Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle Size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of mechanically alloying Al 2 O 3 and Y 2 O 3 additives on the liquid phase sintering behavior and properties of SiC

In order to improve the sintering of SiC, mixtures of Al 2 O 3 and Y 2 O 3 powders are commonly included as sintering additives. The aim of this work was to use mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures as sintering additives to promote liquid phase sintering of SiC using spark plasma sintering. The results showed that milling reduced the particle size of the powders and led to the formation of complex oxide phases (YAP, YAM, and YAG) at low temperatures. As the ball milling time increased, the mass loss of specimens sintered with mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures decreased, and accordingly the relative density increased. However, the hardness and flexural strength of sintered SiC specimens first increased and then decreased. Because the specimens prepared with oxides milled for a long time contained too much YAG/YAP and accordingly too much liquid at sintering temperature. This negatively affected the mechanical properties of the SiC specimens because of the increased volume of the complex oxide phases, which have inferior mechanical properties to SiC, in the sintered specimens. In conclusion, when the ball milling time was 6h, the hardness (24.02 GPa) and flexural strength (655.61 MPa) of the SiC specimens reached maximum values.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward a tunable fabrication of multifunctional iron-aluminum spinels via solution combustion synthesis: The effects of fuel, heating mode, and Fe:Al precursor ratio

The solid solutions of iron and aluminum spinels (hercynite, maghemite, magnetite, and γ-alumina) are promising materials for emerging technologies such as solar thermochemical fuel production and clean dehydrogenation of fossil fuels. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials as it has been used for synthesis of many nanoscale oxides. However, the design space of SCS is large with many synthesis parameters affecting the properties of the combustion products. To optimize the SCS of these materials, it is important to determine which parameters yield the best properties. In the present work, FeAlO x nanocomposites were obtained by SCS using iron nitrate and aluminum nitrate as precursors and oxidizers. Two fuels (citric acid and glycine), three Fe:Al molar ratios (1:2, 1:1, and 2:1) in the precursors, and three heating modes (hotplate, muffle furnace, and microwave oven) were compared. The products were characterized by X-ray diffraction analysis, scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and laser diffraction particle size analysis. The fuel used had the largest impact on the combustion behavior and hence the material properties. The high combustion temperature of glycine allowed for the formation of an FeAl 2 O 4 /Fe 3 O 4 solid solution, while the lower-temperature combustion of citric acid yielded Al-substituted γ-Fe 2 O 3 with high amorphous content. With citric acid, the specific surface area as high as 200 m 2 /g was achieved. The effect of Fe:Al precursor ratio was clearly seen in variations of the lattice parameter, which demonstrated the ability to tune the phase composition. The heating mode had minor effects on material properties, but some differences were observed. As a result, all products obtained by SCS in a microwave oven had low specific surface areas compared to those obtained with a hotplate and a muffle furnace.

Alumina↗
DOE OSTI2026

Scaled melter testing of alternative reductants for Low-Activity Waste vitrification: Melter feed properties and processing behavior

This study examines the use of boron nitride (BN) and coke dust as alternative reductants for low-activity waste vitrification in scaled melter systems, intended to enhance operational flexibility at the Hanford Waste Treatment and Immobilization Plant. The baseline reductant, sucrose, while widely considered advantageous for glass production rates, produces challenging off gas emissions during processing. Early crucible-scale testing indicated that BN and coke effectively control foaming and glass redox, while significantly reducing acetonitrile emissions. Both real tank waste and simulant waste melter feeds were tested with BN and coke in this study. Rheological properties for melter feeds with both reductants were within operational limits, although the particle size of coke should be controlled and sufficient agitation is necessary to ensure smooth operations. While promising for handling and reduction of emissions, both simulant melter feeds demonstrated lower average glass production rates in the simulant melter system compared with sucrose. In the radioactive system, the rates were more comparable to previously measured low activity waste feeds on the order of 1285 kg m 2 day −1 for BN and 1671 kg m −2 day −1 for coke. Further scale-up testing is required to interpret the processing rates in the context of the full scale melter systems and evaluate the cost-benefit impact of these reductants on efficiency and sustainability.

