Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Random fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

What can solve the strong CP problem?

Three possible strategies have been advocated to solve the strong CP problem. The first is the axion, a dynamical mechanism that relaxes any initial value of the CP violating angle $\overline{θ}$ to zero. The second is the imposition of new symmetries that are believed to set $\overline{θ}$ to zero in the UV. The third is the acceptance of the fine tuning of parameters. We argue that the latter two solutions do not solve the strong CP problem. The θ term of QCD is not a parameter — it does not exist in the Hamiltonian. Rather, it is a property of the quantum state that our universe finds itself in, arising from the fact that there are CP violating states of a CP preserving Hamiltonian. It is not eliminated by imposing parity as a symmetry since the underlying theory is already parity symmetric and that does not preclude the existence of CP violating states. Moreover, since the value of θ realized in our universe is a consequence of measurement, it is inherently random and cannot be fine tuned by choice of parameters. Rather any fine tuning would require a tuning between parameters in the theory and the random outcome of measurement. Our results considerably strengthen the case for the existence of the axion and axion dark matter. The confusion around θ arises from the fact that unlike classical mechanics, the Hamiltonian and Lagrangian are not equivalent in quantum mechanics. The Hamiltonian defines the differential time evolution, whereas the Lagrangian is a solution to this evolution. Consequently, initial conditions could in principle appear in the Lagrangian but not in the Hamiltonian. This results in aspects of the initial condition such as θ misleadingly appearing in the Lagrangian as parameters. We comment on the similarity between the θ vacua and the violations of the constraint equations of classical gauge theories in quantum mechanics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The Fermilab Holometer: A program to measure Planck scale indeterminacy

We propose an experiment at Fermilab to study a conjectured effect called "holographic noise" that may arise from new Planck scale physics: the measured positions of bodies may wander randomly from ideal geodesics of classical relativity, in measurement-dependent directions, by about a Planck length per Planck time. The experiment will search for this holographic jitter in the relation of mass-energy and space-time by looking for correlated phase noise between two neighboring 40 meter interferometers. The goal of the experiment is to provide convincing evidence for or against the hypothesis that relative transverse positions of bodies display this particular new kind of quantum noise, whose power spectrum is independent of frequency and has a spectral density determined only by the Planck time. A positive result of the experiment would be a major step forward in understanding the emergence of space time and mass-energy from a unified theory of spacetime and quantum mechanics. A negative result will impact the macroscopic interpretation of unified theories.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

V‐Groove Si Nanopatterning for the Direct Epitaxy of Orientation‐Patterned III–V Nonlinear Optical Crystals

Orientation‐patterned (OP) III–V semiconductors—used as quasi‐phase‐matched crystals for nonlinear optics applications—are typically epitaxially grown on expensive III–V substrates using a complex process requiring three separate epitaxy steps. In this work, a method is demonstrated for growing orientation‐patterned III–V crystals on Si substrates through V‐groove nanopatterning and a single epitaxial growth. V‐groove Si allows for suppression of random antiphase domain formation that is typical of III–V growth on (001)‐oriented Si through the use of (111)‐faceted trenches patterned on (001)‐oriented Si substrates. By alternating the directions of the V‐groove trenches between [110] and [10], antiphase boundaries can be selectively induced at the boundaries between the two directions of trenches due to the difference in symmetry between the III–V material and Si. This approach allows for a greatly simplified process for growing OP‐III‐Vs and more broadly is a new, robust approach for precisely patterning antiphase boundaries of arbitrary shape and length scales down to 50 nm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Behavior and mechanisms of Doppler wind lidar error in varying stability regimes

