Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Evaluation of Crystal Accumulation in High Level Waste Glasses with Research-Scale Melter

The report summarizes the experimental results from a long term Research Scale Melter (RSM) test which was performed at Pacific Northwest National Laboratory (PNNL) in FY16 to answer questions on the effects of spinel crystal accumulation on melter performance and operational longevity. The RSM was used to vitrify a surrogate waste material of the Hanford AZ-101 tank waste composition. This waste contains a high concentration of Fe and Ni and is susceptible to precipitation of a large quantity of spinel crystals during vitrification. The RSM test was run over a period of 11 weeks and consisted of eleven feeding/pouring and idling periods. The feeding/pouring periods were 36 h long while the idling periods ranged from 4 to 7 days. Approximately 509 kg of feed was processed, producing ~159 kg of glass. The main goal of this test was to determine if the riser of the melter can be clogged by accumulated layer of spinel crystals which precipitated from glass during multiple idling’s. In addition, the glass samples were collected during each pouring to evaluate a possibility of a partial or complete removal of crystal deposits accumulated during idling. Furthermore, an electrical conductivity probe was tested for monitoring the crystal accumulation in the riser of the melter during idling’s. The test was concluded by dissecting the melter and preparing cross-sections to determine layer thickness, crystal size and morphology of spinel crystals in the bulk of the melter and in the glass riser.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EMPIRICAL MODEL FOR FORMULATION OF CRYSTAL-TOLERANT HLW GLASSES

Historically, high-level waste (HLW) glasses have been formulated with a low liquideus temperature (T{sub L}), or temperature at which the equilibrium fraction of spinel crystals in the melt is below 1 vol % (T{sub 0.01}), nominally below 1050 C. These constraints cannot prevent the accumulation of large spinel crystals in considerably cooler regions ({approx} 850 C) of the glass discharge riser during melter idling and significantly limit the waste loading, which is reflected in a high volume of waste glass, and would result in high capital, production, and disposal costs. A developed empirical model predicts crystal accumulation in the riser of the melter as a function of concentration of spinel-forming components in glass, and thereby provides guidance in formulating crystal-tolerant glasses that would allow high waste loadings by keeping the spinel crystals small and therefore suspended in the glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EMPIRICAL MODEL FOR FORMULATION OF CRYSTAL-TOLERANT HLW GLASSES

Historically, high-level waste (HLW) glasses have been formulated with a low liquidus temperature (TL), or temperature at which the equilibrium fraction of spinel crystals in the melt is below 1 vol % (T0.01), nominally below 1050°C. These constraints cannot prevent the accumulation of large spinel crystals in considerably cooler regions (~ 850°C) of the glass discharge riser during melter idling and significantly limit the waste loading, which is reflected in a high volume of waste glass, and would result in high capital, production, and disposal costs. A developed empirical model predicts crystal accumulation in the riser of the melter as a function of concentration of spinel-forming components in glass, and thereby provides guidance in formulating crystal-tolerant glasses that would allow high waste loadings by keeping the spinel crystals small and therefore suspended in the glass.

Empirical model↗

Fabrication and characterization of lithium manganese nickel oxide sputtered thin film cathodes for lithium-ion batteries

Li-rich and stoichiometric Li1Mn1.5Ni0.5O4 (LMNO) cathode films have been prepared by magnetron sputtering. Sputtering from a Li stoichiometric target yields Li-rich films composed of spinel, layered and monoclinic phases. Films obtained from a Li deficient target are mostly made of a spinel phase and little layered material. The resulting cathode thin films have good capacity retention and very high rate capability. The reaction mechanism has been investigated by XRD and HRTEM and evidences the reversible formation of a spinel phase, as is also found for the powder samples. The film geometry enables to understand the effect of coatings (ZnO or LiPON). Coating high voltage cathodes reduces the coulombic losses but at the price of rate performance. Nonetheless, these coated sputtered electrode thin films offer a higher rate capability than other LMNO thin films obtained by other physical vapor deposition techniques.