Rigby, Jessica C. [Pacific Northwest National Labo↗
DOE OSTI2026

Spinel high-entropy oxides (FeNiCrMnZnX) 3 O 4 (X = Al, mg) as anode materials for high-performance lithium-ion batteries

To address the high cost, cobalt dependency, and resource constraints typical of conventional high-entropy oxide (HEO) anodes, this study reports the successful synthesis of two Co-free, six-component spinel-type HEOs(FeNiCrMnZnAl) 3 O 4 (HEO-Al) and (FeNiCrMnZnMg) 3 O 4 (HEO-Mg), via a sol-gel method. The distinct effects of Al 3+ and Mg 2+ incorporation on the electrochemical performance and lithium storage kinetics were systematically investigated. XRD, Raman, and TEM characterizations confirm that both materials possess a pure spinel phase, uniform particle size, and homogeneous elemental distribution. Notably, electrochemical evaluations reveal that HEO-Al delivers a superior reversible capacity of 480.7 mAh g −1 after 100 cycles at 0.1 A g −1 , and maintains 354.5 mAh g −1 after 1000 long-term cycles at 1 A g −1 , significantly outperforming HEO-Mg. Kinetic analysis indicates that HEO-Al exhibits lower charge transfer resistance, a higher Li + diffusion coefficient, and a pseudocapacitive contribution of up to 82%. Furthermore, these findings demonstrate that Al substitution effectively optimizes the structural stability and lithium storage kinetics of Co-free HEOs, providing a viable strategy for designing low-cost, highly stable HEO anode systems.

Anode materials↗
DOE OSTI2020

A physics-informed operator regression framework for extracting data-driven continuum models

The application of deep learning toward discovery of data-driven models requires careful application of inductive biases to obtain a description of physics which is both accurate and robust. We present here a framework for discovering continuum models from high fidelity molecular simulation data. Our approach applies a neural network parameterization of governing physics in modal space, allowing a characterization of differential operators while providing structure which may be used to impose biases related to symmetry, isotropy, and conservation form. Here, we demonstrate the effectiveness of our framework for a variety of physics, including local and nonlocal diffusion processes and single and multiphase flows. For the flow physics we demonstrate this approach leads to a learned operator that generalizes to system characteristics not included in the training sets, such as variable particle sizes, densities, and concentration.

42 ENGINEERING↗
DOE OSTI2022

Partitioning behavior and mechanisms of rare earth elements during precipitation in acid mine drainage

Rare earth elements (REEs) are frequently found concentrated in acid mine drainage (AMD). The recovery of REEs from AMD has been successfully achieved using selective chemical precipitation. However, a portion of the REEs is often lost to the precipitates of the dominant metal contaminant ions. To better understand the REE partitioning behavior and mechanisms during the precipitation process, a systematic study was performed on both natural and synthetic AMD solutions. Precipitation test results show that REE removal was noticeably elevated at pH 4.0 after adding H 2 O 2 to convert ferrous to ferric ions, causing nearly complete precipitation of iron. Solution equilibrium calculations suggested that the REE removal increase was realized through adsorption onto the surfaces of the ferric precipitates. The presence of aluminum species in the solutions reduced the adsorption of REEs on the ferric precipitates. Based on electro-kinetic test results, it was concluded that aluminum species neutralize the negative surface charge of the ferric precipitates and compete with REEs for the adsorption active sites. The presence of ferrous ions in the solutions reduced REE adsorption on the aluminum precipitates at lower pH values (e.g., 5.0) due to competitive adsorption. However, at higher pH values (e.g., 6.0), REE removal to the precipitate product increased due to the precipitation of ferrous ions. Additionally, to the electro-kinetic tests and solution equilibrium calculations, mineralogy characterization, specific surface area measurement, particle size analysis, and morphology analysis were also conducted to investigate and identify the partitioning mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Potassium carbonate decomposition modeling within rotating detonation engines for direct power extraction applications

