Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION INTENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Marked surface inversions and wind shear: A safety risk for departing aircraft

Marked surface inversions occur most frequently in dry continental climates, where low atmospheric humidity allows heat transfer by long wave thermal radiation. In the northern latitudes, surface inversions reach their maximum intensity during the winter, when the incoming Sun's radiation is negligible and radiative cooling is dominant during the long nights. During winter, air mass boundaries are sharp, which causes formation of marked surface inversions. The existence of these inversions and sharp boundaries increase the risk of wind shear. The information should refer to marked inversions exceeding a temperature difference of 10 deg C up to 1000 feet. The need to determine the temperature range over which he information is operationally needed and the magnitude of the inversion required before a notification to pilots prior to departure is warranted are outlined.

Ossi Korhonen↗

Two-photon collisional redistribution of radiation

Collisional redistribution in the presence of two weakly exciting laser fields is studied, including the effects due to degeneracy of the radiator states. A general expression for the total redistributed intensity is derived valid for arbitrary detunings and polarizations of the exciting laser fields. In particular, this expression contains all single-collision and sequential-collision contributions, which are equally important under certain circumstances. The similarities and differences between the redistributed intensity as calculated in this paper and the collisionally aided radiative excitation cross sections studied by Yeh and Berman (1979) and Light and Szoke (1978) are pointed out.

Alber, G.↗

GOES Satellite Data Validation Via Hand-held 4 LED Sun Photometer at Norfolk State University

Sun photometry is a passive means of measuring a quantity of light radiation. The GIFTS- IOMI/GLOBE Water Vapor/Haze Sun photometer contains four light emitting diodes (LEDs), which are used to convert photocurrent to voltage. The intensity of the incoming and outgoing radiation as detected on the Earth s surface can be affected by aerosols and gases in the atmosphere. The focus of this research is primarily on aerosol and water vapor particles that absorb and reemit energy. Two LEDs in the photometer correspond to light scattered at 530 nm (green spectrum) and 620 nm (red spectrum). They collect data pertaining to aerosols that scatter light. The other two LEDs detect the light scattered by water vapor at wavelengths of 820 nm and 920 nm. The water vapor measurements will be compared to data collected by the Geostationary Observation Environmental Satellite (GOES). Before a comparison can be made, the extraterrestrial constant (ET), which is intrinsic to each sun photometer, must be measured. This paper will present determination of the ET constant, from which the aerosol optical thickness (AOT) can be computed for comparison to the GOES satellite to ascertain the reliability of the sun photometer.

Reynolds, Arthur, Jr.↗

A Neural Network Correction to the Scalar Approximation in Radiative Transfer

The next generation of advanced high-resolution sensors in geostationary orbit will gather detailed information for studying the Earth system. There is an increasing desire to perform observing system simulation experiments (OSSEs) for new sensors during the development phase of the mission in order to better leverage information content from the new and existing sensors. Forward radiative transfer calculations that simulate the observing characteristics of a new instrument are the first step to an OSSE, and they are computationally intensive. The scalar approximation to the radiative transfer equation, a simplification of the vector representation, can save considerable computational cost, but produces errors in top of the atmosphere (TOA) radiance as large as 10% due to neglecting polarization effects. This article presents an artificial neural network technique to correct scalar TOA radiance over both land and ocean surfaces to within 1% of vector-calculated radiance. A neural network was trained on a database of scalar-vector TOA radiance differences at a large range of solar and viewing angles for several thousand realistic atmospheric vertical profiles that were sampled from a high resolution (7 km) global atmospheric transport model. The profiles include Rayleigh scattering and aerosol scattering and absorption. Training and validation of the neural network was demonstrated for two wavelengths in the ultraviolet-visible (US-Vis) spectral range (354 nm and 670 nm). The significant computational savings accrued from using a scalar approximation plus neural network correction approach to simulating TOA radiance will make feasible hyperspectral forward simulations of high-resolution sensors on geostationary satellites, such as TEMPO, GOES-R, GEMS, and SENTINEL-4.

