comparison with the total cloud amount determined from the TM band 4 data, which had 28.5 m resolution.

Wielicki, B. A.↗

NASA NTRS1986

Wetland physical and biotic studies using multispectral data

A November 1982 Landsat-4 TM scene and March and September 1984 airborne L-band radar data for a brackish-wetland area of the Blackwater National Wildlife Refuge (near Chesapeake Bay) are analyzed to monitor changes in vegetation and water area. The accuracy of level-I classification of the TM image is found to be 81 percent, but that of the few level-II/III classes for which ground truth was available is only 53 percent. The value of radar images for discriminating water areas obscured by vegetation and estimating plant heights is indicated.

Ormsby, J. P.↗

NASA NTRS1986

Floodplain land cover mapping using Thematic Mapper data

The accuracy of land-cover classifications based on Landsat-4 TM and MSS images (obtained in August 1982) and airborne TMS images (obtained in September 1981) of the New Martinsville, West Virginia area is evaluated by comparison with ground-truth data. TM, TMS, and MSS are found to have overall mapping accuracies 80.1, 78.5, and 75.6 percent; agriculture/grass accuracies 62.0, 29.7, and 46.6 percent; and developed-area accuracies 67.2, 77.8, and 59.4 percent, respectively.

Kerber, A. G.↗

NASA NTRS1986

The nature of the bonding in the transition metal trimers

The electronic structure of the transition metal (TM) trimers was studied by comparing the bonding in the Ca3, Sc3, and Cu3 molecules. The complete active space SCF/externally contracted configuration interaction (CI) ratio for the low-lying states of Sc3 and Sc3(+) and the SCF/CI ratio for Ca3 and Cu3 trimers, all for near equilateral triangle geometries, were calculated. In addition, vertical excitation energies for Cu3 were computed, leading to a new assignment of the upper state in the resonant two-photon ionization spectrum. Based on these studies, bonding in other TM trimers was discussed.

Walch, Stephen P.↗

NASA NTRS1986

POLYSITE - An interactive package for the selection and refinement of Landsat image training sites

A versatile multifunction package, POLYSITE, developed for Goddard's Land Analysis System, is described which simplifies the process of interactively selecting and correcting the sites used to study Landsat TM and MSS images. Image switching between the zoomed and nonzoomed image, color and shape cursor change and location display, and bit plane erase or color change, are global functions which are active at all times. Local functions possibly include manipulation of intensive study areas, new site definition, mensuration, and new image copying. The program is illustrated with the example of a full TM maser scene of metropolitan Washington, DC.

Mack, Marilyn J. P.↗

NASA NTRS1986

Remote detection of forest damage

The use of remote sensing to discriminate, measure, and map forest damage is evaluated. TM spectal coverage, a helicopter-mounted radiometer, and ground-based surveys were utilized to examine the responses of the spruces and firs of Camels Hump Mountain, Vermont to stresses, such as pollution and trace metals. The basic spectral properties of vegetation are described. Forest damage at the site was estimated as 11.8-76.0 percent for the spruces and 19-43.8 percent for the balsam firs. Shifts in the spectra of the conifers in particular in the near IR region are analyzed, and variations in the mesophyll cell anatomy and pigment content of the spruces and firs are investigated. The relations between canopy moisture and damage is studied. The TM data are compared to aircraft data and found to be well correlated.

Rock, B. N.↗

NASA NTRS1987

Thematic Mapper bandpass solar exoatmospheric irradiances

Based on solar irradiance data published by Neckel and Labs (1984) and Iqbal (1983), the solar exoatmospheric irradiances for Thematic Mapper (TM) bands 1, 2, 3, and 4 have been calculated. Results vary by up to 1 percent from previous published values, which were based on the earlier data of Neckel and Labs. For TM bands 5 and 7, integrated solar exoatmospheric irradiances have also been recalculated using solar irradiance data published by Labs and Neckel (1968), Arvesen et al. (1969), and Iqbal (1983). These irradiances vary by up to 6 percent from previously published results, which were based on data published by Thekaekara (1972).

Markham, B. L.↗

NASA NTRS1987

Airborne remote sensing of forest biomes

Airborne sensor data of forest biomes obtained using an SAR, a laser profiler, an IR MSS, and a TM simulator are presented and examined. The SAR was utilized to investigate forest canopy structures in Mississippi and Costa Rica; the IR MSS measured forest canopy temperatures in Oregon and Puerto Rico; the TM simulator was employed in a tropical forest in Puerto Rico; and the laser profiler studied forest canopy characteristics in Costa Rica. The advantages and disadvantages of airborne systems are discussed. It is noted that the airborne sensors provide measurements applicable to forest monitoring programs.

Sader, Steven A.↗

NASA NTRS1987

An analysis of electromagnetic coupling and eigenfrequencies for microwave electrothermal thruster discharges

This paper discusses the basic approach to developing a comprehensive electromagnetic model for a microwave electrothermal discharge. The discharge and surrounding region are modeled as a section of waveguide loaded with a uniform, cold, lossy plasma. A characteristic equation has been derived describing all possible system modes. In particular the TM(01) mode is numerically solved. Propagation and attenuation constants for the TM(01) mode are found numerically for a given range of electron-neutral collision frequencies and plasma densities. Results are used to interpret a number of experimental observations in helium. Specifically, they are used to explain high coupling efficiencies and ease of cavity tuning at high pressures.

Frasch, L. L.↗

NASA NTRS1987

On dynamic loads in parallel shaft transmissions. 1: Modelling and analysis

A model of a simple parallel-shaft, spur-gear transmission is presented. The model is developed to simulate dynamic loads in power transmissions. Factors affecting these loads are identified. Included are shaft stiffness, local compliance due to contact stress, load sharing, and friction. Governing differential equations are developed and a solution procedure is outlined. A parameter study of the solutions is presented in NASA TM-100181 (AVSCOM TM-87-C-3).

Lin, Edward Hsiang-Hsi↗

NASA NTRS1987

On dynamic loads in parallel shaft transmissions. 2: Parameter study

Solutions to the governing equations of a spur gear transmission model, developed in NASA TM-100180 (AVSCOM TM-87-C-2), are presented. Factors affecting the dynamic load are identified. It is found that the dynamic load increases with operating speed up to a system natural frequency. At operating speeds beyond the natural frequency the dynamic load decreases dramatically. Also. it is found that the applied load and shaft inertia have little effect on the dynamic load. Damping and friction decrease the dynamic load. Finally, tooth stiffness has a significant effect on dynamic loading; the higher the stiffness, the lower the dynamic loading. Also, the higher the stiffness the higher the rotating speed required for dynamic response.

Lin, Edward Hsiang-Hsi↗