Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Single- and Double-Site Substitutions in Mixed-Metal Oxides: Adjusting the Band Edges Toward the Water Redox Couples

New mixed-metal oxide solid solutions, i.e., the single-metal substituted Na 2 Ta 4–y Nb y O 11 (0 ≤ y ≤ 4) and the double-metal substituted Na 2–2x Sn x Ta 4–y Nb y O 11 (0 ≤ y ≤ 4; 0 ≤ x ≤ 0.35), were investigated and used to probe the impact of composition on their crystalline structures, optical band gaps, band energies, and photocatalytic properties. The Na 2 Ta 4 O 11 (y = 1) phase was prepared by flux-mediated synthesis, while the members of the Na 2 Ta 4–y Nb y O 11 solid solution (1 ≤ y ≤ 4) were prepared by traditional high-temperature reactions. The Sn(II)-containing Na 2–2x Sn x Ta 4–y Nb y O 11 (0 ≤ y ≤ 4) solid solutions were prepared by flux-mediated ion-exchange reactions of the Na 2 Ta 4–y Nb y O 11 solid solutions within a SnCl 2 flux. The crystalline structures of both solid solutions are based on the parent Na 2 B 4 O 11 (B = Nb, Ta) phases and consist of layers of edge-shared BO 7 pentagonal bipyramids that alternate with layers of isolated BO 6 octahedra surrounded by Na(I) cations. Rietveld refinements of the Na 2 Ta 4–y Nb y O 11 solid solution showed that Nb(V) cations were disordered equally over both the BO 7 and BO 6 atomic sites, with a symmetry-lowering distortion from R$\overline{3c}$ to C2/c occurring at ~67–75% Nb (y = ~2.7–3.0). A red-shift in the optical band gaps from ~4.3 to ~3.6 eV is observed owing to a new conduction band edge that arises from the introduction of the lower-energy Nb 4d-orbitals. Reactions of these phases within a SnCl 2 flux yielded the new Na 2–2x Sn x Ta 4–y Nb y O 11 solid solution with Sn-content varying from ~11% to ~21%. However, significant red-shifting of the band gap is found with increasing Nb-content, down to ~2.3 eV for Na 1.4 Sn 0.3 Nb 4 O 11 , because of the higher energy valence band edge upon incorporation of Sn(II) into the structure. Aqueous suspensions of the particles irradiated at ultraviolet–visible energies yielded the highest photocatalytic hydrogen production rates for Na 1.3 Sn 0.35 Ta 1.2 Nb 2.8 O 11 (~124 μmol H 2 ·g –1 ·h –1 ) and Na 1.4 Sn 0.3 Ta 3 NbO 11 (~105 μmol H 2 ·g –1 ·h –1 ), i.e., for the compositions with the highest Sn(II)-content. Further, polycrystalline films show n-type anodic photocurrents under ultraviolet–visible light irradiation. These results show that the valence and conduction band energies can be raised and lowered, respectively, using single-metal and double-metal substituted solid solutions. Furthermore, a novel approach is revealed for achieving smaller visible-light bandgap sizes and a closer bracketing of the water redox couples in order to drive total water splitting reactions that are critical for efficient solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How Should Iron and Titanium be Combined in Oxides to Improve Photoelectrochemical Properties?