25 ENERGY STORAGE↗

The passivity of low-temperature carburized austenitic stainless steel AISI-316L in a simulated boiling-water-reactor environment

The passive film on low-temperature-carburized AISI-316L austenitic stainless steel was studied in an oxygenated, simulated boiling-water-reactor environment with normal water chemistry. The microstructure was studied using scanning electron microscopy, grazing-incidence X-ray diffractometry, Auger electron spectroscopy, X-ray energy-dispersive spectroscopy, and transmission electron microscopy. For non-surface engineered AISI-316L, three distinct layers were observed after exposure: an outer layer of larger nickel-oxide enriched particles with the spinel structure, an intermediate layer of small Cr-oxide-enriched hematite particles, and a compact inner layer of Cr-enriched oxide also having the spinel structure. Exposure of low-temperature-carburized AISI-316L, in contrast, resulted in only two distinct layers. These layers did not include a compact Cr-rich inner layer. Instead, the innermost layer consisted of an oxide with the spinel structure that was a mixture of Fe, Cr and Ni oxide. The outer layer on the low-temperature-carburized specimen consisted of large loosely stacked particles with the spinel structure of mixed composition. In addition to passive-film characterization, the corrosion rate was studied by monitoring mass loss. Finally, after 500 h of immersion, the mass changes measured were relatively low for all specimens indicating good adhesion and low oxidation rates.

36 MATERIALS SCIENCE↗

Origin of enhanced performance when Mn-rich rocksalt cathodes transform to δ -DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase — named δ — with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the δ -phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of 16 d vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the δ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

Anand, Shashwat↗

Crystallization of synthetic coal-petcoke slag mixtures simulating those encountered in entrained bed slagging gasifiers

Commercial entrained bed slagging gasifiers use a carbon feedstock of coal, petcoke, or combinations of them to produce CO and H{sub 2}. These carbon sources contain mineral impurities that liquefy during gasification and flow down the gasification sidewall, interacting with the refractory linear and solidifying in the cooler zones of the gasifier. Proper slag flow is critical to good gasifier operation. A hot-stage confocal scanning laser microscope (CSLM) was used to analyze the kinetic behavior of slag crystallization for a range of synthetic coal-petcoke mixtures. On the basis of the observed precipitation during cool down studies in the 1200-1700{sup o}C temperature range, a time-temperature-transformation (TTT) diagram was created. The crystallization studies were conducted with a CO/CO{sub 2} (=1.8) corresponding to a gasification PO{sub 2} of approximately 10-8 atm at 1500{sup o}C. Ash chemistries were chosen such that they correspond to coal-petcoke feedstock mixtures with coal ash amounts of 0, 10, 30, 50, 70, and 100% (by weight), with the balance being petcoke ash. The TTT diagram exhibited two crystallization areas, one above and one below 1350{sup o}C. At the nose of the higher temperature curves, karelianite (V{sub 2}O{sub 3}) crystallization occurred and was fastest for a 30% coal-petcoke ash mixture. The second nose was located below 1350{sup o}C and had spinel-type phases that formed at 1200{sup o}C, in which preferred atomic occupation at the octahedral and tetrahedral sites varied depending upon the ash composition. At 1200{sup o}C, an Al-rich spinel formed for 100% coal slag and a Fe-rich spinel formed in petcoke-enriched slags. The addition of petcoke ash to coal ash promoted crystallization in the slag, with additional crystalline phases, such as V-rich spinel, forming at the lower temperatures. These phases were not predicted using commercially available databases. 30 refs., 18 figs.

01 COAL, LIGNITE, AND PEAT↗

Correlating cation ordering and voltage fade in a lithium–manganese-rich lithium-ion battery cathode oxide: a joint magnetic susceptibility and TEM study

Structure–electrochemical property correlation is presented for lithium–manganese-rich layered–layered nickel manganese cobalt oxide (LMR–NMC) having composition Li1.2Co0.1Mn0.55Ni0.15O2 (TODA HE5050) in order to examine the possible reasons for voltage fade during short-to-mid-term electrochemical cycling. The Li1.2Co0.1Mn0.55Ni0.15O2 based cathodes were cycled at two different upper cutoff voltages (UCV), 4.2 V and 4.8 V, for 1, 10, and 125 cycles; voltage fade was observed after 10 and 125 cycles only when the UCV was 4.8 V. Magnetic susceptibility and selected-area electron diffraction data showed the presence of cation ordering in the pristine material, which remained after 125 cycles when the UCV was 4.2 V. When cycled at 4.8 V, the magnetic susceptibility results showed the suppression of cation ordering after one cycle; the cation ordering diminished upon further cycling and was not observed after 125 cycles. Selected-area electron diffraction data from oxides oriented towards the [0001] zone axis revealed a decrease in the intensity of cation-ordering reflections after one cycle and an introduction of spinel-type reflections after 10 cycles at 4.8 V; after 125 cycles, only the spinel-type reflections and the fundamental O3 layered oxide reflections were observed. A significant decrease in the effective magnetic moment of the compound after one cycle at 4.8 V indicated the presence of lithium and/or oxygen vacancies; analysis showed a reduction of Mn4+ (high spin/low spin) in the pristine oxide to Mn3+ (low spin) after one cycle. The effective magnetic moment was higher after 10 and 125 cycles at 4.8 V, suggesting the presence of Mn3+ in a high spin state, which is believed to originate from distorted spinel (Li2Mn2O4) and/or spinel (LiMn2O4) compounds. The increase in effective magnetic moments was not observed when the oxide was cycled at 4.2 V, indicating the stability of the structure under these conditions. This study shows that structural rearrangements in the LMR–NMC oxide happen only at higher potentials (4.8 V, for example) and provides evidence of a direct correlation between cation ordering and voltage fade.

