Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Route optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Compositional and temporal division of labor modulates mixed sugar fermentation by an engineered yeast consortium

Abstract Synthetic microbial communities have emerged as an attractive route for chemical bioprocessing. They are argued to be superior to single strains through microbial division of labor (DOL), but the exact mechanism by which DOL confers advantages remains unclear. Here, we utilize a synthetic Saccharomyces cerevisiae consortium along with mathematical modeling to achieve tunable mixed sugar fermentation to overcome the limitations of single-strain fermentation. The consortium involves two strains with each specializing in glucose or xylose utilization for ethanol production. By controlling initial community composition, DOL allows fine tuning of fermentation dynamics and product generation. By altering inoculation delay, DOL provides additional programmability to parallelly regulate fermentation characteristics and product yield. Mathematical models capture observed experimental findings and further offer guidance for subsequent fermentation optimization. This study demonstrates the functional potential of DOL in bioprocessing and provides insight into the rational design of engineered ecosystems for various applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Metal-like Charge Transport in PEDOT(OH) Films by Post-processing Side Chain Removal from a Soluble Precursor Polymer

Herein, a route to produce highly electrically conductive doped hydroxymethyl functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films, termed PEDOT(OH) with metal-like charge transport properties using a fully solution processable precursor polymer is reported. Further, this is achieved via an ester-functionalized PEDOT derivative [PEDOT(EHE)] that is soluble in a range of solvents with excellent film-forming ability. PEDOT(EHE) demonstrates moderate electrical conductivities of 20–60 S cm -1 and hopping-like (i.e., thermally activated) transport when doped with ferric tosylate (FeTos 3 ). Upon basic hydrolysis of PEDOT(EHE) films, the electrically insulative side chains are cleaved and washed from the polymer film, leaving a densified film of PEDOT(OH). These films, when optimally doped, reach electrical conductivities of ≈1200 S cm -1 and demonstrate metal-like (i.e., thermally deactivated and band-like) transport properties and high stability at comparable doping levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In-Situ Atomic-Scale Revelation of Amorphous Metallic Iron Formation during Hydrogen-Driven Reduction of Iron Oxides

The transition to hydrogen as a green reductant in metal production is critical for decarbonizing the metallurgical industry, yet atomic-scale mechanisms governing reduction pathways and phase evolution remain unresolved. Using in-situ environmental transmission electron microscopy, we identify a hidden pathway that reveals dynamic formation of amorphous metallic iron (Fe) during the hydrogen-driven reduction of ferrous oxides of Fe 3 O 4 and FeO. Real-time imaging uncovers three coexisting transformation routes: (i) Fe 3 O 4 → FeO, (ii) Fe 3 O 4 → amorphous Fe, and (iii) FeO → amorphous Fe. The resulting amorphous Fe exhibits fluid-like mobility, enabling its rapid aggregation and crystallization into core-shell nanostructures, with a crystalline core enveloped by an amorphous shell. Complementary ab initio molecular dynamics simulations trace the amorphous Fe formation to interfacial strain at the metal/oxide interfaces, where large lattice mismatches destabilize the metal lattice during initial metallization. This interplay between thermodynamics and kinetics governs phase evolution: thermodynamics favors a self-limiting amorphous Fe overlayer, while rapid oxide reduction kinetics drives amorphous overgrowth. Our findings demonstrate that amorphous intermediates bypass rate-limiting crystalline steps, providing mechanistic insights to optimize H 2 -based processes for sustainable steelmaking. In conclusion, these insights bridge the gap between macroscopic process engineering and atomic-scale dynamics, with broader implications for catalysis and nanostructured material synthesis, where oxide reduction pathways critically shape functional phases and microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Theoretical study of the decomposition pathways and products of C5- perfluorinated ketone (C5 PFK)

