Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Porous Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Electrochemical impregnation of nickel hydroxide in porous electrodes

The electrochemical impregnation of nickel hydroxide in porous electrode was investigated both experimentally and theoretically. The loading level and plaque expansion were the most important parameters to be considered. The effects of applied current density, stirring, ratio of solution to electrode volume and pH were identified. A novel flow through electrochemical impregnation is proposed in which the electrolyte is forced through the porous nickel plaque. The thickening of the plaque can be reduced while maintaining high loading capacity. A mathematical model is presented which describes the transport of the nitrate, nickel and hydroxyl ions and the consecutive heterogeneous electrochemical reduction of nitrate and the homogeneous precipitation reaction of nickel hydroxide. The distributions of precipitation rate and active material within the porous electrode are obtained. A semiempirical model is also proposed which takes into account the plugging of the pores.

Ho, Kuo-Chuan↗
NASA NTRS1971

Lunar surface engineering properties experiment definition

Research on the mechanics of lunar soils and on developing probes to determine the properties of lunar surface materials is summarized. The areas of investigation include the following: soil simulation, soil property determination using an impact penetrometer, soil stabilization using urethane foam or phenolic resin, effects of rolling boulders down lunar slopes, design of borehole jack and its use in determining failure mechanisms and properties of rocks, and development of a permeability probe for measuring fluid flow through porous lunar surface materials.

Mitchell, J. K.↗
DOE OSTI2022

Experimental Observations for Anode Optimization of Oxide Reduction Equipment

The electrochemical behavior of several components has been investigated during the electrolysis of nickel oxide in LiCl-Li 2 O salt mixture at 650°C. The focus of this work is to improve anode design and shroud to increase current densities. The tested components were ceramic anode shroud porosity, porosity size, anode geometry, anode material, and metallic porous anode shroud. The goal of these experiments was to optimize and improve the reduction process. The highest contributors to higher current densities were anode shroud porosity and anode geometry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Molecular dynamics simulations of energy accommodation between gases and polymers for ultra-low thermal conductivity insulation

Determining the energy accommodation between gases and solids is essential to developing porous thermal insulation materials with ultra-low effective thermal conductivity that reduce energy use, greenhouse gas emissions, and fossil fuel consumption. The energy accommodation coefficients of most gases, however, have been rarely studied, especially with respect to solids that have relatively high thermal resistivity, e.g., polymers. Here, by using all-atom nonequilibrium molecular dynamics simulations, we reveal the accommodation coefficients of He, Ar, N 2 , and O 2 with polymers, mainly polystyrene. We find that their values are around 0.51, 0.72, 0.79, and 0.90, respectively, suggesting a critical reexamination of the commonly used theoretical maximum value of 1. We have also conducted experiments and validated the value for air, which is about 0.81. Such a change in accommodation coefficients can lead to a reduction of about 70%, 50%, 35%, and 20% in the thermal conductivity of He, Ar, N 2 , and O 2 gases in nano pores (below 100 nm) or at low pressures (below 1 millibar). With these new accommodation coefficients, we find that in a 10 nm pore with ambient pressure at 300 K, the gas thermal conductivity of He, Ar, N 2 , and O 2 in porous polystyrene can be as low as 9.7 × 10 –4 , 3.4 × 10 –4 , 7.3 × 10 –4 , and 8.5 × 10 –4 W·m –1 ·K –1 , respectively, which are two to three orders of magnitude lower than their bulk values, promising higher thermal resistivity of insulation materials. This work reveals the fundamental energy exchange between gases and polymers, providing important guidance for designing high-performance thermal insulation materials for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reticular Chemistry for Highly Porous Metal–Organic Frameworks: The Chemistry and Applications

Current global crises related to clean energy and the environment entail the development of materials that are capable of addressing these challenges. Metal–organic frameworks (MOFs), a class of functional materials assembled from metal-containing nodes and organic ligands via coordination bonds, have been successfully developed for various applications, including catalysis, toxic chemical removal, and gas storage and separation, as a result of their highly tailorable nature and precisely engineered pore structures. In particular, the exceptionally high surface areas and porosities of MOFs are two of their most attractive characteristics and place them among the best porous materials for the storage of clean energy gases, such as hydrogen and methane. Reticular chemistry stands out as a prominent approach to the design of MOFs as this strategy allows for the rational top-down design of frameworks guided by topological nets to afford extended framework structures with precise architectural arrangements at the molecular level. Furthermore, bridging the gap between reticular chemistry design strategies and highly porous MOFs can facilitate the development of next-generation high-performance materials through state-of-the-art chemical design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Visible photoluminescence of porous Si(1-x)Ge(x) obtained by stain etching