We discuss here for the first time how to combine iron and titanium metal ions to achieve a high photo-electrochemical activity for TiO 2 -based photo-anodes in water splitting devices. To do so, a wide range of photoelectrode materials with tailored Ti/Fe ratio and element vicinity were synthesized by using the versatility of aqueous sol–gel chemistry in combination with a microwave-assisted crystallization process. At low ferric concentrations, single phase TiO 2 anatase doped with various Fe amounts were prepared. Strikingly, at higher ferric concentrations, we observed the concomitant crystallization of two polymorphs of Fe 2 TiO 5 . The as-synthesized compounds were tested as photoelectrode and compared with pure nanoparticles of TiO 2 , Fe 2 TiO 5 and α- or γ-Fe 2 O 3 and with corresponding nanocomposites. When TiO 2 is slightly doped by Fe, the performance of this photo-electrode improves particularly in the low-bias region (< 1.0 V vs. reversible hydrogen electrode.) The photoanode exhibits a higher photocurrent than nanocomposite with TiO 2 /Fe 2 O 3 and FeTi 2 O 5 , and more cathodic onset potential. The former can be partly explained by a lower bandgap and a hole with a longer lifetime. For the latter, we propose that the nature of the heterojunction impacts charge carrier recombination. Here, the results presented herein not only answer whether iron and titanium should be combined in the same structure or into heterostructured systems, but also on the importance of the arrangement of ions in the structure to improve the performances of the photoanode.

"chimie-douce"↗

Giant Bulk Photovoltaic Effect in Vinylene-Linked Hybrid Heterocyclic Polymer

The bulk photovoltaic effect refers to the generation of a steady photocurrent from a homogeneous noncentrosymmetric material. It offers an alternative to the traditional p–n junction-based photovoltaic mechanism to directly convert sunlight to electricity. In this work, we investigate the bulk photovoltaic effect in low-dimensional polar organic materials with first-principles density functional theory calculations and shift current theory. With a strategy designed to break the inversion symmetry along the polymer chain, we demonstrate that conjugated vinylene-linked hybrid heterocyclic polymers can produce a strong bulk photovoltaic response to light, outperforming benchmark inorganic materials. The high current density results from the delocalized wave functions, composed mainly of carbon p orbitals. The great structural and electronic flexibility of polymers offers a robust paradigm to enhance the shift current response through chemical and physical modifications. The development of polymer blends with polymers of different band gaps potentially enables the utilization of the whole visible light spectrum for energy conversion.

14 SOLAR ENERGY↗

Wide Band Gap CuGa(S,Se) 2 Thin Films on Transparent Conductive Fluorinated Tin Oxide Substrates as Photocathode Candidates for Tandem Water Splitting Devices

Theaim of this report was to explore the potential of CuGa(S,Se)2 thin films as wide-E G top cell absorbers for photoelectrochemical (PEC) water splitting. A synthesis was developed on fluorinated tin oxide (FTO) photocathodes by converting copper-rich co-evaporated CuGaSe2 into CuGa(S,Se)2 via a post-deposition annealing. We found it necessary to first anneal CuGaSe2 at low-temperature in sulfur then at high-temperature in nitrogen to preserve the transparency and conductivity of the FTO. Using this two-step synthesis, we fabricated a 1.72eV CuGa(S,Se) 2 photocathode with a saturation current density and photocurrent onset potential of 10mA/cm 2 and -0.20V vs. RHE, respectively. Yet we found that the PEC performance and sub-E G transmittance, worsened with increasing copper content. Using flatband potential measurements and the Gerischer model, we show that divergences in PEC performance of CuGa(S,Se) 2 photocathodes can be explained by differences in conduction band minimums and Fermi levels. We also explain that sub-E G transmittance is likely hampered by a defect band 100-400 meV below E C . Additional external quantum efficiency measurements of a high-efficiency 1.1 eV Cu(In,Ga)Se 2 photovoltaic driver, while shaded by the CuGa(S,Se) 2 photocathode, yielded a short-circuit current density of 4.14 mA/cm 2 revealing that CuGa(S,Se) 2 reflects promise as a top cell for PEC water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction–Transport Coupling in a Nanostructured Porous Electrode

