Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

A model of reduced kinetics for alkane oxidation using constituents and species: Proof of concept for n-heptane

A methodology for deriving a reduced kinetic mechanism for alkane oxidation is described and applied to n-heptane. The model is based on partitioning the species of the skeletal kinetic mechanism into lights, defined as those having a carbon number smaller than 3, and heavies, which are the complement in the species ensemble. For modeling purposes, the heavy species are mathematically decomposed into constituents, which are similar but not identical to groups in the group additivity theory. From analysis of the LLNL skeletal mechanism in conjunction with CHEMKIN II, it is shown that a similarity variable can be formed such that the appropriately scaled global constituent molar density exhibits a self-similar behavior over a very wide range of equivalence ratios, initial pressures and initial temperatures that is of interest for predicting n-heptane oxidation. Furthermore, the oxygen and water molar densities are shown to display a quasi-linear behavior with respect to the similarity variable. The light species ensemble is partitioned into quasi-steady and unsteady species. The concept is tested by using tabular information from the LLNL skeletal mechanism in conjunction with CHEMKIN II. The test reveals that the similarity concept is indeed justified and that the combustion temperature is well predicted, but that the ignition time is overpredicted. To palliate this deficiency, functional modeling is incorporated into our conceptual reduction. Due to the reduction process, models are also included for the global constituent molar density, the kinetics-induced enthalpy evolution of the heavy species, the contribution to the reaction rate of the unsteady lights from the heavies, the molar density evolution of oxygen and water, the mole fractions of the quasi-steady light species and the mean molar heat capacity of the heavy species. The model is compact in that there are only nine species-related progress variables. Results are presented comparing the performance of the model for predicting the temperature and species evolution with that of the skeletal mechanism. The model reproduces the ignition time over a wide range of equivalence ratios, initial pressure and initial temperature. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature induced immiscibility in the NaCl-H₂O system at high pressure

High-pressure polymorphs of H{sub 2}O are a major component in many outer planets, extra solar bodies, and icy satellites. This study sought to examine the influence of ionic impurities on the phase stability, thermal expansion, and melting curve of ice VII. Powder diffraction patterns of ice VII formed from pure H{sub 2}O and 5 wt.% NaCl aqueous solutions were taken at room temperature up to 11.1 {+-} 0.3 and 26.6 {+-} 0.4 GPa, respectively. Thermal expansions, {alpha}, of all ice VII samples were recorded and modeled up to the melting point of the samples. Ice VII formed from a NaCl-bearing aqueous solution at pressures greater than 2.2 GPa and less than 500 K can be indexed by ice VII only, whereas at temperatures greater than 500 K, diffraction lines indicative of halite (NaCl) are observed and become more intense with increasing temperature and only disappear at the melting point of the high-pressure ice. This phenomenon was observed in all NaCl-bearing ice samples that were heated to greater than 500 K. The melting curves of ice VII formed from pure H{sub 2}O and a 5 wt.% NaCl aqueous solution suggest that the presence of Na{sup +} and Cl{sup -} in the ice VII structure results in a depression of the melting curve by approximately 40 K. The exsolution of halite from the NaCl-doped ice VII and the depression of the ice VII melting curve suggest that the presence of ionic impurities in ice VII may promote the formation of a self-segregating zone deep within ice-rich bodies. This zone could initiate the formation of solute-rich melt pockets that may ascend toward the surface and result in surface manifestations such as solute-bearing aqueous vents, unexplained domes/diapirism, and/or salt-rich regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Fundamental Equation of State for 2-propanol (C{sub 3}H{sub 8}O) in the Extended Equation of State Format

