Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Temperature model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The effect of droplets in the air-sea transition zone on the sea brightness temperature

A model is presented which shows that, for a fully developed sea driven by the wind with speeds above 5 m/sec the air in the transition zone immediately above the air-sea interface is mixed with sea water droplets from bursting air bubbles. The absorptive droplet concentration in the zone is assumed to have a profile tapering off from the interface to zero at a certain height. The dielectric constant of the absorptive inhomogeneous droplet profile is thus both a function of the wind speed and the height above the interface. Both the inhomogeneity effect and the absorption-emission effect of the droplet concentration have been considered. Theoretical calculations show that the presence of the absorptive inhomogeneous droplet transition zone significantly increases the sea brightness temperature as wind speed rises. Combined effects of both the droplet areas and the foam areas on sea surface have also been considered.

Tang, C. C. H.↗
NASA NTRS2016

First-Order SPICE Modeling of Extreme-Temperature 4H-SiC JFET Integrated Circuits

A separate submission to this conference reports that 4H-SiC Junction Field Effect Transistor (JFET) digital and analog Integrated Circuits (ICs) with two levels of metal interconnect have reproducibly demonstrated electrical operation at 500 C in excess of 1000 hours. While this progress expands the complexity and durability envelope of high temperature ICs, one important area for further technology maturation is the development of reasonably accurate and accessible computer-aided modeling and simulation tools for circuit design of these ICs. Towards this end, we report on development and verification of 25 C to 500 C SPICE simulation models of first order accuracy for this extreme-temperature durable 4H-SiC JFET IC technology. For maximum availability, the JFET IC modeling is implemented using the baseline-version SPICE NMOS LEVEL 1 model that is common to other variations of SPICE software and importantly includes the body-bias effect. The first-order accuracy of these device models is verified by direct comparison with measured experimental device characteristics.

JFET↗
DOE OSTI2025

Progress Towards the Validation of a new RELAP5-3D model of the High Temperature Test Facility

Validation is a key step in the development of any type of systems model. As the next generation of reactors approaches, the need for codes that have been validated for these new types of systems continues to grow. An example of a prominent option is the Reactor Excursion Leak Analysis Program (RELAP5-3D), developed by Idaho National Laboratory. This code was developed for the purpose of systems level thermal-hydraulic modeling of light water reactors (LWRS) and postulated transients that can occur in LWRS.RELAP5-3D has been substantially validated against LWR data. Due to its long history as a reactor safety analysis tool, there has been an effort to adapt RELAP5-3D for the purposes of advanced reactor concepts such as prismatic high-temperature gas-cooled reactors (HTGRs). However, RELAP5-3D has not nearly been validated and verified for HTGRs to the degree of LWRs, warranting verification and validation opportunities with computational benchmarks and existing experimental facilities. Examples of such facilities include the modular high-temperature gas-cooled reactor (MHTGR) 350 and the high temperature engineering test reactor (HTTR) from Japan. The MHTGR 350 is a benchmark design concept for code-to-code verification purposes; therefore, it does not provide any experimental data for validation opportunities The HTTR provides useful multiphysics validation data but does not have the in-core instruments to generate thermal-hydraulic experimental data to help with RELAP5-3D validation. Consequently, a facility that could provide key in-core temperatures for thermal-hydraulic validation was still needed. The High Temperature Test Facility (HTTF) is an integral effects facility for HTGR thermal hydraulics developed and operated by Oregon State University. HTTF represents ¼ length scale of the General Atomics MHTGR and is rated for a total power of 2.2 MW. Axially, the core consists of an upper and lower reflector and 10 blocks, numbered from bottom to top (Block 1 is right above lower reflector). The core is heated via graphite resistive heater rods, with respective channels distributed throughout the core. The primary coolant is helium and heat can radiate out of the core to the reactor cavity cooling system (RCCS), which is cooled by water. The primary purpose of the facility is to investigate pressurized conduction cooldown (PCC) and depressurized conduction cooldown (DCC) transients, which are also referred to as the pressurized and depressurized loss of forced cooling respectively. Two experiments were chosen to perform the validation study with a RELAP5-3D model of HTTF. These experiments are PG-27 (PCC) and PG-29 (DCC). These were chosen based off of the quality of available experimental data before and during the experiment which led to their inclusion in the HTGR Thermal Hydraulics Benchmark.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Modeling a High-Temperature Electrochemically Driven Water-Gas-Shift Process Using a Mixed-Conducting Membrane without External Electrical Power

