Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RELEASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Release-rate calorimetry of multilayered materials for aircraft seats

Multilayered samples of contemporary and improved fire-resistant aircraft seat materials (foam cushion, decorative fabric, slip sheet, fire-blocking layer, and cushion-reinforcement layer) were evaluated for their rates of heat release and smoke generation. Top layers (decorative fabric, slip sheet, fire blocking, and cushion reinforcement) with glass-fiber block cushion were evaluated to determine which materials, based on their minimum contributions to the total heat release of the multilayered assembly, may be added or deleted. Top layers exhibiting desirable burning profiles were combined with foam cushion materials. The smoke and heat-release rate of multilayered seat materials were then measured at heat fluxes of 1.5 and 3.5 W/sq cm. Choices of contact and silicon adhesives for bonding multilayered assemblies were based on flammability, burn and smoke generation, animal toxicity tests, and thermal gravimetric analysis.

Fewell, L. L.↗

Environmental analysis of the chemical release module

The environmental analysis of the Chemical Release Module (a free flying spacecraft deployed from the space shuttle to perform chemical release experiments) is reviewed. Considerations of possible effects of the injectants on human health, ionosphere, weather, ground based optical astronomical observations, and satellite operations are included. It is concluded that no deleterious environmental effects of widespread or long lasting nature are anticipated from chemical releases in the upper atmosphere of the type indicated for the program.

Heppner, J. P.↗

Chemical releases

A Chemical Release Module to be carried into orbit by the shuttle is described. The module would release chemicals from orbiting satellites in order understand processes within the Earth's magnetosphere, atmosphere and ionosphere. A large number of potential experiments are identified, ranging from introducing traceable material into the solar wind in order to study its transport to and within the magnetosphere, to injecting material into the outer magnetosphere to simulate the precipitation of trapped charged particles, to the release of material at lower altitudes to create waves both mechanical and electromagnetic.

Heppner, J. P.↗

The evolution of a release-engage mechanism for use on the orbiter

The Release-Engage Mechanism (REM) is designed to secure a deployable payload in the orbiter during launch and to enable the payload to be released, deployed, and reattached for re-entry. This paper presents the following: (1) the initial design concepts of the Release-Engage Mechanism; (2) the problems encountered during assembly, (3) the abnormalities that occurred during vibration testing, (4) the incompatibility of the Remote Manipulator System and REM operation, and (5) the resulting modifications to the REM that assured its successful performance on two Shuttle flights.

Calvert, J.↗

Modeling of interaction of artificially released lithium with the earth's bow shock

A numerical simulation is used to predict the interaction between the earth's bow shock and lithium to be released in the solar wind during the Active Magnetospheric Particle Tracer Explorers program in 1984. Based on the simulation results for a release near the subsolar point, it is recommended that a favorable release condition is when the garden-hose angle of the interplanetary magnetic field exceeds about 60 to 70 deg so that the transmission of Li(+) ions through the bow shock is optimized. The model also predicts that the Li(+) is 'shock-drift' accelerated at the bow shock. The energy gain of Li(+) ions is on the average less for the transmitted particles (below a factor of about 4) than for the reflected particles (below a factor of about 16).

Decker, R. B.↗

Translational and extensional energy release rates (the J- and M-integrals) for a crack layer in thermoelasticity

A number of papers have been presented on the evaluation of energy release rate for thermoelasticity and corresponding J integral. Two main approaches were developed to treat energy release rate in elasticity. The first is based on direct calculation of the potential energy rate with respect to crack length. The second makes use of Lagrangian formalism. The translational and expansional energy release rates in thermoelasticity are studied by employing the formalism of irreversible thermodynamics and the Crack Layer Approach.

Chudnovsky, A.↗

Direct numerical simulations of a reacting mixing layer with chemical heat release

In order to study the coupling between chemical heat release and fluid dynamics, direct numerical simulations of a chemically reacting mixing layer with heat release are performed. The fully compressible equations as well as an approximate set of equations that is asymptotically valid for low-Mach-number flows are treated. These latter equations have the computational advantage that high-frequency acoustic waves have been filtered out, allowing much larger time steps to be taken in the numerical solution procedure. A detailed derivation of these equations along with an outline of the numerical solution technique is given. Simulation results indicate that the rate of chemical product formed, the thickness of the mixing layer, and the amount of mass entrained into the layer all decrease with increasing rates of heat release.

