Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Wave propagation in composite media and material characterization

Characteristics of wave propagation in an undamaged composite medium are influenced by many factors, the most important of which are: microstructure, constituent properties, interfaces, residual stress fields, and ply lay-ups. Measurements of wave velocities, attenuation, and dispersion provide a powerful tool for nondestructive evaluation of these properties. Recent developments are reviewed for modeling ultrasonic wave propagation in fiber and particle-reinforced composite media. Additionally, some modeling studies are reviewed for the effects of interfaces and layering on attenuation and dispersion. These studies indicate possible ways of characterizing material properties by ultrasonic means.

Datta, Subhendu K.↗

Inverse Energy Dispersion of Energetic Ions Observed in the Magnetosheath

We present a case study of energetic ions observed by the Energetic Particle Detector (EPD) on the Magnetospheric Multiscale spacecraft in the magnetosheath just outside the subsolar magnetopause that occurred at 1000 UT on 8 December 2015. As the magnetopause receded inward, the EPD observed a burst of energetic (approximately 50-1000 keV) proton, helium, and oxygen ions that exhibited an inverse dispersion, with the lowest energy ions appearing first. The prolonged interval of fast antisunward flow observed in the magnetosheath and transient increases in the H components of global ground magnetograms demonstrate that the burst appeared at a time when the magnetosphere was rapidly compressed. We attribute the inverse energy dispersion to the leakage along reconnected magnetic field lines of betatron-accelerated energetic ions in the magnetosheath, and a burst of reconnection has an extent of about 1.5 R(sub E) using combined Super Dual Auroral Radar Network radar and EPD observations.

Lee, S. H.↗

Further analysis of remnants found in LDEF and Mir impact craters

This study is the further investigation of space-exposed samples recently recovered from the American satellite LDEF and the Franco-Soviet Mir 'Aragatz' experiment. Some interesting impact features have been selected as examples to demonstrate various findings. Part of the objective of the experiments was to determine the nature and origin of particles in low earth orbit (LEO). Observations show that the 'multiple foil detectors' appear to be an effective way of retaining impactor residues of larger particles. They provide a 'witness' foil that shows the shape and dimensions of the impacting particle. Several low-velocity (less than 4 km/s) oblique craters containing significant quantities of impactor residue have been identified. Energy dispersive spectrometer (EDS) analyses of the residues show evidence of micrometeoroid and debris compositions. Similarities between the meteoroid signatures and those of Brownlee particles have been noted. Evidence of at least two different grain compositions in one impacting particle is shown. The discovery of debris impacts on the trailing edge of LDEF demonstrates that artificial debris may be found, not just in circular orbits, but also in elliptical orbits.

Berthoud, S. Lucinda↗

Effect of 3D-printed surface textures on wear mechanism in 3-body abrasion of soil

This study systematically investigates the enhancement of wear resistance in 3D printed surface textures through both experimental and theoretical approaches. Three distinct surface morphologies (Smooth Surface, Surface with uniformly distributed Pits, and Surface with uniformly distributed Bumps) were fabricated using High-Impact Polystyrene, where the meso-scale textures were precisely controlled through the 3D printing process. Wear behavior was evaluated using a 3-body wear tester in an abrasive particle environment, analyzing the influence of surface textures under various operating conditions. Systematic wear tests revealed that optimally designed surface textures achieved a remarkable 77 % reduction in wear compared to the worst-performing sample. The wear mechanisms were comprehensively characterized through weight loss measurements, Scanning Electron Microscopy (SEM), and Energy Dispersive Spectroscopy (EDS) analyses, elucidating the surface morphology changes and their interaction with wear particles. Notably, the study identified how the geometric characteristics of surface textures influence the movement of wear particles and the distribution of contact stresses. Discrete element method simulations corroborated the experimental findings, providing theoretical validation for the enhanced wear resistance of the optimal structure. The high correlation between simulated wear patterns and experimental results validates the reliability of the proposed design methodology. In conclusion, these results demonstrate that 3D printed surface texturing offers a cost-effective and scalable approach to significantly improve wear resistance in engineering applications, presenting a practical alternative to conventional, high-cost surface engineering methods.