Abstract. Wind lidars are widespread and important tools in atmospheric observations. An intrinsic part of lidar measurement error is due to atmospheric variability in the remote-sensing scan volume. This study describes and quantifies the distribution of measurement error due to turbulence in varying atmospheric stability. While the lidar error model is general, we demonstrate the approach using large ensembles of virtual WindCube V2 lidar performing a profiling Doppler-beam-swinging scan in quasi-stationary large-eddy simulations (LESs) of convective and stable boundary layers. Error trends vary with the stability regime, time averaging of results, and observation height. A systematic analysis of the observation error explains dominant mechanisms and supports the findings of the empirical results. Treating the error under a random variable framework allows for informed predictions about the effect of different configurations or conditions on lidar performance. Convective conditions are most prone to large errors (up to 1.5 m s−1 in 1 Hz wind speed in strong convection), driven by the large vertical velocity variances in convective conditions and the high elevation angle of the scanning beams (62∘). Range-gate weighting induces a negative bias into the horizontal wind speeds near the surface shear layer (−0.2 m s−1 in the stable test case). Errors in the horizontal wind speed and direction computed from the wind components are sensitive to the background wind speed but have negligible dependence on the relative orientation of the instrument. Especially during low winds and in the presence of large errors in the horizontal velocity estimates, the reported wind speed is subject to a systematic positive bias (up to 0.4 m s−1 in 1 Hz measurements in strong convection). Vector time-averaged measurements can improve the behavior of the error distributions (reducing the 10 min wind speed error standard deviation to <0.3 m s−1 and the bias to <0.1 m s−1 in strong convection) with a predictable effectiveness related to the number of decorrelated samples in the time window. Hybrid schemes weighting the 10 min scalar- and vector-averaged lidar measurements are shown to be effective at reducing the wind speed biases compared to cup measurements in most of the simulated conditions, with time averages longer than 10 min recommended for best use in some unstable conditions. The approach in decomposing the error mechanisms with the help of the LES flow field could be extended to more complex measurement scenarios and scans.

17 WIND ENERGY↗
DOE OSTI2025

Denoising Autoencoder for Reconstructing Sensor Observation Data and Predicting Evapotranspiration: Noisy and Missing Values Repair and Uncertainty Quantification

Abstract Machine learning (ML) methods applied in scientific research often deal with interrelated features in high‐dimensional data. Reducing data noise and redundancy is needed to increase prediction accuracy and efficiency especially when dealing with data from field sensors. We explored an unsupervised learning method, the denoising autoencoder (DAE), to extract the underlying data structure from noisy raw data in the context of predicting hydrologic quantities from multiple field sensors. These sensors have intrinsic instrumental noise and occasional malfunctions that cause missing values. Our DAE neural network reconstructed meteorological sensor data containing noise and missing values to predict evapotranspiration in a mountainous watershed. The DAE reconstructed the sensor variables with a mean coefficient of determination value of 0.77 across 15 dimensions representing individual sensors. It reduced variance and bias uncertainties compared to a classical autoencoder model. The reconstruction quality varied across dimensions depending on their cross‐correlation and alignment with the underlying data structure. Uncertainties arising from the model structure were overall higher than those resulting from data corruption. We attached the DAE structure to a downstream ET‐prediction neural network in three formats and achieved reasonably accurate ET predictions . The use of the DAE notably reduced variance uncertainty in ET prediction. However, excessive variance reduction may be accompanied by an increase in bias due to the intrinsic bias‐variance tradeoff. Our method of evaluating and reducing uncertainties in aggregated data from different sources can be used to improve predictive models, process understanding, and uncertainty quantification for better water resource management. Plain Language Summary We present a machine learning method, namely the denoising autoencoder, which reduces the effects of data noise and missing values typically present in scientific data sets collected through sensor measurements. This method selects the most relevant information from noisy raw data collected by the instruments and fills in missing values. To demonstrate the effectiveness of our method, we applied it to predict evapotranspiration, a hydrologic variable that represents the water moved from the land surface to the atmosphere through a combination of evaporation and plant water use (transpiration). We also used a random sampling technique (the Monte Carlo method) to compare the uncertainty in the predictions when using the raw and noisy data versus the reconstructed data. The denoising process produced more accurate predictions of evapotranspiration with less uncertainty. Improved predictions of evapotranspiration can lead to a better understanding and accounting of water budgets. This ML approach is broadly suitable for a wide variety of applications that involve noisy sensor data with missing values. Key Points We used a denoising autoencoder (DAE) neural network to reduce noise in meteorological and soil sensor observations by on average We used Monte Carlo sampling to estimate the bias and variance of all model outputs, including uncertainty sources from data and the model We attached the DAE component to a downstream neural network to predict ET with the variance reduced by , compared to that without the DAE

