Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

AFM CHARACTERIZATION OF LASER INDUCED DAMAGE ON CDZNTE CRYSTAL SURFACES

Semi-conducting CdZnTe (or CZT) crystals can be used in a variety of detector-type applications. CZT shows great promise for use as a gamma radiation spectrometer. However, its performance is adversely affected by point defects, structural and compositional heterogeneities within the crystals, such as twinning, pipes, grain boundaries (polycrystallinity), secondary phases and in some cases, damage caused by external forces. One example is damage that occurs during characterization of the surface by a laser during Raman spectroscopy. Even minimal laser power can cause Te enriched areas on the surface to appear. The Raman spectra resulting from measurements at moderate intensity laser power show large increases in peak intensity that is attributed to Te. Atomic Force Microscopy (AFM) was used to characterize the extent of damage to the CZT crystal surface following exposure to the Raman laser. AFM data reveal localized surface damage in the areas exposed to the Raman laser beam. The degree of surface damage to the crystal is dependent on the laser power, with the most observable damage occurring at high laser power. Moreover, intensity increases in the Te peaks of the Raman spectra are observed even at low laser power with little to no visible damage observed by AFM. AFM results also suggest that exposure to the same amount of laser power yields different amounts of surface damage depending on whether the exposed surface is the Te terminating face or the Cd terminating face of CZT.

36 MATERIALS SCIENCE↗

SiC-Based Miniature High-Temperature Cantilever Anemometer

The figure depicts a miniature cantilever-type anemometer that has been developed as a prototype of compact, relatively nonintrusive anemometers that can function at temperatures up to 600 C and that can be expected to be commercially mass-producible at low cost. The design of this anemometer, and especially the packaging aspect of the design, is intended to enable measurement of turbulence in the high-temperature, high-vibration environment of a turbine engine or in any similar environment. The main structural components of the anemometer include a single-crystal SiC cantilever and two polycrystalline SiC clamping plates, all made from chemical-vapor-deposited silicon carbide. Fabrication of these components from the same basic material eliminates thermal-expansion mismatch, which has introduced spurious thermomechanical stresses in cantilever-type anemometers of prior design. The clamping plates are heavily oxidized to improve electrical insulation at high temperature. A cavity that serves as a receptacle for the clamped end of the cantilever is etched into one end of one clamping plate. Trenches that collectively constitute a socket for a multipin electrical plug (for connection to external electronic circuitry) are etched into the opposite end of this clamping plate. Metal strips for electrical contact are deposited on one face of the other clamping plate. Piezoresistive single-crystal SiC thin-film strain gauges are etched in the n-type SiC epilayer in a Wheatstone-bridge configuration. Metal contact pads on the cantilever that extend into the clamping-receptacle area, are obtained by deposition and patterning using standard semiconductor photolithography and etching methods. The cantilever and the two clamping plates are assembled into a sandwich structure that is then clamped in a stainless-steel housing. The Wheatstone- bridge carrying SiC cantilever with the metal contact pads on the piezoresistors is slid into the receptacle in the bottom clamping plate. The top clamping plate is brought into contact with the bottom plate so that the narrow section of the metal strips on the top clamp plate aligns with the metal contact pads on the cantilever. When the parts are clamped together, the metal strips provide electrical connections between the Wheatstone-bridge contact points and the sides the trenches that constitute the socket for the multipin electrical plug. Hence, to connect the Wheatstone bridge to external circuitry for processing of the anemometer readout, one need only insert the plug in the socket. In operation, the cantilever end of the stainless-steel housing is mounted flush with an engine wall and the unclamped portion of the cantilever is exposed into the flow. The cantilever is deflected in direct proportion to the force induced by component of flow parallel to the engine wall and perpendicular to the broad exposed face of the cantilever. The maximum strain on the cantilever occurs at the clamped edge and is measured by the piezoresistors, which are located there. The corresponding changes in resistance manifest themselves in the output of the Wheatstone bridge.

