Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Arcjet load characteristics

Experiments were conducted to define the interface characteristics and constraints of 1 kW class arcjets run on simulated decomposition products of hydrazine and power processors. The impacts of power supply output current ripple on arcjet performance were assessed by variation of the ripple frequency from 100 Hz to 100 kHz with 10 percent peak-to-peak ripple amplitude at 1.2 kW. Ripple had no significant effects on thrust, specific impulse or efficiency. The impact of output ripple on thruster lifetime was not assessed. The static and dynamic impedances of the arcjet were quantitied with two thrusters of nearly identical configuration. Superposition of an AC component on the DC arc current was used to characterize the dynamic impedance as a function of flow rate and DC current level. A mathematical model was formulated from these data. Both the static and dynamic impedance magnitude were found to be dependent on mass flow rate. The amplitude of the AC component was found to have little effect on the dynamic impedance. Reducing the DC level from 10 to 8 amps led to a large change in the magnitude of the dynamic impedance with no observable phase change. The impedance data compared favorably between the two thrusters.

Hamley, John A.↗
NASA NTRS1999

A Gas-Kinetic Method for Hyperbolic-Elliptic Equations and Its Application in Two-Phase Fluid Flow

A gas-kinetic method for the hyperbolic-elliptic equations is presented in this paper. In the mixed type system, the co-existence and the phase transition between liquid and gas are described by the van der Waals-type equation of state (EOS). Due to the unstable mechanism for a fluid in the elliptic region, interface between the liquid and gas can be kept sharp through the condensation and evaporation process to remove the "averaged" numerical fluid away from the elliptic region, and the interface thickness depends on the numerical diffusion and stiffness of the phase change. A few examples are presented in this paper for both phase transition and multifluid interface problems.

Xu, Kun↗
DOE OSTI2022

Effects of transient thermal shock on the microstructures and corrosion properties of a reduced activation high-entropy alloy

The devices would subject transient thermal shocks (TTS) during operation under extremely harsh conditions of nuclear fusion reactors, which inevitably exert significant impact on the microstructure and performance of structural materials. Here, a reduced activation VCrFeTa 0.2 W 0.2 high-entropy alloy (HEA) was developed by vacuum arc melting. The effects of electron beam induced TTS on its microstructure, microhardness, and corrosion properties were investigated. The results indicate that the weight fraction of each phase changes after TTS, showing a significant decrease in the content of BCC1 phase and an increase in the content of BCC2 and Laves phases. The content of BCC1 phase continues to decrease slightly with increasing the power of TTS. Besides, the microhardness of the alloy increases from ~673 HV to ~714 HV after TTS treatments. In the reduced activation HEA, TTS results in a relatively low corrosion current density of ~0.472 μA/cm 2 in 3.5 wt% NaCl solution, around one-third of the current density observed in the as-cast sample. Furthermore, the VCrFeTa 0.2 W 0.2 HEA after TTS exhibits a pitting potential of ~1.165 V SCE , which is much higher than that of the as-cast sample. The refined composite multiscale entropy method is employed to analyze the influence of TTS on current fluctuation behavior during the corrosion process. The reduced activation VCrFeTa 0.2 W 0.2 HEA exhibits excellent properties in harsh environments after TTS, thereby showing advantageous property in the field of nuclear structural materials. Furthermore, TTS is an efficient and controllable strategy for the improvement of the HEAs’ microstructures and performances.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Insights into the phase stability window, phase transformation behavior, and anisotropic thermal expansion of rhombohedral bismuth oxide

