SEARCH · Engineering Papers
Results for “STARTING”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Number of holes contained within the Fermi surface volume in underdoped high-temperature superconductors
Here, we provide a potential solution to the longstanding problem relating Fermi surface reconstruction to the number of holes contained within the Fermi surface volume in underdoped high T c superconductors. On considering uniaxial and biaxial charge-density wave order, we show that there exists a relationship between the ordering wave vector, the hole doping, and the cross-sectional area of the reconstructed Fermi surface whose precise form depends on the volume of the starting Fermi surface. We consider a “large” starting Fermi surface comprising 1+p hole carriers, as predicted by band structure calculations, and a “small” starting Fermi surface comprising p hole carriers, as proposed in models in which the Coulomb repulsion remains the dominant energy. Using the reconstructed Fermi surface cross-sectional area obtained in quantum oscillation experiments in YBa 2 Cu 3 O 6+x and HgBa 2 CuO 4+x and the established methods for estimating the chemical hole doping, we find the ordering vectors obtained from x-ray scattering measurements to show a close correspondence with those expected for the small starting Fermi surface. We therefore show the quantum oscillation frequency and charge-density wave vectors provide accurate estimates for the number of holes contributing to the Fermi surface volume in the pseudogap regime.
The Challenges of Modeling Distributed Energy Resources (DERs) as Blackstart Resources and for Volt-VAR Optimality
Modeling, testing and instituting Distributed Energy Resources (DERs) as Blackstart Resoucrces presents several challenges due to the fundamental differences between traditional black start resources (e.g., large generators) versus DERs like solar PV systems with battery storage. This paper addresses some of these key challenges. These include intermittency of coordinating DERs to provide continuous power during a black start event, especially during extended periods of cloud cover or when battery energy storage is depleted. This paper additionally addresses the collapsing voltage and stability control challenges specific to maintaining bulk power system stability during black start synchronization These physical and engineering limitations require careful engineering design, modeling and engineering to ensure that DERs can support critical loads and substations during black start events. A variety of additional challenges also exist. Additionally, there are challenges associated with feeder location and low voltage secondary system impacts on DER functions and settings. We compare typical functions and settings for DERs for power factor control and correction. We also demonstrate how voltag control via Volta-VAR power factor correction can be done
Response of vegetation phenology to urbanization in the conterminous United States
The influence of urbanization on vegetation phenology is gaining considerable attention due to its implications for human health, cycling of carbon and other nutrients in Earth system. In this study, we examined the relationship between change in vegetation phenology and urban size, an indicator of urbanization, for the conterminous United States. We studied more than 4500 urban clusters of varying size to determine the impact of urbanization on plant phenology, with the aids of remotely sensed observations since 2003–2012. We found that phenology cycle (changes in vegetation greenness) in urban areas starts earlier (start of season, SOS) and ends later (end of season, EOS), resulting in a longer growing season length (GSL), when compared to the respective surrounding urban areas. The average difference of GSL between urban and rural areas over all vegetation types, considered in this study, is about 9 days.Also, the extended GSL in urban area is consistent among different climate zones in the United States, whereas their magnitudes are varying across regions. We found that a tenfold increase in urban size could result in an earlier SOS of about 1.3 days and a later EOS of around 2.4 days. As a result, the GSL could be extended by approximately 3.6 days with a range of 1.6–6.5 days for 25th ~ 75th quantiles, with a median value of about 2.1 days. For different vegetation types, the phenology response to urbanization, as defined by GSL, ranges from 1 to 4 days. In conclusion, the quantitative relationship between phenology and urbanization is of great use for developing improved models of vegetation phenology dynamics under future urbanization, and for developing change indicators to assess the impacts of urbanization on vegetation phenology.