3-body abrasion↗

Aggregation-induced phosphorescence sensitization in two heptanuclear and decanuclear gold–silver sandwich clusters

The strategy of aggregation-induced emission enhancement (AIEE) has been proven to be efficient in wide areas and has recently been adopted in the field of metal nanoclusters. Furthermore, the relationship between atomically precise clusters and AIEE is still unclear. Herein, we have successfully obtained two few-atom heterometallic gold–silver hepta-/decanuclear clusters, denoted Au 6 Ag and Au 9 Ag, and determined their structures by X-ray diffraction and mass spectrometry. The nature of the AuI…AgI interactions thereof is demonstrated through energy decomposition analysis to be far-beyond typical closed-shell metal–metal interaction dominated by dispersion interaction. Furthermore, a positive correlation has been established between the particle size of the nanoaggregates and the photoluminescence quantum yield for Au 6 Ag, manifesting AIEE control upon varying the stoichiometric ratio of Au : Ag in atomically-precise clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Verification of local electrostatic gyrokinetic simulation of driftwave instability in field-reversed configuration

Local linear simulations of ion temperature gradient (ITG) instabilities using a gyrokinetic particle code GKD1D have been verified by comparing with the analytic dispersion relation in the slab geometry and by benchmarking with a global gyrokinetic code GTC-X in a realistic field-reversed configuration (FRC). Results of ITG simulations using either adiabatic or kinetic electrons exhibit excellent agreements between the two codes for linear frequencies, growth rates, and mode structures. The ITG modes in the FRC scrape-off layer region are mostly dominated by the poloidal m = 1 harmonic. Kinetic electrons enhance the subdominant m = 2 harmonic and the even parity dominates the ITG mode structure. Kinetic electrons increase the growth rates for the low-n modes, but decrease the growth rates for the high-n modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Data-driven Mori–Zwanzig modeling of Lagrangian particle dynamics in turbulent flows

The dynamics of Lagrangian particles in turbulence play a crucial role in mixing, transport, and dispersion in complex flows. Their trajectories exhibit highly nontrivial statistical behavior, motivating the development of surrogate models that can reproduce these trajectories without incurring the high computational cost of direct numerical simulations of the full Eulerian field. This task is particularly challenging because reduced-order models typically lack access to the full set of interactions with the underlying turbulent field. Novel data-driven machine learning techniques can be powerful in capturing and reproducing complex statistics of the reduced-order/surrogate dynamics. In this work, we show how one can learn a surrogate dynamical system that is able to evolve a turbulent Lagrangian trajectory in a way that is point-wise accurate for short-time predictions (with respect to Kolmogorov time) and stable and statistically accurate at long times. This approach is based on the Mori–Zwanzig formalism, which prescribes a mathematical decomposition of the full dynamical system into resolved dynamics that depend on the current state and the past history of a reduced set of observables, and the unresolved orthogonal dynamics due to unresolved degrees of freedom of the initial state. We show how by training this reduced order model on a point-wise error metric on short time-prediction, we are able to correctly learn the dynamics of Lagrangian turbulence, such that also the long-time statistical behavior is stably recovered at test time. This opens up a range of applications, for example, for the control of active Lagrangian agents in turbulence.

97 MATHEMATICS AND COMPUTING↗

Low-energy physics of isotropic spin-1 chains in the critical and Haldane phases

Using a matrix product state algorithm with infinite boundary conditions, we compute high-resolution dynamic spin and quadrupolar structure factors in the thermodynamic limit to explore the low-energy excitations of isotropic bilinear-biquadratic spin-1 chains. Haldane mapped the spin-1 Heisenberg antiferromagnet to a continuum field theory, the nonlinear sigma model (NLσM). In this work, we find that the NLσM fails to capture the influence of the biquadratic term and provides only an unsatisfactory description of the Haldane phase physics. But several features in the Haldane phase can be explained by noninteracting multimagnon states. The physics at the Uimin-Lai-Sutherland point is characterized by multisoliton continua. Moving into the extended critical phase, we find that these excitation continua contract, which we explain using a field-theoretic description. New excitations emerge at higher energies and, in the vicinity of the purely biquadratic point, they show simple cosine dispersions. Using block fidelities, we identify them as elementary one-particle excitations and relate them to the integrable Temperley-Lieb chain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Regular expansion solutions for small Peclet number heat or mass transfer in concentrated two-phase particulate systems

Steady state heat or mass transfer in concentrated ensembles of drops, bubbles or solid spheres in uniform, slow viscous motion, is investigated. Convective effects at small Peclet numbers are taken into account by expanding the nondimensional temperature or concentration in powers of the Peclet number. Uniformly valid solutions are obtained, which reflect the effects of dispersed phase content and rate of internal circulation within the fluid particles. The dependence of the range of Peclet and Reynolds numbers, for which regular expansions are valid, on particle concentration is discussed.

