Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Investigations of high-energy electrons of the microwave discharge plasma at configuration of the 'Magnetor' Bi-dipole magnetic confinement system by X-ray radiation analyses

The results of the investigations of a group of fast electrons in a microwave discharge plasma in the 'Magnetor' magnetic trap are presented. The data on the presence and location of this group of electrons is important for estimating the total plasma pressure taking the previous probe measurements into account. Fast electrons are found to be localized within the magnetic separatrix in the region of confinement of the main plasma. The maximal energy of fast electrons is higher than 25 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Peculiarities of formation and development of initial stages of an impulse breakdown in argon

The experimental results on the formation and development of initial stages of an impulse breakdown in atmospheric-pressure argon at townsend and streamer breakdown mechanisms for different initial conditions are presented. A streamer channel is shown to be initiated by bright luminescence formed at the point of critical avalanche amplification at different distances from the cathode depending on overvoltage. Prebreakdown currents are experimentally measured for the townsend and streamer breakdown mechanisms and peculiarities of spark channel formation for these mechanisms are studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of the cathode and anode voltage drops in high power low-pressure amalgam lamps

For the first time, cathode and anode drops of powerful low-pressure amalgam lamps were measured. The lamp discharge current is 3.2 A, discharge current frequency is 43 kHz, linear electric power is 2.4 W/cm. The method of determination of a cathode drop is based on the change of a lamp operating voltage at variation of the electrode filament current at constant discharge current. The total (cathode plus anode) drop of voltage was measured by other, independent ways. The maximum cathode fall is 10.8 V; the anode fall corresponding to the maximal cathode fall is 2.4 V. It is shown that in powerful low pressure amalgam lamps the anode fall makes a considerable contribution (in certain cases, the basic one) to heating of electrodes. Therefore, the anode fall cannot be neglected, at design an electrode and ballast of amalgam lamps with operating discharge current frequency of tens of kHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the possibility to control ion generation and transport in a high-current vacuum spark

The possibilities of optimizing a high-current vacuum spark as a source of metal ions are discussed. The influence of the shape and size of the electrodes on both the depth to which the hot plasma region is immersed in the surrounding cold matter and the plasma state in the hot spot, which is the source of multicharged ions, is demonstrated. Methods for optimization of the design of the discharge device for increasing the ion yield from a high-current vacuum spark are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Specific features of an electric discharge operating between an electrolytic anode and a metal cathode

Results are presented from experimental studies of a high-current electric discharge operating between an St45 steel cathode and a service water anode in a wide range of air pressures. Peculiarities of discharge ignition and specific features of cathode and anode spots were revealed. The behavior of the current density on a service water anode was investigated for the first time. Comparison of the current densities j on the steel cathode and service water anode shows that, in the parameter range under study, Hehl's law is not satisfied on the water anode. The two-dimensional distribution of the potential inside and on the surface of the service water anode was measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of power characteristics of ion flow in plasma-etching reactor based on beam-plasma discharge

It is shown that on the basis of the earlier revealed effect of generating the ion flow in the beam-plasma discharge from the discharge axis, a plasma processing reactor can be created for low-energy etching of semiconductor structures. The possibility of easily controlling the density and energy of ion flow by means of varying the potential of the discharge collector is demonstrated. The charge compensation of the ion flow incident on the nonconducting surface is implemented using the modulation of the potential of the substrate holder as well as the plasma-potential modulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway electron beams in the gas discharge for UV nitrogen laser excitation

The review of the methods for obtaining the runaway electron beams in the gas discharge is performed. The new method is offered, using which the beam is first formed in a narrow gap ({approx}1 mm) between the cathode and the grid and then it is accelerated by the field of the plasma column of the anomalous self-sustained discharge in the main gap (10-20 mm long). The electron beams with an energy of about 10 keV and current density of 10{sup 3} A/cm{sup 2} at a molecular nitrogen pressure of up to 100 Torr have been obtained experimentally. The results of research of the UV nitrogen laser with an excitation via runaway electron beam and radiation of energy of {approx}1 mJ are given. The UV nitrogen laser generation with the energy of {approx}1 mJ has been obtained by the runaway electron beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical and experimental studies of the radiative properties of matter at high energy densities and their application to the problems of inertial confinement fusion

The paper presents the results of theoretical and experimental studies of the radiative properties of plasmas produced by heating and compression of various materials to high energy densities. The specific features of the theoretical plasma model known as the ion model, which is used to calculate the radiative characteristics of plasmas of complex chemical composition, are discussed. The theoretical approach based on this model is applied to the plasma produced during the explosion of the X-pinch wires. The theoretical estimate of the radiation efficiency is compared with the experimental data on the total energy yield from an X-pinch made of two different wires (NiCr and Alloy 188). The radiative characteristics of (C12 H16 O8) and (C8 H12 O6) plasmas are calculated for the temperature diagnostics of plasmas produced from porous targets employed in inertial confinement fusion experiments with the use of laser radiation and heavy-ion beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the barrier discharge structure near the electrode with a cylindrical cross section

