SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cadmium selenide-zinc selenide film is used as a thin film semiconductor rectifier. The film is vapor-deposited in a controlled concentration gradient into a glass substrate to form the required junctions between vapor-deposited gold electrodes.
The present paper reports on the fabrication, detailed structural characterizations, and theoretical modeling of titanium nitride (TiN) and its isostructural oxide derivative, titanium oxynitride (TiNO) thin films that have excellent plasmonic properties and that also have the potential to overcome the limitation of noble metal and refractory metals. The TiNO films deposited at 700 °C in high vacuum conditions have the highest reflectance (R = ~ 95%), largest negative dielectric constant (ε 1 = –161), and maximal plasmonic figure of merit (FoM = –ε 1 /ε 2 ) of 1.2, followed by the 600 °C samples deposited in a vacuum (R = ~ 85%, ε 1 = –145, FoM = 0.8) and 700 °C–5 mTorr sample (R = ~ 82%, ε 1 = –8, FoM = 0.3). To corroborate our experimental observations, we calculated the phonon dispersions and Raman active modes of TiNO by using the virtual crystal approximation. From the experimental and theoretical studies, a multilayer optical model has been proposed for the TiN/TiNO epitaxial thin films for obtaining individual complex dielectric functions from which many other optical parameters can be calculated. The advantages of oxide derivatives of TiN are the continuation of similar free electron density as in TiN and the acquisition of additional features such as oxygen-dependent semiconductivity with a tunable bandgap.
This manuscript demonstrates ferroelectricity in B-substituted AlN thin films and a complementary set of first-principles calculations to understand their structure-property relationships. Al 1–x B x N films are grown by dual-cathode reactive magnetron sputtering on (110)W/(001)Al 2 O 3 substrates at 300°C at compositions spanning x = 0 to x = 0.20. X-ray diffraction studies indicate a decrease in both the c and a lattice parameters with increasing B concentration, resulting in a decrease in unit cell volume and a constant c/a axial ratio of 1.60 over this composition range. Films with 0.02 ≤ x ≤ 0.15 display ferroelectric switching with remanent polarizations exceeding 125 μCcm –2 while maintaining band gap energies of > 5.2eV. The large band gap allows low frequency hysteresis measurement (200 Hz) with modest leakage contributions. At B concentrations of x > 0.15, c-axis orientation deteriorates and ferroelectric behavior is degraded. Furthermore, density-functional theory calculations corroborate the structural observations and provide predictions for the wurtzite u parameter, polarization reversal magnitudes, and composition-dependent coercive fields.
In this paper we examine the influence of controllable polarization reversal and built-in electric fields on pyroelectric and electrocaloric effects in a BaTiO 3 thin film using a modified indirect method. We find that the magnitude of the sample's change in polarization with temperature is sensitive to the degree of polarization reversal. The pyroelectric response is small at low fractions of switched polarization and grows larger by several factors as larger fractions of polarization are reversed. This polarization reversal-sensitive pyroelectric behavior is the result of an internal built-in field, which has the effect of destabilizing low fractions of switched polarization and producing diminished pyroelectric effect. Greater fractions of switched polarization are more stable against backswitching and permit a larger pyroelectric response. Our findings highlight a characterization method for polarization-dependent pyroelectric effects in ferroelectric thin films, where built-in field effects are also present.
Here, the activation of reactants by catalytically active metal sites at metal-oxide interfaces is important for understanding the effect of metal-support interactions on nanoparticle catalysts and for tuning activity and selectivity. Using a combined experimental and theoretical approach, we studied the activation of H 2 and the effect of CO poisoning on isolated Rh atoms completely or partially covered by a copper oxide (Cu 2 O) thin film. Temperature-programmed desorption (TPD) experiments conducted in ultra-high vacuum (UHV) show that neither a partially nor a fully oxidized Cu 2 O layer grown on a Rh/Cu(111) single-atom alloy can activate hydrogen in UHV. However, in situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments performed at elevated H 2 pressures reveal that Rh significantly accelerates the reduction of these Cu 2 O thin films by hydrogen. Remarkably, the fastest reduction rate is observed for the fully oxidized sample with all Rh sites covered by Cu 2 O. Both TPD and AP-XPS data demonstrate that these covered Rh sites are inaccessible to CO, indicating that Rh under Cu 2 O is active for H 2 dissociation but cannot be poisoned by CO. In contrast, an incomplete oxide film leaves some of the Rh sites exposed and accessible to CO, and hence prone to CO poisoning. Density functional theory calculations demonstrate that unlike many reactions in which hydrogen activation is rate limiting, the rate-determining step in the dissociation of H 2 on thin-film Cu 2 O with Rh underneath is the adsorption of H 2 on the buried Rh site, and once adsorbed, the dissociation of H 2 is barrierless. These calculations also explain why H 2 can only be activated at higher pressures. Together, these results highlight how different the reactivity of atomically dispersed Rh in Cu can be depending on its accessibility through the oxide layer, providing a way to engineer Rh sites that are active for hydrogen activation but resilient to CO poisoning.