Rhombohedral bismuth oxide has emerged as a promising SOFC electrolyte material, particularly at low-to-intermediate temperatures. The stability window of this phase was explored using a co-doped system, using yttrium and lanthanum or aluminum, over 7.5–25 % total dopant content and 0.907–1.154 Å weighted average dopant cationic radius. The phase transformation behavior of rhombohedral-rich phase mixtures was also investigated in situ from 360 to 656 °C to assess the effects of minor impurity phases and thermal evolution pathways. Our results reveal that low-dopant, rhombohedral-rich compositions exhibit poor structural stability upon heating. Anisotropic thermal expansion behavior was observed over 450–656 °C, serving as a sensitive indicator of sequential phase changes, including the rhombohedral β2-to-β1 transition (∼450 °C), monoclinic phase formation, and delayed or incomplete formation of the cubic phase (∼ 550 °C). These multiple unfavorable phase transitions compromise the mechanical robustness required for SOFC operation. This study underscores the need for compositional tuning to balance ionic conductivity with thermal phase stability in rhombohedral Bi 2 O 3 -based systems.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Numerical simulation of icing, deicing, and shedding

An algorithm has been developed to numerically model the concurrent phenomena of two-dimensional transient heat transfer, ice accretion, ice shedding and ice trajectory which arise from the use of electrothermal pad. The Alternating Direction Implicit method is used to simultaneously solve the heat transfer and accretion equations occurring in the multilayered body covered with ice. In order to model the phase change between ice and water, a technique was used which assumes a phase for each node. This allows the equations to be linearized such that a direct solution is possible. This technique requires an iterative procedure to find the correct phase at each node. The computer program developed to find this solution has been integrated with the NASA-Lewis flow/trajectory code LEWICE.

Wright, W. B.↗
NASA NTRS1992

Numerical analysis of a thermal deicer

An algorithm has been developed to numerically model the concurrent phenomena of two-dimensional transient heat transfer, ice accretion and ice shedding which arise from the use of an electrothermal pad. The Alternating Direction Implicit method is used to simultaneously solve the heat transfer and accretion equations occurring in a multilayered body covered with ice. In order to model the phase change between ice and water, a technique was used which assumes a phase for each node. This allows the equations to be linearized such that a direct solution is possible. This technique requires an iterative procedure to find the correct phase at each node. The computer program developed to find this solution has been integrated with the NASA/Lewis flow/trajectory code LEWICE.

Wright, W. B.↗
NASA NTRS2006

Coherent Detection of High-Rate Optical PPM Signals

A method of coherent detection of high-rate pulse-position modulation (PPM) on a received laser beam has been conceived as a means of reducing the deleterious effects of noise and atmospheric turbulence in free-space optical communication using focal-plane detector array technologies. In comparison with a receiver based on direct detection of the intensity modulation of a PPM signal, a receiver based on the present method of coherent detection performs well at much higher background levels. In principle, the coherent-detection receiver can exhibit quantum-limited performance despite atmospheric turbulence. The key components of such a receiver include standard receiver optics, a laser that serves as a local oscillator, a focal-plane array of photodetectors, and a signal-processing and data-acquisition assembly needed to sample the focal-plane fields and reconstruct the pulsed signal prior to detection. The received PPM-modulated laser beam and the local-oscillator beam are focused onto the photodetector array, where they are mixed in the detection process. The two lasers are of the same or nearly the same frequency. If the two lasers are of different frequencies, then the coherent detection process is characterized as heterodyne and, using traditional heterodyne-detection terminology, the difference between the two laser frequencies is denoted the intermediate frequency (IF). If the two laser beams are of the same frequency and remain aligned in phase, then the coherent detection process is characterized as homodyne (essentially, heterodyne detection at zero IF). As a result of the inherent squaring operation of each photodetector, the output current includes an IF component that contains the signal modulation. The amplitude of the IF component is proportional to the product of the local-oscillator signal amplitude and the PPM signal amplitude. Hence, by using a sufficiently strong local-oscillator signal, one can make the PPM-modulated IF signal strong enough to overcome thermal noise in the receiver circuits: this is what makes it possible to achieve near-quantum-limited detection in the presence of strong background. Following quantum-limited coherent detection, the outputs of the individual photodetectors are automatically aligned in phase by use of one or more adaptive array compensation algorithms [e.g., the least-mean-square (LMS) algorithm]. Then the outputs are combined and the resulting signal is processed to extract the high-rate information, as though the PPM signal were received by a single photodetector. In a continuing series of experiments to test this method (see Fig. 1), the local oscillator has a wavelength of 1,064 nm, and another laser is used as a signal transmitter at a slightly different wavelength to establish an IF of about 6 MHz. There are 16 photodetectors in a 4 4 focal-plane array; the detector outputs are digitized at a sampling rate of 25 MHz, and the signals in digital form are combined by use of the LMS algorithm. Convergence of the adaptive combining algorithm in the presence of simulated atmospheric turbulence for optical PPM signals has already been demonstrated in the laboratory; the combined output is shown in Fig. 2(a), and Fig. 2(b) shows the behavior of the phase of the combining weights as a function of time (or samples). We observe that the phase of the weights has a sawtooth shape due to the continuously changing phase in the down-converted output, which is not exactly at zero frequency. Detailed performance analysis of this coherent free-space optical communication system in the presence of simulated atmospheric turbulence is currently under way.