We have investigated visible photoluminescence (PL) from thin porous Si(1-x)Ge(x) alloy layers prepared by stain etching of molecular-beam-epitaxy-grown material. Seven samples with nominal Ge fraction x varying from 0.04 to 0.41 were studied at room temperature and 80 K. Samples of bulk stain etched Si and Ge were also investigated. The composition of the porous material was determined using X-ray photoemission spectroscopy and Rutherford backscattering techniques to be considerably more Ge-rich than the starting epitaxial layers. While the luminescence intensity drops significantly with the increasing Ge fraction, we observe no significant variation in the PL wavelength at room temperature. This is clearly in contradiction to the popular model based on quantum confinement in crystalline silicon which predicts that the PL energy should follow the bandgap variation of the starting material. However, our data are consistent with small active units containing only a few Si atoms that are responsible for the light emission. Such units are present in many compounds proposed in the literature as the cause of the visible PL in porous Si.

Ksendzov, A.↗
DOE OSTI2025

Manufacturing Li 2 TiO 3 -based tritium breeder materials by volume-controlled spark plasma sintering with an optimized microstructure

Multifunctional ceramic breeder materials are highly desirable for the deuterium-tritium fusion to achieve high efficiency in breeding tritium through neutron irradiation of lithium-containing blankets. Li 2 TiO 3 displays unique attributes as a potential ceramic breeder material. An optimized microstructure with three-dimensional interconnected pore structure is required for rapid transport of the tritium for effective fuel cycle, which however enviably results in the degradation of the thermal-mechanical properties of the breeding materials. In this work, nanocrystalline porous Li 2 TiO 3 ceramic pellets with controlled porosities of 14% and 20% are manufactured by volume-controlled spark plasma sintering. An optimized 3D interconnected pore structure is achieved consisting of both micro-sized pores and nano-sized pores embedded in nanocrystalline matrix, which could be beneficial to facilitate easy removal of bred T and He. Further, the 3D interconnected porous structure is well maintained upon isothermal annealing of the SPS-fabricated pellets at relevant operation temperature of the solid breeding materials. Single-phasic porous pellets also display enhanced thermal-mechanical properties, superior to current state-of-the-art materials which establish their potential as a promising tritium breeder material for nuclear fusion applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Stabilization of Miscible Aqueous Phases via Diffusion‐Controlled Multifunctional Nanoparticle‐Ligand Complexation

Liquid‐in‐liquid structuring by harnessing miscible aqueous domains can be achieved by inducing thermodynamically defined phase separation using aqueous solutions of incompatible solutes, where immiscibility is dictated by the concentrations of the solutes. For instance, in aqueous two‐phase systems (ATPSs), the interfacial tension between the two different aqueous solutions is so small that it stabilizes the phase‐separated domains, but not their shape, thus falling short of designing tunable, robust structures. Here, we introduce a diffusion‐controlled strategy that enables liquid‐in‐liquid compartmentalization absent a thermodynamically defined interface or bulk liquid‐liquid phase separation using a barrier formed in situ at the initial contact boundary of an aqueous dispersion of multifunctional nanoparticles and a solution of multifunctional ligands in pure water or a water/alcohol mixture. The nanoparticles and ligands are entropically driven to disperse uniformly but interact at the initial contact boundary more rapidly than bulk mixing, forming a layer that establishes a barrier akin to a semi‐permeable membrane and allows the formation of tubular compartments. A wealth of opportunities is enabled by the proposed technique, where examples in separations, soft electronic devices, and ultralight porous electromagnetic shielding materials are shown.