An innovative method for the regression of a fundamental equation of state of a pure fluid was recently proposed. This technique, called an extended equation of state, adopts a framework similar to the extended corresponding states method but uses a cubic equation for the target fluid instead of the equation of state for the reference fluid, and shape functions are expressed through a multilayer feedforward neural network. The use of a neural network assures very high flexibility of the functional forms to be regressed, allowing the resulting model to represent the thermodynamic properties of a pure fluid with an accuracy comparable to that attained by state-of-the-art multiparameter equations of state. The technique is applied here to 2-propanol to derive a dedicated equation of state in a heuristic mode directly from the available experimental data. The majority of the data cover the range of temperatures from 280 to 600 K and pressures up to 50 MPa; this is also the validity range of the developed equation. For the present case, primarily due to the unfavorable situation of the data, all of the available thermodynamic properties have been used for the regression procedure in order to get the expected accuracy. The model has been validated with data for coexistence states, density, isobaric and isochoric heat capacities, and speed of sound. The obtained results are satisfactory because the proposed equation of state represents the available data within their mean experimental uncertainties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic phase transition in samarium hydrogen system SmH{sub x} (x=1, 2, 3)

We report ab-initio calculations for the structural and magnetic phase transition of SmH{sub x} (x= 1, 2, 3) using the Vienna ab-initio simulation package (VASP). The non-spin polarized (NSP) and spin polarized (SP) calculations are performed for these hydrides at normal and high pressure. It is found that these compounds are stable in ferromagnetic state at normal pressure. The calculated lattice parameters and bulk modulus of these hydrides are in good agreement with the available experimental results. A pressure-induced structural phase transition from cubic to hexagonal phase in SmH and SmH{sub 2} and hexagonal to cubic phase in SmH{sub 3} is predicted. A pressure-induced ferromagnetic to nonmagnetic phase transition is observed in SmH, SmH{sub 2} and SmH{sub 3} at the pressures of 104 GPa, 76 GPa and 81 GPa respectively. Ferromagnetism is quenched in mono, di and tri hydrides at high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure and temperature dependence of reactions proceeding via a bound complex. II - Application to 2CH3 yielding C2H5 + H

The pressure and temperature dependence of a reaction between two methyl radicals proceeding via ethane intermediate was modeled. Single-channel RRKM calculations were performed, based upon a hindered Gorin model for the transition state; the hindrance parameters were chosen to reproduce the high-pressure limiting rate constant from 300-1400 K. It is shown that the reaction between two methyl radicals may be characterized over wide ranges of temperature and pressure, using three analytical expressions of the type introduced by Troe (1979) for single-channel unimolecular processes.

Stewart, P. H.↗

Optimization of current waveform tailoring for magnetically driven isentropic compression experiments

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called “bricks,” that can be individually triggered to achieve a high degree of pulse tailoring for magnetically driven isentropic compression experiments (ICE) [D. B. Reisman et al., Phys. Rev. Spec. Top.–Accel. Beams 18, 090401 (2015)]. The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel “current-adder” architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We begin with magnetohydrodynamic simulations for a given material to determine its time dependent pressure and thus the desired strip-line load current and voltage. Because the bricks are connected to a central power flow section through transit-time isolated coaxial cables of constant impedance, the brick forward-going pulses are independent of each other. We observe that the desired equivalent forward-going current driving the pulse must be equal to the sum of the individual brick forward-going currents. We find a set of optimal brick delay times by requiring that the L{sub 2} norm of the difference between the brick-sum current and the desired forward-going current be a minimum. We describe the optimization procedure for the Thor design and show results for various materials of interest.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li 4 Ti 5 O 12

Lithium titanium oxide (Li 4 Ti 5 O 12 , LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO 6 and TiO 6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li + diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

25 ENERGY STORAGE↗

The bulk composition, mineralogy and internal structure of Mars

A bulk composition for Mars is derived to a pressure-dependent mineralogy. The density distribution of the present model is compared with density distributions derived from the global gravity field. It is argued that the uppermost Martian mantle is likely to be dominated by olivine and orthopyroxene, as is the earth's upper mantle, although the Martian mantle has a lower MgO/(MgO + FeO) ratio (0.74 vs 0.89). The olivine-peridotite layer extends to a depth of 900 to 1100 km where the transition to silicate spinel begins. Calculations of the high-pressure liquidus and solidus temperatures indicate that for the case of a molten core the minimum temperature at the core-mantle boundary is about 2000 K, whereas for the case of a solid core the maximum temperature is about 1800 K. Summation of the masses in the various layers of Mars yields a value of 0.353 for the dimensionless moment of inertia, which is intermediate between the generally accepted value of 0.365 and the value of 0.345 predicated on a nonaxisymmetric distribution of mass about the Tharsis plateau.