The function of nanoporous electrodes involves chemical reactions coupled to transport of reactants and products into and out of the solid matrix. To understand how this coupling can depend on electrode structure and chemistry, a general multiscale, molecular-level computational framework is introduced and applied to a model system containing a nanoporous photoanode, the dye-sensitized solar cell. The pore structure and electrolyte composition are systematically varied to probe this coupling, revealing that in most cases the photocurrent density depends on dye coverage within the anode matrix, the specific architecture of an individual pore, and electrolyte gradients in between the anode and cathode. The large electrolyte gradients that develop in the anode are not kinetically controlling. In conclusion, the computational framework demonstrated is general and can be applied to other electrochemical, photochemical, and thermally driven nanoporous systems to evaluate the fundamental characteristics of their function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light-Controlled Nanoparticle Collision Experiments

Electrochemical monitoring of catalytically amplified collisions of individual metal nanoparticles (NP) with ultramicroelectrodes (UME) has been extensively used to study electrocatalysis, mass-transport, and charge-transfer processes at the single NP level. More recently, photoelectrochemical collision experiments were carried out with semiconductive NPs. Here we introduce two new types of light-controlled nano-impact experiments. The first experiment involves localized photodeposition of catalyst (Pt) on TiO 2 NPs with a glass-sheathed carbon fiber simultaneously serving as the light guide and collector UME. The collisions of in situ prepared Pt@TiO 2 NPs with the carbon surface produced blips of water oxidation current, while the activity of pristine TiO 2 NPs was too low to yield measurable signal. In another experiment, collisions of catalytic (Ir oxide) NPs with the semiconductor (Nb doped n-type TiO 2 rutile single crystal) electrode are monitored by measuring the photocurrent of water oxidation.

14 SOLAR ENERGY↗

The Fast-Track Water Oxidation Channel on BiVO 4 Opened by Nitrogen Treatment

BiVO 4 is one of the most promising photoanode materials for water-splitting systems. Nitrogen incorporation into a BiVO 4 surface overcomes the known bottleneck in its charge-transfer kinetics into the electrolyte. We explored the role of nitrogen in the surface charge recombination and charge-transfer kinetics by employing transient photocurrent spectroscopy at the time scale of surface recombination and water oxidation kinetics, transient absorption spectroscopy, and X-ray photoelectron spectroscopy. We attributed the activity enhancement mechanism to the accelerated V 5+ /V 4+ redox process, in which incorporated nitrogen suppresses a limiting surface recombination channel by increasing the oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molybdenum Disulfide as a Protection Layer and Catalyst for Gallium Indium Phosphide Solar Water Splitting Photocathodes

Gallium indium phosphide (GaInP2) is a semiconductor with promising optical and electronic properties for solar water splitting, but its surface stability is problematic as it undergoes significant chemical and electrochemical corrosion in aqueous electrolytes. Molybdenum disulfide (MoS2) nanomaterials are promising to both protect GaInP2 and to improve catalysis since MoS2 is resistant to corrosion and also possesses high activity for the hydrogen evolution reaction (HER). In this work, we demonstrate that GaInP2 photocathodes coated with thin MoS2 surface protecting layers exhibit excellent activity and stability for solar hydrogen production, with no loss in performance (photocurrent onset potential, fill factor, and light limited current density) after 60 hours of operation. This represents a five-hundred fold increase in stability compared to bare p-GaInP2 samples tested in identical conditions.

14 SOLAR ENERGY↗

Exploring Polaronic, Excitonic Structures and Luminescence in Cs 4 PbBr 6 /CsPbBr 3

Among the important family of halide perovskites, one particular case of all-inorganic, 0-D Cs 4 PbBr 6 and 3-D CsPbBr 3 -based nanostructures and thin films is witnessing intense activity due to ultrafast luminescence with high quantum yield. To understand their emissive behavior, we use hybrid density functional calculations to first compare the ground-state electronic structure of the two prospective compounds. The dispersive band edges of CsPbBr 3 do not support self-trapped carriers, which agrees with reports of weak exciton binding energy and high photocurrent. The larger gap 0-D material Cs 4 PbBr 6 , however, reveals polaronic and excitonic features. We show that those lattice-coupled carriers are likely responsible for observed ultraviolet emission around ~375 nm, reported in bulk Cs 4 PbBr 6 and Cs 4 PbBr 6 /CsPbBr 3 composites. Ionization potential calculations and estimates of type-I band alignment support the notion of quantum confinement leading to fast, green emission from CsPbBr 3 nanostructures embedded in Cs 4 PbBr 6 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CsPbBr 3 Perovskite Nanocrystal Grown on MXene Nanosheets for Enhanced Photoelectric Detection and Photocatalytic CO 2 Reduction