As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. In this work, we investigate the optical properties at 1.5 μm wavelengths of rare-earth ions (Er 3+ ) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post-annealing show that ion implantation damage can be repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized. The ion-cavity coupling is observed through a Purcell enhanced fluorescence from which a Purcell factor of 3.8 ± 0.5, compared with waveguide lifetime, is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.
We report on the successful fabrication of (111) oriented thin films of pyrochlore iridate Y 2 Ir 2 O 7 by means of solid phase epitaxy. Essentially, we developed an entirely in situ annealing protocol, which is superior to the conventional ex-situ routine that requires multi-hour annealing to stabilize the proper pyrochlore structure. The morphological quality of the films has been confirmed by x-ray diffraction, reflectivity, and reciprocal space mapping, demonstrating their high crystallinity with a pure pyrochlore phase and an expected epitaxial relation to the substrate. Strikingly, below the magnetic phase transition, the temperature dependence of resistivity shows a power-law behavior with the power exponent of similar to 3/2, characteristic of a Weyl semimetal in the presence of impurities and electron-electron correlations. Finally, below 10K, the magneto-transport measurements reveal the emergence of a non-saturated negative magnetoresistance up to 9T with a small "valley" around zero field. These findings are further interpreted in relation to the weak anti-localization effect and the non-collinear antiferromagnetic ordering on the Ir sublattice.
The development of hybrid inorganic/organic thin-film solar cells on flexible, lightweight, space-qualified, durable substrates provides an attractive solution for fabricating solar arrays with high mass specific power (W/kg). Next generation thin-film technologies may well involve a revolutionary change in materials to organic-based devices. The high-volume, low-cost fabrication potential of organic cells will allow for square miles of solar cell production at one-tenth the cost of conventional inorganic materials. Plastic solar cells take a minimum of storage space and can be inflated or unrolled for deployment. We will explore a cross-section of in-house and sponsored research efforts that aim to provide new hybrid technologies that include both inorganic and polymer materials as active and substrate materials. Research at University of Texas at Arlington focuses on the fabrication and use of poly(isothianaphthene-3,6-diyl) in solar cells. We describe efforts at Norfolk State University to design, synthesize and characterize block copolymers. A collaborative team between EIC Laboratories, Inc. and the University of Florida is investigating multijunction polymer solar cells to more effectively utilize solar radiation. The National Aeronautics and Space Administration (NASA)/Ohio Aerospace Institute (OAI) group has undertaken a thermal analysis of potential metallized substrates as well as production of nanoparticles of CuInS2 and CuInSe2 in good yield at moderate temperatures via decomposition of single-source precursors. Finally, preliminary work at the Rochester Institute of Technology (R.I.T.) to assess the impact on performance of solar cells of temperature and carbon nanotubes is reported. Technologies that must be developed to enable ultra-lightweight solar arrays include: monolithic interconnects, lightweight array structures, and new ultra-light support and deployment mechanisms. For NASA applications, any solar cell or array technology must not only meet weight and AMO efficiency goals, but also must be durable enough to survive launch conditions and space environments.