Presentation of FP7 matter project: general overview
The 2010-2012 implementation plan of the European Sustainable Nuclear Industrial Initiative (ESNII), prepared in the frame of the Sustainable Nuclear Energy Technology Platform (SNETP), establishes a very tight time schedule for the start of construction of the European Gen IV prototypes; namely the construction of the LFR ETPP (European Technology Pilot Plant) MYRRHA will start in 2014 and that of the SFR Prototype ASTRID will start in 2017. The GEN IV reactors pose new challenges to the designers and scientists in terms of higher operating temperature, higher fuel burn-up, and in some cases more corrosive environment with respect to the present technologies and which impacts the materials performance. In this frame, the MATTER (Materials Testing and Rules) Project starts well targeted R and D activities to perform careful materials studies in GEN IV operational conditions and to find out criteria for the correct use of these materials in relevant reactor applications. Aim of the MATTER Project (that involved 27 partners and will end in 2015) is to complement the materials researches, in the frame of the European Energy Research Alliance (EERA) guidelines, with the implementation of pre-normative rules. The MATTER Project is divided in 3 technical Domains (called DM): DM1 - Development of test and evaluation guidelines for structural materials: to develop/establish best practice guidelines for testing and evaluation procedures, which are aimed to screen and characterize nuclear materials for innovative nuclear systems. DM2 - Pre-normative R and D for Codes and Standards: Pre-normative activities are performed, comprehensive of experiments, to revise and update the design rules (with an EU level consensus) in order to answer to some short term needs of the two projects ASTRID and MYRRHA with respect to the design and the construction of structural components. DM3 - Joint Program Scheme, implementation and Priorities: to optimise the effectiveness and efficiency of the EERA Joint Program on nuclear materials for innovative reactors and to support specific research activities related to fundamental understanding of ODS steels fabrication. ODS steels are considered candidate materials, in the medium-long term, for high fuel burn-up cladding application. After a brief presentation of DM1 and DM3, this paper mainly focuses on description of Pre-normative R and D activities for Codes and Standards (DM2). (authors)
Sci—Sat AM: Stereo — 04: Evaluation of VMAT interplay effect for lung SABR using TrueBeam 10XFFF beam
During a VMAT treatment delivery, the interplay effect between the moving target and varying machine parameters result in dose distributions that are different from those initially planned. In this work, we investigate this effect for lung SABR by using 4D dose calculation derived from the Varian TrueBeam trajectory log file. The impact of treatment start phase is also evaluated. A QUASAR™ respiratory motion phantom was scanned with motion amplitudes of 0.4, 1, 2 and 3 cm with a 4 second period. MIP and the average dataset were generated from the 4DCT. A static CT was also acquired with the tumor in its centre position. Plans were optimized with 10X FFF beam until PTV and fictitious critical structures met the dose constraints. Ten temporally interleaved plans were constructed with the temporal machine parameter information from the trajectory log file. Ten plans were calculated with isocentre shifts to simulate respiratory motion and then summed. For each motion amplitude, three separate sum plans were created with various phase shifts (no phase shift, maximum inhalation and maximum exhalation) to assess the impact of treatment start phase. For all the phase shifts investigated, the DVH for PTV demonstrated good dose coverage. However, a careful review of slice by slice plan comparison indicates dose “holes” are observed within PTV. The PTV dose difference between various treatment start phases can be as high as 19%. This assumes all treatment fractions have identical treatment start phase. Our future work includes evaluation of interplay effect for various breathing periods.