Mohanty, Debasish↗

Unraveling structural evolution of LiNi 0.5 Mn 1.5 O 4 by in situ neutron diffraction

Here, we report that the electrochemical properties of the spinel LiNi 0.5 Mn 1.5 O 4 cathode material are influenced by the synthesis processes, which determines the impurity phase and the distribution of Ni and Mn in the spinel structure. Taking advantage of neutron's high sensitivity to Ni and Mn, in situ neutron diffraction has been employed to quantify the phase formation/structural evolution process under continuous heating/cooling and isothermal annealing conditions. The results show that the subtle Ni and Mn ordering process occurs slowly at 700 °C and the degree of ordering can be controlled by the annealing time. At temperatures above 750 °C, the LiNi 0.5 Mn 1.5 O 4 spinel phase starts to decompose into the rock-salt impurity phase accompanied by the release of O 2 . The rock-salt phase reverts back to the spinel phase upon cooling along with the oxygen uptake. In conclusion, the dynamic process of structural evolution of LiNi 0.5 Mn 1.5 O 4 that was unraveled by in situ neutron diffraction is valuable for guiding the synthesis of cathode materials with desirable properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Cation Migration in Lanthanum Strontium Cobalt Ferrite Solid Oxide Fuel Cell Cathodes via In-Operando X-ray Diffraction

Anode-supported SOFC button cells with LSCF-6428 cathodes were operated at various temperatures under constant current conditions for hundreds of hours in dry or humid (~3% water) cathode air while continuously collecting 1 hour XRD scans throughout the test duration. Additionally, one cell in dry air was held at OCV, and 12% CO2 was added to the humid air for another cell. Long cumulative XRD count times allowed minor phases in concentrations of less than 0.1 wt% to be identified. In humid air, cell performance increased during the first couple of hundred hours. XRD measured a gradual shift of Fe-rich Fe,Co spinel peaks to lower angles while post-mortem SEM discovered nano-nodules on the LSCF surfaces. When 12% CO2 was added to humid air, performance degradation was observed after the initial conditioning response, unlike in tests without CO2, which were stable after conditioning. XRD also measured a shift in the peaks of the major LSCF phase in the test with CO2 indicative of some degree of gradual decomposition. Cells tested at constant current in dry air exhibited fast initial degradation that decelerated over time, while the cell held at OCV maintained a stable voltage. XRD of the cathodes held at OCV at 750 °C and operated at constant current at 700 °C in dry air measured a slower shift of the Fe-rich spinel peaks to lower angles than was seen in tests in humid air, along with a shift in the peaks of a Co-rich Fe,Co spinel to higher angles. Post-mortem SEM of cells exposed to dry air discovered smaller nano-nodules on the LSCF surfaces than had been present in cells tested in humid air. Cells tested at constant current in dry air at 750 °C and 800 °C did not exhibit any gradual changes in the XRD patterns nor were nano-nodules discovered.

Hardy, John S.↗

Pressure-induced order–disorder transitions in β-In 2 S 3 : an experimental and theoretical study of structural and vibrational properties

