Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

High-resolution Hard-x-ray Microscopy using Second-order Zone-plate Diffraction

Odd-order diffraction of zone plates (ZPs) is already used for x-ray microscopy but the potential offered by even-order diffraction must still be fully exploited. Width differences between lines and interline spaces transfer intensity from odd-order to even-order diffractions. Here we show that the resulting intense second-order diffraction provides a reasonable tradeoff between spatial resolution and intensity - and constitutes a viable strategy for x-ray microscopy to reach sub-20 nm resolution, in spite of the imperfections of high-aspect-ratio ZPs and of other difficulties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A PILOT SEARCH FOR EVIDENCE OF EXTRASOLAR EARTH-ANALOG PLATE TECTONICS

Relative to calcium, both strontium and barium are markedly enriched in Earth's continental crust compared to the basaltic crusts of other differentiated rocky bodies within the solar system. Here, we both re-examine available archived Keck spectra to place upper bounds on n(Ba)/n(Ca) and revisit published results for n(Sr)/n(Ca) in two white dwarfs that have accreted rocky planetesimals. We find that at most only a small fraction of the pollution is from crustal material that has experienced the distinctive elemental enhancements induced by Earth-analog plate tectonics. In view of the intense theoretical interest in the physical structure of extrasolar rocky planets, this search should be extended to additional targets.

79 ASTRONOMY AND ASTROPHYSICS↗

Electromagnetic transmission resonances for a single annular aperture in a metal plate

We present a theory for the reflection phase and amplitude of the lowest-order TEM mode in an annular aperture at the end of a metal plate. This reflection coefficient determines the frequency and peak width of the Fabry-Perot transmission resonances. The theory assumes that the width of the aperture is subwavelength; however, the annular radius can be quite large, and we show that the theory reproduces the reflection of a linear slit in the limit of infinite radius. Finite-difference time-domain calculations agree well with the theory, in terms of both the transmission resonance frequency values and the extracted reflectivity. The theory presented shows that both the phase and amplitude of reflection can vary substantially with changes in geometry and frequency, and that both are modulated by transverse resonances. This work has implications for filters, near-field aperture probes, sensors, and metamaterials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Making precise predictions of the Casimir force between metallic plates via a weighted Kramers-Kronig transform

The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for submicron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute {epsilon}(i{xi}). By making important improvements to the results of a previous paper by the author, it is shown that this difficulty can be resolved by considering suitable weighted dispersion relations, which strongly suppress the contribution of low frequencies. The weighted dispersion formulas presented in this paper permit us to estimate accurately the dielectric function of ohmic conductors for imaginary frequencies, on the basis of optical data extending from the IR to the UV, with no need for uncontrolled data extrapolations toward zero frequency that are necessary with standard Kramers-Kronig relations. Applications to several sets of data for gold films are presented to demonstrate the viability of the dispersion formulas presented in this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum and thermal Casimir interaction between a sphere and a plate: Comparison of Drude and plasma models

We calculate the Casimir interaction between a sphere and a plate, both described by the plasma model, the Drude model, or generalizations of the two models. We compare the results at both zero and finite temperatures. At asymptotically large separations we obtain analytical results for the interaction that reveal a nonuniversal, i.e., material-dependent interaction for the plasma model. The latter result contains the asymptotic interaction for Drude metals and perfect reflectors as different but universal limiting cases. This observation is related to the screening of a static magnetic field by a London superconductor. For small separations we find corrections to the proximity force approximation that support correlations between geometry and material properties that are not captured by the Lifshitz theory. Our results at finite temperatures reveal for Drude metals a nonmonotonic temperature dependence of the Casimir free energy and a negative entropy over a sizeable range of separations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the Short-Range Attractive Force between Ge Plates Using a Torsion Balance

We have measured the short-range attractive force between crystalline Ge plates, and found contributions from both the Casimir force and an electrical force possibly generated by surface patch potentials. Using a model of surface patch effects that generates an additional force due to a distance dependence of the apparent contact potential, the electrical force was parametrized using data at distances where the Casimir force is relatively small. Extrapolating this model, to provide a correction to the measured force at distances less than 5 {mu}m, shows a residual force that is in agreement, within experimental uncertainty, with five models that have been used to calculate the Casimir force.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensor network based vehicle classification and license plate identification system

Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

99 GENERAL AND MISCELLANEOUS↗

Assessment of the displacement field along a surface crack in a flat plate using optical techniques

Structural components may contain cracks, and for these components a crack tip represents a highly singular stress. The evaluation of the associated strain gradient is difficult to achieve with experimental discrete methods. An efficient alternative are the optical techniques which are non-contact, and so delivering continuous information of the displacement fields and associated derivatives for strain evaluation. This paper describes some experimental methods to fully characterize the displacement field near a crack tip existing in flat plates. Three optical field techniques based on image analysis were used in the present work; respectively, Electronic Speckle Pattern Interferometry, Moiré Interferometry, and Digital Image Correlation. These methods allow different resolutions which can be adjusted according to the expected strain gradient. While the first method depends on the laser wavelength and position of the illumination sources, the second depends on the grating pitch and the last on the surface texture or painted speckle. Algorithms to derivate and filtering the displacement field are developed to compute the strain field and will be used for further works.