SU-E-T-562: Motion Tracking Optimization for Conformal Arc Radiotherapy Plans: A QUASAR Phantom Based Study
Purpose: This study is to use plan parameters optimization (Dose rate, collimator angle, couch angle, initial starting phase) to improve the performance of conformal arc radiotherapy plans with motion tracking by increasing the plan performance score (PPS). Methods: Two types of 3D conformal arc plans were created based on QUASAR respiratory motion phantom with spherical and cylindrical targets. Sinusoidal model was applied to the MLC leaves to generate motion tracking plans. A MATLAB program was developed to calculate PPS of each plan (ranges from 0–1) and optimize plan parameters. We first selected the dose rate for motion tracking plans and then used simulated annealing algorithm to search for the combination of the other parameters that resulted in the plan of the maximal PPS. The optimized motion tracking plan was delivered by Varian Truebeam Linac. In-room cameras and stopwatch were used for starting phase selection and synchronization between phantom motion and plan delivery. Gaf-EBT2 dosimetry films were used to measure the dose delivered to the target in QUASAR phantom. Dose profiles and Truebeam trajectory log files were used for plan delivery performance evaluation. Results: For spherical target, the maximal PPS (PPSsph) of the optimized plan was 0.79: (Dose rate: 500MU/min, Collimator: 90°, Couch: +10°, starting phase: 0.83π). For cylindrical target, the maximal PPScyl was 0.75 (Dose rate: 300MU/min, Collimator: 87°, starting phase: 0.97π) with couch at 0°. Differences of dose profiles between motion tracking plans (with the maximal and the minimal PPS) and 3D conformal plans were as follows: PPSsph=0.79: %ΔFWHM: 8.9%, %Dmax: 3.1%; PPSsph=0.52: %ΔFWHM: 10.4%, %Dmax: 6.1%. PPScyl=0.75: %ΔFWHM: 4.7%, %Dmax: 3.6%; PPScyl=0.42: %ΔFWHM: 12.5%, %Dmax: 9.6%. Conclusion: By achieving high plan performance score through parameters optimization, we can improve target dose conformity of motion tracking plan by decreasing total MLC leaf travel distance and leaf speed.
Fox Trails
1. This software utilizes python pandas to pull data from P6 databases or XER files. The software transforms the datasets into multiple main tables by joining, filtering, iteratively flattening hierarchical structured data, and pivoting datasets to give simple flat output tables. The activity table includes all of the information related to an activity including activity codes, global, EPS, and project codes, UDFs, and WBS information as separate columns. This includes the code id, code value and sequence number for all levels in hierarchical codes. The resource table is similar to the activity table and includes all of the information related to resources on activities including UPFs and resource codes. The resource time phased table takes the resource information and time phases it for the budget, forecast, late, and actual dates/units/costs that closely matches P6's user interface's values as it implements the resource curve and calendars. The wbs table contains the WBS structure broken out by levels and includes UDFs, codes, and notebook topics. The final P6 data table is the relationships table which simply contains the relationships. 2. When a user updates the tool with data (via giving it P6 project names with database username/password information or XER files) the system creates the data in #1, then creates a networkx graph with the activity data imbedded in the node data and the relationships added as edges. Each edge also has it's float calculated (working time distance between the predecessor and successor) and attached to the edge. Activities are also tagged as a potential start of a path based on their constraints, constraint dates, remaining start date, and activity status. When a user enters an activity ID into the UI, it runs a shortest path calculation on the network graph between each node tagged as potential start to the entered activity id based on the float tagged on the edge. Each path returned by the algorithm contains all of the nodes on the path in order, as well as the total float of the edges that make the path. This data is then collected and returned to the user in the form of a gantt chart with groupings for each path that includes the total float for each group. 3. Similar to 2, if the user passes through a reference dataset each activity set in the path is checked to see if it had a path in the reference dataset, if that path was the primary path between the start and end activities, and what has changed regarding logic and durations. These changes are color coded and summarized before sent to the user to be displayed by the UI for simple discovery. 4. Utilizing the data from #1, the user can submit desired grouping code(s) and filters to the system. The system will then pull the activities, resources, and relationships and create a gantt chart based on the groupings sent and filtered based on the filters sent. 5. The system will produce a gantt chart in a similar method to #4, but allows interactivity with the data. As the user interacts with the gantt chart, the software captures the changes and stores it with the user making the change so that project controls and implement those changes in P6.