This paper develops a model to predict and interpret the performance of an elevated-temperature, electrochemical, membrane-assisted, water-gas-shift process. The process uses separated feed streams of H 2 O and CO to produce separated streams of H 2 and CO 2 , without an external electrical power source. The dense ceramic membrane is mixed ionic-electronic-conducting (MIEC) gadolinium-doped ceria (GDC) and the porous composite electrodes are Ni-YSZ. At elevated temperature, GDC conducts both oxygen ions and small polarons. The present process uses chemical potential to drive the process. Electrochemical oxidation of CO proceeds within the composite anode and H 2 O reduction proceeds within the composite cathode. At high temperature (e.g., T > 700 °C), GDC has significant electronic leakage in the form of a reduced-cerium small polaron, which supports the charge-transfer reactions. In a typical electrolyzer or fuel cell, this leakage is significantly problematic. However, the present process depends on the leakage current to complete the electrochemical circuit. Model development and validation is based on measured material properties and reactor performance. Potential applications include using CO-rich blast-furnace off gases in steel processing, producing separated streams of H 2 and CO 2 .

Zhu, Huayang↗
DOE OSTI2023

Continuum Damage Mechanics Modeling of High-Temperature Flaw Propagation: Application to Creep Crack Growth In 316H Standardized Specimens and Nuclear Reactor Components

Predicting creep crack growth (CCG) of flaws found during operation in high-temperature alloy components is essential for assessing the remaining lifetime of those components. While defect assessment procedures are available for this purpose in design codes, these are limited in their range of applicability. This study assesses the application of a local damage-based finite-element methodology as a more general technique for the prediction of CCG at high temperatures on a variety of structural configurations. Numerical results for stainless steel 316H, which are validated against experimental data, show the promise of this approach. This integration of continuum damage mechanics (CDM) based methodologies, together with adequate inelastic models, into assessment procedures can therefore inform the characterization of CCG under complex operating conditions, while avoiding excessive conservatism. This article shows that such modeling frameworks can be calibrated to experimental data and used to demonstrate that the degree of tri-axiality ahead of a growing creep crack affects its rate of growth. The framework is also successfully employed in characterizing CCG in a realistic reactor pressure vessel geometry under an arbitrary loading condition. These results are particularly relevant to the nuclear power industry for defect assessment and inspections as part of codified practices of structural components with flaws in high-temperature reactors.

42 ENGINEERING↗
NASA NTRS2018

Introduction to CAUSES: Description of Weather and Climate Models and Their Near‐Surface Temperature Errors in 5 Day Hindcasts near the Southern Great Plains

We introduce the Clouds Above the United States and Errors at the Surface (CAUSES) project with its aim of better understanding the physical processes leading to warm screen temperature biases over the American Midwest in many numerical models. In this first of four companion papers, 11 different models, from nine institutes, perform a series of 5 day hindcasts, each initialized from reanalyses. After describing the common experimental protocol and detailing each model configuration, a gridded temperature data set is derived from observations and used to show that all the models have a warm bias over parts of the Midwest. Additionally, a strong diurnal cycle in the screen temperature bias is found in most models. In some models the bias is largest around midday, while in others it is largest during the night. At the Department of Energy Atmospheric Radiation Measurement Southern Great Plains (SGP) site, the model biases are shown to extend several kilometers into the atmosphere. Finally, to provide context for the companion papers, in which observations from the SGP site are used to evaluate the different processes contributing to errors there, it is shown that there are numerous locations across the Midwest where the diurnal cycle of the error is highly correlated with the diurnal cycle of the error at SGP. This suggests that conclusions drawn from detailed evaluation of models using instruments located at SGP will be representative of errors that are prevalent over a larger spatial scale.