Longhi, John↗

HCCI experiments with gasoline surrogate fuels modeled by a semidetailed chemical kinetic model

Experiments in a homogeneous charge compression ignition (HCCI) engine have been conducted with four gasoline surrogate fuel blends. The pure components in the surrogate fuels consisted of n-heptane, isooctane, toluene, ethanol and diisobutylene and fuel sensitivities (RON-MON) in the fuel blends ranged from two to nine. The operating conditions for the engine were p{sub in}=0.1 and 0.2 MPa, T{sub in}=80 and 250 C, {phi}=0.25 in air and engine speed 1200 rpm. A semidetailed chemical kinetic model (142 species and 672 reactions) for gasoline surrogate fuels, validated against ignition data from experiments conducted in shock tubes for gasoline surrogate fuel blends at 1.0{<=} p{<=}5.0MPa, 700{<=} T{<=}1200 K and {phi}=1.0, was successfully used to qualitatively predict the HCCI experiments using a single zone modeling approach. The fuel blends that had higher fuel sensitivity were more resistant to autoignition for low intake temperature and high intake pressure and less resistant to autoignition for high intake temperature and low intake pressure. A sensitivity analysis shows that at high intake temperature the chemistry of the fuels ethanol, toluene and diisobutylene helps to advance ignition. This is consistent with the trend that fuels with the least Negative Temperature Coefficient (NTC) behavior show the highest octane sensitivity, and become less resistant to autoignition at high intake temperatures. For high intake pressure the sensitivity analysis shows that fuels in the fuel blend with no NTC behavior consume OH radicals and acts as a radical scavenger for the fuels with NTC behavior. This is consistent with the observed trend of an increase in RON and fuel sensitivity. With data from shock tube experiments in the literature and HCCI modeling in this work, a correlation between the reciprocal pressure exponent on the ignition delay to the fuel sensitivity and volume percentage of single-stage ignition fuel in the fuel blend was found. Higher fuel sensitivity and single-stage fuel content generally gives a lower value of the pressure exponent. This helps to explain the results obtained while boosting the intake pressure in the HCCI engine. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Air flow and pressure inside a pressure-swirl spray and their effects on spray development

Air flow and pressure inside a pressure-swirl spray for direct injection (DI) gasoline engines and their effects on spray development have been analyzed at different injector operating conditions. A simulation tool was utilized and the static air pressure at the centerline of the spray was measured to investigate the static pressure and flow structure inside the swirl spray. To investigate the effect of static air pressure on swirl spray development, a liquid film model was applied and the Mie-scattered images were captured. The simulation and experiment showed that recirculation vortex and air pressure drop inside the swirl spray were observable and the air pressure drop was greater at high injection pressure. At high fuel temperature, the air pressure at the nozzle exit showed higher value compared to the atmospheric pressure and then continuously decreased up to few millimeters distance from the nozzle exit. The pressure drop at high fuel temperatures was more than that of atmospheric temperature. This reduced air pressure was recovered to the atmospheric pressure at further downstream. The results from the liquid film model and macroscopic spray images showed that the air pressure started to affect the liquid film trajectory about 3 mm from the nozzle exit and this effect was sustained until the air pressure recovered to the atmospheric pressure. However, the entrained air motion and droplet size have more significant influence on the spray development after the most of the liquid sheet is broken-up and the spray loses its initial momentum. (author)