Supporting data for climatic clustering and longitudinal analysis with impacts on food, bioenergy, and pandemics
This data supports the conclusions found in climatic clustering and longitudinal analysis with impacts on food, bioenergy, and pandemics. Included here are (i) the binarized geolocation vectors used for exhaustive vector comparisons, (ii) the resulting climatic networks, (iii) the results of applying Markov clustering to the climatic networks, and (iv) the results of applying Correlation-of-Correlations (cor-cor) to the climatic networks. The set of binarized geolocation vectors that are used as inputs for the Combinatorial Metrics library (CoMet) are of the form comet-UUUUUxVVVVV-XXXX-YYYY.shuffled.tped where UUUUU is the number of vectors, VVVVV is the length of each vector, XXXX is the starting year, and YYYY is the ending year. Each line corresponds to a geolocation vector of binary elements A (i.e., 0) and T (i.e., 1). The set of climatic networks that are used for downstream network analysis are of the form network-U-way-XXXX-YYYY.parsed.txt where U is the order of the comparison (2-way or 3-way), XXXX is the starting year, and YYYY is the ending year. Each line corresponds to an edge linking two geolocations (defined by latitude and longitude) with its corresponding edge weight (i.e., DUO score). The set of cluster results are of the form clusters-U-way-XXXX-YYYY-thresh-VVVV-inflation-WWW.clustered.txt where U is the order of the comparison (2-way or 3-way), XXXX is the starting year, YYYY is the ending year, VVVV is the similarity threshold, and WWW is the Markov clustering inflation rate. Each line corresponds to a single cluster and is composed of a number of corresponding geolocations (defined by latitude and longitude). The set of cor-cor results are of the form corcor-U-way-XXXX-YYYY.cumulative.txt where U is the order of the comparison (2-way or 3-way), XXXX is the starting year, and YYYY is the ending year. Each line corresponds to a single geolocation with it's corresponding cor-cor value.
Genome Majority Vote Improves Gene Predictions
Recent studies have noted extensive inconsistencies in gene start sites among orthologous genes in related microbial genomes. Here we provide the first documented evidence that imposing gene start consistency improves the accuracy of gene start-site prediction. We applied an algorithm using a genome majority vote (GMV) scheme to increase the consistency of gene starts among orthologs. We used a set of validated Escherichia coli genes as a standard to quantify accuracy. Results showed that the GMV algorithm can correct hundreds of gene prediction errors in sets of five or ten genomes while introducing few errors. Using a conservative calculation, we project that GMV would resolve many inconsistencies and errors in publicly available microbial gene maps. Our simple and logical solution provides a notable advance toward accurate gene maps.
Meteorological Conditions in Urban Sites in Knoxville, USA. 2023
This 2023 dataset, which contains four csv files, reports hourly air temperature, wind speed, solar radiation, incident short wave, reflected short wave, incident long wave, emitted long wave, net radiation, and photosynthetically active radiation (PAR) data measured in urban parks in Knoxville, Tennessee, USA. The sites include Cumberland Estates Park (CEP), Socially Equal Energy Efficient Development (SEEED), West Hills (WHP), and Victor Ashe Park (VAP). Air temperature, wind speed and direction, and solar radiation data were obtained from a METER ATMOS 41 All-in-One Weather Station (Pullman, Washington, USA). Incident and emitted radiation (shortwave and longwave) measurements were made using an Apogee (Logan, Utah, USA) net radiometer (Model SN-500-SS). The SQ-521 Full-Spectrum Quantum sensor (Apogee Instruments, Inc) recorded the PAR. The measurement data for CEP, SEEED, and VAP started on July 1, 2023, while WHP started on August 26, 2023. All measurement ended on December 31, 2023. This work is a part of a larger study which investigates the impact of soil moisture and plant evapotranspiration on ambient temperature and relative humidity in several city parks in Knoxville, Tennessee.
Heavy Oil Polymer EOR in the Challenging Alaskan Arctic - It Works!
