Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Hematite homogeneous core/shell hierarchical spheres: Surfactant-free solvothermal preparation and their improved catalytic property of selective oxidation

Solvothermal synthesis is an efficient synthetic method for preparing nano and micromaterials. Preparation of hematite through alcoholysis of ferric ion under solvothermal condition has been carried out at low concentrations. In this paper, Fe{sub 2}O{sub 3} homogeneous core/shell hierarchical nanostructures were synthesized via solvothermal treatment of FeCl{sub 3}{center_dot}6H{sub 2}O and ethanol. The achievements of such structures can be attributed to two important factors: high temperature and high concentration. Besides, the crystal water and reaction time were also important factors to the synthesis of hematite. The prepared samples were characterized using X-ray powder diffraction, Raman spectra, scanning electron microscopy equipped with an energy-dispersive X-ray spectrometer, transmission electron microscopy and Brunauer-Emmett-Teller surface area and pore size distribution. X-ray photoelectron spectroscopy showed a satellite peak at 719.8 eV, which is the characteristic peak of Fe(III). The formation mechanism of the spheres and the effects of the reactant concentrations and reaction temperatures have been discussed. Moreover, the enhanced catalytic activity of the spheres has also been investigated through oxidation of benzyl alcohol to benzaldehyde with high conversion (42%) and selectivity (95%). - Graphical abstract: Fe{sub 2}O{sub 3} homogeneous core/shell hierarchical microspheres were synthesized by solvothermal method. Owing to the special structure, the synthesized Fe{sub 2}O{sub 3} microspheres exhibit a superior catalytic activity in benzyl oxidation. Highlights: Black-Right-Pointing-Pointer Hierarchical Fe{sub 2}O{sub 3} core/shell microspheres were synthesized. Black-Right-Pointing-Pointer Microspheres were assembled by {beta}-FeOOH. Black-Right-Pointing-Pointer The sample exhibits a superior catalytic activity and selectivity. Black-Right-Pointing-Pointer The high activity and selectivity are due to the hierarchical core/shell structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic, optical and photocatalytic behavior of Mn, N doped and co-doped TiO{sub 2}: Experiment and simulation

The crystal phase structure, surface morphology, chemical states and optical properties of Mn, N mono-doped and co-doped TiO{sub 2} nanoparticles were investigated by X-ray powder diffractometry, Raman spectra, scanning electron microscopy, X-ray photoelectron spectroscopy and UV–vis diffuse reflectance spectroscopy. Meanwhile, geometry structures, formation energies, electronic and optical properties of all systems have been also analyzed by density functional theory. The results showed that the band gap values and the carrier mobility in the valence band, conduction band and impurity levels have a synergetic influence on the visible-light absorption and photocatalytic activity of the doped TiO{sub 2}. The number and the carrier mobility of impurity level jointly influence the photocatalytic activity of catalyst under visible-light. Especially, the photocatalytic activity of Mn-2N co-doped TiO{sub 2} beyond three-fold than that of pure TiO{sub 2} under visible-light. - Graphical abstract: The ILs formed by N-2p orbital in N single doped specimen lie above the VB, while the ILs formed by Mn-3d orbital in Mn single doped specimen appear below the CB. However, a large amount of ILs formed by N-2p orbital and Mn-3d orbital in N and Mn codoped specimens. The band gap values and the carrier mobility in the valence band, conduction band and impurity levels have a synergetic influence on the visible-light absorption and photocatalytic activity of the doped TiO{sub 2}. The number and the carrier mobility of impurity level jointly influence the photocatalytic activity of catalyst under visible-light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural investigation and luminescence of nanocrystalline lanthanide doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3}

Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanostructured multiferroics (nanoparticles or nanorods) were prepared by a sol-gel route. X-Ray powder diffraction results evidence that the sodium and mixed sodium-potassium niobates show orthorhombic (Pmc2{sub 1} space group), and monoclinic structure (Pm space group), respectively, confirmed by the Raman spectra. The local structure around the trivalent lanthanides was investigated with Extended X-ray Absorption Fine Structure spectroscopy at the Ln-K edge and luminescence spectroscopy. The Ln{sup 3+} ions enter the structure by substituting the alkali metals, with a 12-fold oxygen coordination, and inducing a large amount of static disorder. The visible emission bands of the Eu{sup 3+} ions indicate that multiple sites exist for the lanthanide ions, in agreement with the EXAFS results showing the largest amount of static disorder in these samples. A possible indication of clustering of oxygen vacancies around the Ln{sub Na} Double-Prime defect is obtained by VBS calculations. - Graphical Abstract: Ln{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods can be prepared by a simple sol-gel procedure. The synergy of X-ray diffraction, EXAFS and luminescence spectroscopy gives important information on the Ln{sup 3+} local environment. Highlights: Black-Right-Pointing-Pointer Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods are prepared by sol-gel. Black-Right-Pointing-Pointer EXAFS indicates that the Ln{sup 3+} ions substitutes the Na{sup +} and K{sup +} ions, inducing a large amount of static disorder. Black-Right-Pointing-Pointer The visible emission bands of the Eu{sup 3+} ions confirm that multiple sites exist for the lanthanide ions.

36 MATERIALS SCIENCE↗

A facile one-step synthesis of Mn{sub 3}O{sub 4} nanoparticles-decorated TiO{sub 2} nanotube arrays as high performance electrode for supercapacitors

Via a facile one-step chemical bath deposition route, homogeneously dispersed Mn{sub 3}O{sub 4} nanoparticles have been successfully deposited onto the inner surface of TiO{sub 2} nanotube arrays (TNAs). The content and size of Mn{sub 3}O{sub 4} can be controlled by changing the deposition time. Field emission scanning electron microscopy and transmission electron microscopy analysis reveal the morphologies structures of Mn{sub 3}O{sub 4}/TNAs composites. The crystal-line structures are characterized by the X-ray diffraction patterns and Raman spectra. X-ray photoelectron spectroscopy further confirms the valence states of the sample elements. The electrochemical properties of Mn{sub 3}O{sub 4}/TNAs electrodes are systematically investigated by the combine use of cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. The resulting Mn{sub 3}O{sub 4}/TNAs electrode prepared by deposition time of 3 h shows the highest specific capacitance of 570 F g{sup −1} at a current density of 1 A g{sup −1}. And it also shows an excellent long-term cycling stability at a current density of 5 A g{sup −1}, which remaining 91.8% of the initial capacitance after 2000 cycles. Thus this kind of Mn{sub 3}O{sub 4} nanoparticles decorated TNAs may be considered as an alternative promising candidate for high performance supercapacitor electrodes. - Graphical abstract: Mn{sub 3}O{sub 4} nanoparticles have been uniformly deposited onto the inner surfaces of TiO{sub 2} nanotube arrays through a facile one-step chemical bath deposition method. As electrodes for supercapacitors, they exhibit a relatively high specific capacity and excellent cycling stability. - Highlights: • Mn{sub 3}O{sub 4} nanoparticles have been deposited onto TiO{sub 2} nanotube arrays by chemical bath deposition. • The Mn{sub 3}O{sub 4}/TNAs exhibits a highest specific capacitance of 570 F g{sup –1} at a current density of 1 A g{sup –1}. • The Mn{sub 3}O{sub 4}/TNAs electrode shows an excellent cycling stability of 91.8% after 2000 cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface studies of hydroxylated multi-wall carbon nanotubes