33 ADVANCED PROPULSION SYSTEMS↗

New correlation to predict the heat transfer coefficient in-tube cooling of supercritical CO{sub 2} in horizontal macro-tubes

The heat transfer coefficient during gas cooling process of supercritical CO{sub 2} without lubricating oil in horizontal macro-tubes has experimentally investigated. Investigation has done on two stainless steel circular tubes having inside-diameter of 4.55 mm and 7.75 mm and carried out for CO{sub 2} mass fluxes of 200-600 kg/m{sup 2} s, inlet fluid pressures of 7.5-10.0 MPa, and the inlet fluid temperatures of 90-100 C. The experimental results indicate that the gas cooling pressure, the inner tube diameter, the mass flux and the temperature of CO{sub 2} have significant effects on the heat transfer coefficient, especially near pseudo-critical region. The heat transfer coefficient decreases as the cooling pressure increases otherwise increases as mass flux increases. At any temperatures, smaller inner tube diameter shows higher heat transfer coefficient. In comparison between present experimental data and existing correlations from references, most of supercritical heat transfer correlations show large deviations with this present experimental data. Therefore, based on experimental data obtained in this present work, a new correlation is proposed to predict more accurate heat transfer coefficient of supercritical CO{sub 2} in horizontal macro-tubes under cooling conditions. The majority of the experimental values are within 13% of the values predicted by the new correlation. (author)

42 ENGINEERING↗

Theoretical Study of the Phenoxy Radical Recombination with the O( 3 P) Atom, Phenyl plus Molecular Oxygen Revisited

Quantum chemical calculations of the C 6 H 5 O 2 potential energy surface (PES) were carried out to study the mechanism of the phenoxy + O( 3 P) and phenyl + O 2 reactions. CASPT2(15e,13o)/CBS//CASSCF(15e,13o)/DZP multi-reference calculations were utilized to map out the minimum energy path for the entrance channels of the phenoxy + O( 3 P) reaction. Stationary points on the C 6 H 5 O 2 PES were explored at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311++G** level for the species with a single-reference character of the wave function and at the CASPT2(15e,13o)/CBS//B3LYP/6-311++G** level of theory for the species with a multi-reference character of the wave function. Conventional, variational, and variable reaction coordinate transition state theories were employed in Rice-Ramsperger-Kassel-Marcus Master Equation calculations to assess temperature- and pressure-dependent phenomenological rate constants and product branching ratios. Here, the main bimolecular product channels of the phenoxy + O( 3 P) reaction are concluded to be para/ortho-benzoquinone + H, 2,4-cyclopentadienone + HCO, and, at high temperatures, also phenyl + O 2 . The main bimolecular product channels of the phenyl + O 2 reaction include 2,4-cyclopentadienone + HCO at lower temperatures, and phenoxy + O( 3 P) at higher temperatures. Both for the phenoxy + O( 3 P) and phenyl + O 2 reactions, the collisional stabilization of peroxybenzene at low temperatures and high pressures competes with the bimolecular product channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LHDAC setup for high temperature and high pressure studies

A ytterbium fibre laser (λ = 1.07 μm) based laser heated diamond anvil cell (LHDAC) facility has been recently set up at HP and SRPD, BARC for simultaneous high temperature and high pressure investigation of material properties. Synthesis of GaN was carried out at pressure of ∼9 GPa and temperature of ∼1925 K in a Mao-Bell type diamond anvil cell (DAC) using the LHDAC facility. The retrieved sample has been characterized using our laboratory based micro Raman setup.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ Raman spectroscopy and high-speed photography of a shocked triaminotrinitrobenzene based explosive