All-inorganic CsPbX 3 (X = Cl, Br or I) perovskite nanocrystals have attracted extensive interest recently due to their exceptional optoelectronic properties. In an effort to improve the charge separation and transfer following efficient exciton generation in such nanocrystals, novel functional nanocomposites were synthesized by the in situ growth of CsPbBr 3 perovskite nanocrystals on two-dimensional MXene nanosheets. Efficient excited state charge transfer occurs between CsPbBr 3 NCs and MXene nanosheets, as indicated by significant photoluminescence (PL) quenching and much shorter PL decay lifetimes compared with pure CsPbBr 3 NCs. The as-obtained CsPbBr 3 /MXene nanocomposites demonstrated increased photocurrent generation in response to visible light and X-ray illumination, attesting to the potential application of these heterostructure nanocomposites for photoelectric detection. The efficient charge transfer also renders the CsPbBr 3 /MXene nanocomposite an active photocatalyst for the reduction of CO 2 to CO and CH 4 . This work provides a guide for exploration of perovskite materials in next-generation optoelectronics, such as photoelectric detectors or photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous Formation of >90% Optically Transmissive, Electrochemically Active CoP Films for Photoelectrochemical Hydrogen Evolution

Earth-abundant catalysts for the hydrogen-evolution reaction need increased mass loadings, relative to Pt films, to achieve comparable activity and stability in acidic electrolytes. We report herein that spontaneous nanostructuring of opaque, electrodeposited CoP films, 40–120 nm in thickness, leads to transparent electrocatalyst films that exhibit up to 90% optical transmission in the visible spectrum. The photocurrent density under simulated sunlight at a representative n + p-Si(100)/CoP photocathode increases by 200% after exposure to 0.50 M H 2 SO 4 (aq) and remains stable for 12 h of continuous operation. Atomic force microscopy and scanning electron microscopy of the film before and after exposure to 0.50 M H 2 SO 4 (aq) validate an optical model for transparent CoP films as probed with spectroscopic ellipsometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Growth of Copper Hydroxy Double Salt Films and Their Conversion to Nanostructured p-Type CuO Photocathodes

New electrochemical synthesis methods were developed to produce copper hydroxy double salts (Cu-HDS) films with four different intercalated anions (NO 3 - , SO 4 2- , Cl - , and dodecyl sulfate (DS)) as pure crystalline films as-deposited (Cu 2 NO 3 (OH) 3 , Cu 4 SO 4 (OH) 6 , Cu 2 Cl(OH) 2 , and Cu 2 DS(OH) 3 ). These methods are based on p-benzoquinone reduction, which increases the local pH at the working electrode and triggers the precipitation of Cu 2+ and appropriate anions as Cu-HDS films on the working electrode. The resulting Cu-HDS films could be converted to crystalline Cu(OH) 2 and CuO films by immersing them in basic solutions. Since Cu-HDS films were composed of 2D crystals due to the atomic level layered structure of HDS, the CuO films prepared from Cu-HDS films have unique low dimensional nanostructures, creating high surface areas, which cannot be obtained by direct deposition of CuO that has a 3D atomic level crystal structure. Here, the resulting nanostructures allowed the CuO films to facilitate electron-hole separation and demonstrate great promise for photocurrent generation when investigated as a photocathode for a water splitting photoelectrochemical cell. Electrochemical synthesis of Cu-HDS films and their facile conversion to CuO films will provide new routes to tune morphologies and properties of the CuO electrodes that may not be possible by other synthesis means.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surprisingly High Conductivity and Efficient Exciton Blocking in Fullerene/Wide-Energy-Gap Small Molecule Mixtures