Yaron, I.↗

Metallurgical characterization of the fracture of several high strength aluminum alloys

The fracture behavior for structural aluminum alloys (2024, 6061, 7075, and 7178) was examined in selected heat treatments. The investigation included tensile, shear, and precracked notch-bend specimens fractured at ambient temperature under monotonic loading. Specimens were obtained from thin sheets and thick plates and were tested in longitudinal and transverse orientations at different strain rates. Microstructures of alloys were examined using the optical microscope and the scanning electron microscope with associated energy dispersive X ray chemical analysis. Several different types of second phase particles, some not reported by other investigators, were identified in the alloys. Fracture morphology was related to microstructural variables, test variables, and type of commercial product. Specimen orientation examined in the present investigation had little effect on fracture morphology. Test strain rate changes resulted in some change in shear fracture morphology, but not in fracture morphology of tensile specimens.

Bhandarkar, M. D.↗

A simulation study of kilometric radiation generation along an auroral field line

A model for the high-altitude auroral zone is combined with local particle simulations in order to assess the quantitative implications of relativistic dispersion for the generation of auroral kilometric radiation. The auroral zone model is described, including the distribution functions for the primary and secondary electron populations and the variations of the total number density with altitude. The analysis shows that the most intense cyclotron maser emission should occur in the 1.75-2.0 R(E) altitude range. At lower altitudes, the secondary electrons are dominant, and the instability saturates at a low level. At higher altitudes, the energy of the primary electron is lower, and again the radiation level drops. The simulations indicate that linear growth rates of the order of 0.002 Omega(e) occur in this region and that the conversion of primary electron energy into AKR is about one percent.

Pritchett, P. L.↗

Metal/Ceramic Bond Coatings For High Temperatures

Reduced-thermal-expansion bond coatings developed for use at high temperatures in thermal-barrier-coating systems. Bond coatings composed of low-pressure-plasma-sprayed metallic matrices dispersed with low-thermal-expansion high-bulk-modulus ceramic particles. New coatings and application lower thermal-expansion-mismatch strain while maintaining integrity at high temperatures.

Miller, Robert A.↗

Model of the formation of the low-latitude boundary layer for strongly northward interplanetary magnetic field

A model for the formation of the low-boundary layer in which a magnetosheath flux tube reconnects in the north and south beyond the cusp when the IMF is strongly northward is presented. For northward IMF the geomagnetic field captures solar wind flux tubes through intermittent reconnection at the cusp region. These newly captured flux tubes shorten and sink into the magnetosphere while the flux tubes reorient themselves as they become assimilated into the magnetosphere. There is no significant acceleration for the particles within the flux tubes. In the magnetosphere the interchange instability disperses the flux tube azimuthally along the magnetopause to form a boundary layer. Subsequent reconnection forms sublayers of the boundary layer and different sublayers represent different ages after reconnection. The interchange instability is stable radially, which keeps sharp boundaries between sublayers and between the boundary layer and magnetosphere.

Song, P.↗

A three-dimensional ring current decay model

This work is an extension of a previous ring current decay model. In the previous work, a two-dimensional kinetic model was constructed to study the temporal variations of the equatorially mirroring ring current ions, considering charge exchange and Coulomb drag losses along drift paths in a magnetic dipole field. In this work, particles with arbitrary pitch angle are considered. By bounce averaging the kinetic equation of the phase space density, information along magnetic field lines can be inferred from the equator. The three-dimensional model is used to simulate the recovery phase of a model great magnetic storm, similar to that which occurred in early February 1986. The initial distribution of ring current ions (at the minimum Dst) is extrapolated to all local times from AMPTE/CCE spacecraft observations on the dawn and dusk sides of the inner magnetosphere spanning the L value range L = 2.25 to 6.75. Observations by AMPTE/CCE of ring current distributions over subsequent orbits during the storm recovery phase are compared to model outputs. In general, the calculated ion fluxes are consistent with observations, except for H+ fluxes at tens of keV, which are always over-estimated. A newly-invented visualization idea, designated as a chromogram, is used to display the spatial and energy dependence of the ring current ion differential flux. Important features of storm-time ring current, such as day-night asymmetry during injection and drift hole on the dayside at low energies (less than 10 keV), are manifested in the chromogram representation. The pitch angle distribution is well fit by the function, j(sub o)(1+Ay(exp n)), where y is sine of the equatorial pitch angle. The evolution of the index n is a combined effect of charge exchange loss and particle drift. At low energies (less than 30 keV), both drift dispersion and charge exchange are important in determining n.