Under co-sponsorship of the US Department of Energy and Hilcorp Alaska LLC the first ever polymer field pilot commenced on 8/28/2018 in the Schrader Bluff heavy oil reservoir at the Milne Point Field on Alaska North Slope (ANS). The primary objective of the pilot is to prove the efficacy of polymer Enhanced Oil Recovery (EOR) to unlock the vast heavy oil resources on ANS. More than two and half years after startup, the polymer injection, supporting laboratory experiments and simulation studies steadily continue. The pilot started injecting hydrolyzed polyacrylamide (HPAM), at a concentration of 1,750 ppm to achieve a target viscosity of 45 cP, into the two horizontal injectors in the flood pattern. Production is monitored in the two horizontal producers. Based on laboratory measurements of polymer viscosity at reservoir conditions, the team decided to reduce polymer concentration to 1,200 ppm since July 2020 in an effort to control injection pressure and optimize polymer utilization. Quality control (QC) on the field ensures uniform polymer solution properties. Representative rock and fluid systems and test conditions are utilized in the corefloods on polymer retention, effect of injection water salinity, polymer loading, and their combinations on oil recovery. A history matched reservoir simulation model for forecasting oil recovery was developed on the basis of all the available field data. Field concerns related to the post-polymer breakthrough impact on flow assurance is addressed via specialized laboratory tests. Notwithstanding early operational disruptions and hydration issues, continuous polymer injection in both injectors has been achieved. To date, 950,000 lbs of polymer or 2 million barrels of polymer solution, equating to 13% of total pore volume (PV), has been placed in the flood pattern, serving as an effective indicator of adequate polymer injectivity. So far, the success of polymer EOR is evident from drastically reduced water cut in the producers, an estimated incremental 1,000 bopd over waterflood, and a favorable polymer utilization of 1.7 lbs/barrel of incremental oil. Polymer breakthrough was observed 26 months after the start of polymer injection. Main observations from corefloods are unusually high polymer retention values in some cases and a positive response to low salinity water. Although the heterogeneity in the flood pattern and exceptionally low water cut pose some challenges, persistent novel and justifiable simulation approaches have resulted in a robust history matched model. Experimental results on produced fluids treatment provide operational guidance for improved oil-water separation and mitigation of heater tube fouling. The ongoing success of the pilot is a key indicator of bringing the team ever closer to meeting the project’s primary objective. The encouraging results of the pilot is one of the drivers that has provided the impetus to apply polymer EOR throughout the Milne Point Field, which would increase oil recovery and extend the economic life of the Trans Alaska Pipeline System. The scientific knowledge, including the many lessons learned from this pilot also has referential value for other potential heavy oil EOR projects throughout the world. The collected data, operational lessons learned, and the overall success of the pilot are summarized in the paper.
Volvo Penta 4.3 GL E15 Emissions and Durability Test
A new Volvo Penta carbureted 4.3 GL engine underwent emissions and dynamometer durability testing from break-in to expected end of life using an accelerated ICOMIA marine emissions cycle and E15 fuel. Only ethanol content was controlled. All aging used splash-blended E15 fuel. Exhaust emissions, exhaust gas temperature, torque, power, barometric pressure, air temperature, and fuel flow weremeasured at five intervals using site-blended E15 aging fuel and certification fuel (E0). The durability test cycle showed no noticeable impact on mechanical durability or engine power. Emissions performance degraded beyond the certification limit for this engine family, mostly occurring by 28% of expected life. Such degradation is inconsistent with prior experience. Comparisons showed that E15resulted in lower CO and HC, but increased NOX, as expected for non-feedback-controlled carbureted engines with increased oxygen in the fuel. Fuel consumption also increased with E15 compared with E0. Throughout testing, poor starting characteristics were exhibited on E15 fuel for hot re-start and cold-start. Cranking time to start and smooth idle was roughly doubled compared with typical E0operation. The carburetor was factory-set for lean operation to ensure emissions compliance. Test protocols did not include carburetor adjustment to account for increased oxygen in the E15 fuel.
Enhanced Component Performance Study: Turbine-Driven Pumps 1998–2014
This report presents an enhanced performance evaluation of turbine-driven pumps (TDPs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from fiscal year 1998 through 2014 for the component reliability as reported in the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The TDP failure modes considered are failure to start (FTS), failure to run less than or equal to one hour (FTR=1H), failure to run more than one hour (FTR>1H), and normally running systems FTS and failure to run (FTR). The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire active period. Statistically significant increasing trends were identified for TDP unavailability, for frequency of start demands for standby TDPs, and for run hours in the first hour after start. Statistically significant decreasing trends were identified for start demands for normally running TDPs, and for run hours per reactor critical year for normally running TDPs.