36 MATERIALS SCIENCE↗

Effect of negative bias voltage on CrN films deposited by arc ion plating. I. Macroparticles filtration and film-growth characteristics

Chromium nitride (CrN) films were deposited on Si wafers by arc ion plating (AIP) at various negative bias voltages and several groups of N{sub 2}/Ar gas flux ratios and chamber gas pressures. The authors systematically investigated the influence of negative bias voltage on the synthesis, composition, microstructure, and properties of the AIP CrN films. In this part (Part I), the investigations were mainly focused on the macroparticle distributions and film-growth characteristics. The results showed that macroparticle densities on the film surfaces decreased greatly by applying negative bias voltage, which can be affected by partial pressure of N{sub 2} and Ar gases. From the statistical analysis of the experimental results, they proposed a new hybrid mechanism of ion bombardment and electrical repulsion. Also, the growth of the AIP CrN films was greatly altered by applying negative bias voltage. By increasing the bias voltage, the film surfaces became much smoother and the films evolved from apparent columnar microstructures to an equiaxed microstructure. The impinging high-energy Cr ions accelerated by negative bias voltages were deemed the inherent reason for the evolution of growth characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and properties of ZrN doped diamondlike carbon films prepared by pulsed bias arc ion plating

ZrN doped diamondlike carbon composite films with different compositions were deposited on cemented carbide substrates at different nitrogen flow rates by pulsed bias arc ion plating. Scanning electron microscopy results show that the film surfaces were all uniform, smooth, and dense. X-ray photoelectron spectroscopy reveal the C contents are more than 60%, the N content increases, and the Zr content decreases with increasing nitrogen flow rate. The Raman spectra indicated that the deposited films were diamondlike carbon. X-ray diffraction results suggested that a ZrN crystalline phase was also present in the films. The hardness and elastic modulus were closely related to the composition and structure of the films and decrease with increasing nitrogen flow rates, principally due to the increase in the sp{sup 2} content and the decrease in the ZrN crystalline phase.

36 MATERIALS SCIENCE↗

Samarium thin films molecular plated from N , N -dimethylformamide characterized by XPS

Characterization of samarium thin films molecular plated from N,N -dimethylformamide solutions onto stainless steel substrates, with either mirrorlike or brushed finishes, was carried out using a Thermo Scientific K-Alpha x-ray photoelectron spectrometer. Survey scans of the two specimens showed the presence of samarium, carbon, and oxygen with minor amounts of sodium. High-resolution spectra were then taken of the Sm 3 d , O 1 s , and C 1 s regions. Furthermore, the chemical compositions of the two samples were found to be very similar, with the key difference being the relative amounts of two carbon species. Spectra from the survey and narrow high-resolution scans of the Sm 3 d , O 1 s , and C 1 s regions are reported herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of microchannel plates using nano-scale additive manufacturing

Microchannel plate (MCP) detectors have been the workhorse detector for many applications, including space borne ultra-violet imaging and spectrographic instruments. Recent advances in additive manufacturing (AM) have enabled fabrication of complex structures with nano-scale resolution facilitating the production of highly customizable MCPs. Using AM to produce MCPs potentially has many advantages over traditional fused glass substrates, including better material control (e.g., more robust glasses or ceramics), better control of microscopic features (e.g., unique pore geometries to improve performance), and better control of macroscopic features (e.g., printing precision curved surfaces for focal plane matching). Through a collaboration with industry, national laboratory, and university partners, small format microcapillary array substrates were produced using a standard polymer photoresin. In conclusion, these substrates were functionalized using atomic layer deposition and their performance was compared to current state-of-the-art Pb-glass and borosilicate-glass MCPs.

36 MATERIALS SCIENCE↗

Growth from Solutions, Structure, and Photoluminescence of Single-Crystal Plates of p-Terphenyl and Its Trimethylsilyl Derivative

Samples of single-crystal plates of p-terphenyl (3Р) and its derivative with terminal substituents–Si(CH{sub 3}){sub 3} (TMS-3P-TMS), up to 25–30 mm in size and 400 μm thick, have been obtained for the first time by the solvent–antisolvent growth method. The crystal structure at temperatures of 293 and 85 K is refined for 3Р and solved (for the first time) for TMS-3P-TMS using X-ray diffraction. The habit of crystals and their surface morphology are investigated by methods of optical and laser confocal microscopy. The influence of substituent terminal groups -Si(CH{sub 3}){sub 3} on the growth and structure of TMS-3P-TMS crystals is analyzed based on experimental data. The optical absorption and photoluminescence spectra of solutions and crystalline samples are investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconducting plate in a transverse magnetic field: New state