Mcmurtry, P. A.↗

The impact of latent heat release on synoptic-scale vertical motions and the development of an extratropical cyclone system

This study investigates the influence of stable and convective latent heat release on synoptic-scale vertical motions and the corresponding evolution of an extratropical cyclone during a 48 h period of strong development. The cyclone's early evolution was dominated by dry dynamical processes. By midway through the period, however, forcing by latent heat release accounted for over 50 percent of the upward vertical motions, with the convective component dominating. The cyclone's development was most intense during the second 24 h, despite a decrease in latent heat release. During the latter period, the reduced direct latent heat influence may have been augmented by an indirect influence, in which pre-existing dry dynamical forcing was enhanced by diabatic intensification of vorticity and thermal gradients.

Smith, P. J.↗

A measurement of the efficiency of lithium vapor production in high altitude releases

The masses of lithium vapor produced in two sounding rocket chemical releases were determined by comparing ground measurements of the irradiance and the brightness distribution of the sunlit releases with the results from a model calculation. The yields of the two releases, which had different compositions, were found to be approximately 5 and 15 percent of the available lithium.

Ledley, B. G.↗

AMPTE lithium tracer releases in the solar wind - Observations inside the magnetosphere

The transfer of mass from the solar wind to the magnetosphere and its transport and energization within the magnetosphere are investigated. Lithium atoms released on September 11 and 20, 1984 are utilized as the tracers in this study. The components and capabilities of the Charge Composition Explorer, which are to measure magnetospheric ion composition, are described. The data collected is analyzed and it is observed that Li ions did not enter the magnetosphere in sufficient quantities to be distinguished from the background particles. The modeling of solar wind and magnetosheath transport of Li ions is examined; more than 20 percent of the Li released on September 11, and 50 percent of the Li released on September 20 are mapped to the area around the stagnation point of the magnetopause.

Krimigis, S. M.↗

Simple formulas for strain-energy release rates with higher order and singular finite elements

A general finite element procedure for obtaining strain-energy release rates for crack growth in isotropic materials is presented. The procedure is applicable to two-dimensional finite element analyses and uses the virtual crack-closure method. The procedure was applied to non-singular 4-noded (linear), 8-noded (parabolic), and 12-noded (cubic) elements and to quarter-point and cubic singularity elements. Simple formulas for strain-energy release rates were obtained with this procedure for both non-singular and singularity elements. The formulas were evaluated by applying them to two mode I and two mixed mode problems. Comparisons with results from the literature for these problems showed that the formulas give accurate strain-energy release rates.

Raju, I. S.↗

Convergence of strain energy release rate components for edge-delaminated composite laminates

Strain energy release rates for edge delaminated composite laminates were obtained using quasi 3 dimensional finite element analysis. The problem of edge delamination at the -35/90 interfaces of an 8-ply composite laminate subjected to uniform axial strain was studied. The individual components of the strain energy release rates did not show convergence as the delamination tip elements were made smaller. In contrast, the total strain energy release rate converged and remained unchanged as the delamination tip elements were made smaller and agreed with that calculated using a classical laminated plate theory. The studies of the near field solutions for a delamination at an interface between two dissimilar isotropic or orthotropic plates showed that the imaginary part of the singularity is the cause of the nonconvergent behavior of the individual components. To evaluate the accuracy of the results, an 8-ply laminate with the delamination modeled in a thin resin layer, that exists between the -35 and 90 plies, was analyzed. Because the delamination exists in a homogeneous isotropic material, the oscillatory component of the singularity vanishes.