Okojie, Robert S.↗

Growth of Ca{sub 2}MnO{sub 4} Ruddlesden-Popper structured thin films using combinatorial substrate epitaxy

The local epitaxial growth of pulsed laser deposited Ca{sub 2}MnO{sub 4} films on polycrystalline spark plasma sintered Sr{sub 2}TiO{sub 4} substrates was investigated to determine phase formation and preferred epitaxial orientation relationships (ORs) for isostructural Ruddlesden-Popper (RP) heteroepitaxy, further developing the high-throughput synthetic approach called Combinatorial Substrate Epitaxy (CSE). Both grazing incidence X-ray diffraction and electron backscatter diffraction patterns of the film and substrate were indexable as single-phase RP-structured compounds. The optimal growth temperature (between 650 °C and 800 °C) was found to be 750 °C using the maximum value of the average image quality of the backscattered diffraction patterns. Films grew in a grain-over-grain pattern such that each Ca{sub 2}MnO{sub 4} grain had a single OR with the Sr{sub 2}TiO{sub 4} grain on which it grew. Three primary ORs described 47 out of 49 grain pairs that covered nearly all of RP orientation space. The first OR, found for 20 of the 49, was the expected RP unit-cell over RP unit-cell OR, expressed as [100][001]{sub film}||[100][001]{sub sub}. The other two ORs were essentially rotated from the first by 90°, with one (observed for 17 of 49 pairs) being rotated about the [100] and the other (observed for 10 of 49 pairs) being rotated about the [110] (and not exactly by 90°). These results indicate that only a small number of ORs are needed to describe isostructural RP heteroepitaxy and further demonstrate the potential of CSE in the design and growth of a wide range of complex functional oxides.

36 MATERIALS SCIENCE↗

Annealing effect on the magnetic induced austenite transformation in polycrystalline freestanding Ni-Co-Mn-In films produced by co-sputtering

Ni-Co-Mn-In freestanding films, with a magneto-structural transformation at room temperature were successfully produced by co-sputtering and post-annealing methods leading to film composition mastering. For a post-annealing temperature of 700 °C, the phase transformation occurs slightly above room temperature, with a twisted martensitic microstructure phase observed at 300 K by Field Emission Scanning Electron Microscopy. Magnetization measurements on a polycrystalline film showed a phase transformation from a weakly magnetic martensite to a magnetic austenite phase. Moreover, an inverse magnetocaloric effect with an entropy variation of 4 J/kg K under 5 T was also measured. A simple magneto-actuation experiment based on the magnetic induced austenite transformation was also successfully completed. The possibility to insert such films in microsystems is clearly demonstrated in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Possibility of the use of intermediate carbidsiliconoxide nanolayers on polydiamond substrates for gallium nitride layers epitaxy

The results of using carbidsiliconoxide (a-C:SiO1{sub .5}) films with a thickness of 30–60 nm, produced by the pyrolysis annealing of oligomethylsilseskvioksana (CH{sub 3}–SiO{sub 1.5}){sub n} with cyclolinear (staircased) molecular structure, as intermediate films in the hydride vapor phase epitaxy of gallium nitride on polycrystalline CVD-diamond substrates are presented. In the pyrolysis annealing of (CH{sub 3}–SiO{sub 1.5}){sub n} films in an atmosphere of nitrogen at a temperature of 1060°C, methyl radicals are carbonized to yield carbon atoms chemically bound to silicon. In turn, these atoms form a SiC monolayer on the surface of a-C:SiO{sub 1.5} films via covalent bonding with silicon. It is shown that GaN islands grow on such an intermediate layer on CVD-polydiamond substrates in the process of hydride vapor phase epitaxy in a vertical reactor from the GaCl–NH{sub 3}–N{sub 2} gas mixture.

36 MATERIALS SCIENCE↗

Structural, microstructural and vibrational analyses of the monoclinic tungstate BiLuWO{sub 6}

The bismuth lutetium tungstate phase BiLuWO{sub 6} has been prepared using a solid state route with stoichiometric mixtures of oxide precursors. The obtained polycrystalline phase has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. In the first step, the crystal structure has been refined using Rietveld method: the crystal cell was resolved using monoclinic system (parameters a, b, c, β) with space group A2/m. SEM images showed the presence of large crystallites with a constant local nominal composition (BiLuW). TEM analyses showed that the actual local structure could be better represented by a superlattice (a, 2b, c, β) associated with space groups P2 or P2/m. The Raman spectroscopy showed the presence of vibrational bands similar to those observed in the compounds BiREWO{sub 6} with RE=Y, Gd, Nd. However, these vibrational bands were characterized by large full width at half maximum, probably resulting from the long range Bi/Lu disorder and local WO{sub 6} octahedron distortions in the structure. - Graphical abstract: The average structure of BiLuWO{sub 6} determined from X-ray diffraction data can be represented by A2/m space group. Experimental Electron Diffraction patterns along the [0vw] zone axes of the monoclinic structure and associated simulated patterns show the existence of a monoclinic superstructure with space group P2 or P2/m. - Highlights: • A new monoclinic BiLuWO{sub 6} phase has been elaborated from solid-state reaction. • The space group of the monoclinic disordered average structure should be A2/m. • Transmission electron microscopy leads to a superlattice with P2/m space group. • Raman spectroscopy suggests existence of local disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonicosahedral boron allotrope synthesized at high pressure and high temperature