Due to the high global warming potential (GWP) and increasing environmental concerns, efforts on searching the alternative gases to SF{sub 6}, which is predominantly used as insulating and interrupting medium in high-voltage equipment, have become a hot topic in recent decades. Overcoming the drawbacks of the existing candidate gases, C5- perfluorinated ketone (C5 PFK) was reported as a promising gas with remarkable insulation capacity and the low GWP of approximately 1. Experimental measurements of the dielectric strength of this novel gas and its mixtures have been carried out, but the chemical decomposition pathways and products of C5 PFK during breakdown are still unknown, which are the essential factors in evaluating the electric strength of this gas in high-voltage equipment. Therefore, this paper is devoted to exploring all the possible decomposition pathways and species of C5 PFK by density functional theory (DFT). The structural optimizations, vibrational frequency calculations and energy calculations of the species involved in a considered pathway were carried out with DFT-(U)B3LYP/6-311G(d,p) method. Detailed potential energy surface was then investigated thoroughly by the same method. Lastly, six decomposition pathways of C5 PFK decomposition involving fission reactions and the reactions with a transition states were obtained. Important intermediate products were also determined. Among all the pathways studied, the favorable decomposition reactions of C5 PFK were found, involving C-C bond ruptures producing Ia and Ib in pathway I, followed by subsequent C-C bond ruptures and internal F atom transfers in the decomposition of Ia and Ib presented in pathways II + III and IV + V, respectively. Possible routes were pointed out in pathway III and lead to the decomposition of IIa, which is the main intermediate product found in pathway II of Ia decomposition. We also investigated the decomposition of Ib, which can undergo unimolecular reactions to give the formation of IV a, IV b and products of CF{sub 3} + CF-CF{sub 3} in pathway IV. Although IV a is dominant to a lesser extent due to its relative high energy barrier, its complicated decomposition pathway V was also studied and CF{sub 3}, C = CF{sub 2} as well as C-CF{sub 3} species were found as the ultimate products. To complete the decomposition of C5 PFK, pathway V I of Ic decomposition was fully explored and the final products were obtained. Therefore, the integrate decomposition scheme of C5 PFK was proposed, which contains six pathways and forty-eight species (including all the reactants, products and transition states). This work is hopeful to lay a theoretical basis for the insulating properties of C5 PFK.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Controlled Dielectric Breakdown to Form Pinhole Passivating Contacts

This contribution explores an alternate route to forming pinhole-based poly-Si/dielectric/c-Si passivating contacts. The method utilizes controlled dielectric breakdown or electroforming to produce nanoscale pinholes in a thick (non-tunnelling) dielectric which, when annealed, allows dopant atoms to pass from doped poly-Si through the pinholes and into the c-Si wafer, forming conductive pathways. We show that the pinholes lose passivation after electroforming but can be repassivated with a forming gas anneal. N-type contacts show contact resistivities of ~20 mOhm-cm2, but p-type contacts are ~100 mOhm-cm2. Devices show a distinct kink in the J-V curve indicative of a barrier to transport. The method can be expanded to optimized dielectric passivation stacks (not just thin, single layers) and can be formed in parallel over the faces of the wafer in selected areas (pinholes only under the grid lines).

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗
DOE OSTI2017

Characterization and photocatalytic activity of Bi{sub 3}TaO{sub 7} prepared by hydrothermal method

In this paper, Bi{sub 3}TaO{sub 7} nanoparticles with visible light response have been prepared via a facile hydrothermal route and solid-state reaction. The photocatalytic performance of as-prepared samples was evaluated by the degradation of Tetracycline hydrochloride (TC). It was observed that the sample obtained by hydrothermal method showed an enhanced photocatalytic activity in contrast to the sample prepared by solid-state method. This could be ascribed to the efficient separation of photogenerated electrons and holes in the sample prepared via hydrothermal process, which is certified by the photoluminescence spectroscopy (PL) and transient photocurrent analysis. Moreover, the result of nitrogen adsorption-desorption isotherm indicated the existence of mesoporous structure in as-prepared sample with hydrothermal process, and specific surface area is significantly higher than the sample obtained by solid-state method. The optimal conditions involved in the photocatalytic reaction, such as TC concentration, catalyst concentration and pH value were investigated. - Graphical abstract: The preparation process of Bi{sub 3}TaO{sub 7} photocatalyst by hydrothermal method. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Implementation and performance of SIBYLS: a dual endstation small-angle X-ray scattering and macromolecular crystallography beamline at the Advanced Light Source