Vilnrotter, Victor↗
NASA NTRS1972

Magnetism, dimensional changes, and magnetic transitions in hydrated cesium manganese chloride

Dimensional changes (strain) along the three principal crystal axes of the antiferromagnet CsMnCl3-2H2O are studied as a function of magnetic field and temperature in the antiferromagnetic, spin flopped, and paramagnetic phases. Changes in dimensions through the phase transitions between the magnetic states are examined. By applying the molecular field model and utilizing all available information, magnetic properties of CsMnCl3-2H2O are determined. The possible usefulness of this material in a magnetic refrigeration cycle is evaluated.

Woollam, J. A.↗
DOE OSTI2024

Influence of Carboxymethyl Cellulose as a Thickening Agent for Glauber’s Salt-Based Low Temperature PCM

This work is focused on a novel, promising low temperature phase change material (PCM), based on the eutectic Glauber’s salt composition. To allow phase transition within the refrigeration range of temperatures of +5 °C to +12 °C, combined with a high repeatability of melting–freezing processes, and minimized subcooling, the application of three variants of sodium carboxymethyl cellulose (Na-CMC) with distinct molecular weights (700,000, 250,000, and 90,000) is considered. The primary objective is to optimize the stabilization of this eutectic PCM formulation, while maintaining the desired enthalpy level. Preparation methods are refined to ensure repeatability in mixing components, thereby optimizing performance and stability. Additionally, the influence of Na-CMC molecular weight on stabilization is examined through differential scanning calorimetry (DSC), T-history, and rheology tests. The PCM formulation of interest builds upon prior research in which borax, ammonium chloride, and potassium chloride were used as additives to sodium sulfate decahydrate (Glauber’s salt), prioritizing environmentally responsible materials. The results reveal that CMC with molecular weights of 250 kg/mol and 90 kg/mol effectively stabilize the PCM without phase separation issues, slowing crystallization kinetics. Conversely, CMC of 700 kg/mol proved ineffective due to the disruption of gel formation at its low gel point, hindering higher concentrations. Calculations of ionic concentration indicate higher Na ion content in PCM stabilized with 90 kg/mol CMC, suggesting increased ionic interactions and gel strength. A tradeoff is discovered between the faster crystallization in lower molecular weight CMC and the higher concentration required, which increases the amount of inert material that does not participate in the phase transition. After thermal cycling, the best formulation had a latent heat of 130 J/g with no supercooling, demonstrating excellent performance. This work advances PCM’s reliability as a thermal energy storage solution for diverse applications and highlights the complex relationship between Na-CMC molecular weight and PCM stabilization.