We find that mixtures of C 60 with the wide energy gap, small molecular weight semiconductor bathophenanthroline (BPhen) exhibit a combination of surprisingly high electron conductivity and efficient exciton blocking when employed as buffer layers in organic photovoltaic cells. Photoluminescence quenching measurements show that a 1:1 BPhen/C 60 mixed layer has an exciton blocking efficiency of 84 ± 5% compared to that of 100% for a neat BPhen layer. This high blocking efficiency is accompanied by a 100-fold increase in electron conductivity compared with neat BPhen. Transient photocurrent measurements show that charge transport through a neat BPhen buffer is dispersive, in contrast to nondispersive transport in the compound buffer. Interestingly, although the conductivity is high, there is no clearly defined insulating-to-conducting phase transition with increased insulating BPhen fraction. Furthermore, we infer that C 60 undergoes nanoscale (<10 nm domain size) phase segregation even at very high (>80%) BPhen fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Contact-Induced Doping on the Behaviors of Organic Photovoltaic Devices

Substrates can significantly affect the electronic properties of organic semiconductors. In this paper, we report the effects of contact-induced doping, arising from charge transfer between a high work function hole extraction layer (HEL) and the organic active layer, on organic photovoltaic device performance. Employing a high work function HEL is found to increase doping in the active layer and decrease photocurrent. Combined experimental and modeling investigations reveal that higher doping increases polaron–exciton quenching and carrier recombination within the field-free region. Consequently, there exists an optimal HEL work function that enables a large built-in field while keeping the active layer doping low. This value is found to be ~0.4 eV larger than the pinning level of the active layer material. As a result, these understandings establish a criterion for optimal design of the HEL when adapting a new active layer system and can shed light on optimizing performance in other organic electronic devices.

14 SOLAR ENERGY↗

Polaron Stabilization by Cooperative Lattice Distortion and Cation Rotations in Hybrid Perovskite Materials

Solution-processed organometallic perovskites have rapidly developed into a top candidate for the active layer of photovoltaic devices. In spite of the remarkable progress associated with perovskite materials, many questions about the fundamental photophysical processes taking place in these devices, remain open. High on the list of unexplained phenomena are very modest mobilities despite low charge carrier effective masses. Moreover, experiments elucidate unique degradation of photocurrent affecting stable operation of perovskite solar cells. These puzzles suggest that, while ionic hybrid perovskite devices may have efficiencies on par with conventional Si and GaAs devices, they exhibit more complicated charge transport phenomena. We report the results from an in-depth computational study of small polaron formation, electronic structure, charge density, and reorganization energies using both periodic boundary conditions and isolated structures. Using the hybrid density functional theory, we found that volumetric strain in a CsPbI 3 cluster creates a polaron with binding energy of around 300 and 900 meV for holes and electrons, respectively. In the MAPbI 3 (MA = CH 3 NH 3 ) cluster, both volumetric strain and MA reorientation effects lead to larger binding energies at around 600 and 1300 meV for holes and electrons, respectively. Such large reorganization energies suggest appearance of small polarons in organometallic perovskite materials. Furthermore, the fact that both volumetric lattice strain and MA molecular rotational degrees of freedom can cooperate to create and stabilize polarons indicates that in order to mitigate this problem, formamidinium (FA = HC(NH 2 ) 2 ) and cesium (Cs) based crystals and alloys, are potentially better materials for solar cell and other optoelectronic applications.

