Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Preacceleration in collapsing magnetic neutral sheets and anomalous abundances of solar flare particles

Levine's (1974) concept of a collapsing magnetic neutral sheet which can accelerate ambient protons to several times the mean thermal speed, provided that the collapse time scale is shorter than the proton Coulomb loss time, is applied to heavier elements in an investigation of the composition of the particles which can be accelerated by such a sheet. Tables of ionization equilibrium are combined with the thermal structure of a constant pressure loop in order to calculate phi sub x (the fraction of an element x which is accelerated) of 18 heavy elements, from carbon to nickel which satisfy a maximum-ionization criterion. Normalizing phi sub x to oxygen, it is found that relative to the composition of the ambient materials, C and N can be depleted by factors of up to 2-10, while other heavy elements, along with hydrogen, are enhanced. The numerical results obtained are qualitatively similar to anomalous abundances reported among solar flare particles.

Mullan, D. J.↗
NASA NTRS1982

Structure of current sheets in the sector boundaries - Helios 2 observations during early 1976

The orientation and structure of 14 current sheets are examined. Most of the observed sheets can be interpreted as tangential discontinuities that are, on the average, inclined at large angles with respect to the ecliptic plane, and have a typical thickness ranging from 1000 to 6000 km. Results do not show any evidence for a variation of the physical characteristics of the boundaries with time or heliocentric distances. The implications of a comparison between present results and the global configuration of the sector boundary surface are discussed, and it is concluded that the multiplicity of events within individual transition regions may suggest fluctuations of the sector boundary surface on the fine scale.

Villante, U.↗
NASA NTRS1981

Pre-acceleration in collapsing magnetic neutral sheets and composition anomalies among solar flare particles

In flares occurring in magnetic neutral sheets, the collapsing of the magnetic fields toward the neutral sheet results in their acting as mirrors in a first-order Fermi acceleration process and constitutes an intrinsic source of particle pre-acceleration. Although modest, the acceleration injects particles into the main flare acceleration with a composition which is different from that of the ambient corona. Upon calculating the fractions of 18 elements which are accelerated in the collapsing mirrors, covering the series from C to N, and then normalizing to O, peak abundances are found at Si and Fe, with local minima at N and in the S-Ca region. There is a qualitative similarity between these relative abundances and the relative enhancement factors of the elements among solar flare particles.

Mullan, D. J.↗
NASA NTRS1982

Cosmic rays near the heliospheric current sheet

A discussion of full, three-dimensional model simulations of the solar modulation of galactic cosmic rays, including drift, is presented. Particular emphasis is on the variation of the cosmic-ray intensity near the heliospheric current sheet. It is shown that the model quite naturally produces a negative gradient away from a wavy current sheet as seen by an observer on the earth. It is concluded that recent observations of Newkirk and Lockwood (1981) are not in conflict with these model results, and hence are consistent with modulation models in which drift plays an important role.

Kota, J.↗
NASA NTRS1982

Electric fields measured by ISEE-1 within and near the neutral sheet during quiet and active times

An understanding of the physical processes occurring in the magnetotail and plasmasheet during different interplanetary magnetic field orientations and differing levels of ground magnetic activity is crucial for the development of a theory of energy transfer from the solar wind to the particles which produce auroral arcs. In the present investigation, the first observations of electric fields during neutral sheet crossings are presented, taking into account the statistical correlations of the interplanetary magnetic field direction and ground activity with the character of the electric field. The electric field data used in the study were obtained from a double probe experiment on the ISEE-1 satellite. The observations suggest that turbulent electric and magnetic fields are intimately related to plasma acceleration in the neutral sheet and to the processes which create auroral particles.

Cattell, C. A.↗
NASA NTRS1983

Reinforcement for Stretch Formed Sheet Metal

Tearing of aluminum sheet metal durinng stretch forming prevented by flame spraying layer of aluminum on edges held in stretch-forming machine. Technique improves grip of machine on metal and reinforced sheet better able to with stand concentration of force in vicinity of grips.

Lea, J. B.↗
NASA NTRS1982

Ice sheet surface features in southwestern Greenland from satellite radio altimetry

Fourteen SEASAT and ten GEOS-3 satellite radar altimeter groundtracks across a 1 deg x 2.5 deg study area in southwestern Greenland have yielded 3,328 ice sheet surface elevations. The surface elevations derived from SEASAT were recalculated based on a waveform retracking algorithm. The elevations have been utilized to develop a surface profile, a three dimensional surface representation, and surface contours. Analysis of the elevations reveals the presence of surface terraces, some greater than 100 km in length; each terrace is at a discrete elevation. Renormalized SEASAT AGC values are shown to be correlated with the surface slope. The ice surface undulations caused frequent altimeter losses-of-lock. Future satellite radar altimeters could significantly contribute to ice sheet mapping in the next decade, particularly if they incorporate tracking systems with more frequent updates.