The SIBYLS beamline (12.3.1) of the Advanced Light Source at Lawrence Berkeley National Laboratory, supported by the US Department of Energy and the National Institutes of Health, is optimized for both small-angle X-ray scattering (SAXS) and macromolecular crystallography (MX), making it unique among the world's mostly SAXS or MX dedicated beamlines. Since SIBYLS was commissioned, assessments of the limitations and advantages of a combined SAXS and MX beamline have suggested new strategies for integration and optimal data collection methods and have led to additional hardware and software enhancements. Features described include a dual mode monochromator [containing both Si(111) crystals and Mo/B 4 C multilayer elements], rapid beamline optics conversion between SAXS and MX modes, active beam stabilization, sample-loading robotics, and mail-in and remote data collection. These features allow users to gain valuable insights from both dynamic solution scattering and high-resolution atomic diffraction experiments performed at a single synchrotron beamline. Key practical issues considered for data collection and analysis include radiation damage, structural ensembles, alternative conformers and flexibility. SIBYLS develops and applies efficient combined MX and SAXS methods that deliver high-impact results by providing robust cost-effective routes to connect structures to biology and by performing experiments that aid beamline designs for next generation light sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Air gasification of biogas-derived digestate in a downdraft fixed bed gasifier

Highlights: • Air gasification of digestate with high ash content was studied in detail. • Compared to original biomass, less tar was observed in digestate gasification process. • Improved molar ratio of H{sub 2}/CO potential for chemical synthesis was gained at 800 °C. • The by-products (biochar and ash) can be land applied as fertilizer. - Abstract: Digestate is a byproduct from biomass anaerobic digestion process. Gasification of dried digestate to produce gasesous product might be a promising route. In this work, air gasification of digestate with high ash content was performed in a downdraft fixed bed gasifier at temperature varying from 600 °C to 800 °C and air equivalence ratio (ER) ranging from 0.25 to 0.30. The ash melting properties were firstly detected by the Intelligent Ash Melting Point Test, and the by-products (biochar and ash) were analyzed. The results showed that no ash slagging was observed and therefore it is feasible to operate digestate gasification under 800 °C and ER ranging from 0.25 to 0.30. High temperature favored gas production, 800 °C is proposed for digestate gasification in the present study. ER with a medium value improved gas quality and cold gas efficiency (CGE), and the optimal LHV of 4.78 MJ/N m{sup 3} and CGE of 67.01% were obtained with ER of 0.28. High ER favored the increase of gas yield and decrease of tar concentration, and the optimal gas yield of 2.15 N m{sup 3}/kg and tar concentration of 1.61 g/N m{sup 3} were achieved with ER of 0.30. Improved molar ratio of H{sub 2}/CO varying from 1.03 to 1.08 was obtained at 800 °C, indicating gaseous product has the potential for chemical synthesis processes (1 < H{sub 2}/CO < 2). The byproducts biochar and ash could be applied on land as fertilizer.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Elliptic Aperture CCT Coils for HTS Dipole Magnets

High-temperature REBa$_{2}$Cu$_{3}$O$_{7-x}$ (REBCO) superconductors are a route to increase the field of accelerator magnets beyond the 15-16T practical limit of Nb$_{3}$Sn. REBCO cabled in a CORC geometry is a promising fit for this application, enabling the design of low inductance magnets with conductor transposition. However, the use of CORC in coils with the tight conductor bending radii typical of accelerator magnets remains a key challenge, with on-going research both on the conductor development and coil design fronts seeking to address this issue. Here, in this work we explore the tradeoffs between circular and elliptic aperture canted-cosine-theta (CCT) coils when the conductor minimum bending radius is a key consideration, concluding that aperture ellipticity is an important free parameter in the optimization of magnetically efficient CORC dipole magnets. In particular, we show that elliptic bore designs enable a regime of smaller aperture HTS coils, an important result for LTS-HTS hybrid magnets and more generally for accelerator applications benefiting from non-circular magnet apertures. To this end we present an elliptic aperture dipole design optimized for hybrid testing within the US Magnet Development Program (US-MDP) and share 77 K test results of a prototype coil which provides first experimental confirmation of the advantages.