Morcrette, C. J.↗
NASA NTRS2018

Accounting for Static and Dynamic Open Water in the Modeling of SMAP Brightness Temperatures over Peatlands

Hydrological change in peatlands due to anthropogenic disturbance and global warming can release enormous amounts of greenhouse gas emissions. Passive microwave satellite observations are an opportunity to globally monitor these changes. Abundant static and dynamic open water surfaces in peatlands strongly affect observed brightness temperatures (Tb). Here, we account for these contributions in radiative transfer modeling using NASA's Goddard Earth Observing System Model version 5 (GEOS-5) static open water mask and, for the dynamic open water fraction, the simulated inundated area using a version of the GEOS-5 Catchment land surface model that has been modified for peatland areas (PEAT-CLSM). Modeled Tb is compared against two years of SMAP L-band Tb. Preliminary results indicate: (i) a bias reduction when including the static open water fraction in a simple RTM mixing model, and ii) significantly improved correlation between modeled and observed Tb when using land surface output from PEAT-CLSM instead of the operational CLSM.

passive microwave↗
NASA NTRS2023

A Comparison of Passive Microwave Emission Models for Estimating Brightness Temperature at L- and P-band Under Bare and Vegetated Soil Conditions

P-band radiometry has been demonstrated to have a deeper sensing depth than at L-band, making the consideration of multi-layer microwave interactions necessary. Additionally, the scattering and phase interference effects are different at P-band, requiring a re-consideration of the need for coherent models. However, the impact remains to be clarified, and understanding the validity and limitations of these models at both L-band and P-band is crucial for their refinement and application. Therefore, two general categories of microwave emission models, including two stratified coherent models (Njoku and Wilhite) and four incoherent models (conventional tau-omega model and three multi-layer models being zero-order, first-order, and incoherent solution), were intercompared for the first time on the same dataset. This evaluation utilized observations of L-band and P-band radiometry under different land cover conditions from a tower-based experiment in Victoria, Australia. Model estimations of brightness temperature (TB) were consistent with measurements, with the lowest root mean square error (RMSE) at P-band V-polarization under corn (2 K) and the highest RMSE at L-band H-polarization under bare soil (13 K). Coherent models performed slightly better than incoherent models under bare soil (3 K less RMSE), while the opposite was true under vegetated soil conditions (1 K less RMSE). Coherent and incoherent models showed maximum differences (3 K at P-band, 2 K at L-band), correlating strongly with soil moisture variations at 0-10 cm. Findings suggest that coherent and incoherent models perform similarly; thus, incoherent models may be preferable for estimating TB at L- and P-band due to reduced computational complexity.

Soil moisture profile↗
DOE OSTI2019

Modeling the effect of temperature gradient on moisture and ionic transport in concrete

Most reinforced concrete structures are under the influence of environmental conditions, such as temperature fluctuations, moisture and chloride variations simultaneously. Thus, the moisture transfer in concrete is driven by the moisture gradient as well as the temperature gradient. Similarly, the ionic transfer in concrete is driven by the concentration gradient of the ion as well as the temperature gradient. This paper developed an analytical solution that can be used for the moisture or the chloride transport in concrete considering the effect of temperature gradient. The effect of mass transfer on the thermal conduction was not considered, so the problem is simplified as a one-way coupled problem. The analytical model was validated by using two CASE studies, in which realistic material parameters of concrete were used, the parameters were obtained from experiments in the literature. The comparisons between analytical results and experimental results showed good agreement. It indicated that the present model can successfully characterize the effect of temperature gradient on moisture transfer and the effect of temperature gradient on chloride transport in concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Triangular lattice Hubbard model physics at intermediate temperatures