Brooks, R. L.↗
NASA NTRS1983

The inner edge of the plasma sheet and the diffuse aurora

Three dimensional measurements from the ISEE-1 low energy electron spectrometer are used to map the location of the inner edge of the plasma sheet and study the anisotropies in the electron distribution function associated with this boundary. Lower energy plasma sheet electrons have inner edges closer to the Earth than higher energies with the separations at different energies being larger near dawn and after dusk than at midnight. Lowest energy inner edges are frequently located adjacent to the plasmapause in the dawn hemisphere but are often separated from it in the dusk hemisphere by a gap of at least several Re. The energy dispersion is minimal in the afternoon quadrant where the inner edge is near the magnetopause and frequently oscillating on a time scale of minutes. The location of the inner edge is probably determined primarily by the motion of electrons in the existing electric and magnetic fields rather than by strong diffusion as has sometimes been supposed.

Fairfield, D. H.↗
NASA NTRS1983

Evaluation of the ion implantation process for production of solar cells from silicon sheet materials

The objective of this program is the investigation and evaluation of the capabilities of the ion implantation process for the production of photovoltaic cells from a variety of present-day, state-of-the-art, low-cost silicon sheet materials. Task 1 of the program concerns application of ion implantation and furnace annealing to fabrication of cells made from dendritic web silicon. Task 2 comprises the application of ion implantation and pulsed electron beam annealing (PEBA) to cells made from SEMIX, SILSO, heat-exchanger-method (HEM), edge-defined film-fed growth (EFG) and Czochralski (CZ) silicon. The goals of Task 1 comprise an investigation of implantation and anneal processes applied to dendritic web. A further goal is the evaluation of surface passivation and back surface reflector formation. In this way, processes yielding the very highest efficiency can be evaluated. Task 2 seeks to evaluate the use of PEBA for various sheet materials. A comparison of PEBA to thermal annealing will be made for a variety of ion implantation processes.

Spitzer, M. B.↗
NASA NTRS1982

Structure of the heliospheric current sheet in the early portion of sunspot cycle 21

The structure of the heliospheric current sheet on a spherical source surface of radius 2.35 solar radii has been computed via the use of a potential field model during the first year and a half after the last sunspot minimum. The solar polar magnetic field that is not fully observed in conventional magnetograph scans was included in the computation. The computed heliospheric current sheet had a quasi-stationary structure consisting of two northward and two southward maxima in latitude per solar rotation. The extent in latitude slowly increased from about 15 deg near the start of the interval to about 45 deg near the end. The magnetic field polarity (away from the sun or toward the sun) at the subterrestrial latitude on the source surface agreed with the interplanetary magnetic field polarity observed or inferred at the earth on 82 percent of the days. The interplanetary field structure observed at the earth at this time is finely tuned to the structure of low-latitude fields on the source surface.

Hoeksema, J. T.↗
NASA NTRS1982

Low cost fabrication of sheet structure using a new beta titanium alloy, Ti-15V-3Cr-3Al-3Sn

Development efforts have been undertaken to improve the processing and structural efficiencies of advanced cold-formable beta Ti alloys, using the standard, hot-formed and rivetted construction of Ti-6Al-4V sheet structures as a basis for comparison. Ti-15V-3Cr-3Al-3Sn (Ti-15-3) beta alloy is formable, brazable and weldable in the solution-treated condition, and after aging displays mechanical properties suitable for postulated service in the -65 to 600 F temperature range. A novel methodology using cold-formed Ti-15-3 stringers and Ti-6Al-4V face sheets that are joined by means of an out-of-furnace isothermal brazing process, followed by low temperature aging, can reduce production costs by as much as 28 per cent. Structural efficiency has been demonstrated in room and elevated temperature crippling tests of small skin-stringer assemblies.

Kaneko, R. S.↗
NASA NTRS1983

Surface elevation contours of Greenland and Antarctic ice sheets

Preliminary results from Seasat radar altimetry over Antarctica north of 72 deg S and Greenland south of 72 deg N are presented. Surface elevations of the ice sheets, obtained from computer retracking of the radar altimeter waveforms, are contoured at 50-m intervals for Greenland and at 100-m intervals for Antarctica. Elevation differences at orbital crossover points are analyzed to obtain a precision of 1.9 m; this figure is partly determined by radial errors of approximately 1.0 m in orbital determination and partly by noise due to ice surface irregularities. Adjustment of the radial components of the orbits to minimize the differences in elevations at crossovers over a small, relatively flat region reduces the rms difference to 0.25 m, which is indicative of the optimum precision obtainable over the ice sheets. However, the precision degrades as the slope of the surface or amplitude of the undulations increases, yielding an overall precision of + or - 1.6 m.