Brouwer, L. [Lawrence Berkeley National Laboratory↗
DOE OSTI2013

Ionic Liquids: Breakthrough Absorption Technology for Post-Combustion CO 2 Capture

This is the final report for DE-FC26-07NT43091 Ionic Liquids: Breakthrough Absorption Technology for Post-Combustion CO 2 Capture. A detailed summary is provided of the ionic liquid (IL) discovery process, synthesis and testing results, process / systems modeling, lab-scale operational testing, corrosion testing and commercialization possibilities. The work resulted in the discovery of a new class of ionic liquids (ILs) that efficiently react with CO 2 in a 1:1 stoichiometry with no water present and no increase in viscosity. The enthalpy of reaction was tuned to optimize process economics. The IL was found to have excellent corrosion behavior with and without CO 2 present. In lab-scale tests, the IL was able to effectively remove CO 2 from a simulated flue gas stream, although mass transfer was slower than with aqueous monoethanolamine (MEA) due to higher viscosities. The non-volatile nature of the solvent and its high thermal stability, however, make it an intriguing option. An independent systems analysis indicates that the economics of using the best IL discovered to date (NDIL0157), are at least comparable to and potentially slightly better than - the Fluor Econamine FG PlusTM process (DOE Case 12). Further work should be directed at improving mass transfer / lowering viscosity and developing commercial synthesis routes to make these ILs at scale in an inexpensive manner. Demonstration of the process at larger scales is also warranted, as is the exploration of other process configurations that leverage the anhydrous nature of the solvent and its extremely low volatility.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Novel pathways for fuels and lubricants from biomass optimized using life-cycle greenhouse gas assessment

Decarbonizing the transportation sector is critical to achieving global climate change mitigation. Although biofuels will play an important role in conventional gasoline and diesel applications, bioderived solutions are particularly important in jet fuels and lubricants, for which no other viable renewable alternatives exist. Producing compounds for jet fuel and lubricant base oil applications often requires upgrading fermentation products, such as alcohols and ketones, to reach the appropriate molecular-weight range. Ketones possess both electrophilic and nucleophilic functionality, which allows them to be used as building blocks similar to alkenes and aromatics in a petroleum refining complex. Here, we develop a method for selectively upgrading biomass-derived alkyl methyl ketones with >95% yields into trimer condensates, which can then be hydrodeoxygenated in near-quantitative yields to give a new class of cycloalkane compounds. The basic chemistry developed here can be tailored for aviation fuels as well as lubricants by changing the production strategy. We demonstrate that a sugarcane biorefinery could use natural synergies between various routes to produce a mixture of lubricant base oils and jet fuels that achieve net life-cycle greenhouse gas savings of up to 80%.

09 BIOMASS FUELS↗
DOE OSTI2020

Efficient Control of Atom Arrangement in Ternary Metal Chalcogenide Nanoparticles Using Precursor Oxidation State

Controlling both the concentration and the distribution of elements in a given material is often crucial to extracting and optimizing synergistic properties of the various constituents. An interesting class of such multielement materials is metal chalcogenide nanoparticles, which exhibit a wide range of composition-dependent optoelectronic properties including both bandgap-mediated processes and localized surface plasmon resonance properties, each of which is useful in applications ranging from energy conversion to sensing. Because metal chalcogenide nanoparticles can support several different metal elements in a variety of chalcogen lattices, this material class has particularly benefited from the ability to control both atom concentration and atom arrangement to tailor final particle properties. The primary method to access complex, multimetallic chalcogenide particles is via a postsynthetic cation exchange strategy. One-pot syntheses have been less explored to access these complex particles, although this route is desirable for economy and scalability. In this work, we compare the composition and morphology outcomes from cation exchange and one-pot preparation approaches using a Cu/Ag/Se system, which is already known to exhibit both binary and ternary metal chalcogenide phases. We show that at similar concentrations of the two metal cations, initial reaction conditions for the one-pot method yield multicomponent nanoparticles, whereas cation exchange yields homogeneous ternary metal chalcogenide structures. We then show that by tuning the precursor oxidation state for the one-pot method, this approach can be used to access homogeneous ternary metal chalcogenide particles that are similar in atom arrangement to the particles obtained using cation exchange. Taken together, our results demonstrate reliable synthetic methods that yield a variety of controlled compositions and composition morphologies in the Cu/Ag/Se system. Importantly, we demonstrate that this entire collection of architectures can all be accessed via a one-pot method simply by modifying metal precursor chemistry. The mechanistic insights gained and the resulting streamlined syntheses outlined indicate pathways to easily scaled, highly tailorable syntheses for rapid translation into downstream technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rapid discovery and evolution of nanosensors containing fluorogenic amino acids