denoising autoencoder↗
DOE OSTI2022

Spin liquid to spin glass crossover in the random quantum Heisenberg magnet

We study quantum SU($M$) spins with all-to-all and random Heisenberg exchange interactions of root-mean-square strength $J$. The $M \rightarrow \infty$ model has a spin liquid ground state with the spinons obeying the equations of the Sachdev-Ye-Kitaev (SYK) model. Numerical studies of the SU(2) model with $S=1/2$ spins show spin glass order in the ground state, but also display SYK spin liquid behavior in the intermediate frequency spin spectrum. We employ a $1/M$ expansion to describe the crossover from fractionalized fermionic spinons to a confining spin glass state with weak spin glass order $q_{EA}$. The SYK spin liquid behavior persists down to a frequency $\omega_\ast \sim J q_{EA}$, and for $\omega < \omega_\ast$, the spectral density is linear in $\omega$, thus quenching the extensive zero temperature entropy of the spin liquid. Furthermore, the linear $\omega$ spectrum is qualitatively similar to that obtained earlier using bosonic spinons for large $q_{EA}$. We argue that the extensive SYK spin liquid entropy is transformed as $T \rightarrow 0$ to an extensive complexity of the spin glass state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Spoofing Cross-Entropy Measure in Boson Sampling

Cross-entropy (XE) measure is a widely used benchmark to demonstrate quantum computational advantage from sampling problems, such as random circuit sampling using superconducting qubits and boson sampling (BS). We present a heuristic classical algorithm that attains a better XE than the current BS experiments in a verifiable regime and is likely to attain a better XE score than the near-future BS experiments in a reasonable running time. The key idea behind the algorithm is that there exist distributions that correlate with the ideal BS probability distribution and that can be efficiently computed. The correlation and the computability of the distribution enable us to postselect heavy outcomes of the ideal probability distribution without computing the ideal probability, which essentially leads to a large XE. Our method scores a better XE than the recent Gaussian BS experiments when implemented at intermediate, verifiable system sizes. Much like current state-of-the-art experiments, we cannot verify that our spoofer works for quantum-advantage-size systems. However, we demonstrate that our approach works for much larger system sizes in fermion sampling, where we can efficiently compute output probabilities. Finally, we provide analytic evidence that the classical algorithm is likely to spoof noisy BS efficiently.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Electrical Analysis of Pulsed Laser Annealed Poly-Si:Ga/SiOx Passivating Contacts