We report that recently, there has been a significant interest in detonation-based combustion systems, such as rotating detonation engines (RDE), due to potential performance advantages in propulsion and energy applications. This includes improvements in thermodynamic efficiency, inherently high gas velocities, and the possibility of achieving an increase in total pressure (i.e. pressure gain) through the combustion process. Due to approximating a constant volume combustion process, these devices also tend to exhibit extremely high local gas temperatures relative to a comparable constant pressure combustor. These advantages overlap well with desirable performance characteristics of direct power extraction (DPE) technologies, such as a magnetohydrodynamic (MHD) generator. Typically, in DPE systems hot combustion products are seeded with an easily ionizable material such as potassium carbonate (K 2 CO 3 ) in order to boost the electrical conductivity. However, due to the short gas residence times within an RDE, it was unclear whether forming an electrically conductive combustion plasma would be feasible for integration with a downstream MHD generator. A model is presented which describes the heating, decomposition, and ionization of solid K 2 CO 3 particles and aqueous solutions of K 2 CO 3 in water, for a given initial particle diameter. This model was combined with available computational fluid dynamics (CFD) data for an oxygen-methane RDE in a one-way coupled Eulerian-Lagrangian framework to predict particle trajectories and the corresponding heating, decomposition, and ionization histories. Electrical conductivities were computed using a previously developed model, and a method was proposed to determine an equivalent average electrical conductivity. Results show that particle sizes below ~30 µm are able to fully decompose before reaching the exit of the RDE. While the one-way coupled nature of the simulations precluded rigorous evaluation of the effects of seed material on detonability, a substantial temperature reduction is expected at the detonation wave front due to heating and decomposition. A preliminary comparison is presented between the RDE and an equivalent constant pressure adiabatic combustor, showing a potential performance advantage for the RDE.

42 ENGINEERING↗
DOE OSTI2024

Consequences of plane-strain and plane-stress assumptions in fully coupled chemo-mechanical Li-ion battery models

In Li-ion battery research, it is common to simulate chemo-mechanical phenomena in reduced dimensions (e.g., 2-D) as opposed to fully resolve these complex physics in 3-D. It is common to assume either (1) the out-of-plane strain is negligible (commonly referred to as plane-strain), or (2) the out-of-plane stress is negligible (commonly referred to as plane-stress). However, there is typically little consideration as to the quantitative consequences of these approximations. Furthermore, the influence of these out-of-plane assumptions can be compounded and convoluted when chemo-mechanics models implement so-called “fully coupled” formulations, where the local species concentrations influence the stress-state and the stress-state influences the local species fluxes. Here, the present manuscript explores the implications of using plane-stress and plane-strain assumptions in 2-D as compared to simulating a full 3-D electrode particle. This comparative study includes simulating both isotropic and anisotropic particle intercalation where the particles can be surrounded by either a liquid or solid electrolyte. Additionally, common Li-ion battery-model metrics such as the state-of-stress, intercalation fraction distribution, and specific capacity are compared, while also considering the effects of particle size and C-rate. As alternatives to the pure plane-strain and plane stress approximations, two modified plane-strain assumptions are found to better approximate the fully coupled chemo-mechanical 3-D behavior.

25 ENERGY STORAGE↗
DOE OSTI2022

Optimal control to handle variations in moisture content and reactor in-feed rate

The variations in feedstock characteristics, such as moisture and particle size distribution, lead to an inconsistent flow of feedstock from the biomass pre-processing system to the reactor in-feed system. These inconsistencies result in low on-stream times at the reactor in-feed equipment. This research develops an optimal process control method for a biomass pre-processing system comprised of milling and densification operations to provide the consistent flow of feedstock to a reactor's throat. This method uses a mixed-integer optimization model to identify optimal bale sequencing, equipment in-feed rate, and buffer location and size in the biomass pre-processing system. This method, referred to as the hybrid process control (HPC), aims to maximize throughput over time. We compare HPC with a baseline feed forward process control. Our case study based on switchgrass finds that HPC reduces the variation of a reactor's feeding rate by up to 100% without increasing the operating cost of the biomass pre-processing system for biomass with moisture ranging from 10 to 25%. Additionally, HPC reduces the cost of processing biomass by 0.36%–2.22%, and reduces processing time by 0.35%-2.24%. Furthermore, a biorefinery can adapt HPC to achieve its design capacity.