TOA↗

Ordinary mode auroral kilometric radiation fine structure observed by DE 1

The fine structure observed with intense right-hand extraordinary (R-X) mode auroral kilometric radiation (AKR) has received major theoretical attention. Data from the Dynamics Explorer 1 plasma wave instrument indicate that left-hand ordinary (L-O) mode AKR possesses similar fine structure. Several theories have been proposed to explain the fine structure of the R-X mode AKR. In order to account for the L-O mode fine structure, these theories will have to be modified to produce the L-O mode directly or will have to rely on mode conversion processes from the R-X to the L-O mode.

Benson, Robert F.↗

Cirrus microphysics and radiative transfer: A case study

During the Cirrus Intensive Field Operations of FIRE, data collected by the NCAR King Air in the vicinity of Wausau, WI on October 28 were selected to study the influence of cirrus cloud microphysics on radiative transfer and the role of microphysical approximations in radiative transfer models. The instrumentation of the King Air provided, aside from temperature and wind data, up-and downwelling broadband solar and infrared fluxes as well as detailed microphysical data. The aircraft data, supplied every second, are averaged over the 7 legs to represent the properties for that altitude. The resulting vertical profiles, however, suffer from the fact that each leg represents a different cloud column path. Based on the measured microphysical data particle size distributions of equivalent spheres for each cloud level are developed. Accurate radiative transfer calculations are performed, incorporating atmospheric and radiative data from the ground and the stratosphere. Comparing calculated to the measured up- and downwelling fluxes at the seven cloud levels for both the averaged and the three crossover data will help to assess the validity of particle size and shape approximation as they are frequently used to model cirrus clouds. Once agreement is achieved the model results may be applied to determine, in comparison to a cloudfree case, the influence of this particular cirrus on the radiation budget of the earth atmosphere system.

Kinne, Stefan A.↗

System for Manipulating Drops and Bubbles Using Acoustic Radiation Pressure

The manipulation and control of drops of liquid and gas bubbles is achieved using high intensity acoustics in the form of and/or acoustic radiation pressure and acoustic streaming. generated by a controlled wave emission from a transducer. Acoustic radiation pressure is used to deploy or dispense drops into a liquid or a gas or bubbles into a liquid at zero or near zero velocity from the discharge end of a needle such as a syringe needle. Acoustic streaming is useful in manipulating the drop or bubble during or after deployment. Deployment and discharge is achieved by focusing the acoustic radiation pressure on the discharge end of the needle, and passing the acoustic waves through the fluid in the needle. through the needle will itself, or coaxially through the fluid medium surrounding the needle. Alternatively, the acoustic waves can be counter-deployed by focusing on the discharge end of the needle from a transducer axially aligned with the needle, but at a position opposite the needle, to prevent premature deployment of the drop or bubble. The acoustic radiation pressure can also be used for detecting the presence or absence of a drop or a bubble at the tip of a needle or for sensing various physical characteristics of the drop or bubble such as size or density.

Oeftering, Richard C.↗

On the detection of magnetospheric radio bursts from Uranus and Neptune

Earth, Jupiter, and Saturn are sources of intense but sporadic bursts of electromagnetic radiation or magnetospheric radio bursts (MRB). The similarity of the differential power flux spectra of the MRB from all three planets is examined. The intensity of the MRB is scaled for the solar wind power input into a planetary magnetosphere. The possibility of detecting MRB from Uranus and Neptune is considered.

Kennel, C. F.↗

X ray based displacement measurement for hostile environments

A new method on noncontacting, high temperature extensometry based on the focus and scanning of x rays is currently under development and shows great promise of overcoming limitations associated with available techniques. The chief advantage is the ability to make undisturbed measurements through stratified or flowing gases, smoke, and flame. The system is based on the ability to focus and scan low energy, hard x rays such as those emanating from copper or molybdenum sources. The x rays are focused into a narrow and intense line image which can be scanned onto targets that fluoresce secondary x ray radiation. The final goal of the system is the ability to conduct macroscopic strain measurements in hostile environments by utilizing two or more fluorescing targets. Current work is limited to displacement measurement of a single target with a resolution of 1.25 micro-m and a target temperature of 1200 C, directly through an open flame. The main advantage of the technique lies in the penetrating nature of x rays which are not affected by the presence of refracting gas layers, smoke, flame, or intense thermal radiation, all of which could render conventional extensometry methods inoperative or greatly compromise their performance.