We have developed a single-shot Raman spectroscopy experiment to study at the molecular level the initiation mechanisms that can lead to sustained detonation of a triaminotrinitrobenzene-based explosive. Shocks up to 30 GPa were generated using a two-stage laser-driven flyer plate generator. The samples were confined by an optical window and shock pressure was maintained for at least 30 ns. Photon Doppler Velocimetry measurements were performed at the explosive/window interface to determine the shock pressure profile. Raman spectra were recorded as a function of shock pressure and the shifts of the principal modes were compared to static high-pressure measurements performed in a diamond anvil cell. Our shock data indicate the role of temperature effects. Our Raman spectra also show a progressive extinction of the signal which disappears around 9 GPa. High-speed photography images reveal a simultaneous progressive darkening of the sample surface up to total opacity at 9 GPa. Reflectivity measurements under shock compression show that this opacity is due to a broadening of the absorption spectrum over the entire visible region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Yield strength of CeO 2 measured from static compression in a radial diamond anvil cell

Cerium oxide (ceria, CeO 2 ) is frequently used as a standard in applications such as synchrotron and x-ray free electron lasers for calibrating x-ray wavelengths and offers the potential for understanding the high pressure properties and deformation mechanisms in a wide range of similar face centered cubic (fcc) materials. In this study, the pressure dependence of the strength of ceria was investigated up to 38 GPa using angle dispersive x-ray diffraction in a radial geometry in a diamond anvil cell. In this experiment, the difference in the stress along the axis of compression and perpendicular to the direction of compression can be determined, giving a quantity known as the differential stress. It was found that the differential stress (t), a measure of the lower bound for yield strength, initially increases rapidly from 0.35 ± 0.06 GPa to 2.2 ± 0.4 GPa at pressures of 1.8 and 3.8 GPa, respectively. Above 4 GPa, t increases more slowly to 13.8 ± 2.6 GPa at a pressure of 38 GPa. The changes in the preferred orientation (texture) of CeO 2 with pressure were also measured, allowing for the determination of active deformation mechanisms using an elasto-viscoplastic self-consistent model (EVPSC). It was found that as pressure increased, the [001] direction had a slight preferred orientation along the axis of compression. Our EVPSC model of experimental fiber (cylindrically symmetric) textures and lattice strains were most consistent with dominant slip activity along ${111}$ $\langle$$1\bar10$$\rangle$.

36 MATERIALS SCIENCE↗

Watching a hydroperoxyalkyl radical (•QOOH) dissociate

A prototypical hydroperoxyalkyl radical (•QOOH) intermediate, transiently formed in the oxidation of volatile organic compounds, was directly observed through its infrared fingerprint and energy-dependent unimolecular decay to hydroxyl radical and cyclic ether products. Direct time-domain measurements of •QOOH unimolecular dissociation rates over a wide range of energies were found to be in accord with those predicted theoretically using state-of-the-art electronic structure characterizations of the transition state barrier region. Unimolecular decay was enhanced by substantial heavy-atom tunneling involving O-O elongation and C-C-O angle contraction along the reaction pathway. Master equation modeling yielded a fully a priori prediction of the pressure-dependent thermal unimolecular dissociation rates for the •QOOH intermediate—again increased by heavy-atom tunneling—which are required for global models of atmospheric and combustion chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of the reaction mechanism and kinetics of the phenyl + propargyl association

Potential energy surface for the phenyl + propargyl radical recombination reaction has been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory for the closed-shell singlet species and at the triplet–singlet gap CASPT2/cc-pVTZ-CCSD(T)-F12/cc-pVTZ-f12//CASSCF/cc-pVTZ level of theory for the diradical species. High-pressure limit rate constants for the barrierless channels were evaluated with variable reaction coordinate transition state theory (VRC-TST). Rice–Ramsperger–Kassel–Marcus Master Equation (RRKM-ME) calculations have been performed to assess temperature- and pressure-dependent phenomenological rate constants and product branching ratios. Here, the entrance channels of the radical association reaction produce 3-phenyl-1-propyne and phenylallene which can further dissociate/isomerize into a variety of unimolecular and bimolecular products. Theoretical evidence is presented that, at combustion relevant conditions, the phenyl + propargyl recombination provides a feasible mechanism for the addition of a second five-member ring to the first six-member aromatic ring producing the prototype two-ring species indene and indenyl. Rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