Objectives: Develop and test various diffusive gradient in thin films (DGT) samplers for mercury - SRNL is developing reactive DGTS (rDGTs). Test chemistry to differentiate methylmercury from total and/or inorganic mercury in environmental samples. Fabricate and test rDGT samplers for deployment. Deploy the rDGTs in variable settings. Mercury is a persistent-bioaccumulative-toxic environmental pollutant. Mercury exists in different species such as elemental, inorganic, and methyl. Mercury speciation determine mercury behavior and toxicity. For example, methylmercury strongly accumulates in biota such as fish resulting in potential human health impacts. DGTs are innovative samplers to measure water concentration by diffusion and capture. Types of Hg DGTs used: Total Hg, Inorganic Hg, and Methyl Hg. Deployment Sites: Upper Three Runs, Lower Three Runs, Steele Creek, East Fork Poplar Creek (SRNL Sites), Horizons Creek, NOA Creek, Bruners Creek (ORNL Sites). DGT concentration estimates closely matched alternative measurements for soluble mercury at each Oak Ridge site - DGTs did not respond to particulate mercury. DGTs provide a representative measure for biota uptake since they are left out longer which allows for an average exposure concentration. DMA-80 provided an efficient and quick analysis. Variability in site location made a difference in Hg species. DGT preparations and sampling wasn't as quick and simple as microcolumn technology. Copper reagent degraded agarose gel - more work and cleaner data are needed to assess speciation in rDGTs. Future Work: Use cross-linked polyacrylamide for the collection layer for a stronger plastic. Make a copper diffusion layer without agarose. Test copper separation in lab using realistic stream conditions such as high organic carbon.
In this project, the objective was to develop new oxygen reduction reaction (ORR) electrocatalysts for proton exchange membrane fuel cells (PEMFCs) which could exceed all of the Department of Energy (DOE) 2020 targets listed in DE-FOA-0001224, Subtopic 1b, Table I. The expected outcome was development of one or more electrocatalysts which are substantially improved over the current state-of-the-art in terms of overall activity, durability, and cost, and are suitable for automotive traction and stationary fuel cell applications. This report summarizes this project’s progress towards meeting the stated objectives and includes a summary of key findings and conclusions. The development activities towards new highly active and durable thin film electrocatalysts has led to the discovery of several electrocatalysts which approached or exceeded several DOE 2020 targets for activity, durability, and performance in proton exchange membrane fuel cell (membrane electrode assemblies (MEAs). In this project, electrocatalyst development focused on systematic physical and electrochemical characterization of electrocatalyst activity, durability, and performance in MEAs as a function of electrocatalyst fabrication, compositional and structural variables. The project approach was to develop relationships between the catalyst functional responses (activity, durability and performance) with catalyst physical properties and catalyst fabrication methods. Additionally, the thin film catalysts were integrated onto the unique and durable 3M Nanostructured Thin Film (NSTF) support, consisting of arrays of self-assembled organic crystalline whiskers. The catalysts were evaluated against the project targets via extensive electrochemical characterization in MEA format at 3M, advanced structural and compositional microscopy at Oak Ridge National Laboratory (ORNL), and atomic structure analysis via XAFS at Argonne National Laboratory (ANL). The extensive electrochemical and physical characterization resulted in development of several trends which correlate the catalysts’ electrochemical properties to their physical properties, including composition, structure, and method of fabrication. The development was guided by density functional theory (DFT) modeling at Purdue University and kinetic Monte Carlo (kMC) modeling at Johns Hopkins University. The catalyst simulations provided key insights into the observed experimental activity and durability trends, and additionally were utilized to assess new electrocatalyst concepts prior to or coincident with physical catalyst development. This development has led to several electrocatalyst candidates with activity and durability which approach or exceed DOE targets. One class of catalysts, based on nm-scale thin layers of Pt on Ir, met or exceeded 6 of the 6 DOE targets the project addressed.
A two-step stratified crystallization process has been directly observed during cooling of poly(3-hexylthiophene) (P3HT) thin films of thickness h = 20-250 nm: a thin (<20 nm) layer at the free surface crystallizes ~25 °C higher than the bulk crystallization temperature (T C,bulk ), whereas the rest of the film (i.e. the underlayer) crystallizes near T C,bulk . In-situ measurements of films with and without a free surface unequivocally ascribe the high-temperature crystallization to a surface-induced process, which correlates with the formation of large birefringent structures and highly oriented edge-on crystallites at the air–polymer interface. In contrast, crystallization of the bulk-like underlayer leads to mostly edge-on-oriented crystallites in thinner films and becomes increasingly isotropic in thicker films. For h < 20 nm, free-surface effects dominate and only high-temperature crystallization is observed. These results highlight the potential of melt crystallization to tailor morphology and orientation across thin film thickness for specific electronic applications.