CVD grown MWCNTs, of typical diameter 5 to 50 nm and with approximately 15-20 concentric graphene layers in the multi-walls, have been surface functionalised using the Fenton hydroxylation reaction. HRTEM reveals little physical difference between the treated and untreated materials; images from both exhibit similar multi-wall structure and contain evidence for some low-level disruption of the very outermost layers. Raman spectra from the two types of nanotubes are almost identical displaying the disorder (D) peaks at approximately 1350 cm{sup -1} and graphite (G) peaks at approximately 1580 cm{sup -1}, characteristic of graphene-based carbon materials, in approximately equal intensity ratios. Equilibrium adsorption data for nitrogen at 77 K leads to BET surface areas of 60.4 m{sup 2} g{sup -1} for the untreated and 71.8 m{sup 2} g{sup -1} for the hydroxylated samples; the increase in area being due to separation of the tube-bundles during functionalization. This is accompanied by a decrease in measured porosity, mostly at high relative pressures of nitrogen, i.e. where larger (meso 2-5 nm and macro >5 nm) pores are being filled, which is consistent with an attendant loss of inter-tube capillarity. X-ray photoelectron spectroscopy (XPS) shows that hydroxylation increases the nanotube surface oxygen level from 4.3 at.% to 22.3 at.%; chemical shift data indicate that approximately 75% of that oxygen is present as hydroxyl (-OH) groups. Water vapour adsorption by the hydroxylated surfaces leads to Type II isotherms which are characteristic of relatively high numbers of hydrogen bonding interactions compared to the untreated materials which exhibit Type III curves. This difference in polar surface energy is confirmed by calorimetric enthalpies of immersion in water which are -54 mJ m{sup -2} for the untreated and -192 mJ m{sup -2} for the hydroxylated materials. The treated materials therefore have significantly increased water wettability/dispersivity and a greater potential for cross-linking with matrix compounds. The mechanism by which hydroxylation occurs i.e. free radical (OH{sm_bullet}) attack and subsequent electrophilic addition at CC bonds in the graphene basal planes, is discussed.

08 HYDROGEN↗

Optical phonons in CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys

The Raman spectra of CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys (x = 0.1, 0.2, Horizontal-Ellipsis 0.9) are studied. Both the singlemode and double-mode behavior of optical phonons are observed in CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys. The observed optical mode at 138 cm{sup -1} is independent of the composition. It seems likely that this mode is the 'breathing mode' and is caused by atomic motion in the anion sublattice relative to vacancies. It is shown that the high-frequency modes of symmetry B{sub 1}(LO, TO) and B{sub 2}(LO, TO) are caused by the in-phase motion of atoms in the anion sublattice along the tetragonal axis c relative to trivalent Ga atoms. The doubly degenerate symmetry modes E{sub 1}(LO, TO) and E{sub 2}(LO, TO) are caused by the in-phase motion of atoms in the anion sublattice relative to trivalent Ga atoms of the cation sublattice in the xy plane (dipole 2Ga-4C), where C is S, Se. The optical symmetry modes B{sub 3}(LO, TO) and B{sub 4}(LO, TO) are associated with the motion of atoms in the anion sublattice relative to Cd atoms along the tetragonal axis c. The doubly degenerate modes E{sub 3}(LO, TO) and E{sub 4}(LO, TO) are associated with the motion of atoms in the anion sublattice relative to Cd atoms (dipole Cd-4C). The low-frequency modes B{sub 5}(LO, TO) and E{sub 5}(LO, TO) are the analogs of acoustic phonons at the edge of the Brillouin zone of sphalerite.

36 MATERIALS SCIENCE↗

Stacking-dependent interlayer coupling in trilayer MoS 2 with broken inversion symmetry

The stacking configuration in few-layer two-dimensional (2D) materials results in different structural symmetries and layer-to-layer interactions, and hence it provides a very useful parameter for tuning their electronic properties. For example, ABA-stacking trilayer graphene remains semimetallic similar to that of monolayer, while ABC-stacking is predicted to be a tunable band gap semiconductor under an external electric field. Such stacking dependence resulting from many-body interactions has recently been the focus of intense research activities. Here we demonstrate that few-layer MoS 2 samples grown by chemical vapor deposition with different stacking configurations (AA, AB for bilayer; AAB, ABB, ABA, AAA for trilayer) exhibit distinct coupling phenomena in both photoluminescence and Raman spectra. By means of ultralow-frequency (ULF) Raman spectroscopy, we demonstrate that the evolution of interlayer interaction with various stacking configurations correlates strongly with layer-breathing mode (LBM) vibrations. Our ab initio calculations reveal that the layer-dependent properties arise from both the spin–orbit coupling (SOC) and interlayer coupling in different structural symmetries. Lastly, such detailed understanding provides useful guidance for future spintronics fabrication using various stacked few-layer MoS 2 blocks.