09 BIOMASS FUELS↗
DOE OSTI2021

Understanding implications of cathode architecture on energy density of solid-state batteries

Next generation solid-state batteries (SSB) will need to leverage high voltage cathodes, as well as metallic anodes to achieve the realistic performance targets necessary to replace liquid electrolyte-based batteries in cutting-edge applications including electric vehicles. However, limitations arising from mass and charge transports, kinetics and chemo-mechanical degradation at the electrode | electrolyte interface limit the performance of present day SSBs. Optimizing composite cathode architecture, which is an integral part of solid-state batteries, is vital to realize the high-energy density and high-performance goals for next-generation solid-state batteries. Additionally, cathode architecture needs to be optimized for high loadings of active material, well-percolated ion and electron transport pathways and increased resilience against electrochemical stresses. This paper provides a first report of framework for geometric modeling of composite cathode architectures and evaluates the impact of cathode architecture on cell-level energy density using hierarchical models. Packing around primary and secondary active material particles are simulated for a range of active material particle size and solid electrolyte size distributions in the composite cathode. Impact of packing architecture on processing parameters of a given cathode composition and thickness, as well as on achievable energy density is evaluated for a range of commonly used solid electrolyte and cathode materials. Overall, the proposed framework offers a facile exploratory methodology for establishing initial metrics for scalable processing of practical and competent SSBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Design and processing for high performance Li ion battery electrodes with double-layer structure

A two-layer LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode has been designed and fabricated containing a “power layer” and “energy layer”, with corresponding porosity and particle size prescribed to each layer to achieve best utilization of electrode material (maximum integrated depth of discharge across the electrode thickness) at high applied current. The cathode showed a 17% improvement in capacity when tested in symmetric cells. When applying the design to a full cell, where both positive and negative electrodes contain power and energy layers, a 74% increase in discharge capacity at 2C was achieved compared to the cell with conventional electrodes. Furthermore, this demonstrates an avenue to increase energy and power density of lithium–ion batteries and enable fast charging capability.

25 ENERGY STORAGE↗
DOE OSTI2024

Kinetic assessment of pulp mill-derived lime mud calcination in high CO 2 atmosphere

The chemical pulping of biomass involves the recycling of calcium through the calcination of lime mud, which is mostly comprised of calcium carbonate (CaCO 3 ). Lime mud decomposes under elevated temperatures to generate calcium oxide (CaO) and carbon dioxide (CO 2 ), the kinetics of which are strongly influenced by the CO 2 partial pressure and temperature. Oxy-fuel combustion and electrified lime kilns for lime mud calcination are intriguing methods to decarbonize this highly polluting operation within the biomass pulping industry. However, the high CO 2 concentration in oxy-fuel and electrified calcination processes alters the kinetics and overall reactivity of lime mud. For the first time, a model-fitting method is used to determine the kinetic parameters for lime mud calcination under a wide range of temperatures (550 °C–1250 °C) and under different concentrations of CO2 (0 %, 15 %, 50 %, and 90 %). A kinetic model is developed that accurately predicts the reaction rates as a function of temperature and CO 2 concentration. The apparent activation of energy for lime mud calcination is elevated under a high CO 2 environment. Relative to inert gas (N 2 , Ar), the temperature window for calcination is much smaller under high CO 2 environments. The presence of Na in lime mud does not seem to affect calcination under a high CO 2 environment. Finally, particle size variation does not have a significant effect on calcination under a high CO 2 environment.

09 BIOMASS FUELS↗
DOE OSTI2020

Loss circulation prevention in geothermal drilling by shape memory polymer

Geothermal formations are naturally fractured with large fracture openings and networks. This can often lead to frequent drilling fluid loss events which is a major contributor to the cost and non-productive time in geothermal drilling. Development of smarter technologies and methods to tackle problem lost circulation is vital for geothermal drilling cost reduction required for geothermal energy to be recognized as a competitive alternative energy source. Mitigation of this problem and other drilling problems such as stuck pipe can minimize overall project cost. In this report, a thermoset shape memory polymer that can be activated by formation natural heat was assessed to seal near wellbore fractures in geothermal wells. The performance of the shape memory polymer (SMP) was evaluated using artificial fractures created in aluminum discs and cylindrical granite cores. Rheology and particle size distribution were considered. A novel testing setup was built for this work, which allows testing of sealing efficiency under dynamic conditions at high temperature. Analysis showed that the SMP has efficiently succeeded in forming a strong plug inside the fractures and stopped fluid loss at high sealing pressure. This smart loss circulation material can expand within the fractures to reduces non-drilling time and strengthen the wellbore in high-temperature drilling operations.