25 ENERGY STORAGE↗
NASA NTRS1980

Heat storage in alloy transformations

The theory of eutectic transformation was examined to find guidelines to the best material combinations to examine. The heats of transformation were measured calorimetrically, and the volume changes of expanding solid mixtures and homogeneous liquid solutions, especially during the transformation between the two states at fixed temperature, were measured by changes in X-ray absorption. Heat flow models appropriate to storage in phase change materials were developed along with efficient calculating procedures so that the relative importance of the problems associated with energy storage density, heat conduction, and similar properties could be assessed.

Birchenall, C. E.↗
NASA NTRS2012

Optical Phase Recovery and Locking in a PPM Laser Communication Link

Free-space optical communication holds great promise for future space missions requiring high data rates. For data communication in deep space, the current architecture employs pulse position modulation (PPM). In this scheme, the light is transmitted and detected as pulses within an array of time slots. While the PPM method is efficient for data transmission, the phase of the laser light is not utilized. The phase coherence of a PPM optical signal has been investigated with the goal of developing a new laser communication and ranging scheme that utilizes optical coherence within the established PPM architecture and photon-counting detection (PCD). Experimental measurements of a PPM modulated optical signal were conducted, and modeling code was developed to generate random PPM signals and simulate spectra via FFT (Fast Fourier Transform) analysis. The experimental results show very good agreement with the simulations and confirm that coherence is preserved despite modulation with high extinction ratios and very low duty cycles. A real-time technique has been developed to recover the phase information through the mixing of a PPM signal with a frequency-shifted local oscillator (LO). This mixed signal is amplified, filtered, and integrated to generate a voltage proportional to the phase of the modulated signal. By choosing an appropriate time constant for integration, one can maintain a phase lock despite long dark times between consecutive pulses with low duty cycle. A proof-of-principle demonstration was first achieved with an RF-based PPM signal and test setup. With the same principle method, an optical carrier within a PPM modulated laser beam could also be tracked and recovered. A reference laser was phase-locked to an independent pulsed laser signal with low-duty-cycle pseudo-random PPM codes. In this way, the drifting carrier frequency in the primary laser source is tracked via its phase change in the mixed beat note, while the corresponding voltage feedback maintains the phase lock between the two laser sources. The novelty and key significance of this work is that the carrier phase information can be harnessed within an optical communication link based on PPM-PCD architecture. This technology development could lead to quantum-limited efficient performance within the communication link itself, as well as enable high-resolution optical tracking capabilities for planetary science and spacecraft navigation.

Aveline, David C.↗
NASA NTRSDate not supplied

Artemis II Mission Performance of the Orion Active Thermal Control System

The Orion spacecraft has recently completed Artemis II, the first crewed mission around the moon in 54 years. This test flight demonstrated vehicle capability as the foundation for all future missions under the Artemis program. As a major system of Orion, the Active Thermal Control System (ATCS) successfully managed crew and vehicle heat loads to provide adequate cooling and thermal comfort for the duration of the Artemis II mission. Thermal control on the Orion vehicle is managed through two redundant cooling loops in the Crew Module (CM) that absorb heat loads from the cabin and Air Revitalization System (ARS) heat exchangers, the Liquid Cooling Garment (LCG) heat exchanger, and the avionics cold plates, and then transfer those heat loads to the Service Module (SM) radiator loops and/or the Phase Change Material (PCM) and ammonia boilers when required through thermal configuration or mission phase. During Artemis II, Orion did not necessitate any supplemental cooling from ammonia boilers until service module separation, allowing the maximum availability of ammonia cooling prior to entry. This presentation will provide an overview of the Orion ATCS major subsystems, highlight the performance during key mission phases, and comment on the applicability of the observed thermal response to future Artemis missions.