Raju, I. S.↗

Mechanisms by which heat release affects the flow field in a chemically reacting, turbulent mixing layer

The mechanisms by which heat release affects the fluid dynamics in a turbulent reacting mixing layer are studied by direct numerical simulation. In agreement with previous laboratory experiments, the heat release is observed to lower the rate at which the mixing layer grows and to reduce the rate at which chemical products are formed. The baroclinic torque and thermal expansion in the mixing layer are shown to produce changes in the flame vortex structure that act to produce more diffuse vortices than in the constant density case, resulting in lower rotation rates of fluid elements. Previously unexplained anomalies observed in the mean velocity profiles of reacting jets and mixing layers are shown to result from vorticity generation by baroclinic torques. The density reductions also lower the generation rates of turbulent kinetic energy and the turbulent shear stresses, resulting in less turbulent mixing of fluid elements. Calculations of the energy in the various wave numbers show that the heat release has a stabilizing effect on the growth rates of individual modes. A linear stability analysis of a simlified model problem confirms this, showing that low density fluid in the mixing region will result in a shift of the frequency of the unstable modes to lower wave numbers (longer wavelengths). The growth rates of the unstable modes decrease, contributing to the slower growth of the mixing layer.

Riley, J. J.↗

An analysis of the shocklike electrostatic noise observed during AMPTE solar wind ion releases

Electrostatic waves produced by the interaction of the ion cloud with the solar wind are analyzed in order to explain the shocklike noise detected by the Ion Release Module instruments during the Active Magnetospheric Particle Tracer Explorers solar wind ion releases. The results indicate that the shocklike noise can be generated by two instabilities, an ion-electron instability that occurs for waves propagating parallel to the solar wind velocity and an ion-ion instability that occurs for waves propagating at a large angle to the solar wind direction. Both instabilities give high growth rates for both the lithium and barium releases. The calculated results agree with the observed ones in all main features. In the earlier stage of the ion cloud expansion, both instabilities are likely to occur, while in the later stage the ion-ion instability is more likely to occur.

Ma, T. Z.↗

Observations and theory of the AMPTE magnetotail barium releases

The barium releases in the magnetotail during the Active Magnetospheric Particle Tracer Explorers (AMPTE) operation were monitored by ground-based imagers and by instruments on the Ion Release Module. After each release, the data show the formation of a structured diamagnetic cavity. The cavity grows until the dynamic pressure of the expanding ions balances the magnetic pressure on its surface. The magnetic field inside the cavity is zero. The barium ions collect on the surface of the cavity, producing a shell. Plasma irregularities form along magnetic field lines draped over the surface of the cavity. The scale size of the irregularities is nearly equal to the thickness of the shell. The evolution and structuring of the diamagnetic cavity are modeled using magnetohydrodynamics theory.

Bernhardt, P. A.↗

The combined release and radiation effects satellite, a joint NASA/DOD program

The Combined Release and Radiation Effects Satellite (CRRES) program is a two-phase joint USAF/NASA program consisting of a low Earth orbit (LEO) phase and a geosynchronous transfer orbit (GTO) phase. The mission has been carefully planned to help clarify the geospace environment picture and its effects on space hardware, communications, and man. CRRES instruments were selected for synergism, accuracy, and applicability, and will be cross-calibrated for consistency. They will provide data to fill the gaps in geospace modeling data already obtained, and will update and correct existing models. The chemical release experiments and low altitude instruments will clarify the character of the ionosphere in low Earth orbit and the high altitude chemical release experiments will improve knowledge of how trapped particle populations behave out as far as synchronous altitudes. The ionospheric studies will lead to significantly improved Earth-space intercommunications.

Berrier, D. J.↗

Strain-energy-release rate analysis of the end-notched flexure specimen using the finite-element method

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtural crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finite-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

Salpekar, S. A.↗

Calculation of strain-energy release rates with higher order and singular finite elements

A general finite element procedure for obtaining strain-energy release rates for crack growth in isotropic materials is presented. The procedure is applicable to two-dimensional finite element analyses and uses the virtual crack-closure method. The procedure was applied to nonsingular 4-noded (linear), 8-noded (parabolic), and 12-noded (cubic) elements and to quarter-point and cubic singularity elements. Simple formulas for strain-energy release rates were obtained with this procedure for both nonsingular and singularity elements. The formulas were evaluated by applying them to two mode I and two mixed mode problems. Comparisons with results from the literature for these problems showed that the formulas give accurate strain-energy release rates.

Raju, I. S.↗