High-efficiency single crystalline silicon (c-Si) solar cells require precise control of dopant diffusion profiles and highly active doping concentrations through thermal annealing. Conventional furnace annealing has been successfully employed for dopant diffusion in aluminum back-surface field (Al-BSF), passivated emitter and rear contact (PERC), and Topcon cells. However, furnace annealing limits some next-generation polycrystalline silicon (poly-Si) on SiOx passivating contacts. This limitation largely affects p-type passivating contacts by not being able to: 1) control the dopant diffusion accurately to prevent B segregation at the SiOx and c-Si interface; and 2) provide highly activated doping concentrations for low contact resistivity. In this contribution, we use a nanosecond excimer laser to examine the passivation quality and electrical performance of both B- and Ga-doped poly-Si/SiOx passivating contacts. The core of this method is to take advantage of the nonequilibrium nature of the anneal through rapid melting and recrystallizing the poly-Si in a short timescale and to achieve doping concentrations above the solid solubility limit. Simulations were performed on polished surfaces to visualize the doping diffusion profiles under different laser conditions, and secondary ion mass spectrometry (SIMS) was used to verify the experimental diffusion profiles post pulsed laser melting (PLM). The results show the dopant diffusion profiles can be tuned precisely through PLM. The electrical analysis using VdP-Hall measurements reveals that the active doping concentration reached 10^21 cm-3 for B and ~2×10^21 cm-3 for Ga in poly-Si, far exceeding their solid solubility limit in Si, with a nearly 100% dopant activation achieved for B, and 20% for Ga. This highly activated dopant profile results in a low contact resistivity of <15 mO·cm^2 for B-doped contacts and <40 mO·cm^2 for Ga-doped contacts. We demonstrate that the passivation quality of the laser annealed contacts shows a linear dependency with the laser energy density and the number of pulses. PLM was also performed on random pyramid textured samples, and we found that preferential melting exists for the tips of pyramids, which can be pursued further for selective pinhole opening. Additionally, we perform thermal stability tests of these hyperdoped passivating contacts and show that under certain laser conditions, the B-doped samples exhibit good thermal stability with near full activation for temperatures up to 800°C. Lastly, we transfer this technique to a larger area by overlapping laser spots and show uniform passivation quality and electrical performance. We are currently implementing this PLM annealed p-type passivating contacts into double-side back-junction poly-Si/SiOx passivating contact devices. Our results show that PLM can not only enable the next generation of high-efficiency c-Si photovoltaics technology but can also benefit the c-Si integrated circuit industry through hyperdoping other semiconductors with atoms that may otherwise have a low solubility.

doping diffusion profile↗
DOE OSTI2025

Broadband phonon production from axion absorption

We show that axion dark matter in the range meV ≲ m a ≲ 100 meV can incoherently excite phonons in crystal targets with unpolarised nuclear spins. This can occur through its coupling to nuclear spins and/or through its induced time-dependent electric dipole moment in nuclei. Due to the random orientation of the nuclear spins, translation symmetry is broken in the phonon effective theory, allowing axion absorption to create phonons with unrestricted momentum. The absorption rate is therefore proportional to the phonon density of states, which generically has support across a wide range of energies, allowing for a broadband detection scheme. We calculate the absorption rate for solid H 2 , D 2 , Al 2 O 3 , GaAs, H 2 O, D 2 O, Be and Li 2 O, and find that materials containing light, non-zero spin nuclei are the most promising. The predicted rates for the QCD axion are of the order of a few events / 10 kg-year exposure, setting an ambitious target for the required exposure and background suppression.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Evolution of the age-included nearest pair distribution in disperse multiphase flows

The age of the nearest particle pair is introduced as the difference between the current time and the most recent time when the nearest particle pair was formed. The evolution equation for the age-included nearest pair distribution function is derived. With the assumption of random destruction of the nearest particle pairs, the evolution equation predicts the exponential probability distribution of the ages of the nearest particle pairs. Particle-resolved numerical simulations with moving particles are performed to verify this prediction. The equation is then used to derive the evolution equation for the particle–fluid–particle (PFP) stress, which is known to be related to hyperbolicity of the two-fluid equations. It is found that the relaxation time of the age probability distribution is also the relaxation time for the PFP stress. Guided by the closure terms in the PFP stress evolution equation, we study kinematics of the nearest particle pairs in the particle-resolved simulations for flows caused by sedimentation of the particles with initially isotropic and homogeneous particle distributions. At the steady states, the particle Reynolds numbers are around 20. Anisotropy and inhomogeneity of particle distributions are seen to develop in these flows. The mean distances to the nearest particles and evolution of the distribution of the Voronoi cell volumes are studied. We also found the PFP stress is closely related to the changes in these inter-particle scale quantities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Simulations of classical three-body thermalization in one dimension

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of pointlike particles, typically the dominant process for reaching thermal equilibrium in higher-dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential V ij ∝ 1/|x i –x j | n or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature T toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low-density limit. For the inverse power-law potential, the rate of thermalization is proportional to ρ 2 ⁢T$\frac{1}{2}$ – $\frac{1}{n}$, where ρ is the number density. Furthermore, the corresponding proportionality constant decreases with increasing n.