Binding-activated optical sensors are powerful tools for imaging, diagnostics, and biomolecular sensing. However, biosensor discovery is slow and requires tedious steps in rational design, screening, and characterization. Here we report on a platform that streamlines biosensor discovery and unlocks directed nanosensor evolution through genetically encodable fluorogenic amino acids (FgAAs). Building on the classical knowledge-based semisynthetic approach, we engineer ~15 kDa nanosensors that recognize specific proteins, peptides, and small molecules with up to 100-fold fluorescence increases and subsecond kinetics, allowing real-time and wash-free target sensing and live-cell bioimaging. An optimized genetic code expansion chemistry with FgAAs further enables rapid (~3 h) ribosomal nanosensor discovery via the cell-free translation of hundreds of candidates in parallel and directed nanosensor evolution with improved variant-specific sensitivities (up to ~250-fold) for SARS-CoV-2 antigens. Altogether, this platform could accelerate the discovery of fluorogenic nanosensors and pave the way to modify proteins with other non-standard functionalities for diverse applications.

Biosensors↗
DOE OSTI2015

Gold-doped graphene: A highly stable and active electrocatalysts for the oxygen reduction reaction

In addressing the growing need of renewable and sustainable energy resources, hydrogen-fuel-cells stand as one of the most promising routes to transform the current energy paradigm into one that integrally fulfills environmental sustainability. Nevertheless, accomplishing this technology at a large scale demands to surpass the efficiency and enhance the cost-effectiveness of platinum-based cathodes, which catalyze the oxygen reduction reaction (ORR). In this work, our first-principles calculations show that Au atoms incorporated into graphene di-vacancies form a highly stable and cost-effective electrocatalyst that is, at the same time, as or more (dependently of the dopant concentration) active toward ORR than the best-known Pt-based electrocatalysts. We reveal that partial passivation of defected-graphene by gold atoms reduces the reactivity of C dangling bonds and increases that of Au, thus optimizing them for catalyzing the ORR and yielding a system of high thermodynamic and electrochemical stabilities. We also demonstrate that the linear relation among the binding energies of the reaction intermediates assumed in computational high-throughput material screening does not hold, at least for this non-purely transition-metal material. We expect Au-doped graphene to finally overcome the cathode-related challenge hindering the realization of hydrogen-fuel cells as the leading means of powering transportation and portable devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Xanthos-Lake Model Source Code

This repository contains the source code for Xanthos-Lake, a lake-modeling extension of the Xanthos framework that introduces a coupled lake component comprising the Xanthos-Lake Snow and Ice Model (xLSIM) and the Xanthos-Lake Water Balance Model (xLWBM). xLSIM is a basin-aware machine-learning model for lake snow, ice, and thermal conditions. It predicts monthly lake ice thickness, snow depth, snow-cover fraction, mixing-layer temperature, and lake ice fraction from meteorological forcing and lake surface-area information. It uses sequence-based deep-learning architectures, including Transformer and hybrid Long Short-Term Memory–Transformer (LSTM–Transformer) models, together with seasonal encoding, multi-lake learning, physical masking, and basin-level cryospheric and non-cryospheric classification. The training workflow uses Ray for scalable execution and includes optional Ray Tune hyperparameter optimization. Model predictions, observations, diagnostics, and feature-importance outputs are written in NetCDF. xLWBM is the water-balance component of the new lake framework. It simulates monthly lake storage, surface area, evaporation, inflow, outflow, and lake–groundwater exchange. It combines physical water-balance equations with calibrated bathymetric relationships, weir-based outlet flow, modified Penman open-water evaporation, groundwater head relaxation, Penman–Monteith snow and ice sublimation, and snow, ice, and thermal conditions supplied by xLSIM. The model calibrates lake parameters against satellite-derived surface-area data, using evaporation-based calibration where surface-area data are unavailable, and supports small, medium, and large lake classes. For large lakes, xLWBM is integrated with the managed-routing workflow so that lake storage and outflow interact directly with downstream river routing and reservoir operations. Together, xLSIM and xLWBM provide Xanthos with a coupled lake-modeling capability. xLSIM supplies the snow, ice, and thermal conditions that affect lake evaporation and snow- and ice-related water exchanges, while xLWBM translates those conditions into dynamic lake storage, surface area, evaporation, and discharge. In return, xLWBM supplies evolving lake surface area to xLSIM. This coupling enables Xanthos to represent lakes as active hydrologic components within basin-scale water-availability and routing simulations.