Zwally, H. J.↗
NASA NTRS1982

Critical technology limits to silicon material and sheet production

Earlier studies have indicated that expenditures related to the preparation of high-purity silicon and its conversion to silicon sheet represent from 40 to 52 percent of the cost of the entire panel. The present investigation is concerned with the elements which were selected for study in connection with the Flat-Plate Solar Array (FSA) Project. The first of two technologies which are being developed within the FSA Project involves the conversion of metallurgical-grade silicon through a silane purification process to silicon particles. The second is concerned with the conversion of trichlorosilane to dichlorosilane, and the subsequent production of silicon using modified rod reactors of the Siemens type. With respect to silicon sheet preparation, efforts have been focused both on the preparation of ingots, followed by wafering, and the direct crystallization of molten silicon into a ribbon or film.

Leipold, M. H.↗
NASA NTRS1983

Energetic particles in the vicinity of a possible neutral line in the plasma sheet

Combined plasma, magnetic field, and energetic particle data obtained from ISEE-1 in the geomagnetic tail during two successive energetic particle burst events are presented. The behavior of protons with energies of more than about 100 keV is very different from that of the 30-100 keV protons which represent the suprathermal tail of the plasma sheet distribution. The more energetic ions appear on a time scale of several minutes following a northward turning of the tail magnetic field. At about the same time the plasma measurements show a velocity of about 200 km/s in the tailward direction. From these results, it is argued that two successive magnetic neutral lines are created well within the plasma sheet and move close to the satellite position in the earthward direction. The extent of the neutral line is then limited to the dusk side of the tail.

Moebius, E.↗
NASA NTRS1984

The Effect of Creep on the Residual Stresses Generated During Silicon Sheet Growth

The modeling of stresses generated during the growth of thin silicon sheets at high speeds is an important part of the EFG technique since the experimental measurement of the stresses is difficult and prohibitive. The residual stresses which arise in such a growth process lead to serious problems which make thin Si ribbons unsuitable for fabrication. The constitutive behavior is unrealistic because at high temperature (close to the melting point) Si exhibits considerable creep which significantly relaxes the residual stresses. The effect of creep on the residual stresses generated during the growth of Si sheets at high speeds was addressed and the basic qualitative effect of creep are reported.

Hutchinson, J. W.↗
NASA NTRS1984

Curved cap corrugated sheet

The report describes a structure for a strong, lightweight corrugated sheet. The sheet is planar or curved and includes a plurality of corrugation segments, each segment being comprised of a generally U-shaped corrugation with a part-cylindrical crown and cap strip, and straight side walls and with secondary corrugations oriented at right angles to said side walls. The cap strip is bonded to the crown and the longitudinal edge of said cap strip extends beyond edge at the intersection between said crown and said side walls. The high strength relative to weight of the structure makes it desirable for use in aircraft or spacecraft.

Davis, R. C.↗
NASA NTRS1983

The structure of the heliospheric current sheet - 1978-1982

Continuing the study near solar minimum in 1976-1977 (Hoeksema et al., 1982), the configuration of the heliospheric magnetic field for the period 1976-1982 is calculated using a potential field model. Particular attention is given to the structure during the rising phase, maximum, and early decline of sunspot cycle 21, from 1978 to 1982. Four warps in the current sheet (the boundary between interplanetary magnetic field toward and away from the sun) are seen early in this interval; these give rise to a four-sector structure in the interplanetary magnetic field observed at earth. It is noted that the location of the current sheet changes slowly and extends to a heliographic latitude of approximately 50 deg. The strength of the polar field correction throughout this period is determined and included in the model calculations. The lower latitude magnetic fields become much stronger as the polar fields weaken and reverse polarity near maximum, decreasing the effect of the polar field correction.

Hoeksema, J. T.↗
NASA NTRS1984

The inner edge of the plasma sheet and the diffuse aurora

Three dimensional measurements from the ISEE-1 low energy electron spectrometer are used to map the location of the inner edge of the plasma sheet and study the anisotropies in the electron distribution function associated with this boundary. Lower energy plasma sheet electrons have inner edges closer to the earth than higher energies with the separations at different energies being larger near dawn and after dusk than at midnight. Lowest energy inner edges are frequently located adjacent to the plasmapause in the dawn hemisphere but are often separated from it in the dusk hemisphere by a gap of at least several Re. The energy dispersion is minimal in the afternoon quadrant where the inner edge is near the magnetopause and frequently oscillating on a time scale of minutes. The location of the inner edge is probably determined primarily by the motion of electrons in the existing electric and magnetic fields rather than by strong diffusion as has sometimes been supposed. Previously announced in STAR as N83-32595

Fairfield, D. H.↗