A model is proposed for describing Cooper pairs near the transition (in temperature and magnetic field) point when their spacing is larger than their size. The essence of the model is as follows: the Ginzburg-Landau functional is written in operator form in terms of field operators of the Bose type so that the average value of the density operator gives the concentration of Cooper pairs, and the same Ginzburg-Landau expression is obtained for the Bose condensate. The model is applied to a superconducting plate with a thickness smaller than the size of a pair in a transverse magnetic field near its upper critical value H{sub c2}. A new state is discovered that is energetically more advantageous in a certain interval in the vicinity of the transition point as compared to the Abrikosov vortex state. The wavefunction of the system in this state is of the type of the Laughlin function used in the fractional quantum Hall effect (naturally, as applied to Cooper pairs as Bose particles in our case) and corresponds to a homogeneous incompressible fluid. The energy of this state is proportional to the first power of quantity (1 - H/H{sub c2}) in contrast to the energy of the vortex state containing the square of this quantity. The interval of the existence of the new state is the larger, the dirtier the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parametric electroconvection in a weakly conducting fluid in a horizontal parallel-plate capacitor

We study the flows of a nonuniformly heated weakly conducting fluid in an ac electric field of a horizontal parallel-plate capacitor. Analysis is carried out for fluids in which the charge formation is governed by electroconductive mechanism associated with the temperature dependence of the electrical conductivity of the medium. Periodic and chaotic regimes of fluid flow are investigated in the limiting case of instantaneous charge relaxation and for a finite relaxation time. Bifurcation diagrams and electroconvective regimes charts are constructed. The regions where fluid oscillations synchronize with the frequency of the external field are determined. Hysteretic transitions between electroconvection regimes are studied. The scenarios of transition to chaotic oscillations are analyzed. Depending on the natural frequency of electroconvective system and the external field frequency, the transition from periodic to chaotic oscillations can occur via quasiperiodicity, a subharmonic cascade, or intermittence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oxide Removal from the InSb Plate Surface to Produce Lateral Spin Valves

Abstracts: The formation conditions of a smooth and oxide-free surface of InSb semiconductor with the purpose of fabricating lateral spin devices based on it are investigated. The dry etching rate by Ar ions of the surface of the crystalline faces (100) of InSb plates as well as a variation in their roughness depending on the power supplied to ion etching devices are investigated. The degree of oxidation of the semiconductor surface exposed to air after ion cleaning and annealing in molecular hydrogen are evaluated. Based on comparison of the efficiency of spin injection in devices formed with semiconductors subjected to various types of treatment, a conclusion is made about the parameters of optimal preparation of the surface of the InSb wafers for the fabrication of lateral spin devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Mechanical Stresses in a D16 Aluminum-Alloy Plate on the Generation of Acoustic Waves under Laser Irradiation

Laser generation of ultrasound in metals with internal mechanical stresses has been analyzed. The characteristics of a photoacoustic signal in the vicinity of a hole in a D16 alloy plate under the action of mechanical stresses have been studied. The discrepancy between the experimental results and predictions of the thermodynamic model for the dependence of the thermal expansion coefficient on mechanical stresses was found. For proper description of the signal characteristics in real metals, we have proposed to take into account the influence of the electron subsystem on laser generation of acoustic waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on Sub-15 nm Hard X-Ray Focusing with a New Total-Reflection Zone Plate

Takano et al. report the focusing of 10-keV X-rays to a size of 14.4 nm using a total-reflection zone plate (TRZP). This focal size is at the diffraction limit for the optic's aperture. This would be a noteworthy result, since the TRZP was fabricated using conventional lithography techniques. Alternative nanofocusing optics require more demanding fabrication methods. However, as I will discuss in this Comment, the intensity distribution presented by Takano et al. (Fig. 4 of ref. 1) is more consistent with the random speckle pattern produced by the scattering of a coherent incident beam by a distorted optic than with a diffraction-limited focus. When interpreted in this manner, the true focal spot size is {approx}70 nm: 5 times the diffraction limit. When a coherent photon beam illuminates an optic containing randomly distributed regions which introduce different phase shifts, the scattered diffraction pattern consists of a speckle pattern. Each speckle will be diffraction-limited: the peak width of a single speckle depends entirely on the source coherence and gives no information about the optic. The envelope of the speckle distribution corresponds to the focal spot which would be observed using incoherent illumination. The width of this envelope is due to the finite size of the coherently-diffracting domains produced by slope and position errors in the optic. The focal intensity distribution in Fig. 4 of ref. 1 indeed contains a diffraction-limited peak, but this peak contains only a fraction of the power in the focused, and forms part of a distribution of sharp peaks with an envelope {approx}70 nm in width, just as expected for a speckle pattern. At the 4mm focal distance, the 70 nm width corresponds to a slope error of 18 {micro}rad. To reach the 14 nm diffraction limit, the slope error must be reduced to 3 {micro}rad. Takano et al. have identified a likely source of this error: warping due to stress as a result of zone deposition. It will be interesting to see whether the use of a more rigid substrate gives improved results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