Machine Learning↗
DOE OSTI2018

Tribological behavior prediction of friction materials for ultrasonic motors using Monte Carlo‐based artificial neural network

ABSTRACT In this article, the relationship of complexity, diversity, and uncertainty between components and tribological properties of friction materials based on a Monte Carlo‐based artificial neural network (MC‐ANN) model was predicted precisely. Meanwhile, the grey relational analysis was applied to figure out weight of factors, optimize formulation design, and calculate nonlinear dependency of ingredients. The accuracy of model was studied by comparing experimental and simulated values on the basis of statistical methods (root‐mean‐squared error). It was found that the model exhibited an excellent performance in predicting and fitting effect. Moreover, comprehensive analysis of weight indicated that nano‐SiO 2 and mica exerted a significant role in improving the friction stability and wear resistance. According to different contents of each ingredient, the corresponding friction coefficient and specific wear rate could be obtained by virtue of a well‐trained MC‐ANN model without experiments, which saved a lot of time and money. It can be expected that the results of this work will extend the current research and pave a route for further in‐depth studies of friction materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47157.

Li, Song↗
DOE OSTI2026

Comparing Synthetic Routes and Thermal Characteristics of Alternate APO Variants

Low density, high-strength, temperature-resistant foams see widespread application in the aerospace and weapons fields due to their excellent qualities as structural supports. In these demanding environments, the most common formulation is a three-phase syntactic foam containing APOCure-601, BMI, and carbon or glass microballoons. Of these, APOCure-601 and BMI form the polymer resin amino-poly(oxadiazole) bismaleimide (APO-BMI), also known as Legacy APO or S-1,2-Ethyl-APO. In manufacturing this foam, the selective laser sintering (SLS) additive manufacturing technique is quickly gaining prominence, over more traditional injection molding since SLS allows for 3D printing of materials and reduces overall cost and waste production. That said, SLS also requires a narrow window between the melt and cure temperatures for a successful print. SLS printing of APO-BMI is therefore difficult since the compound possesses a broad window between its melting and curing temperatures, and also requires several post-cure steps or complete polymerization. This work explores synthesis optimization and thermal characteristics for variant Apo-BMI structures by observing the effect that alternative heteroatoms in the APO linkages, geometries 0f the BMI groups, and bridge structure identities impart on the resultant material. Synthetic methods for these altered structures were established in batch, with some others further converted to continuous flow chemistry, a method that produces materials in a continuous stream and is highly reproducible and readily scaled. Additionally, each structural change significantly altered the melt and cure properties for each APO variant, which is advantageous for SLS manufacturing.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

A chemical bath deposition route to facet-controlled Ag{sub 3}PO{sub 4} thin films with improved visible light photocatalytic activity

A facile, economic, and reproducible chemical bath deposition (CBD) method is developed for the fabrication of facet-controlled Ag{sub 3}PO{sub 4} thin films with enhanced visible light photocatalytic activity. The fine-control of bath temperature, precursor, complexing agent, substrate, and solution pH is fairly crucial in preparing the facet-selective thin film of Ag{sub 3}PO{sub 4} nanocrystal. The change of precursor from silver nitrate to silver acetate makes possible the tailoring of the crystal shape of Ag{sub 3}PO{sub 4} from cube to rhombic dodecahedron and also the bandgap tuning of the deposited films. The control of [Ag{sup +}]/[phosphate] ratio enables to maximize the loading amount of Ag{sub 3}PO{sub 4} crystals per the unit area of the deposited film. All the fabricated Ag{sub 3}PO{sub 4} thin films show high photocatalytic activity for visible light-induced degradation of organic molecules, which can be optimized by tailoring the crystal shape of the deposited crystals. This CBD method is also useful in preparing the facet-controlled hybrid film of Ag{sub 3}PO{sub 4}–ZnO photocatalyst. The present study clearly demonstrates the usefulness of the present CBD method for fabricating facet-controlled thin films of metal oxosalt and its nanohybrid. - Highlights: • The crystal facet of Ag{sub 3}PO{sub 4} films can be tuned by chemical bath deposition. • The crystal shape of Ag{sub 3}PO{sub 4} is tailorable from cube to rhombic dodecahedron. • Facet-tuned Ag{sub 3}PO{sub 4} film shows enhanced visible light photocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