Enhanced Component Performance Study: Turbine-Driven Pumps 1998–2013
This report presents an enhanced performance evaluation of turbine-driven pumps (TDPs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from fiscal year 1998 through 2013 for the component reliability as reported in the Institute of Nuclear Power Operations Consolidated Events Database. The TDP failure modes considered are failure to start, failure to run less than or equal to 1 hour, failure to run more than 1 hour, and (for normally running systems) failure to run. The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire active period. Statistically significant increasing trends were identified for TDP unavailability, for frequency of start demands for standby TDPs, and for run hours in the first hour after start. Statistically significant decreasing trends were identified for start demands for normally running TDPs, and for run hours per reactor critical year for normally running TDPs.
Enhanced Component Performance Study: Motor-Driven Pumps 1998–2013
This report presents an enhanced performance evaluation of motor-driven pumps at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from fiscal year 1998 through 2013 for the component reliability as reported in the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The motor-driven pump failure modes considered for standby systems are failure to start, failure to run less than or equal to 1 hour, and failure to run more than 1 hour; for normally running systems, the failure modes considered are failure to start and failure to run. An 8 hr unreliability estimate is also calculated and trended. The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire active period. One statistically significant increasing trend was identified in the standby pump run hours per reactor year. Statistically significant decreasing trends were identified for standby systems industry-wide frequency of start demands, run hours per reactor year for runs of less than or equal to 1 hour, and frequency of fail to start events per reactor year.
MOVES Activity Updates Using Fleet DNA Data: Interim Report
The U.S. Environmental Protection Agency's Motor Vehicle Emissions Simulator (MOVES) is a publicly available tool used by researchers and policy makers to help understand motor vehicle emission sources at national, county, and project levels. However, estimates of heavy-duty activity (MOVES2014), have been identified as areas needing improvement. The start activities in MOVES2014 are calculated using a limited data set, prompting the concern that inventory values are not representative. In addition, MOVES2014 is believed to underestimate heavy-duty activity that is not captured in the current drive cycles used to represent on-network activity. For example, MOVES2014 does not account for work-day idling activity that takes place on off-network roads, such as at a distribution center while the truck is queuing or during loading and unloading. Under the guidance and expertise of the EPA, the National Renewable Energy Laboratory has leveraged its extensive Fleet DNA database of heavy-duty vehicles to reinforce the data set behind the next-generation MOVES model and enhance idle activity and start fractions using six heavy-duty vehicle classes. The data available in Fleet DNA from 420 conventional, diesel powered vehicles provided over 120,000 hours of operation. Start fraction, soak fraction, and idle fraction by hour of the day were derived for each source type, state, and vocation, and results were provided in the form of .CSV files representing MOVES table inputs. This midterm report details these results providing graphical analysis and context for the start, soak, and idle distributions.
Multitask Recommender Systems for Cancer Drug Response
The problem we are currently trying to address is that there are many types of cancer drugs and many types of cancers and there is not always experimental data for a specific cancer type and cancer drug interaction. While there is a large possible set of feasible drug and cancer combinations, testing each pair is not realistic due to the high monetary cost of cell-based assays. Thus, this leaves researchers with a difficult choice of what drugs they should test on specific cancer types. This issue is known as the cold-start problem. Our focus is on developing recommender systems capable of addressing the cold-start problem as it relates to interaction between cancer types and cancer drugs. One of the most effective ways to address the cold-start problem is through large data analysis, however due to the cost prohibitive nature of cancer research the largest available data set size is the Genomics of Drug Sensitivity in Cancer with 494,973 genomic associations. To achieve optimal model performance on the cold-start problem, it is advantageous to employ multitask algorithms that are capable of transferring information between cancer datasets. The aim of this report is to draw from adaptations and state of the art developments in both algorithms for recommender systems and multitask learning to model the interaction between cancer cell lines and cancer drugs. Cancer cell lines are defined by the US National Cancer Institute as "cancer cells that keep dividing and growing over time, under certain conditions in a laboratory". This paper will focus on evaluating the performance of Neural Collaborative Filtering and Gaussian Processes, as well as their multitask adaptations, on cancer datasets from CCLE, NCI60, GDSC and CTRP. These methods will be evaluated on model performance in regression prediction but also in interpretability.