cryogels↗
DOE OSTI2022

Effects of Temperature on Flow Fouling of Smooth and Nonwetting Surfaces

Mineral fouling (scaling) of heat transfer surfaces is a pervasive problem in heat exchangers, chemical reactors, and other equipment in energy, environmental, and process industrial applications. Many of the applications involve dynamic flow of fluids with the impurity minerals and, furthermore, operate at elevated temperature. Strategies to mitigate fouling under these conditions are of much value in industrial applications. This paper presents a comparative study of temperature-dependent mineral fouling deposition on smooth surfaces and nonwetting superhydrophobic and lubricant-infused surfaces under dynamic flow conditions. The surfaces are represented in a unified manner using the viscosity ratio of the infused material within the porous asperities on a surface to that of the flowing fluid such that the spectrum of surfaces from superhydrophobic to smooth is captured by the range of viscosity ratios from 0 to ∞. Using a forced convection experimental setup, deposition of calcium sulfate on the surfaces is quantified in terms of asymptotic fouling resistance over a range of temperature, Reynolds number, and mineral foulant supersaturation. Through a systematic set of accelerated fouling experiments, an empirical relationship for the asymptotic fouling resistance is developed in terms of Reynolds number, foulant concentration, temperature, and surface type. The empirical model is validated with a comprehensive set of experimental data from this study as well as from the literature. Optimum nonwetting surface designs for minimizing fouling resistance compared to conventional smooth surfaces are developed as a function of temperature. The results of the study offer insight into the temperature-dependent fouling of surfaces under flow conditions and a rational design of fouling-resistant nonwetting surfaces that can be readily translated to practice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Organophosphorus Binding Thermodynamics in Metal–Organic Frameworks: Interplay between Oxidation State, Lewis Acidity, and Node Structure

Organophosphorus compounds, including nerve agents and pesticides, represent a class of toxic chemicals causing harm to troops, civilians, and the environment. Metal–organic frameworks (MOFs) have emerged as a class of highly porous, crystalline, tunable materials adept at both capturing and catalytically neutralizing these harmful toxins. In particular, MOFs whose nodes display strong Lewis acidic character can hydrolyze such chemicals nearly instantaneously. However, without the help of a basic buffer to regenerate the active site, the benign organophosphorus product strongly binds to the node and prevents catalyst turnover. Here, we investigate a series of MOFs whose nodes contain metals of varying Lewis acidities and employ isothermal titration calorimetry (ITC) to directly measure the heat from the binding of an organophosphorus probe molecule, allowing the construction of a full thermodynamic binding profile (ΔH, ΔS, ΔG, K a ). We couple this with potentiometric titrations and solid state 31 P magic angle spinning (MAS) NMR to gain a clearer picture of how node identity, structure, and Lewis acidity interplay to impact binding strength and favorability. Furthermore, this study is the first to integrate these three complementary techniques to investigate binding interactions in MOFs, further showcasing the viability of ITC for probing MOF systems, which is still relatively underexplored.

Lewis acidity↗
DOE OSTI2026

Impact of Interposer Microstructure on Ionic Transport in Liquid-Phase Bicarbonate Electrolysis

The electrochemical reduction of CO 2 (CO 2 RR) is a potentially scalable approach for converting captured carbon dioxide into value-added products. Conventional gas-phase electrolysis systems can suffer from carbonate crossover, which limits the efficiency of the system. Liquid-phase (bi)carbonate electrolysis using bipolar membrane electrode assemblies (BPMMEA) has emerged as a promising alternative. The interposer layer, a porous mass-transport material between the BPM and the catalyst, is an essential component of the MEA, as it allows evolved CO 2 to reach the catalyst surface for reaction. In the absence of this layer, evolved CO 2 generated by the pH swing process at the BPM can be converted back into (bi)carbonate (CO 2 recapture) due to the high bulk pH. Thus, clear design guidelines are needed to maximize CO 2 conversion, minimize CO 2 recapture in the catholyte, and improve energy efficiency. Here, the transport properties of the interposer are systematically characterized by X-ray tomography and symmetric-cell impedance spectroscopy to quantify porosity, tortuosity, and the resulting MacMullin number. We then examine the correlation between these material properties and the electrolyzer performance. We focus on characterizing two commercial porous membrane filters, mixed cellulose ester (MCE) and poly(ether sulfone) (PES).