The approximate analytical correlations allowing for the investigation of the effect of different geometrical and physical parameters on the barrier discharge evolution near the electrode with a cylindrical cross section are obtained. The found correlations make it possible to estimate the time of the barrier discharge existence. New essential peculiarities of the barrier discharge evolution are revealed and verified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Peculiarities of an electric discharge between an electrolytic cathode and a metal anode

Results from experimental studies of an electric discharge operating between a solid anode and an electrolytic cathode in a wide pressure range are presented. Specific features of the discharge ignition and discharge shape and peculiarities the structure of cathode spots on the electrolyte surface and anode spots on the surface of the solid electrode are revealed. The dependences of the current density on the electrolytic cathode and metal anode on the total current are measured, and the spatial distribution of the electric field is determined. A transition of a glow discharge into a multichannel discharge is investigated. The experimental data on the frequency and amplitude of the current and voltage pulsations are presented. Requirements for the maintenance of an electric discharge with an electrolytic cathode are formulated using the obtained experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of plasma inhomogeneities and their total suppression in a volume self-sustained discharge

The principle types of inhomogeneities formed in a volume self-sustained discharge are analyzed. Possible mechanisms and conditions for suppression of their development are considered. An ultimately homogeneous volume self-sustained discharge in CO{sub 2}: N{sub 2}: He mixtures where local plasma inhomogeneities are absent is obtained. At the energy contribution of 170 J/l, the duration of steady discharge burning in the CO{sub 2}: N{sub 2}: He = 1: 2: 3 mixtures at atmospheric pressure is 10 {mu}s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of electric discharges between moving electrodes in air

A barrier electric discharge excited between a fixed electrode and a rotating electrode covered with a dielectric layer in atmospheric-pressure air is studied experimentally. A distinctive feature of this type of discharge is that it operates at a constant voltage between the electrodes. An advantage of the proposed method for plasma generation in the boundary layer of the rotating electrode (e.g., for studying the influence of plasma on air flows) is the variety of forms of the discharge and conditions for its initiation, simplicity of the design of the discharge system, and ease of its practical implementation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the process of dust grain discharging in the afterglow of an RF discharge

The process of decay of dust structures formed of polydisperse grains injected into an RF discharge is investigated. The dust grain velocities after switching-off of the discharge are measured. The number density, dimensions, and residual charges of dust grains are estimated from the balance of forces acting on the grains after discharge is switched off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of inactive impurities on the burning of ICF targets

The efficiency of thermonuclear burning of the spherical deuterium-tritium (DT) plasma of inertial confinement fusion (ICF) targets in the presence of low-Z impurities (such as lithium, carbon, or beryllium) with arbitrary concentrations is investigated. The effect of impurities produced due to the mixing of the thermonuclear fuel with the material of the structural elements of the target during its compression on the process of target burning is studied, and the possibility of using solid noncryogenic thermonuclear fuels in ICF targets is analyzed. Analytical dependences of the ignition energy and target thermonuclear gain on the impurity concentration are obtained. The models are constructed for homogeneous and inhomogeneous plasmas for the case in which the burning is initiated in the central heated region of the target and then propagates into the surrounding relatively cold fuel. Two possible configurations of an inhomogeneous plasma, namely, an isobaric configuration formed in the case of spark ignition of the target and an isochoric configuration formed in the case of fast ignition, are considered. The results of numerical simulations of the burning of the DT plasma of ICF targets in a wide range of impurity concentrations are presented. The simulations were performed using the TEPA one-dimensional code, in which the thermonuclear burning kinetics is calculated by the Monte Carlo method. It is shown that the strongest negative effect related to the presence of impurities is an increase in the energy of target ignition. It is substantiated that the most promising solid noncryogenic fuel is DT hydride of beryllium (BeDT). The requirements to the plasma parameters at which BeDT can be used as a fuel in noncryogenic ICF targets are determined. Variants of using noncryogenic targets with a solid thermonuclear fuel are proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Picosecond runaway electron beams in air

Experimental data on the generation of picosecond runaway electron beams in an air gap with an inhomogeneous electric field at a cathode voltage of up to 500 kV are presented. The methods and equipment developed for these experiments made it possible to measure the beam characteristics with a time resolution of better than 10{sup -11} s, determine the voltage range and the beam formation time in the breakdown delay stage, and demonstrate the influence of the state of the cathode surface on the stability of runaway electron generation. It is demonstrated that the critical electron runaway field in air agrees with the classical concepts and that the accelerated beam can be compressed to {approx}20 ps. It is unlikely that, under these conditions, the beam duration is limited due to the transition of field emission from the cathode to a microexplosion of inhomogeneities. The maximum energy acquired by runaway electrons in the course of acceleration does not exceed the value corresponding to the electrode voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