58 GEOSCIENCES↗
DOE OSTI2022

Physical and dynamical characterization of hyperbolic comet C/2017 U7 (PANSTARRS)

Here we present here a dynamical and observational study of the comet C/2017 U7 (PANSTARRS). This comet was discovered in 2017 and found to have a hyperbolic orbit. Our dynamical analysis shows that the object has probably originated in the Oort cloud, however an interstellar origin cannot be discarded. The observations were obtained in 2018 and 2019 using the Goodman High Throughput Spectrograph (GHTS) at the SOAR telescope. We obtained visible spectra covering the wavelength range of 0.5 - 0.9 μm and also images in the SDSS filters system. Both the low-resolution reflectance spectrum and the reflectance spectra derived from the SDSS filters show an atypical band at ~ 0.595 μm. We conducted a comparative study of the colors and reflectance spectra of different small body populations (e.g., comets, Centaurs, and trans-Neptunian objects or TNOs) from the literature and concluded that the spectra and the colors of this comet are atypical, showing only some overlap with those of some known members of the TNOs and Centaurs, within the large uncertainties of the measurements of those populations. It is found that the feature and overall spectral shape can be reproduced by laboratory spectra of kerite, a template for aliphatic-rich hydrocarbons that has been previously identified in NIR cometary spectra absorptions. It is tentatively proposed that the unusual spectral shape is the result of a particle size distribution of dust grains in the coma or on the surface that has arisen due to a low grain ejection velocity from the surface and large nucleus size.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Aerosol emissions from water-lean solvents for post-combustion CO 2 capture

Advanced water-lean solvents (WLS) for post-combustion CO 2 capture have been gaining interest due to their ability to reduce the parasitic penalty from energy needed for solvent regeneration. Commercial implementation of these novel CO 2 capture technologies hinges on successful control of amine emissions. RTI conducted a parametric study of fundamental and operational variables influence on overall amine aerosol and vapor emissions from our water-lean solvent eCO 2 Sol™ using our 6-kW equivalent bench-scale gas absorption system. The parametric testing used a simulated flue gas with 15 % CO 2 , 2.3–4.2 % H 2 O, and 0–6 ppm sulfite (SO 3 ) to examine the impact of the presence of aerosols to the capture performance and amine emissions from the system. The SO 3 reacts with water in the flue gas to create H 2 SO 4 , which forms liquid aerosol droplets and provide nucleation sites for growth of aerosols. Scanning Mobility Particle Sizer and Aerodynamic Particle Sizer instruments monitored the aerosol particle size distribution. Parametric testing results suggested that the presence of the aerosols in the flue gas could increase the overall amine emissions by 10X compared to the baseline emissions from WLS’s vapor pressure. Principal component analysis (PCA) and projection to latent squares (PLS) developed models to predict the aerosol-based amine emissions from process data. The predictive PLS model had a correlation coefficient (Q 2 ) of 0.92 and could predict the aerosol-based emissions from the NAS process with ±15 % accuracy (average absolute deviation, AAD). The PLS regression model also identified key variables affecting aerosol-based emissions from WLS.