Theoretical predictions of pressure-induced phase transformations often become long-standing enigmas because of limitations of contemporary available experimental possibilities. Hitherto the existence of a nonicosahedral boron allotrope has been one of them. Here we report on a nonicosahedral boron allotrope, which we denoted as ζ -B, with the orthorhombic α-Ga-type structure (space group Cmce) synthesized in a diamond-anvil cell at extreme high-pressure high-temperature conditions (115 GPa and 2100 K). The structure of ζ -B was solved using single-crystal synchrotron x-ray diffraction and its compressional behavior was studied in the range of very high pressures (115–135 GPa). Here,experimental validation of theoretical predictions reveals the degree of our up-to-date comprehension of condensed matter and promotes further development of solid-state physics and chemistry.

36 MATERIALS SCIENCE↗

Crystal c-axis mapping of hcp metals by conventional reflected polarized light microscopy: Application to untextured and textured cp-Titanium

Highlights: • A computer-aided methodology based on reflected PLM was developed for c-axis orientation mapping of hcp structures. • The methodology was applied to two alpha cp-Ti bulk samples with different texture characteristics. • Calibration and validation of the methodology were performed by using EBSD. - Abstract: Nowadays the crystallographic characterization of polycrystalline metals and metallic alloys is usually performed by means of the electron backscatter diffraction (EBSD) technique. However, when dealing with coarse structures presenting intrinsic optical anisotropy, polarized light microscopy (PLM) imaging might be an alternative or a complementary time-efficient technique. Accordingly, a new computer-aided methodology has been developed in the present study and successfully applied on the crystal c-axis characterization of a hexagonal close-packed (hcp) structure, alpha commercial pure-Titanium (cp-Ti). In this sense, the correlation between EBSD-based crystallographic parameters and PLM-based parameters under certain light microscope settings has been first established by direct comparison using a representative amount of random orientations. Finally, PLM-based c-axis mapping and subsequent c-axis texture plotting have been performed and validated with EBSD for untextured and textured cp-Ti.

36 MATERIALS SCIENCE↗

Ferrimagnetic Order in Tetragonal Antiperovskite Mn3GeN

The crystal and magnetic structures of the nitride antiperovskite M⁢n3⁢GeN reveals ferrimagnetic order stemming from a distorted kagome-derived lattice of the Mn atoms. Polycrystalline M⁢n3⁢GeN was synthesized via a solid-state reaction and characterized using neutron powder diffraction, dc magnetometry, and first-principles calculations. Rietveld refinement reveals near-stoichiometric composition (M⁢n3⁢Ge⁢N0.992⁢(7)) adopting a tetragonal 𝐼⁢4/𝑚⁢𝑐⁢𝑚 structure at 𝑇=500K and below, featuring axially distorted and tilted [NM⁢n6] octahedra that result in a buckled Mn kagome lattice. On heating, the tetragonal distortion and octahedral tilt angle decrease continuously before transitioning to the cubic 𝑃⁢𝑚⁢3⁢𝑚 antiperovskite phase at 𝑇≈527K. Neutron diffraction and magnetometry together reveal noncollinear ferrimagnetic ordering. For 30K≤𝑇≤500K, the magnetic structure is described by magnetic space group 𝐼⁢𝑏⁢𝑎′⁢𝑚′ (72.544), with inequivalent Mn1 and Mn2 sublattices that couple antiferromagnetically to yield a net moment. Density-functional theory-based calculations show that the different local moments originate from the bandwidths associated with distinct Mn–N bond lengths. Temperature-dependent refinements reveal distinct differences in the thermal disordering profiles of the Mn1 and Mn2 sublattices. These findings reveal a subtlety in the magnetic and structural behavior of M⁢n3⁢GeN, highlighting the interplay between structural distortions, magnetic ordering, and electronic structure in kagome-derived antiperovskite materials.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of nickel antimony ferrospinels