1-dimensional systems↗
DOE OSTI2020

Particle Track Classification Using Quantum Associative Memory (Final Technical Report)

This project explored the use of quantum-assisted algorithms for pattern matching in sub-atomic physics experiments. Pattern matching algorithms are commonly employed to prune data of random noise and to help discriminate between signals generated by particle tracks of interest and signals generated by background events. The quantum-assisted algorithms explored in this project were based on an Ising formulation of quantum associative model (QAMM) recall and quantum content-addressable memory (QCAM) recall. The recall is performed by comparing a probe pattern with those stored in a library of patterns encoded in the QAMM/QCAM model. The classification accuracy of QAMM and QCAM recall was determined as a function of detector resolution, noise, and efficiency and pattern density, where pattern density is defined as the ratio of the number of reference signal patterns encoded in the library to each pattern’s length. We found that QAMM achieved high classification accuracy when applied to datasets with low pattern density. QCAM achieved high classification accuracy for datasets with high pattern density and was found to be more robust to detector noise. The project methodology and results are described in detail in our arXiv preprint (arXiv:2011.11848) . This project was conducted by scientists at the Johns Hopkins University Applied Physics Laboratory and Oak Ridge National Laboratory from August 2018 to August 2020 and was supported by DOE grant DE-SC0019497.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Effect of Heat Treatment on Microstructure and Mechanical Property of 316L Stainless Steel Produced by Laser Powder Bed Fusion

The advanced non-light water reactor designs (Gen IV reactors), including molten salt/ very high temperature/ sodium-cooled and lead-cooled fast reactors, typically operate at higher temperatures and more extreme radiation conditions than light water reactors. An intrinsic part of the deployment and progress of Gen IV reactor designs is selecting the most suitable structural material for a specific application. Additive manufacturing (AM), a fairly new process of making physical, three-dimensional objects from a computer design file, is going to completely change the way of design, build and certify nuclear systems. It offers a range of opportunities to produce complex geometries from existing materials, offers new routes for processing of previously difficult to process materials, allows for design of new high-performance materials, and finally facilitates hybridization of dissimilar materials. This emerging technology has successfully produced cars, wind turbine blade molds and even live cells. It could also open up big opportunities for the nuclear industry to quickly deploy technologies at a fraction of the cost. So far, AM techniques have been preliminarily applied in the field of nuclear reactors, including the classical parts such as the pressure vessel of a small reactor with 508-III steel, the bottom nozzle of a fuel assembly with 304L steel, the fuel cladding with zirconium alloy and the integrated impeller of a pump and the multi-channel valve body with 316L steel [6,7]. The AM applications for operating nuclear reactors started in auxiliary plant components and have slowly migrated to metallic reactors and core components, but many of these are not safety critical components. Although many parts used for nuclear reactors have been fabricated by AM techniques, practical applications in engineering are still a long way off due to the uncertainty factors focused on the processing, material properties, analysis methods and application standards, which feeds the safety and life-cycle of the nuclear reactor. Due to rapid, repeated heating and cooling during production, a high dislocation density was present in the AM material. This microstructure feature is unstable at elevated temperature while high temperature is one of the typical operation environments for nuclear reactors. Thus, it is important to understand the thermal effect on the microstructure of AM material. The objectives of this study are to investigate the effect of heat treatment on the microstructure and mechanical properties of 316L stainless steel produced by laser powder bed fusion additive manufacturing, and to determine an appropriate heat treatment practice that will be applied to the lightweight AM lattice-structured material with the same chemistry. The heat treatment study consisted of annealing the samples at a temperature range of 800 to 1200 oC with a 50 oC increment for different times (1-24 hours), followed by vacuum or air cooling. Microstructural characterization was carried out by Scanning Electron Microscope (SEM). Grain size and crystallographic orientation were investigated by Electron Backscatter Diffraction (EBSD). Vickers hardness tests with a 0.5 kg load were employed to determine the hardness of samples after different heat treatments. After heat treatment, the random crystallographic orientation was preserved, and the volume fraction of high-angle grain boundaries (grain boundary misorientation =15 oC) remained the same. The dislocation density decreased with annealing temperature due to recovery. The fine subgrain structures in the as-printed specimen were quite stable up to 1200 oC. Minimal recrystallization was observed up to 1200 oC. Recrystallization initiated only after 8.5 hours at 1200 oC. The SEM images did not show obvious dependence of microstructure on cooling rate. The hardness of the specimens decreased with increasing annealing temperature as a result of the decrease in dislocation density. It is interesting to note that the AM material showed very similar hardness to the wrought material when annealing at similar temperature, although the microstructures are very different. Annealing at 1050 oC for 1 hour followed by air cooling was selected as the heat treatment procedure for the lattice designed lightweight AM 316L material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Holographic measurement and bulk teleportation