Canistraro, Howard A.↗

Description of the Sun as a Star: General Physical Characteristics

Numerical parameters characterizing the size and energy output of the sun are presented. These values are the standard yardstick by which other stars are measured. The large number of significant digits tabulated here serve mainly to illustrate the precision to which these parameters are known. Also listed are parameters characterizing the earth's orbit around the sun and the intensity of the sun's radiation at the mean orbital distance. The appearance of the sun depends critically on how it is observed. Each type of radiation observed carries specific information about the physical processes at work on the sun. Special types of instruments reveal aspects otherwise invisible. Coronagraphs reveal the dimmer outer regions of the sun's atmosphere otherwise visible only during total solar eclipses. Spectroscopy can reveal motions, magnetic field strengths, temperatures and densities. In situ measurements have revealed the characteristics of the solar wind and extended our knowledge of the solar magnetic field both near the earth and beyond the orbits of the planets. As an example, the sun's disk observed almost simultaneously in six different wavelengths of light is shown. In visible light we can see the white disk of the sun with the dark spots known as sunspots. By analyzing the spectral lines produced by the sun we can measure the strength of the sun's magnetic field at its surface, producing a magnetogram. This magnetogram reveals that the sunspots are regions of intense magnetic field. Further images of the sun reveal that the sunspot regions are just the bases of systems of hot loops which emit radio-waves, ultraviolet light and X-rays. The sun imaged in a spectral line of hydrogen known as "H alpha" is shown. In this line we also see the long dark "filaments". These filaments form in long channels between areas of opposing magnetic field. Such channels can be seen in the ultraviolet image. Data concerning the sun are obtained with many different kinds of instruments and from many different vantage points, both on the ground and in space. Techniques for observing the sun's various emissions throughout the electromagnetic spectrum are illustrated.

Kucera, Theresa↗

Equilibrium structure of solar magnetic flux tubes: Energy transport with multistream radiative transfer

We examine the equilibrium structure of vertical intense magnetic flux tubes on the Sun. Assuming cylindrical geometry, we solve the magnetohydrostatic equations in the thin flux-tube approximation, allowing for energy transport by radiation and convection. The radiative transfer equation is solved in the six-stream approximation, assuming gray opacity and local thermodynamic equilibrium. This constitutes a significant improvement over a previous study, in which the transfer was solved using the multidimensional generalization of the Eddington approximation. Convection in the flux tube is treated using mixing-length theory, with an additional parameter alpha, characterizing the suppression of convective energy transport in the tube by the strong magnetic field. The equations are solved using the method of partial linearization. We present results for tubes with different values of the magnetic field strength and radius at a fixed depth in the atmosphere. In general, we find that, at equal geometric heights, the temperature on the tube axis, compared to the ambient medium, is higher in the photosphere and lower in the convection zone, with the difference becoming larger for thicker tubes. At equal optical depths the tubes are generally hotter than their surroundings. The results are comparatively insensitive to alpha but depend upon whether radiative and convective energy transport operate simultaneously or in separate layers. A comparison of our results with semiempirical models shows that the temperature and intensity contrast are in broad agreement. However, the field strengths of the flux-tube models are somewhat lower than the values inferred from observations.