Spinel-type compounds of Fe–Ni–Sb–O system were synthesized as polycrystalline powders. The crystal and magnetic properties were investigated using X-ray and neutron powder diffraction, Mössbauer and X-ray absorption spectroscopy and magnetization measurements. The samples crystallize in the cubic system, space group Fd – 3 m. The distribution of cations between octahedral and tetrahedral sites was refined from the diffraction data sets using constraints imposed by the magnetic, Mössbauer and EDS results and the ionic radii. The cation distribution and the temperature dependence of the lattice parameter (a) and the oxygen positional parameter (u) were obtained. A chemical formula close to Fe0.8Ni1.8Sb0.4O4 was determined, with Sb5+ cations occupying octahedral sites, and Fe3+ and Ni2+ occupying both tetrahedral and octahedral sites. Fe3+ mainly (85/15 ratio) occupy tetrahedral sites, and conversely Ni2+ mainly reside on octahedral ones. The magnetic unit cell is the same as the crystallographic one, having identical symmetry relations. The results indicate that the compounds have a collinear ferrimagnetic structure with antiferromagnetic coupling between the tetrahedral (A) and octahedral (B) sites. Uniquely, the temperature dependence of the net magnetization of this rare earth free ferrimagnet exhibits a compensation point.

Crystal structure↗

Electrical and optical properties of low-bandgap oxide Zn 2 Mo 3 O 8 for optoelectronic applications

Semiconducting metal oxides are attractive for various applications since most oxides are non-toxic, stable, and easy to deposit. Wide band-gap materials have been studied more extensively, compared to low bandgap materials, which introduces limitations to the applications of oxides. Study of low band-gap semiconducting oxides can propel the usage of oxides in a wider range of applications. The electronic, structural, and optical properties of Zn 2 Mo 3 O 8 (ZMO) are investigated. Stoichiometric polycrystalline films of ZMO are deposited using pulsed laser deposition system at room temperature. The unintentionally n-doped films show a hall electron mobility of 0.7 cm 2 V -1 s -1 and have a bandgap of 2.1 eV. The photoelectron spectra contain complex peak profiles which are explained to be a manifestation of final state effects. The orbital contribution to the valence band of ZMO is probed using resonant photoelectron spectroscopy, which confirms that the valence band is composed of Mo 4d levels. The conduction and valence band edges are predicted to be at 4.2 eV and 6.3 eV, so most of the conventional wide band-gap oxides can be used as hole-blocking layers with ZMO. Under A.M. 1.5 illumination, single-sided Schottky diode with Fluorine-doped tin oxide/TiO 2 /ZMO/Au structure shows no photovoltaic action, possibly due to high exciton binding energy and low carrier drift lengths. However, the Schottky device shows a higher current under illumination, which suggests that with improvement in carrier drift lengths, ZMO can find applications in low-cost optoelectronic devices on flexible substrates like plastic or Polyethylene terephthalate.

36 MATERIALS SCIENCE↗

Electrical/thermal transport and electronic structure of the binary cobalt pnictides CoPn{sub 2} (Pn = As and Sb)

We demonstrate the electrical and thermal transport properties of polycrystalline CoPn{sub 2} (Pn = As and Sb) between 300 and 900 K. CoAs{sub 2} shows semiconducting electrical transport up to 900 K, while CoSb{sub 2} exhibits degenerate conduction. Sign inversion of the Seebeck coefficient is observed at ∼310 and ∼400 K for CoAs{sub 2} and CoSb{sub 2}, respectively. Thermal conductivity at 300 K is 11.7 Wm{sup −1}K{sup −1} for CoAs{sub 2} and 9.4 Wm{sup −1}K{sup −1} for CoSb{sub 2}. The thermoelectric power factor of CoAs{sub 2} is ∼10 μWcm{sup −1}K{sup −2}, although the dimensionless figure of merit is limited to ∼0.1 due to relatively high thermal conductivity. Using electronic structure calculations, the band gap value is calculated to be 0.55 eV for CoAs{sub 2} and 0.26 eV for CoSb{sub 2}.