CO2 electrolysis↗
DOE OSTI2025

Machine learned potential for high-throughput phonon calculations of metal—organic frameworks

Metal–organic frameworks (MOFs) are highly porous and versatile materials studied extensively for applications such as carbon capture and water harvesting. However, computing phonon-mediated properties in MOFs, like thermal expansion and mechanical stability, remains challenging due to the large number of atoms per unit cell, making traditional Density Functional Theory (DFT) methods impractical for high-throughput screening. Recent advances in machine learning potentials have led to foundation atomistic models, such as MACE-MP-0, that accurately predict equilibrium structures but struggle with phonon properties of MOFs. In this work, we developed a workflow for computing phonons in MOFs within the quasi-harmonic approximation with a fine-tuned MACE model, MACE-MP-MOF0. The model was trained on a curated dataset of 127 representative and diverse MOFs. The fine-tuned MACE-MP-MOF0 improves the accuracy of phonon density of states and corrects the imaginary phonon modes of MACE-MP-0, enabling high-throughput phonon calculations with state-of-the-art precision. The model successfully predicts thermal expansion and bulk moduli in agreement with DFT and experimental data for several well-known MOFs. These results highlight the potential of MACE-MP-MOF0 in guiding MOF design for applications in energy storage and thermoelectrics.

Elena, Alin Marin↗
DOE OSTI2021

Synthesis, characterization, and polymerization of capped paddlewheel porous cages

Although paddlewheel-based structures are common among permanently porous metal–organic materials, suitable strategies for the isolation of metal node-terminated, capped paddlewheel-based cage structures remain limited. We explored the use of chelating dicarboxylate ligand derivates (esp) for the isolation of trimesate-linked cages, Mo 12 (btc) 4 (esp) 6 , that are structural analogs of the small octahedral pore of HKUST-1. The porosity of these novel cages is appreciably higher than that of previously reported structures of this type. We also demonstrate that pillaring the isolated cage with DABCO generated an amorphous polymer that featured exceptional thermal stability and enhanced porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Environmental cell for in situ X-ray synchrotron micro-CT imaging with simultaneous acoustic measurements

Synchrotron radiation provides the necessary spatial and temporal resolution for non-invasive operando studies of dynamic processes under complex environmental conditions. Here a new environmental cell for simultaneous in situ dynamic X-ray imaging and measuring acoustic properties of geological samples is presented. The primary purpose of this cell is to study gas-hydrate formation in porous geo-materials and its influence on their acoustic properties. The cell is designed for cylindrical samples of 9 mm in diameter, confining and pore pressures up to 12 MPa, and temperatures from –20°C to room temperature. The cell is portable and can be easily assembled and operated at different X-ray sources. This cell enables a wide range of experiments studying physical/chemical processes in the Earth subsurface that change the mechanical properties of rocks (geochemical reactions, phase transitions, etc.).

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Silicon-Based Anodes for Long-Cycle-Life Lithium-ion Batteries

CVD process has been studied and optimized to achieve 2x scale up of porous Si anode materials with a clean process. The roles of CVD temperature, duration, C 2 H 2 gas pressure, and carrier gas have been optimized. It is found that LHCE (LHCE-1 and LHCE-4) can lead to more than 50% increase in the cycling stability of Si||NMC622 cells. LHCE-4 can also lead to smaller impedance increase and longer calendar life when tested in single layer pouch cells. These results are very helpful in the understanding of the Si based anode and further development of Si based Li ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Molecular Scale Tuning of Covalent Organic Frameworks for Enhanced Properties

Covalent organic frameworks (COFs) are a type of porous, extended structure material which has demonstrated utility in numerous applications, including sensing and separations. Judicious choice of the linker and node not only fine tune the size of the framework, but also the functionality. We seek to tailor COF materials for applications in gas capture and electrochemical sensing. Herein, we demonstrate the material properties of COFs can be fine-tuned via post-synthetic metal cation doping of the parent structures. We have synthesized several COF structures with varying linkers which allow for the incorporation of metal cations. Structures incorporating Zn 2+ , Mn 2+ , and Cu 2+ have demonstrated utility in improving the CO 2 uptake properties of the COFs, while Ag + doped structures show potential as electrochemical sensors for chloride anions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dual Phase Membrane for CO2 Separation (Phase 1) (CRADA Final Report)

This was a collaborative effort between Lawrence Livermore National Security, LLC (LLNS), as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Saint-Gobain Ceramics & Plastics, Inc. (Participant/SG), to develop porous solid support materials for dual-phase carbon dioxide (CO2) separation membranes.

36 MATERIALS SCIENCE↗