SEARCH · Engineering Papers

Results for “SIGNALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Plume interference with space shuttle range safety signals

The computational procedure for signal propagation in the presence of an exhaust plume is presented. Comparisons with well-known analytic diffraction solutions indicate that accuracy suffers when mesh spacing is inadequate to resolve the first unobstructed Fresnel zone at the plume edge. Revisions to the procedure to improve its accuracy without requiring very large arrays are discussed. Comparisons to field measurements during a shuttle solid rocket motor (SRM) test firing suggest that the plume is sharper edged than one would expect on the basis of time averaged electron density calculations. The effects, both of revisions to the computational procedure and of allowing for a sharper plume edge, are to raise the signal level near tail aspect. The attenuation levels then predicted are still high enough to be of concern near SRM burnout for northerly launches of the space shuttle.

Boynton, F. P.↗

NASA NTRS1980

Techniques for measuring arrival times of pulsar signals 1: DSN observations from 1968 to 1980

Techniques used in the ground based observations of pulsars are described, many of them applicable in a navigation scheme. The arrival times of the pulses intercepting Earth are measured at time intervals from a few days to a few months. Low noise, wide band receivers, amplify signals intercepted by 26 m, 34, and 64 m antennas. Digital recordings of total received signal power versus time are cross correlated with the appropriate pulse template.

Downs, G. S.↗

NASA NTRS1979

Signal-to-noise ratio for acoustic detection in the deep ocean

A simple method is presented for studying the thermoacoustic wave generated by a heat pulse. The signal-to-noise ratio (S/N) is then calculated for a typical hadronic-electromagnetic cascade in the deep ocean where low frequencies are masked by surface noise. It is found that a maximum useful range of about 16 km is found for typical conditions at 5 km depth. It is shown that in order to obtain useful signals with S/N greater than 100 at distances of 1 to 16 km, the cascade energy must be 10 to the 16th to 10 to the 18th eV. Finally, attention is given to further refinements of the theory of acoustic detection which remain to be investigated.

Bowen, T.↗

NASA NTRS1980

Surface reflections of Pioneer Venus probe signals

As the four Pioneer Venus probes fell within the atmosphere toward the surface of Venus, each of them transmitted a radio signal directly to earth. Because of the relatively broad antenna beamwidth of these small probes, some of the transmitted power went down to the surface of Venus. This paper reports the discovery that the radio signals scattered off the surface are not only detectable but that their characteristics can be determined with a surprising degree of certainty. From these characteristics one can determine parameters of the Venusian atmospheric winds and of the surface that promise to be useful. Most of the scattered energy is that which originally radiated from the probes in a near-horizontal direction; the downward-directed radiation is detectable but much weaker. Refraction in the atmosphere of Venus clearly plays a significant role in establishing both the strength of scatter and its Doppler shift.

Croft, T. A.↗

NASA NTRS1980

Simulation of transducer-couplant effects on broadband ultrasonic signals

The increasing use of broadband, pulse-echo ultrasonics in nondestructive evaluation of flaws and material properties has generated a need for improved understanding of the way signals are modified by coupled and bonded thin-layer interfaces associated with transducers. This understanding is most important when using frequency spectrum analyses for characterizing material properties. In this type of application, signals emanating from material specimens can be strongly influenced by couplant and bond-layers in the acoustic path. Computer synthesized waveforms were used to simulate a range of interface conditions encountered in ultrasonic transducer systems operating in the 20to 80-MHz regime. The adverse effects of thin-layer multiple reflections associated with various acoustic impedance conditions are demonstrated. The information presented is relevant to ultrasonic transducer design, specimen preparation, and couplant selection.

Vary, A.↗

NASA NTRS1980

Prototype real-time baseband signal combiner

The design and performance of a prototype real-time baseband signal combiner, used to enhance the received Voyager 2 spacecraft signals during the Jupiter flyby, is described. Hardware delay paths, operating programs, and firmware are discussed.

Howard, L. D.↗

NASA NTRS1980

Role of the middle ear muscle apparatus in mechanisms of speech signal discrimination

A method of impedance reflexometry was used to examine 101 students with hearing impairment in order to clarify the interrelation between speech discrimination and the state of the middle ear muscles. Ability to discriminate speech signals depends to some extent on the functional state of intraaural muscles. Speech discrimination was greatly impaired in the absence of stapedial muscle acoustic reflex, in the presence of low thresholds of stimulation and in very small values of reflex amplitude increase. Discrimination was not impeded in positive AR, high values of relative thresholds and normal increase of reflex amplitude in response to speech signals with augmenting intensity.

Moroz, B. S.↗

NASA NTRS1981

On the correction for quantization effects in signal-to-noise ratio estimation

In sampled data digital telemetry systems the signal to noise ratio (SNR) is typically derived as a function of the moments of the digitized input stream (e.g., the receiver output). This analog to digital conversion process is itself an additional noise source known as the quantization noise. Thus a digitally measured SNR will only approximately represent the SNR of the analog input signal. A procedure (Sheppard's corrections) for correcting moments of any order for this quantization effect is presented.