Hasan, S. S.↗

Mechanisms of Diurnal Precipitation over the United States Great Plains: A Cloud-Resolving Model Simulation

The mechanisms of summertime diurnal precipitation in the US Great Plains were examined with the two-dimensional (2D) Goddard Cumulus Ensemble (GCE) cloud-resolving model (CRM). The model was constrained by the observed large-scale background state and surface flux derived from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program s Intensive Observing Period (IOP) data at the Southern Great Plains (SGP). The model, when continuously-forced by realistic surface flux and large-scale advection, simulates reasonably well the temporal evolution of the observed rainfall episodes, particularly for the strongly forced precipitation events. However, the model exhibits a deficiency for the weakly forced events driven by diurnal convection. Additional tests were run with the GCE model in order to discriminate between the mechanisms that determine daytime and nighttime convection. In these tests, the model was constrained with the same repeating diurnal variation in the large-scale advection and/or surface flux. The results indicate that it is primarily the surface heat and moisture flux that is responsible for the development of deep convection in the afternoon, whereas the large-scale upward motion and associated moisture advection play an important role in preconditioning nocturnal convection. In the nighttime, high clouds are continuously built up through their interaction and feedback with long-wave radiation, eventually initiating deep convection from the boundary layer. Without these upper-level destabilization processes, the model tends to produce only daytime convection in response to boundary layer heating. This study suggests that the correct simulation of the diurnal variation in precipitation requires that the free-atmospheric destabilization mechanisms resolved in the CRM simulation must be adequately parameterized in current general circulation models (GCMs) many of which are overly sensitive to the parameterized boundary layer heating.

Lee, M.-I.↗

Atmospheric Ionizing Radiation (AIR): Analysis, Results, and Lessons Learned From the June 1997 ER-2 Campaign

The United States initiated a program to assess the technology required for an environmentally safe and operationally efficient High Speed Civil Transport (HSCT) for entrance on the world market after the turn of the century. Due to the changing regulations on radiation exposures and the growing concerns over uncertainty in our knowledge of atmospheric radiations, the NASA High Speed Research Project Office (HSRPO) commissioned a review of "Radiation Exposure and High-Altitude Flight" by the National Council on Radiation Protection and Measurements (NCRP). On the basis of the NCRP recommendations, the HSRPO funded a flight experiment to resolve the environmental uncertainty in the atmospheric ionizing radiation levels as a step in developing an approach to minimize the radiation impact on HSCT operations. To minimize costs in this project, an international investigator approach was taken to assure coverage with instrument sensitivity across the range of particle types and energies to allow unique characterization of the diverse radiation components. The present workshop is a result of the flight measurements made at the maximum intensity of the solar cycle modulated background radiation levels during the month of June 1997.

Wilson, J. W.↗

Interstellar scattering of pulsar radiation. 1: Scintillation

An investigation of the intensity fluctuations of 28 pulsars near 0.4 GHz indicates that scintillation spectra have a Gaussian shape, scintillation indices are near unity, and the scintillation bandwidth depends linearly on dispersion measure. Observations near 2.5 GHz suggest a strong dependence of the frequency at which scintillation indices fall below unity on dispersion measure. Multistation measurements of scintillation provide values or limits for the scale size of the scattering diffraction pattern. The dependences of scattering parameters on dispersion measure is discussed in terms of the current models. It is suggested that any line of sight through the galaxy encounters increasingly rare, increasingly large deviations of thermal electron density on the scale of 10 to the 11th power cm.

Backer, D. C.↗

Interstellar scattering of pulsar radiation. I - Scintillation

An investigation of the intensity fluctuations of 28 pulsars near 0.4 GHz indicates that spectra of interstellar scintillation are consistent with a Gaussian shape, that scintillation indices are near unity, and that the scintillation bandwidth depends linearly on dispersion measure. Observations at cm wavelengths show that the observer is in the near field of the scattering medium for objects with the lowest dispersion measures, and confirm the steep dependence of correlation bandwidth on dispersion measure found by Sutton (1971). The variations of scattering parameters with dispersion measure may indicate that the rms deviation of thermal electron density on the scale of 10 to the 11th cm grows with path length through the galaxy.

Backer, D. C.↗

Inexpensive Meter for Total Solar Radiation

Pyranometer containing solar cells measures combined intensity of direct light from Sun and diffuse light from sky. Instrument includes polyethylene dome that diffuses entering light so output of light detectors does not vary significantly with changing angle of Sun during day. Not to be calibrated for response of each detector to Sun angle, and sensor outputs not corrected separately before summed and integrated. Aids in deciding on proper time to harvest crops.

Laue, E. G.↗