36 MATERIALS SCIENCE↗

Further Investigations of the Effect of Replacing Lithium by Sodium on Lithium Silicate Scintillating Glass Efficiency

Ce3+ doped lithium (6Li) silicate glasses are thermal neutron detectors. Prior work showed that when sodium (Na) is substituted for Li the scintillation efficiency, under beta particle stimulation, increased and then decreased as the sodium (Na) content was increased [1]. When all the 6Li was replaced by Na no scintillation was observed. Raman spectra, acquired using a visible excitation source provided no evidence of anomalous behavior. SEM microscopy did show some phase separation, but there was no obvious correlation with the scintillation efficiency. We have reexamined these glass samples using deep UV Raman excitation which reduces fluorescence interference. The newly acquired spectra show evidence of phase separation in the glasses. Specifically we see a peak at 800 cm-1 Raman shift which can be assigned to a vitreous silica moiety that results from phase separation. There is a strong correlation between this peak's area, the scintillation efficiency, and the Na content. The observed trend suggests that phase separation enhances scintillation and addition of Na reduces the amount of phase separation. We also see evidence of at least two defect structures that can be tentatively assigned to a three-membered ring structure and an oxygen vacancy. The latter is fairly strongly correlated with enhanced scintillation efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vibrational spectra and structure of azomethane and azomethane-d6.

The infrared and Raman spectra of azomethane and azomethane-d(6) were examined in detail. Vibrational data provided definitive verification of a trans-structure with C(2h) symmetry. A vibrational assignment is proposed for the 24 fundamental modes based upon the observed contours, isotopic shift ratios, and group frequency correlations. Spectra of the polycrystalline samples indicate that there are at least four molecules per unit cell, since a number of the bands were observed to be split into doublets. The crystal also appeared to have a center of symmetry, since mutual exclusion was clearly operative.

Durig, J. R.↗

Ion-Beam Synthesis of the Crystalline Ge Phase in SiO{sub x}N{sub y} Films upon Annealing under High Pressure

The nucleation of the crystalline Ge phase in SiO{sub x}N{sub y} films implanted with Ge{sup +} ions with the energy 55 keV to doses of 2.1 × 10{sup 15}–1.7 × 10{sup 16} cm{sup –2} and then annealed at a temperature of T{sub a} = 800–1300°C under pressures of 1 bar and 1–12 kbar is studied. From analysis of the Raman spectra, it is concluded that amorphous Ge precipitates increase in size upon hydrostatic compression at a temperature of 1000°C. Raman scattering at optical phonons localized in Ge nanocrystals is observed only after annealing of the samples with the highest content of implanted atoms at a temperature of 1300°C. In the photoluminescence spectra, a peak is observed at the wavelength ∼730 nm. The peak is considered to be the manifestation of the quantum-confinement effect in nanocrystals ∼3 nm in size.

36 MATERIALS SCIENCE↗

Dicarboxylate assisted synthesis of the monoclinic heterometallic tetrathiocyanato bridged copper(II) and mercury(II) coordination polymer {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n}: Synthesis, structural, vibration, luminescence, EPR studies and DFT calculations