42 ENGINEERING↗
DOE OSTI2024

Surface exsolving perovskite ceramics as catalyst for microwave methane pyrolysis to co-generate hydrogen and carbon nanotube

In this study, we have successfully developed a novel surface exsolving perovskite ceramic, which demonstrates the ability to simultaneously generate CO x -free hydrogen and carbon nanotubes (CNTs) through methane pyrolysis under the influence of microwave irradiation. We conducted an extensive survey and optimization of various perovskite materials specifically tailored for microwave applications. Among the materials investigated, nickel-doped strontium titanium oxide (STON) emerged as the most promising candidate, exhibiting both a satisfactory methane conversion rate and excellent responsiveness to microwave irradiation. Refinement of STON was carried out by fine-tuning the Ni content, optimizing the reduction dwell time, and adjusting the reduction temperature. Notably, SrTiNi 0.08 O 3 (STON8), demonstrated an impressive initial methane conversion rate of up to 40%. Transmission Electron Microscopy (TEM) provided visual evidence of the correlation between Ni content and reduction temperature, with respect to the exsolved Ni metal particle size. This finding highlights the immense potential of surface exsolving perovskite ceramics as a highly effective catalyst for the simultaneous production of CNTs and COx-free hydrogen via methane pyrolysis under microwave irradiation. Furthermore, it represents a step forward in the field of catalytic materials and microwave-driven processes.

08 HYDROGEN↗
DOE OSTI2026

Exploring the impact of nucleotide length on lipid nanoparticle structure and properties

Lipid nanoparticles (LNPs) are versatile carriers for nucleic acid (NA) therapeutics, including ASOs, siRNA, mRNA, and poly-IC. While lipid composition is known to influence LNP properties, the impact of NA length on morphology and internal structure is less understood, particularly during the stages of carrier–cargo assembly. Here, we examine NA length and lipid composition immediately after mixing using high-throughput SAXS, dynamic light scattering, and cryogenic electron microscopy. All LNPs form ordered NA/lipid compartments, with longer NAs promoting inverse hexagonal (H II ) phases and larger intercompartment distances. In contrast, short NAs, especially in formulations with SM102 ionizable lipid, favor lamellar phases. SAXS peak deconvolution quantifies ordered versus disordered phases via a Robustness of Ordered Phase factor, which correlates with particle size and encapsulation efficiency. Formulations with MC3 ionizable and DOPE helper lipids exhibit the most stable H II -phase packing, highlighting the role of helper-lipid curvature in compartment stabilization. Variations in NA compartmentalization indicate differences in payload capacity, offering a framework for rational LNP design across diverse nucleic acid cargos.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

A discrete dislocation dynamics study of precipitate bypass mechanisms in nickel-based superalloys

Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the $\gamma'$ precipitates distributed in the $\gamma$ matrix. Depending on the operating conditions and microstructure, a rich variety of bypass mechanism has been identified, with various shearing and Orowan looping processes gradually giving way to climb bypass as the operating conditions change from the low/intermediate temperatures and high stress regime, to the high temperature and low stress regime. When anti phase boundary (APB) shearing and Orowan looping mechanisms operate, the classical picture is that, at for a given volume fraction, the bypass mechanism changes from shearing to looping with increased particle size and within a broad coexistence size window. Another possibility, which is supported by indirect experimental evidence, is that a third “hybrid” transition mechanism may operate. Here, in this paper we use discrete dislocation dynamics (DDD) simulations to study dislocation bypass mechanisms in Ni-based superalloys. We develop a new method to compute generalized stacking fault forces in DDD simulations, based on a concept borrowed from complex analysis and known as the winding number of a closed curve about a point. We use this method to study the mechanisms of bypass of a square lattice of spherical $\gamma'$ precipitates by $a/2\langle110\rangle$ {111} edge dislocations, as a function of the precipitates volume fraction and size. We show that not only the hybrid mechanism is possible, but also that it operates as the transition mechanism between the shearing and looping regimes over a wide range of precipitates volume fraction and radii. Based on our simulation results, we propose a simple model for the strength of this mechanism. We also consider the effects of a $\gamma$/$\gamma'$ lattice misfit on the bypass mechanisms, which we approximate by an additional precipitate stress computed according to Eshelby’s inclusion theory. We show that in the shearing and hybrid looping-shearing regimes, a lattice misfit generally results in an increased bypass stress. For sufficiently high lattice misfit, the critical bypass configuration in attractive dislocation-precipitates interactions changes dramatically, and the bypass stress is controlled by the pinning of the trailing dislocation on the exit side of the precipitates, similar to what has been reported in the high-temperature creep literature.

36 MATERIALS SCIENCE↗