Moiré systems offer an exciting playground to study the many-body effects of strongly correlated electrons in regimes that are not easily accessible in conventional material settings. Motivated by a recent experiment on WSe 2 /WS 2 moiré bilayers [Y. Tang et al., Nature (London) 579, 353 (2020)], which realized a triangular superlattice with a small hopping (of approximately 10 Kelvin), with tunable density of holes, we explore the Hubbard model on the triangular lattice for intermediate temperatures t ≲ T < U. Employing finite-temperature Lanczos calculations and closely following the fitting protocols used in the experiment, we recover the observed trends in the reported Curie-Weiss temperature Θ with filling, using the reported interaction strength U/t=20. Here, we focus on the large increase of |Θ| on decreasing the density below half filling and the sign change of Θ at higher fillings, which signals the onset of ferromagnetism. The increase in |Θ| is also seen in the t–J model (the low-energy limit of the Hubbard model) in the intermediate temperature range, which we clarify is opposite to the trend in its high temperature limit. Differences between the low, intermediate, and high temperature regimes are discussed. Our numerical calculations also capture the crossover between short-range antiferromagnetic to ferromagnetic order in the intermediate temperature regime, a result broadly consistent with the experimental findings. We find that this behavior is a finite-temperature remnant of the underlying zero-temperature phase transition, which we explore with ground-state density matrix renormalization group calculations. We provide evidence of ferromagnetism characterized by weak (but robust) correlations that explain the small Θ seen in the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A Potts Model parameter study of particle size, Monte Carlo temperature, and “Particle-Assisted Abnormal Grain Growth”

A Potts Model was proposed to account for temperature and particle heterogeneity-dependent Zener Pinning. This was accomplished by relating the random fluctuations of grain boundary position allowed by the Potts Model switching probability at finite simulation temperature to experimentally observed grain growth stagnation behavior. We assume that these fluctuations arise from random fluctuations in the thermodynamic and kinetic properties of the grain boundaries and/or interfaces as they change with temperature. As an application of this model, the grain growth kinetics of U-10 wt. % Mo nuclear fuels were simulated with the input of microstructural images during different heat treatment processes. Simulated average grain growth behavior is in good agreement with experiments.

Frazier, William E.↗
DOE OSTI2014

Modeling the irradiance and temperature dependence of photovoltaic modules in PVsyst

In order to reliably simulate the energy yield of photovoltaic (PV) systems, it is necessary to have an accurate model of how the PV modules perform with respect to irradiance and cell temperature. Building on previous work that addresses the irradiance dependence, two approaches to fit the temperature dependence of module power in PVsyst have been developed and are applied here to recent multi-irradiance and -temperature data for a standard Yingli Solar PV module type. The results demonstrate that it is possible to match the measured irradiance and temperature dependence of PV modules in PVsyst. As a result, improvements in energy yield prediction using the optimized models relative to the PVsyst standard model are considered significant for decisions about project financing.

14 SOLAR ENERGY↗
DOE OSTI2013

Dark radiation and dark matter in supersymmetric axion models with high reheating temperature

Recent studies of the cosmic microwave background, large scale structure, and big bang nucleosynthesis (BBN) show trends towards extra radiation. Within the framework of supersymmetric hadronic axion models, we explore two high-reheating-temperature scenarios that can explain consistently extra radiation and cold dark matter (CDM), with the latter residing either in gravitinos or in axions. In the gravitino CDM case, axions from decays of thermal saxions provide extra radiation already prior to BBN and decays of axinos with a cosmologically required TeV-scale mass can produce extra entropy. In the axion CDM case, cosmological constraints are respected with light eV-scale axinos and weak-scale gravitinos that decay into axions and axinos. These decays lead to late extra radiation which can coexist with the early contributions from saxion decays. Recent results of the Planck satellite probe extra radiation at late times and thereby both scenarios. Further tests are the searches for axions at ADMX and for supersymmetric particles at the LHC.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Forecasting constraints on the high-z IGM thermal state from the Lyman-α forest flux autocorrelation function