Holography has taught us that spacetime is emergent and its properties depend on the entanglement structure of the dual theory. In this paper, we describe how changes in the entanglement due to a local projective measurement (LPM) on a subregion A of the boundary theory modify the bulk dual spacetime. We find that LPMs destroy portions of the bulk geometry, yielding post-measurement bulk spacetimes dual to the complementary unmeasured region A c that are cut off by end-of-the-world branes. Using a bulk calculation in AdS 3 and tensor network models of holography (in particular, the HaPPY code and random tensor networks), we show that the portions of the bulk geometry that are preserved after the measurement depend on the size of A and the state we project onto. The post-measurement bulk dual to A c includes regions that were originally part of the entanglement wedge of A prior to measurement. This suggests that LPMs performed on a boundary subregion A teleport part of the bulk information originally encoded in A into the complementary region A c . In semiclassical holography an arbitrary amount of bulk information can be teleported in this way, while in tensor network models the teleported information is upper-bounded by the amount of entanglement shared between A and A c due to finite-N effects. When A is the union of two disjoint subregions, the measurement triggers an entangled/disentangled phase transition between the remaining two unmeasured subregions, corresponding to a connected/disconnected phase transition in the bulk description. Our results shed new light on the effects of measurement on the entanglement structure of holographic theories and give insight on how bulk information can be manipulated from the boundary theory. They could also represent a first step towards a holographic description of measurement-induced phase transitions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Improved high-throughput screening technique to rapidly isolate Chlamydomonas transformants expressing recombinant proteins

Abstract The single-celled eukaryotic green alga Chlamydomonas reinhardtii has long been a model system for developing genetic tools for algae, and is also considered a potential platform for the production of high-value recombinant proteins. Identifying transformants with high levels of recombinant protein expression has been a challenge in this organism, as random integration of transgenes into the nuclear genome leads to low frequency of cell lines with high gene expression. Here, we describe the design of an optimized vector for the expression of recombinant proteins in Chlamydomonas , that when transformed and screened using a dual antibiotic selection, followed by screening using fluorescence activated cell sorting (FACS), permits rapid identification and isolation of microalgal transformants with high expression of a recombinant protein. This process greatly reduces the time required for the screening process, and can produce large populations of recombinant algae transformants with between 60 and 100% of cells producing the recombinant protein of interest, in as little as 3 weeks, that can then be used for whole population sequencing or individual clone analysis. Utilizing this new vector and high-throughput screening (HTS) process resulted in an order of magnitude improvement over existing methods, which normally produced under 1% of algae transformants expressing the protein of interest. This process can be applied to other algal strains and recombinant proteins to enhance screening efficiency, thereby speeding up the discovery and development of algal-derived recombinant protein products. Key points • A protein expression vector using double-antibiotic resistance genes was designed • Double antibiotic selection causes fewer colonies with more positive for phenotype • Coupling the new vector with FACS improves microalgal screening efficiency > 60%