Ellie Thurston↗
DOE OSTI2025

Thermally tunable mid-infrared nanocavity resonance of coupled surface plasmon-phonon polaritons

Phase-change materials (PCMs) are essential for achieving tunability of metasurfaces. However, they frequently face limitations in the long-wave infrared range because of their lossy behavior. Here, we experimentally demonstrate a thermally tunable mid-infrared nanocavity resonance from coupled surface plasmon-phonon polaritons that are supported within a trilayer structure of metal-PCM layer-polar dielectric (Au-VO 2 -SiC). The top metal structures configure the Fabry-Perot cavity resonance near 840 cm −1 (11.9 µm), which is sensitively tunable and reversible with small changes in the VO 2 refractive index ∆n near below its insulator-to-metal phase transition temperature where the loss is small. The maximum resonance shift of 7.7 cm −1 is induced by a small ∆n = 0.3 over a temperature change of 3°C. The tuning figure of merit is comparable to the current standard in photonic modulator applications.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Space-qualified Chalcogenide Materials through ISS MISSE Exposure —From Property to Application

In March 2021, twenty-four samples of various phase change materials (PCMs - Ge2Sb2Te5, Ge2Sb2Se4Te1, and Sb2Se3) along with metasurface optical components comprised of these PCMs, were delivered to the International Space Station (ISS) as part of the Materials International Space Station Experiment (MISSE-14) test campaign [1]. Although PCMs have previously been noted for their resilience to various forms of radiation [2], they had not been tested in a realistic space environment until this exposure campaign with joint NASA and MIT collaboration. During the six-month total open exposure time in low earth orbit (LEO), high-resolution cameras scanned and captured photographs of the samples to detect changes as a function of time along with on-orbit measured temperature, UV radiation, total atomic oxygen fluence, and total ionizing radiation doses. The samples were returned to NASA Langley Research Center in March 2022 for post-flight characterization. This duplicated the preflight characterization (i.e., material composition and crystallinity that limits switching speed, index contrast, loss, etc.) conducted before launch. The space sector has witnessed tremendous growth within the past decade—not only from government agencies but also entrants from the private sector. Future growth in the capabilities of Earth observation, deep space, and planetary surface missions using miniaturized spacecraft platforms can only be sustained by innovations in the design of remote sensors and other sub-systems. Active metasurface optics with enhanced tunability and reconfigurability continues to redefine the boundaries of optical science [3]. The introduction of PCM technology and associated optical devices will help to accelerate the adoption of new architectures for reduced size, weight, power, and cost (SWaP-C) platforms in space.Here we introduce results obtained from the MISSE-14 mission related to space qualification of PCM-based optic devices and constituent materials. We then discuss our recent work developing active integrated photonic devices and metasurface optics based on PCMs for space applications. This includes tunable and reconfigurable optical metasurface devices to support NASA space communication and LIDAR applications. PCMs are quickly becoming interesting photonics materials but questions related to mission suitability remain, particularly in regard to key properties like figures-of-merit (FOM, Δn/Δk), glass forming temperatures, and phase transition speeds. This talk will describe efforts to afford researchers the ability to have access to cost-effective data on exposure-induced changes to PCM fundamental physical and optical properties to assess their utility for space applications. The MISSE-14 sample exposure campaign allows a complete understanding of the limitations of the PCMs for various space-based electronic and optoelectronic applications.

Chalcogenide Phase change material↗
DOE OSTI2026

A collective trigger for widespread planetesimal formation revealed by accretion ages

The formation of planetesimals was an integral part of the cascading series of processes that built the terrestrial planets. To illuminate planetesimal formation, here we develop a refined thermal evolution model to calculate the formation ages of meteorite parent planetesimals. This model includes chemical reactions and phase changes during heating, as well as natural variations in the proportions of the constituent phases of these planetesimals. We find that the parent bodies of non-carbonaceous (NC) and carbonaceous (CC) iron meteorites start forming at very similar times ( ∼ 0.95 Myr after calcium-aluminium-rich inclusion [CAI] formation) and occupy overlapping time windows. NC and CC chondrite parent bodies formed later during non-overlapping periods. We combine these ages with proportions of isotopic end-members we recover from mixing models to construct records of motion throughout the protoplanetary disk. These records argue that NC and CC material traversed the barrier in the disk after ∼ 0.95 Myr after CAI formation. The onset of this motion coincided with planetesimal formation, indicating that the phenomenon that drove motion also triggered planetesimal formation. We argue that this feature also served as the semi-permeable barrier in the disk. Although its identity is uncertain, the effects this phenomenon had on the timing of planetesimal formation and motion through the disk can now serve as constraints on models of disk evolution. Models that reproduce these effects would elucidate the nature and implications of this phenomenon, which is key to unlocking a holistic model of terrestrial planet building.