The synthesis of the monoclinic polymorph of {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The compound, as determined by X-ray diffraction of a twinned crystal, consists of mercury and copper atoms linked by {mu}{sub 1,3}-SCN bridges. The crystal packing shows a highly porous infinite 3D structure. Diagnostic resonances for the SCN{sup -} ligand and metal-ligand bonds in the IR, far-IR and Raman spectra are assigned and discussed. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. The DFT calculations show that the observed luminescence of the compound arises mainly from an excited LLCT state with small MLCT contributions (from the copper to unoccupied {pi}{sup *} orbital of the thiocyanate groups). The X-band EPR spectrum of the powdered sample at room temperature reveals an axial signal with anisotropic g factors consistent with the unpaired electron of Cu(II) ion in the d{sub x}{sup 2}{sub -y}{sup 2} orbital. -- Graphical abstract: Synthesis and X-ray structure determination of the monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The IR, far-IR, Raman, photoluminescence as well as EPR spectra of the compound is discussed. Also, the emission and semiconducting behavior of the compound is illustrated through the density functional theory calculation of electronic band structure along with density of states. Display Omitted Research highlights: > The monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} has been prepared. > The structure of the compound is determined by XRD of a twinned crystal. > The IR, far-IR, Raman, EPR and emission spectra of the compound is investigated. > As shown by DFT calculations, the emission bands of the compound are mainly LLCT. > Small MLCT from the copper to the thiocyanate groups contributes to these bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation of structure and ion conduction in La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) oxygen ion conductors

Correlation of structure and ion conduction of La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) has been investigated. The cubic symmetry with space group P2{sub 1}3 and other structural parameters are obtained from Rietveld refinement of X-ray diffraction patterns of Y doped samples. The average lanthanum-oxygen and molybdenum-oxygen distances are obtained from the electron density contour plot. The transmission electron microscopic study confirms the cubic nature of the samples and also provides an estimate of thickness of the grain boundary. The scanning transmission electron microscope energy dispersive spectrometer mapping confirms the different orientations of grains. The composition dependence of the ionic conductivity has been correlated with that of O2 and O3 site occupancies in the [O1La{sub 3}Mo] antitetrahedral unit. The different vibrational modes in the low frequency region due to vibration of Mo-O bands are confirmed from the analysis of FTIR and Raman spectra. The full widths at half maximum of most of the Mo-O bands are found to be independent of Y doping. Additionally, the shifts in the position of Raman bands are correlated with unit cell parameter using Grüneisen constant.

36 MATERIALS SCIENCE↗

Distinct spin–lattice and spin–phonon interactions in monolayer magnetic CrI 3

In this study, we apply the density-functional theory to study various phases (including non-magnetic (NM), anti-ferromagnetic (AFM), and ferromagnetic (FM)) in monolayer magnetic chromium triiodide (CrI 3 ), a recently fabricated 2D magnetic material. It is found that: (1) the introduction of magnetism in monolayer CrI 3 gives rise to metal-to-semiconductor transition; (2) the electronic band topologies as well as the nature of direct and indirect band gaps in either AFM or FM phases exhibit delicate dependence on the magnetic ordering and spin–orbit coupling; and (3) the phonon modes involving Cr atoms are particularly sensitive to the magnetic ordering, highlighting distinct spin–lattice and spin–phonon coupling in this magnet. First-principles simulations of the Raman spectra demonstrate that both frequencies and intensities of the Raman peaks strongly depend on the magnetic ordering. The polarization dependent A 1g modes at 77 cm -1 and 130 cm -1 along with the E g mode at about 50 cm -1 in the FM phase may offer a useful fingerprint to characterize this material. Lastly, our results not only provide a detailed guiding map for experimental characterization of CrI 3 , but also reveal how the evolution of magnetism can be tracked by its lattice dynamics and Raman response.

36 MATERIALS SCIENCE↗

Photoluminescence and Raman spectroscopy of wide bandgap semiconductors damaged by deep-UV laser irradiation

The effects of a pulsed, focused, deep-UV (4.66 eV) laser on wide and ultra-wide bandgap semiconductors were investigated with photoluminescence (PL) and Raman spectroscopy. Three semiconductor single crystals were studied: silicon carbide (6H-SiC), gallium nitride (GaN), and gallium oxide (β-Ga 2 O 3 ). Atomic emission lines from neutral Ga or Si were observed during the laser-damage process. For all three semiconductors, PL mapping (3.49 eV laser excitation) of the damaged material revealed visible emission bands in the 2.6–2.8 eV range, attributed to point defects. Raman spectra (2.33 eV excitation) showed a reduction in the Raman peak intensities in the damaged region, along with weak PL bands around 1.9–2.1 eV.