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Particle-number distribution in large fluctuations at the tip of branching random walks

Here, we investigate properties of the particle distribution near the tip of one-dimensional branching random walks at large times t , focusing on unusual realizations in which the rightmost lead particle is very far ahead of its expected position, but still within a distance smaller than the diffusion radius ~$\sqrt{t}$. Our approach consists in a study of the generating function $G_{Δx}(λ) = Σ_n$ ${λ^n}p_n(Δx)$ for the probabilities $p_n(Δx)$ of observing $\textit{n}$ particles in an interval of given size $Δ\textit{x}$ from the lead particle to its left, fixing the position of the latter. This generating function can be expressed with the help of functions solving the Fisher-Kolmogorov-Petrovsky-Piscounov (FKPP) equation with suitable initial conditions. In the infinite-time and large-$Δ\textit{x}$ limits, we find that the mean number of particles in the interval grows exponentially with $Δ\textit{x}$, and that the generating function obeys a nontrivial scaling law, depending on $Δ\textit{x}$ and λ through the combined variable $[Δx — f(λ)]^3 / Δx^2$, where $\textit{f}$(λ) ≡ – ln(1 – λ) – ln [– ln(1 – λ)]. From this property, one may conjecture that the growth of the typical particle number with the size of the interval is slower than exponential, but, surprisingly enough, only by a subleading factor at large Δ$\textit{x}$. The scaling we argue is consistent with results from a numerical integration of the FKPP equation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

In Vivo Entombment of Bacteria and Fungi during Calcium Oxalate, Brushite, and Struvite Urolithiasis

Human kidney stones form via repeated events of mineral precipitation, partial dissolution, and reprecipitation, which are directly analogous to similar processes in other natural and manmade environments, where resident microbiomes strongly influence biomineralization. High-resolution microscopy and high-fidelity metagenomic (microscopy-to-omics) analyses, applicable to all forms of biomineralization, have been applied to assemble definitive evidence of in vivo microbiome entombment during urolithiasis. Stone fragments were collected from a randomly chosen cohort of 20 patients using standard percutaneous nephrolithotomy (PCNL). Fourier transform infrared (FTIR) spectroscopy indicated that 18 of these patients were calcium oxalate (CaOx) stone formers, whereas one patient formed each formed brushite and struvite stones. This apportionment is consistent with global stone mineralogy distributions. Stone fragments from seven of these 20 patients (five CaOx, one brushite, and one struvite) were thin sectioned and analyzed using brightfield (BF), polarization (POL), confocal, super-resolution autofluorescence (SRAF), and Raman techniques. DNA from remaining fragments, grouped according to each of the 20 patients, were analyzed with amplicon sequencing of 16S rRNA gene sequences (V1–V3, V3–V5) and internal transcribed spacer (ITS1, ITS2) regions. Bulk-entombed DNA was sequenced from stone fragments in 11 of the 18 patients who formed CaOx stones, and the patients who formed brushite and struvite stones. These analyses confirmed the presence of an entombed low-diversity community of bacteria and fungi, including Actinobacteria, Bacteroidetes, Firmicutes, Proteobacteria, and Aspergillus niger. Bacterial cells approximately 1 μm in diameter were also optically observed to be entombed and well preserved in amorphous hydroxyapatite spherules and fans of needle-like crystals of brushite and struvite. In conclusion, these results indicate a microbiome is entombed during in vivo CaOx stone formation. Similar processes are implied for brushite and struvite stones. This evidence lays the groundwork for future in vitro and in vivo experimentation to determine how the microbiome may actively and/or passively influence kidney stone biomineralization.

59 BASIC BIOLOGICAL SCIENCES↗