Astronomy and AstroPhysics↗
DOE OSTI2021

Effects of growth substrate on the nucleation of monolayer MoTe 2

The discovery and characterization of two-dimensional (2D) materials beyond graphene has increased dramatically over the past decade with increasingly fine control over the growth dynamics of these materials. MoTe 2 represents a model material for studying phase change properties of 2D materials due to small energy differences between its 2H semiconducting phase and 1T' semimetallic phase. Although some substrates are demonstrated to be better than others for the wafer-scale growth of high quality MoTe 2 films, substrate effects on the nucleation and growth of MoTe 2 are still not well understood. Here, we grow monolayer MoTe 2 by converting MoO x thin films deposited on three different substrates: sapphire Al 2 O 3 (0001), amorphous SiO 2 , and amorphous AlO x , and examine the early stages of the conversion reaction to elucidate the substrate effects on the nucleation of MoTe 2 . We observe that the chemical composition of the substrate is more important than the surface topography and crystallinity of the substrate, with high quality monolayer 2H MoTe 2 formed on both Al 2 O 3 (0001) and AlO x in contrast to mixed phase 2H/1T' MoTe 2 formed on SiO 2 , as determined by Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Imaging coherent phonons and precursor dynamics in LaFeAsO with 4D ultrafast electron microscopy

In this work, we used 4D ultrafast electron microscopy (UEM) to directly image femtosecond photoinduced structural dynamics in single-crystal LaFeAsO at initial temperatures of 300 and 100 K, above and below the known structural and magnetic phase-transition temperatures, respectively. With nanometer-picosecond resolution, we resolved an initial (precursor) sigmoidlike response arising from photothermal expansion and lattice reorientation that precedes the onset of propagating coherent acoustic phonons (CAPs). In the specific regions probed, the precursor response at 100 K is shorter than at 300 K ($t$ 0.5;100 K = 11.3ps vs $t$ 0.5;300 K = 17.8ps), and the CAP oscillation frequency is lowered with cooling (ƒ CAP;100 K = 12 GHz vs ƒ CAP;300 K = 21 GHz), correlated to known lattice softening due to the structural phase change. The transient CAP behaviors at 300 K are dispersive, displaying an exponentially decaying phase velocity over the first nanosecond. Further, the CAP symmetry at 300 K matches a first-order antisymmetric shear mode (A 1 ), while at 100 K it is best matched by a mostly nondispersive zero-order symmetric mode (S 0 ). These findings illustrate the sensitivity of UEM imaging to spatially heterogeneous dynamics in the Fe-pnictide materials and more broadly in other quantum materials.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Application of matrix singular value properties for evaluating gain and phase margins of multiloop systems

A stability margin evaluation method in terms of simultaneous gain and phase changes in all loops of a multiloop system is presented. A universal gain-phase margin evaluation diagram is constructed by generalizing an existing method using matrix singular value properties. Using this diagram and computing the minimum singular value of the system return difference matrix over the operating frequency range, regions of guaranteed stability margins can be obtained. Singular values are computed for a wing flutter suppression and a drone lateral attitude control problem. The numerical results indicate that this method predicts quite conservative stability margins. In the second example if the eigenvalue magnitude is used instead of the singular value, as a measure of nearness to singularity, more realistic stability margins are obtained. However, this relaxed measure generally cannot guarantee global stability.

Mukhopadhyay, V.↗