36 MATERIALS SCIENCE↗

Characterization of Fluorescence Signals in Synthetic Anorthite

In-situ resource utilization (ISRU) is a key capability to enable a long term presence on the Moon and other planetary bodies. For example, efforts have been underway to develop processes to utilize the lunar regolith to produce building materials and extract useful resources. In processes that utilize the regolith directly to produce construction materials, such as in various sintering methods, characterizing the composition of the regolith is important as the composition can affect the optimal process parame-ters. In processes that involve extracting resources such as iron, oxygen, hydrogen, etc., identifying areas with higher abundance of a particular resource will be critical since different regions of the Moon exhibit differing regolith composition. To this end, Ra-man is one technique that can rapidly characterize the mineralogy of rock samples. This technique has al-ready been deployed on Mars to detect various miner-als including olivine, carbonates, phosphates, etc. Besides characterizing the mineralogy, Raman spectra often contain unwanted fluorescence signals that can mask Raman peaks. In some cases, the fluorescence signals are narrow enough to aid in the identification of specific elements in soils. In this work, we explore fluorescence peaks in a synthetic anorthite sample, which are at the same position as Ruby fluorescence peaks attributed to chromium. These fluorescence peaks, as well as similar fluorescence peaks attributed to other elements, could have important implications for ISRU and the mining of critical resources as has been previously described.

Raman Spectroscopy↗

Structural dependence of crystallization in glasses along the nepheline (NaAlSiO 4 ) ‐ eucryptite (LiAlSiO 4 ) join

Abstract Lithium and sodium aluminosilicates are important glass‐forming systems for commercial glass‐ceramics, as well as being important model systems for ion transport in battery studies. In addition, uncontrolled crystallization of LiAlSiO 4 (eucryptite) in high‐Li 2 O compositions, analogous to the more well‐known problem of NaAlSiO 4 (nepheline) crystallization, can cause concerns for long‐term chemical durability in nuclear waste glasses. To study the relationships between glass structure and crystallization, nine glasses were synthesized in the Li x Na 1‐ x AlSiO 4 series, from x = 0 to x = 1. Raman spectra, nuclear magnetic resonance ( NMR ) spectroscopy (Li‐7, Na‐23, Al‐27, Si‐29), and X‐ray diffraction were used to study the quenched and heat‐treated glasses. It was found that different LiAlSiO 4 and NaAlSiO 4 crystal phases crystallize from the glass depending on the Li/Na ratio. Raman and NMR spectra of quenched glasses suggest similar structures regardless of alkali substitution. Li‐7 and Na‐23 NMR spectra of the glass‐ceramics near the endmember compositions show evidence of several differentiable sites distinct from known Li x Na 1‐ x AlSiO 4 crystalline phases, suggesting that these measurements can reveal subtle chemical environment differences in mixed‐alkali systems, similar to what has been observed for zeolites.

Marcial, José↗

Raman Scattering Studies in Dilute Magnetic Semiconductor Zn(1-x)Co(x)O

Raman spectra of ZnO and Co substituted Zn1-xCoxO (ZCO) were carried out using the Raman microprobe system with an p.,+ ion laser source of 514.5 nm wavelength. The shift towards the lower frequency side of the nonpolar E210w mode and the broadening due to Co substitution in ZnO were analyzed using the phonon confinement model. The magnetic measurements showed ferromagnetic behavior with the maximum saturation magnetization (1.2micron Beta/ErCo) for 10% Co substitution, which decreased wi th at further increase in Co concentrations. The intensities of E1(LO) at 584 cm-1 and multiphonon modes at 540 cm-1 were increased with an increase in Co substitution. The additional Raman modes in ceramic targets of ZCO spectra for higher concentration of Co substitution (x=15%-20%) were identified to be due to the spinel ZnCo2O4 secondary phase.

Samanta, K.↗