36 MATERIALS SCIENCE↗

Mechanism for the formation of tin oxide nanoparticles and nanowires inside the mesopores of SBA-15

The formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. HR-TEM and XRD revealed that during the thermal treatment in air 5 nm tin oxide NP with well defined Cassiterite structure were formed inside the SBA-15 matrix mesopores at 250 deg. C. After air calcination at 700 deg. C the NP assembled inside the SBA-15 mesopores as polycrystalline nanorods with different orientation of atomic layers in jointed nanocrystals. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP at low temperature. The pure tin chloride heated in air at 250 deg. C did not react with oxygen to yield tin oxide. Tin oxide NP were also formed during the thermal treatment of the tin chloride loaded SBA-15 in helium atmosphere at 250 deg. C. Hence, it is well evident that silanols present in the silica matrix not only increase the wetting of tin chloride over the surface of SBA-15 favoring its penetration to the matrix pores, but also react with hydrated tin chloride according to the proposed scheme to give tin oxide inside the mesopores. It was confirmed by XRD, N{sub 2}-adsorption, TGA-DSC and FTIR spectra. This phenomenon was further corroborated by detecting the inhibition of SnO{sub 2} NP formation at 250 deg. C after inserting the tin precursor to SBA-15 with reduced silanols concentration partially grafted with tin chloride. - Graphical abstract: The mechanism of formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP during thermal treatment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, microstructural and surface properties of a specific CeO{sub 2}-Bi{sub 2}O{sub 3} multiphase system obtained at 600 {sup o}C

Polycrystalline samples of (1-x) CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 {sup o}C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0{<=}x{<=}0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T' (or {beta}') and T (or {beta}) tetragonal phases, similar to the well-known {beta}' or {beta} Bi{sub 2}O{sub 3} metastable structural varieties, are observed. However, the crystal cell volumes of these {beta}' or {beta} Bi{sub 2}O{sub 3} phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH{sub 4} and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH{sub 4} and CO gases into the CO{sub 2} gas. The transformations of CH{sub 4} and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO{sub 2} absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH{sub 4} gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows. -- Graphical abstract: Catalytic efficiencies of CeO{sub 2}-Bi{sub 2}O{sub 3}system: catalytic actions on methane (on the left) or carbon monoxide (on the right) of (1-x)CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} samples, as a function of the fraction x, and for fixed temperatures: on the vertical axis, the intensities of CO{sub 2} FTIR absorption bands are reported. Strong efficiency of bismuth rich samples for CO conversion. Display Omitted Research highlights: {yields} Stabilization of metastable polymorph Bi{sub 2}O{sub 3} phases in the mix system [(1-x)CeO{sub 2}+(x/2)Bi{sub 2}O{sub 3}] at 600 {sup o}C. {yields} Solid gas interactions between this system and air-CO or air-CH{sub 4} gas flows at various temperatures and bismuth compositions. {yields} High efficiency of bismuth rich samples to convert CO into CO{sub 2}.

36 MATERIALS SCIENCE↗

Deposition pressure dependent structural and optoelectronic properties of ex-situ boron-doped poly-Si/SiO x passivating contacts based on sputtered silicon

Among common methods to form polycrystalline silicon (poly-Si) films for passivating-contact solar cells, physical vapor deposition, in particular sputtering, is the safest one as it does not require any toxic gaseous precursors. One of the critical parameters to control the properties of sputtered silicon films is their deposition pressure. In this work, structural and optoelectronic characteristics of ex-situ boron-doped poly-Si/SiO x passivating contacts, formed from sputtered intrinsic amorphous silicon (a-Si) deposited at different pressures on top of SiO x /c-Si substrates and subjected to a high-temperature boron diffusion step, are investigated. The deposition rate and density of the as-deposited a-Si films increase with reducing pressure. Low-temperature photoluminescence spectra captured from the as-deposited samples at different pressures do not show typical emissions from hydrogenated a-Si. Meanwhile, their Fourier-transform infrared absorption spectra all show Si–H stretching modes, indicating that hydrogen had been initially incorporated into the chemical SiO x layers and eventually hydrogenated the a-Si/SiO x interfaces during the sputtering process. After the high-temperature boron-diffusion step, all hydrogen-related peaks disappear. Lower pressure films (1.5 and 2.5 mTorr) show more consistent improved performance after hydrogen treatments, compared to higher pressure films (4 and 5 mTorr). Overall, the resultant passivating contacts at 2.5 mTorr achieve a low single-side recombination current density Jo of ~9 fA/cm 2 , whereas their contact resistivity is still low at 15 mO cm 2 .