36 MATERIALS SCIENCE↗

Hot Hole Collection and Photoelectrochemical CO 2 Reduction with Plasmonic Au/p-GaN Photocathodes

Harvesting nonequilibrium hot carriers from plasmonic- metal nanostructures offers unique opportunities for driving photo- chemical reactions at the nanoscale. Despite numerous examples of hot electron-driven processes, the realization of plasmonic systems capable of harvesting hot holes from metal nanostructures has eluded the nascent field of plasmonic photocatalysis. In this work, we fabricate gold/p-type gallium nitride (Au/p-GaN) Schottky junctions tailored for photoelectrochemical studies of plasmon-induced hot-hole capture and conversion. Despite the presence of an interfacial Schottky barrier to hot-hole injection of more than 1 eV across the Au/p-GaN heterojunction, plasmonic Au/p-GaN photocathodes exhibit photoelectrochemical properties consistent with the injection of hot holes from Au nanoparticles into p- GaN upon plasmon excitation. The photocurrent action spectrum of the plasmonic photocathodes faithfully follows the surface plasmon resonance absorption spectrum of the Au nanoparticles and open-circuit voltage studies demonstrate a sustained photovoltage during plasmon excitation. Comparison with Ohmic Au/p-NiO heterojunctions confirms that the vast majority of hot holes generated via interband transitions in Au are sufficiently hot to inject above the 1.1 eV interfacial Schottky barrier at the Au/p-GaN heterojunction. We further investigated plasmon-driven photoelectrochemical CO 2 reduction with the Au/p-GaN photocathodes and observed improved selectivity for CO production over H 2 evolution in aqueous electrolytes. Taken together, our results offer experimental validation of photoexcited hot holes more than 1 eV below the Au Fermi level and demonstrate a photoelectrochemical platform for harvesting hot carriers to drive solar-to-fuel energy conversion.

36 MATERIALS SCIENCE↗

Enhanced Light Emission from the Ridge of Two-Dimensional InSe Flakes

InSe, a newly rediscovered two-dimensional (2D) semiconductor, possesses superior electrical and optical properties as a direct-band-gap semiconductor with high mobility from bulk to atomically thin layers and is drastically different from transition-metal dichalcogenides, in which the direct band gap only exists at the single-layer limit. However, absorption in InSe is mostly dominated by an out-of-plane dipole contribution, which results in the limited absorption of normally incident light that can only excite the in-plane dipole at resonance. To address this challenge, we have explored a unique geometric ridge state of the 2D flake without compromising the sample quality. Here we observed the enhanced absorption at the ridge over a broad range of excitation frequencies from photocurrent and photoluminescence (PL) measurements. In addition, we have discovered new PL peaks at low temperatures due to defect states on the ridge, which can be as much as ~60 times stronger than the intrinsic PL peak of InSe. Interestingly, the PL of the defects is highly tunable through an external electrical field, which can be attributed to the Stark effect of the localized defects. InSe ridges thus provide new avenues for manipulating light–matter interactions and defect engineering that are vitally crucial for novel optoelectronic devices based on 2D semiconductors.

36 MATERIALS SCIENCE↗

Metastable Intermediates in Amorphous Titanium Oxide: A Hidden Role Leading to Ultra-Stable Photoanode Protection

Metastable intermediates represent a non-equilibrium state of matter that may impose profound impacts to materials properties beyond our understandings of monolithic and equilibrium systems. Here, we report a discovery of hidden metastable intermediates in amorphous TiO 2 thin films and their critical role in electrochemical damage. These intermediates have a non-bulk crystal-like structure and exhibit significantly higher electrical conductivity than both the amorphous and the crystalline phases. When these TiO 2 films are applied to protect Si photoelectrochemical (PEC) photoanodes, the intermediates can induce localized high electrical currents that largely accelerate the etching of the TiO 2 film and the Si electrode underneath. The intermediates can be effectively suppressed by raising their nucleation barrier via reducing the film thickness from 24 to 2.5 nm. The homogeneous amorphous TiO 2 -film-coated Si photoanodes achieved more than 500 h of PEC water oxidation at a steady photocurrent density of over 30 mA·cm –2 .

36 MATERIALS SCIENCE↗