Superconducting niobium thin film production
The Applied RF Technology Branch of the NASA Glenn Research Center, Cleveland, Ohio, has an on-going effort in the area of thin film ferroelectric technology for microwave applications. Particular attention has been given to developing ferroelectric phase shifters for the implementation and experimental demonstration of an electronically steerable reflectarray antenna. In the process of optimizing these material to fit the implementation requirements of the aforementioned antenna, we have accumulated a great deal of information and knowledge in areas such as the effect of the composition of the ferroelectric thin films on phase shifter performance, self assembled monolayers (SAMs) in the metallic/ferroelectric interface and their impact on phase shifter performance, correlation between microstructure and microwave properties, and the effect of selective etching on the overall performance of a thin film-ferroelectric based microwave component, amongst others. We will discuss these issues and will provide an up-dade of the current development status of the reflect-array antenna.
Tellurium is an elemental semiconductor with a 0.34 eV optical band gap, showing promise for mid-infrared (MIR) optoelectronics including light-emitting diodes. However, quantitative measurement of the tellurium luminescence efficiency has not yet been investigated, and growing optically active films remain challenging. Here, we demonstrate the low-temperature growth of bright tellurium thin films by using physical vapor transport. The sample morphology is controlled by varying the growth temperature, yielding continuous thin films, microparticles, or nanowires. Additionally, we demonstrated patterned growth by using a seed layer for selective nucleation. Quantitative photoluminescence measurements at room temperature reveal an internal quantum yield of 2.0% at 0.34 eV for the as-grown tellurium films, comparable to the best-reported efficiencies of III-V and II-VI compound semiconductors with similar band gaps. Furthermore, we demonstrate band-gap tunability with Te-Se alloys, where up to 20% selenium incorporation gradually blue-shifts the band gap to 0.55 eV. The work demonstrates the potential use of tellurium for efficient MIR devices.
Observations with radio telescopes address key problems in cosmology, astrobiology, heliophysics, and planetary science including the first light in the Universe (Cosmic Dawn), magnetic fields of extrasolar planets, particle acceleration mechanisms, and the lunar ionosphere. The Moon is a unique science platform because it allows access to radio frequencies that do not penetrate the Earth's ionosphere and because its far side is shielded from intense terrestrial emissions. A radio antenna can be realized by using polyimide film as a substrate, with a conducting substance deposited on it. Such an antenna can be rolled into a small volume for transport, then deployed by unrolling, and a robotic rover offers a natural means of unrolling a polyimide film-based antenna. An antenna deployment mechanism was developed that allows a thin film to be deposited onto a ground surface, in a controlled manner, using a minimally actuated rover. The deployment mechanism consists of two rollers, one driven and one passive. The antenna film is wrapped around the driven roller. The passive roller is mounted on linear bearings that allow it to move radially with respect to the driven roller. Springs preload the passive roller against the driven roller, and prevent the tightly wrapped film from unspooling or "bird's nesting" on the driven spool. The antenna deployment mechanism is integrated on the minimally-actuated Axel rover. Axel is a two-wheeled rover platform with a trailing boom that is capable of traversing undulated terrain and overcoming obstacles of a wheel radius in height. It is operated by four motors: one that drives each wheel; a third that controls the rotation of the boom, which orients the body mounted sensors; and a fourth that controls the rover's spool to drive the antenna roller. This low-mass axle-like rover houses its control and communication avionics inside its cylindrical body. The Axel rover teleoperation software has an auto-spooling mode that allows a user to automatically deploy the thin-film antenna at a rate proportional to the wheel speed as it drives the rover along its trajectory. The software allows Axel to deposit the film onto the ground to prevent or minimize relative motion between the film and the terrain to avoid the risk of scraping and antenna with the terrain.
An exhaustive design development study was performed to correlate the survivability of thin film to various parameters. Film material properties, film thicknesses, unsupported window areas, window aspect ratios, film/frame transitions, film reinforcing techniques, and material grain orientations were all considered. Several thin films were tested to acoustical loads which are expected during an Atlas-Centaur launch of the High Energy Astronomy Observatory Satellites (HEAO)
Thin film thickness from theoretical expressions for conductivity and isothermal Hall effect
This paper describes an effort to develop a thin film packaging technology for microfabricated planar antennas on polymeric substrates based on silicon carbide (SiC) films deposited by physical vapor deposition (PVD). The antennas are coplanar waveguide fed dual frequency folded slot antennas fabricated on liquid crystal polymer (LCP) substrates. The PVD SiC thin films were deposited directly onto the antennas by RF sputtering at room temperature at a chamber pressure of 30 mTorr and a power level of 300 W. The SiC film thickness is 450 nm. The return loss and radiation patterns were measured before and after the SiC-coated antennas were submerged into perchloric acid for 1 hour. No degradation in RF performance or physical integrity of the antenna was observed.