Howard, L.↗

NASA NTRS1981

Design considerations for a LORAN-C timing receiver in a hostile signal to noise environment

The environment in which a LORAN-C Timing Receiver may function effectively depends to a large extent on the techniques utilized to insure that interfering signals within the pass band of the unit are neutralized. The baseline performance manually operated timing receivers is discussed and the basic design considerations and necessary parameters for an automatic unit utilizing today's technology are established. Actual performance data is presented comparing the results obtained from a present generation timing receiver against a new generation microprocessor controlled automatic acquisition receiver. The achievements possible in a wide range of signal to noise situations are demonstrated.

Porter, J. W.↗

NASA NTRS1981

Experimental results on tracking performance of the MTDD Costas loop with UQPSK signal

The carrier tracking performance of the breadboard Costas Loop of the Multimegabit Telemetry Demodulator Detector System was tested with unbalanced quadriphase shift keying (UQPSK) signals. An S-band UQPSK modulator was built for the tests. The experimental results are very close to the theoretical rms phase error calculations. The test and analysis show that the rms phase error for UQPSK signals is less than 5 deg at the design point if the I-to-Q channel power ratio is larger than 6 dB.

Park, Y. H.↗

NASA NTRS1980

Digital signal processing in microwave radiometers

A microprocessor based digital signal processing unit has been proposed to replace analog sections of a microwave radiometer. A brief introduction to the radiometer system involved and a description of problems encountered in the use of digital techniques in radiometer design are discussed. An analysis of the digital signal processor as part of the radiometer is then presented.

Lawrence, R. W.↗

NASA NTRS1981

Fiber optics transmission of LV signal

The first use of a long optical fiber for transmitting megahertz frequencies in a laser velocimeter (LV) receiver system is reported. The fiber comprises a 600-micron diameter fused silica core, a silicon polymer cladding and a plastic jacket. The fiber numerical aperture is 0.22, corresponding to a maximum entrance half-angle of 0.22 rad. The 10-m length used results in a 5.6% attenuation loss. The fiber is found to transmit an 80-MHz signal with excellent resolution. It is established that an LV receiver using fiber optics sends a clean signal in electronically noisy and high-pressure environments and allows velocity measurements in places too small for a photomultiplier tube.

Young, A. D.↗

NASA NTRS1981

Possibility of a new approach to processing space pulse radio signals

A approach to the processing of space pulse radio signals, which makes it possible to achieve a high level of time resolution is proposed. The approach is based on the utilization of the Fourier transform of a radio pulse envelope in the interstellar medium effect. The conditions of applicability of the proposed method and the requirements for recording equipment are substantiated. Also indicated is the possibility of obtaining superresolution with the utilization of the given method of signal processing.

Bocharov, A. A.↗

NASA NTRS1982

Research study: Severe storms Doppler lidar signal processing

Four tasks related to the signal processing aspects of the severe-storms Doppler lidar program are discussed. The development of algorithms for windfield retrieval from Doppler lidar measurements are discussed. Signal processor installation on a CV-990 aircraft is discussed.

Lee, R. W.↗

NASA NTRS1982

Discriminator aided phase lock acquisition for suppressed carrier signals

A discriminator aided technique for acquisition of phase lock to a suppressed carrier signal utilizes a Costas loop which is initially operated open loop and control voltage for its VCXO is derived from a phase detector that compares the VCXO to a reference frequency thus establishing coarse frequency resolution with the received signal. Then the Costas loop is closed with the low-pass filter of the channel having a bandwidth much greater (by a factor of about 10) than in the I channel so that a frequency discriminator effect results to aid carrier resolution. Finally, after carrier acquisition, the Q-channel filter of the Costas loop is switched to a bandwidth substantially equal to that of the I-channel for carrier tracking.

Carson, L. M.↗

NASA NTRS1981

Near optimum delay-line detection filters for serial detection of MSK signals

A method for designing transversal delay-line filter approximations to the matched filter for the serial detection of minimum-shift keyed (MSK) modulated signals is given. Two configurations are characterized in terms of signal-to-noise ratio degradation at a bit error rate (BER) of 10 to the -6th. One is shown to depart less than 0.3 dB from the ideal matched filter performance when its parameter values are optimized. A lumped-element equivalent is also given and shown to provide a degradation of less than 0.4 dB at a BER of 10 to the -6th

Ziemer, R. E.↗

NASA NTRS1982

DE-1 observations of VLF transmitter signals and wave-particle interactions in the magnetosphere

A broadband VLF receiver on the DE-1 satellite measures signals injected into the magnetosphere by ground-based transmitters. VLF emissions triggered by these signals indicate that the waves interact strongly with trapped energetic particles in the magnetosphere. The propagation paths from the source to the satellite are deduced on the basis of the group time delay and Doppler shift. Although there are many different paths, emissions are triggered by the later-arriving pulses that have traversed the geomagnetic equator. First satellite-based observations of emission triggering by high-power communications transmitters and their possible implications are discussed.

Inan, U. S.↗

NASA NTRS1983

Efficient Distribution of Frequency-Standard Signals

Low power system distributes precise frequency standard signal to network of remote stations. Reference frequency at phase angle modulates transmitter at master transmitter/receiver circuit and recovers at remote circuit. Two circuits continuously transmit on microwave or optical signals 100 MHz apart to effect synchronization of reference frequency and phase.

Meyer, R. F.↗