14 SOLAR ENERGY↗

Slip delocalization and diffusion mediated carbide formation during fatigue of a nickel-base superalloy

Fatigue crack initiation at high temperatures occurs at microscopic fatigue shear bands that form near twin boundaries in polycrystalline nickel-base superalloys that contain minimal metallurgical defects. The associated dislocation sub-structure is complex and dependent on thermal and mechanical conditions. Here we show the formation of fine-scale carbide precipitates along these fatigue shear bands in a nickel-base superalloy during fatigue above 650 °C. The formation of carbide precipitates is studied using calculations of bulk and pipe diffusion. The contribution of pipe diffusion is observed to be critical in the formation of fine-scale carbides and occurs coincident with the delocalization of slip during fatigue.

36 MATERIALS SCIENCE↗

Parasitic structure defect blights sustainability of cobalt-free single crystalline cathodes

Abstract Recent efforts to reduce battery costs and enhance sustainability have focused on eliminating Cobalt (Co) from cathode materials. While Co-free designs have shown notable success in polycrystalline cathodes, their impact on single crystalline (SC) cathodes remains less understood due to the significantly extended lithium diffusion pathways and the higher-temperature synthesis involved. Here, we reveal that removing Co from SC cathodes is structurally and electrochemically unfavorable, exhibiting unusual voltage fade behavior. Using multiscale diffraction and imaging techniques, we identify lithium-rich nanodomains (LRNDs) as a heterogeneous phase within the layered structure of Co-free SC cathodes. These LRNDs act as critical tipping points, inducing significant chemo-mechanical lattice strain and irreversible structural degradation, which exacerbates the voltage and capacity loss in electrochemical performance. Our findings highlight the considerable challenges of developing Co-free SC cathodes compared to polycrystalline ones and emphasize the need for new strategies to balance the interplay between cost, sustainability, and performance.

36 MATERIALS SCIENCE↗

Electronic and transport properties of polycrystalline Ba{sub 8}Ga{sub 15}Ge{sub 31} type I clathrate prepared by SPS method

Samples of germanium Ba{sub 8}Ga{sub 15}Ge{sub 31} clathrate of type I were prepared using standard metallurgy methods. The structure, microstructure and phase composition of the prepared samples were analyzed by powder X-ray diffraction XRD and scanning electron microscope SEM combined with energy dispersive X-ray analysis EDX. Scanning thermoelectric microprobe STMP was used to characterize uniformity of Seebeck coefficient distribution at different stages of the material synthesis in order to optimize the synthesis method. Electrical conductivity, Seebeck coefficient and thermal conductivity were measured in the temperature range 20-450 Degree-Sign C. Based on the measured electrical properties and Hall carrier concentration n=5-9{center_dot}10{sup 20} cm{sup -3} at room temperature, electron effective mass m{sup Low-Asterisk} was estimated to be between 2.1-3 m{sub 0}. Preliminary FP-LAPW DFT calculations were performed for two chosen high symmetry superstructures Ba{sub 8}Ga{sub 16}Ge{sub 30} and Ba{sub 8}Ga{sub 6}Ge{sub 40} by means of WIEN2K package. Additionally topological analysis of total electron density according to Bader's Quantum Theory of Atoms in Molecules was carried out. The energy band gaps were calculated to be 0.3 eV for Ba{sub 8}Ga{sub 16}Ge{sub 30} and 0.38 eV for Ba{sub 8}Ga{sub 6}Ge{sub 40} which was close to the experimental results for Ba{sub 8}Ga{sub 16}Ge{sub 30}. The observed electrical properties were compared with the electronic band structure calculations, showing good qualitative correlation between the measured transport properties and the theoretical predictions. - Graphical abstract: Scanning thermoelectric microprobe STMP was used to investigate uniformity of the prepared polycrystalline Ba{sub 8}Ga{sub 15}Ge{sub 31} clathrate samples at different synthesis stages. Maps and histograms of the Seebeck coefficient distribution (presented in the picture) for Ba{sub 8}Ga{sub 15}Ge{sub 31} ingot after the first synthesis stage showed it is not uniform. The Seebeck coefficient distribution in the ingot was bimodal. The same analysis for the sample after annealing and sintering showed that the Seebeck coefficient distribution is unimodal. Compared to the ingot from I synthesis stage a significant improvement of material uniformity was observed. Highlights: Black-Right-Pointing-Pointer Scanning thermoelectric microprobe STMP measurements show important uniformity change during sample annealing. Black-Right-Pointing-Pointer Calculated band gap E{sub g} values are close to the reported E{sub g}. Black-Right-Pointing-Pointer Ga/Ge ratio change doesn't affect significantly the bonding properties. Black-Right-Pointing-Pointer Band structure calculations show that bond's character agrees with the Zintl concept.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