We report this joint experimental and theoretical study of the structural and vibrational properties of β-In 2 S 3 upon compression shows that this tetragonal defect spinel undergoes two reversible pressure-induced order–disorder transitions up to 20 GPa. We propose that the first high-pressure phase above 5.0 GPa has the cubic defect spinel structure of α-In 2 S 3 and the second high-pressure phase ($\phi$-In 2 S 3 ) above 10.5 GPa has a defect α-NaFeO 2 -type (R$\bar{3}$) structure. This phase, related to the NaCl structure, has not been previously observed in spinels under compression and is related to both the tetradymite structure of topological insulators and to the defect LiTiO 2 phase observed at high pressure in other thiospinels. Structural characterization of the three phases shows that α-In 2 S 3 is softer than β-In 2 S 3 while $\phi$-In 2 S 3 is harder than β-In 2 S 3 . Vibrational characterization of the three phases is also provided, and their Raman-active modes are tentatively assigned. Our work shows that the metastable α phase of In 2 S 3 can be accessed not only by high temperature or varying composition, but also by high pressure. On top of that, the pressure-induced β–α–$\phi$ sequence of phase transitions evidences that β-In 2 S 3 , a B III 2 X V 3 compound with an intriguing structure typical of A II B III 2 X VI 4 compounds (intermediate between thiospinels and ordered-vacancy compounds) undergoes: (i) a first phase transition at ambient pressure to a disordered spinel-type structure (α-In 2 S 3 ), isostructural with those found at high pressure and high temperature in other B III 2 X V 3 compounds; and (ii) a second phase transition to the defect α-NaFeO 2 -type structure ($\phi$-In 2 S 3 ), a distorted NaCl-type structure that is related to the defect NaCl phase found at high pressure in A II B III 2 X VI 4 ordered-vacancy compounds and to the defect LiTiO 2 -type phase found at high pressure in A II B III 2 X VI 4 thiospinels. This result shows that In 2 S 3 (with its intrinsic vacancies) has a similar pressure behaviour to thiospinels and ordered-vacancy compounds of the A II B III 2 X VI 4 family, making β-In 2 S 3 the union link between such families of compounds and showing that group-13 thiospinels have more in common with ordered-vacancy compounds than with oxospinels and thiospinels with transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of the d 0 transition metal on local structural transformations in disordered rock salt cathodes

Although it is widely accepted that the long-range (average) crystal structure plays a critical role in determining the electrochemical performance of battery materials, the relationship between local structural features and electrochemical performance is rarely studied. Disordered rock salt oxides (DRX), which have become serious contenders for next generation Li-ion electrode materials, provide an ideal platform for exploring correlations between local structure and electrochemical performance as they exhibit a simple face-centered cubic structure and combine long-range disorder and short-range order on the cation sublattice. This work examines the Li 1.1 Mn 0.7 Zr 0.2−x Ti x O 2 series of DRX cathodes and investigates the links between local structure rearrangements and capacity activation. The end-member Li 1.1 Mn 0.7 Zr 0.2 O 2 compound exhibits a low capacity in the as-synthesized state, attributed to unfavorable short-range order that hinders Li-ion transport, yet its capacity increases seven-fold, from 20 to 140 mAh g −1 , after chemical delithiation followed by a 400 °C heat treatment. Capacity activation is associated with the appearance of local spinel-like structural features that depart from the short-range order originally present in the material, without significant change to the bulk composition and average crystal structure. Investigation of a series of Li 1.1 Mn 0.7 Zr 0.2−x Ti x O 2 (x ≤ 0.2) DRX compounds reveals that the correlation length of the spinel-like ordering that emerges during the heat treatment strongly depends on the Zr : Ti ratio. Yet, dramatic capacity activation and electrochemical (pseudo-)plateaus reminiscent of Mn-based spinel cathodes are observed for all compounds irrespective of the size of the ordered domains. To explain this phenomenon, we propose that the DRX phase undergoes a complete transformation to a spinel-like domain structure, which improves bulk Li-ion transport regardless of domain size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Zn-doping on structural and magnetic properties of copper ferrite nanoparticles

The nanoparticles of CuFe{sub 2}O{sub 4} (CF) and Cu{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} (CZF) were synthesized using co-precipitation method to study the effect of Zn doping in Cu-ferrite. The X-ray diffraction (XRD) patterns were well fitted with two-phase structure using Rietveld analysis as Fd-3 m space group (spinel system) and C12/c1 space group (monoclinic system CuO-phase). The average crystallite size of the CF and CZF nanoparticles for spinel structure are 6 and 7 nm respectively. The spinel phase fraction is increased from 56% to 71% with Zn-doping of 20% in CF. The transmission electron micrograph analysis showed the narrow size distribution for CZF nanoparticles. The magnetization plots as a function of magnetic field (M (H)) of CF and CZF nanoparticles indicate superparamagnetic behavior. The magnetization is increased with Zn-doping in CF. The stable spinel Cu-ferrite can be obtained with Zn-doping in CF.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗

A laboratory nanoseismological study on deep-focus earthquake micromechanics

Global earthquake occurring rate displays an exponential decay down to ~300 km and then peaks around 550 to 600 km before terminating abruptly near 700 km. How fractures initiate, nucleate, and propagate at these depths remains one of the greatest puzzles in earth science, as increasing pressure inhibits fracture propagation. We report nanoseismological analysis on high-resolution acoustic emission (AE) records obtained during ruptures triggered by partial transformation from olivine to spinel in Mg 2 GeO 4 , an analog to the dominant mineral (Mg,Fe) 2 SiO 4 olivine in the upper mantle, using state-of-the-art seismological techniques, in the laboratory. AEs’ focal mechanisms, as well as their distribution in both space and time during deformation, are carefully analyzed. Microstructure analysis shows that AEs are produced by the dynamic propagation of shear bands consisting of nanograined spinel. These nanoshear bands have a near constant thickness (~100 nm) but varying lengths and self-organize during deformation. This precursory seismic process leads to ultimate macroscopic failure of the samples. Several source parameters of AE events were extracted from the recorded waveforms, allowing close tracking of event initiation, clustering, and propagation throughout the deformation/transformation process. AEs follow the Gutenberg-Richter statistics with a well-defined b value of 1.5 over three orders of moment magnitudes, suggesting that laboratory failure processes are self-affine. The seismic relation between magnitude and rupture area correctly predicts AE magnitude at millimeter scales. A rupture propagation model based on strain localization theory is proposed. Future numerical analyses may help resolve scaling issues between laboratory AE events and deep-focus earthquakes.

58 GEOSCIENCES↗

Crystallization in High-Level Waste Glass: A Review of Glass Theory and Noteworthy Literature

There is a fundamental need to continue research aimed at understanding nepheline and spinel crystal formation in high-level waste (HLW) glass. Specifically, the formation of nepheline solids (K/NaAlSiO 4 ) during slow cooling of HLW glass can reduce the chemical durability of the glass, which can cause a decrease in the overall durability of the glass waste form. The accumulation of spinel solids ((Fe, Ni, Mn, Zn)(Fe, Cr) 2 O 4 ), while not detrimental to glass durability, can cause an array of processing problems inside HLW glass melters. In this review, the fundamental differences between glass and solid-crystals are explained using kinetic, thermodynamic, and viscosity arguments, and several highlights of glass-crystallization research, as it pertains to high-level waste vitrification, are described. In terms of mitigating spinel in the melter and both spinel and nepheline formation in the canister, the complexity of HLW glass and the intricate interplay between thermal, chemical, and kinetic factors further complicates this understanding. However, new experiments seeking to elucidate the contributing factors of crystal nucleation and growth in waste glass, and the compilation of data from older experiments, may go a long way towards helping to achieve higher waste loadings while developing more efficient processing strategies. Higher waste loadings and more efficient processing strategies will reduce the overall HLW Hanford Tank Waste Treatment and Immobilization Plant (WTP) vitrification facilities mission life.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystallization in High-Level Waste Glass: A Review of Glass Theory and Noteworthy Literature

There is a fundamental need to continue research aimed at understanding nepheline and spinel crystal formation in high-level waste (HLW) glass. Specifically, the formation of nepheline solids (K/NaAlSiO 4 ) during slow cooling of HLW glass can reduce the chemical durability of the glass, which can cause a decrease in the overall durability of the glass waste form. The accumulation of spinel solids ((Fe, Ni, Mn, Zn)(Fe,Cr) 2 O 4 ), while not detrimental to glass durability, can cause an array of processing problems inside of HLW glass melters. In this review, the fundamental differences between glass and solid-crystals are explained using kinetic, thermodynamic, and viscosity arguments, and several highlights of glass-crystallization research, as it pertains to high-level waste vitrification, are described. In terms of mitigating spinel in the melter and both spinel and nepheline formation in the canister, the complexity of HLW glass and the intricate interplay between thermal, chemical, and kinetic factors further complicates this understanding. However, new experiments seeking to elucidate the contributing factors of crystal nucleation and growth in waste glass, and the compilation of data from older experiments, may go a long way towards helping to achieve higher waste loadings while developing more efficient processing strategies. Higher waste loadings and more efficient processing strategies will reduce the overall HLW Hanford Tank Waste Treatment and Immobilization Plant (WTP) vitrification facilities mission life.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Predictions of mineral assemblages in planetary interiors

It is shown that mineral compatibilities in the model system CaO-MgO-Al2O3-SiO2 can be applied to deduce the mineral assemblages expected in planetary interiors and their variation with depth. In general, the available estimates of bulk composition of the terrestrial planets suggest that the terrestrial planets can be divided into two groups based on their predicted mineral assemblages. The terrestrial, Venusian, and lunar bulk compositions are expected to display the following sequence of mineral assemblages with increasing pressure: plagioclase lherzolite, spinel lherzolite, and garnet lherzolite. The sequences expected in Martian and Mercurian are different: spinel-plagioclase wehrlite, spinel lherzolite, and spinel-garnet wehrlite. These assemblages have a major influence on the compositions of liquids produced by melting of these planetary interiors, on the solidus temperatures, and thus on the nature of planetary differentiation and the types of magmas extruded at planetary surfaces.

Stolper, E.↗