ABSTRACT The autocorrelation function of the Lyman-$\alpha$ (Ly $\alpha$) forest flux from high-z quasars probes the small-scale structure of the intergalactic medium (IGM). The thermal state of the IGM, determined by the physics of reionization, sets the small-scale power observed in the Ly $\alpha$ forest. To explore the sensitivity of the autocorrelation function to the IGM’s thermal state, we compute the autocorrelation function from a cosmological hydrodynamical simulation with an instantaneous reionization model and 135 post-processed thermal states. Using mock data sets of 20 quasars, we forecast constraints on $T_0$ and $\gamma$, which characterize the post-processed IGM thermal state, at $5.4 \le z \le 6$. While this model simplifies the IGM’s thermal state, it serves as a key first step in assessing future observational prospects. We also perform an inference test on mocks and re-weight out posterior distributions to guarantee that they exhibit statistically correct behaviour. At $z = 5.4$, we find that an idealized data set constrains $T_0$ to 59 per cent and $\gamma$ to 16 per cent at the 1$\sigma$ equivalent confidence level. To explore more realistic, non-instantaneous reionization scenarios, we analyse four models combining temperature and ultraviolet background (UVB) fluctuations at $z = 5.8$. We find that mock data generated from a model with both temperature and UVB fluctuations can rule out a model with only temperature fluctuations at the $> 1\sigma$ level 73.9 per cent of the time.

Wolfson, Molly↗
NASA NTRS1991

Effects of elevated temperature on the viscoplastic modeling of graphite/polymeric composites

To support the development of new materials for the design of next generation supersonic transports, a research program is underway at NASA to assess the long term durability of advanced polymer matrix composites (PMC's). One of main objectives of the program was to explore the effects of elevated temperature (23 to 200 C) on the constitutive model's material parameters. To achieve this goal, test data on the observed nonlinear, stress-strain behavior of IM7/5260 and IM7/8320 composites under tension and compression loading were collected and correlated against temperature. These tests, conducted under isothermal conditions using variable strain rates, included such phenomena as stress relaxation and short term creep. The second major goal was the verification of the model by comparison of analytical predictions and test results for off axis and angle ply laminates. Correlation between test and predicted behavior was performed for specimens of both material systems over a range of temperatures. Results indicated that the model provided reasonable predictions of material behavior in load or strain controlled tests. Periods of loading, unloading, stress relaxation, and creep were accounted for.

Gates, Thomas S.↗
NASA NTRS2024

Intermediate Temperature Ceramic Heat Pipe Modeling and Optimization

Spacecraft nuclear electric propulsion, as well as other emerging technologies, can benefit from heat pipes with optimal performance in the intermediate temperature, 450–700 K, regime. In this work, a 1D model was developed to investigate the performance of halide working fluids coupled with 3D printed-ceramic shells to operate at 500–600 K and interface with a nuclear electric propulsion system. An initial conceptual design and performance limits of a 3D printed-AlN heat pipe radiator with AlBr 3 as the working fluid is presented. An areal density of 5.2 kg/m 2 and mass per unit heat performance of 1.00kg/kW is estimated.

thermal management↗
DOE OSTI2023

Data-Driven Model Predictive Control for Temperature Management of Heat Pipe Microreactor

To enable the self-regulating capability of heat pipe (HP) microreactors, an anticipatory control strategy through model predictive control (MPC) could proactively respond to potential disturbances and deviations in operating setpoints. However, a key factor prohibiting the widespread adoption of MPCs in nuclear applications is the effort and computational costs associated with learning and calibrating first-principles-based process models when the target system is complex and when there are gaps between modeled and target reactor systems. In this paper, we demonstrate data-driven MPC using three approaches for modeling the system dynamics, including a linear state-space model, feedforward neural network, and recurrent neural networks long short-term memory. We present the development and validation process of each model and compare the performance of data-driven MPCs in controlling the temperatures of selected HPs at the evaporator and condenser regions in a 37-HP-monolith system. Our results show that, qualitatively, all data-driven MPCs are producing similar control actions, while quantitatively, with artificial neural nets (especially feedforward neural nets), MPC can better follow drastic changes in setpoints with smallest errors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