Fok, Mei-Ching↗

Three-dimensional ring current decay model

This work is an extension of a previous ring current decay model. In the previous work, a two-dimensional kinetic model was constructed to study the temporal variations of the equatorially mirroring ring current ions, considering charge exchange and Coulomb drag losses along drift paths in a magnetic dipole field. In this work, particles with arbitrary pitch angle are considered. By bounce averaging the kinetic equation of the phase space density, information along magnetic field lines can be inferred from the equator. The three-dimensional model is used to simulate the recovery phase of a model great magnetic storm, similar to that which occurred in early February 1986. The initial distribution of ring current ions (at the minimum Dst) is extrapolated to all local times from AMPTE/CCE spacecraft observations on the dawnside and duskside of the inner magnetosphere spanning the L value range L = 2.25 to 6.75. Observations by AMPTE/CCE of ring current distributions over subsequent orbits during the storm recovery phase are compared to model outputs. In general, the calculated ion fluxes are consistent with observations, except for H(+) fluxes at tens of keV, which are always overestimated. A newly invented visualization idea, designated as a chromogram, is used to display the spatial and energy dependence of the ring current ion differential flux. Important features of storm time ring current, such as day-night asymmetry during injection and drift hole on the dayside at low energies (less than 10 keV), are manifested in the chromogram representation. The pitch angle distribution is well fit by the function, J(sub o)(1 + Ay(sup n)), where y is sine of the equatorial pitch angle. The evolution of the index n is a combined effect of charge exchange loss and particle drift. At low energies (less than 30 keV), both drift dispersion and charge exchange are important in determining n.

Fok, Mei-Ching↗

Micro Electron MicroProbe and Sample Analyzer

A proposed, low-power, backpack-sized instrument, denoted the micro electron microprobe and sample analyzer (MEMSA), would serve as a means of rapidly performing high-resolution microscopy and energy-dispersive x-ray spectroscopy (EDX) of soil, dust, and rock particles in the field. The MEMSA would be similar to an environmental scanning electron microscope (ESEM) but would be much smaller and designed specifically for field use in studying effects of geological alteration at the micrometer scale. Like an ESEM, the MEMSA could be used to examine uncoated, electrically nonconductive specimens. In addition to the difference in size, other significant differences between the MEMSA and an ESEM lie in the mode of scanning and the nature of the electron source.

Manohara, Harish↗

Use of Functionalized Carbon Nanotubes for Covalent Attachment of Nanotubes to Silicon

The purpose of the invention is to covalently attach functionalized carbon nanotubes to silicon. This step allows for the introduction of carbon nanotubes onto all manner of silicon surfaces, and thereby introduction of carbon nano - tubes covalently into silicon-based devices, onto silicon particles, and onto silicon surfaces. Single-walled carbon nanotubes (SWNTs) dispersed as individuals in surfactant were functionalized. The nano - tube was first treated with 4-t-butylbenzenediazonium tetrafluoroborate to give increased solubility to the carbon nanotube; the second group attached to the sidewall of the nanotube has a silyl-protected terminal alkyne that is de-protected in situ. This gives a soluble carbon nanotube that has functional groups appended to the sidewall that can be attached covalently to silicon. This reaction was monitored by UV/vis/NJR to assure direct covalent functionalization.

Tour, James M.↗

Aerosol seeding systems for the NSWC wind tunnels

Four types of laskin nozzles which are used to generate the primary aerosol mist are illustrated. This mist may be used directly as laser doppler velocimeters (LDV) particles. However, in general, a wide range of particle size exists at this stage and requires the use of some type of mono-dispersion refinement technique. These nozzles rely on the shearing action of high speed air near a column of seeding liquid. Typically, olive oil or dioctyl phthalate (DOP) is used, but within the past year solid polystyrene particles in an alcohol suspension have been used with great success. Air, at a typical pressure of five psig, is supplied to the top of the nozzle which is merely a hollow tube. This air issues radially from one or more small jets located near the collar close to the bottom of the tube. When the collar is submerged in the seeding liquid, the hollow columns located in the collar become filled with liquid. The air from the jet shears the liquid into the fine mist.

Yanta, W. J.↗